基于双功能单体的磁性双酚A印迹聚合物的制备及应用

以二氧化硅包覆的四氧化三铁为载体,双酚A(BPA)为模板分子,β-环糊精和4-乙烯基吡啶为二元功能单体,采用热聚合方法制备了对双酚A具有特异吸附性能的磁性印迹复合材料(mag-MIPs).采用透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)和振动样品磁强计(VSM)对该印迹复合材料进行了表征,并结合磁固相萃取(M-SPE)技术和高效液相色谱(HPLC)研究了其对双酚A的吸附行为,结果表明该印迹复合材料对双酚A具有良好的选择吸附能力.液相色谱检测结果表明,该磁性印迹复合材料可用于环境水样中双酚A的快速分离富集,回收率为90.51%~98.21%.     

粉煤灰基氧氟沙星分子印迹聚合物的制备及其固相萃取应用研究

以工业废料粉煤灰微球为基质,氧氟沙星(OFL)为模板分子,采用表面印迹法制备了分子印迹聚合物(MIP)材料。通过紫外光谱法结合理论分析选择实验条件,并对该印迹材料的结构、吸附行为进行研究。结果表明,该印迹材料对OFL具有良好的特异识别性和优良的亲和性。与以硅胶为载体制备的MIP相比,该材料吸附容量更高且印迹效果更好。将其作为固相萃取填料对鸡产品进行分离富集,与C18柱相比,分离富集效果更好。结合高效液相色谱,对实际样品中OFL进行分析,回收率为82.0%~96.7%,相对标准偏差低于5.5%,可用于鸡产品中OFL分离分析。     

分子印迹固相萃取牛奶中甲胺磷

以甲胺磷为印迹分子、α-甲基丙烯酸为功能单体及三羟甲基丙烷三丙烯酸酯为交联剂,通过悬浮聚合法制备甲胺磷分子印迹聚合物(MIP)微球,并用该聚合物进行了牛奶中甲胺磷残留的固相萃取研究.静态吸附实验表明,在结构相似物乙酰甲胺磷和水胺硫磷为竞争底物存在下,MIP对甲胺磷有良好的吸附识别能力.在优化条件下,印迹分子的固相萃取回收率达96.4%,能够用于甲胺磷的富集,而空白聚合物却不具备这样的特性.当实际牛奶样品中甲胺磷、乙酰甲胺磷和水胺硫磷加标水平为100μg/kg时,甲胺磷回收率达87.4%,乙酰甲胺磷和水胺硫磷的回收率低于15%.结果表明分子印迹固相萃取对甲胺磷有很好的专一选择性,且回收率能够满足农药残留分析要求.在相同实验条件下,与C18固相萃取柱进行比较,分子印迹固相萃取的选择性及样品净化能力优势明显.     

亲水性邻苯二甲酸二丁酯分子印迹聚合物的研制及应用

采用溶胶-凝胶技术,制备了邻苯二甲酸二丁酯(DBP)亲水性分子印迹聚合物(HYM IP)。静态吸附和选择性吸附实验表明,聚合物对DBP具有较高的吸附量与良好的特异吸附性。将其作为固相萃取填料,对水相样品中DBP的净化和富集效果优于C18柱。建立了亲水性分子印迹固相萃取结合高效液相色谱法检测化妆水中DBP的方法,检出限为4.46μg/kg,加标回收率在97.8%~98.7%之间,RSD小于2.4%。     

加替沙星分子印迹聚合物的制备及其应用

以加替沙星为模板分子,采用溶胶-凝胶分子印迹技术,合成具有分子识别作用的新型有机-无机杂化分子印迹聚合物,对其进行吸附性能研究证明了印迹聚合物对加替沙星的专一吸附性能。以该印迹聚合物为固相萃取材料填充固相萃取柱,优化固相萃取条件,结合超高效液相色谱法,对牛奶样品进行检测。建立了分子印迹固相萃取方法,分离富集并检测牛奶中的加替沙星,其回收率为79.87%,富集倍数为38,高于市售C18柱,具有一定的实际应用价值。     

分子印迹固相萃取-超高效液相色谱串联质谱法测定猪肉中磺胺二甲氧嗪EI北大核心CSCD

建立了基于分子印迹聚合物(MIPs)为固相萃取填料的固相萃取技术结合超高效液相色谱串联质谱法(MISPE-UPLC-MS/MS)检测猪肉中磺胺二甲氧嗪。以磺胺二甲氧嗪为模板分子,三氟甲基丙烯酸为功能单体,采用沉淀聚合法制备了分子印迹固相萃取填料,并对萃取净化条件进行了优化。在优化的提取条件和分析条件下,对猪肉肌肉样品中磺胺二甲氧嗪进行分析,其检出限为1.225μg/kg;定量限为4.083μg/kg;双水平回收率在81.4%~106.9%;RSD为3.7%和12%。与M CX柱净化相比,分子印迹固相萃取柱能够有效去除基质效应,分离待测物与杂质。     

分子印迹固相萃取-超高效液相色谱串联质谱法测定猪肉中磺胺二甲氧嗪

建立了基于分子印迹聚合物(MIPs)为固相萃取填料的固相萃取技术结合超高效液相色谱串联质谱法(MISPE-UPLC-MS/MS)检测猪肉中磺胺二甲氧嗪。以磺胺二甲氧嗪为模板分子,三氟甲基丙烯酸为功能单体,采用沉淀聚合法制备了分子印迹固相萃取填料,并对萃取净化条件进行了优化。在优化的提取条件和分析条件下,对猪肉肌肉样品中磺胺二甲氧嗪进行分析,其检出限为1.225μg/kg;定量限为4.083μg/kg;双水平回收率在81.4%~106.9%;RSD为3.7%和12%。与M CX柱净化相比,分子印迹固相萃取柱能够有效去除基质效应,分离待测物与杂质。     

磁性表面分子印迹聚合物的合成及其在玉米汁中检测玉米赤霉烯酮的应用北大核心CSCD

本研究以姜黄素为替代模板分子,Fe_(3)O_(4)@SiO_(2)-MPS为磁性载体,采用表面分子印迹技术制备了玉米赤霉烯酮(Zearalenone,ZEN)磁性分子印迹聚合物(ZEN-MMIPs)。使用傅立叶红外光谱(FTIR)、扫描电镜(SEM)、透射电镜(TEM)、振动样品磁强计(VSM)技术对制备的磁性分子印迹纳米微球进行表征。通过吸附动力学和吸附等温线考察了ZEN-MMIPs的吸附性能,其最大吸附容量为0.72 mg/g。以ZEN-MMIPs为磁性分散固相萃取剂,结合高效液相色谱(HPLC)完成了复杂食品基质中ZEN加标样品的痕量检测,线性范围为1~100 mg/L(R^(2)=0.9991),相对标准偏差(RSD)为2.11%,玉米汁样品加标回收率为88.3%~94.7%。本文所建立的方法可用于复杂基质实际样品中ZEN残留的检测。     

磁性吡嘧磺隆印迹聚合物的制备及性能研究

以包覆Si O2的Fe3O4为载体,吡嘧磺隆(PS)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,通过表面印迹法制备了磁性PS分子印迹聚合物(MIP),采用红外光谱、扫描电镜对其结构进行表征,采用吸附实验对其性能进行研究,并以MIP为固相萃取填料,结合高效液相色谱进行检测。结果表明,MIP对PS的饱和吸附量为68.94mg/g,印迹因子为2.49。将本方法应用于大米中PS残留分析,回收率在87.73%~99.57%范围内,相对标准偏差低于5.51%。所制备的MIP对样品中PS的富集、分离效果良好。     

核-壳型过氧化苯甲酰印迹溶胶-凝胶聚合物的制备及应用

以过氧化苯甲酰为模板分子,采用溶胶-凝胶印迹技术在自制的二氧化硅微球表面成功制备对过氧化苯甲酰具有特异性吸附能力的核-壳型印迹材料,并由红外光谱、扫描电镜和差热分析表征了印迹聚合物。该印迹微聚合物分散性好、热稳定好、平均粒径为300nm,印迹聚合物的壳层厚度为50nm。用高效液相色谱研究了印迹聚合物的吸附性能,结果表明该印迹聚合物对过氧化苯甲酰的选择系数为6.59。作为固相萃取材料,该印迹材料已被成功用于面粉中过氧化苯甲酰的分离和富集,回收率为94.98%。     

利用分子印迹技术预处理生物样品中头孢药物的研究

优化了头孢硫脒分子印迹聚合物的合成条件,探讨了分子印迹技术和固相萃取联用对血浆中头孢硫脒的分离富集,发现用4-乙烯基吡啶作功能单体合成的分子印迹聚合物作为固相萃取填充料,能定量吸附血浆中的头孢硫脒,并初步研究了其吸附机理。     

粉煤灰基氧氟沙星分子印迹聚合物的制备及其应用

以工业废料粉煤灰微球为基质,氧氟沙星 (OFL) 为模板分子,采用表面印迹法制备印迹材料MIP。通过紫外光谱法结合理论分析选择实验条件,并对该印迹材料结构、吸附行为进行研究。结果表明,该印迹材料对氧氟沙星具有良好的特异识别性和优良的亲和性。与以硅胶为载体制备的印迹聚合物相比,该材料吸附容量更高和印迹效果更好。将其作为固相萃取填料对鸡产品进行分离富集,与C18柱相比,分离富集效果更好。结合UPLC,对实际样品中氧氟沙星进行分析,回收率为82.0%-96.7%,相对标准偏差低于5.5%,可用于鸡产品中氧氟沙星分离分析。     

Selective trace analysis of chloroacetamide herbicides in food samples using dummy molecularly imprinted solid phase extraction based on chemometrics and quantum chemistry

A methodology based on chemometrics and quantum chemistry was proposed to design and synthesize dummy molecularly imprinted polymers (DMIPs) capable of extracting chloroacetamide herbicides from food samples. Molecular modeling approach in conjunction with clustering analysis was used to predict the most suitable dummy template. Metolachlor deschloro was selected as the template to synthesize DMIPs, which were used as the solid phase extraction (SPE) materials. The selective adsorption of DMIPs was evaluated by high performance liquid chromatography (HPLC). The retention property of six chloroacetamide herbicides on DMIPs was also predicted using clustering analysis. The optimum loading, washing and eluting conditions for dummy molecularly imprinted solid phase extraction (DMISPE) were established to obtain high selectivity and sensitivity. Water, dichloromethane and methanol were chosen as loading, washing and elution solvent, respectively. Under optimized DMISPE conditions, recoveries of analytes were in the range of 83.4–106.7% with satisfactory precision (RSD% lower than 13%). Compared with other commercial SPE columns, DMISPE exhibited selective binding properties for chloroacetamide herbicides and the matrix effect was significantly decreased.     

Preparation of l‐phenylalanine‐imprinted solid‐phase extraction sorbent by Pickering emulsion polymerization and the selective enrichment of l‐phenylalanine from human urine

A novel l‐ phenylalanine molecularly imprinted solid‐phase extraction sorbent was synthesized by the combination of Pickering emulsion polymerization and ion‐pair dummy template imprinting. Compared to other polymerization methods, the molecularly imprinted polymers thus prepared exhibit a high specific surface, large pore diameter, and appropriate particle size. The key parameters for solid‐phase extraction were optimized, and the result indicated that the molecularly imprinted polymer thus prepared exhibits a good recovery of 98.9% for l‐ phenylalanine. Under the optimized conditions of the procedure, an analytical method for l‐ phenylalanine was well established. By comparing the performance of the molecularly imprinted polymer and a commercial reverse‐phase silica gel, the obtained molecularly imprinted polymer as an solid‐phase extraction sorbent is more suitable, exhibiting high precision (relative standard deviation 3.2%, n = 4) and a low limit of detection (60.0 ± 1.9 nmol·L^?1) for the isolation of l‐ phenylalanine. Based on these results, the combination of the Pickering emulsion polymerization and ion‐pair dummy template imprinting is effective for preparing selective solid‐phase extraction sorbents for the separation of amino acids and organic acids from complex biological samples.     

尼泊金乙酯分子印迹固相萃取小柱的研制及应用

研制了一种对尼泊金乙酯具有特异性识别性能的分子印迹固相萃取小柱。用本体聚合法制备尼泊金乙酯分子印迹聚合物,通过静态平衡吸附实验及固相萃取实验表征其固相萃取性能,并结合UV法对滴眼液中的尼泊金乙酯进行测定。结果显示,尼泊金乙酯模板聚合物的吸附能力强于空白聚合物;印迹固相萃取柱对尼泊金乙酯标准溶液(0.04mmol/L)一...     

Determination of donepezil in serum samples using molecularly imprinted polymer nanoparticles followed by high‐performance liquid chromatography with ultraviolet detection

A molecularly imprinted polymer designed for the selective extraction of donepezil from serum samples was synthesized using a noncovalent molecular imprinting approach. The molecularly imprinted polymer was evaluated chromatographically and then its affinity for donepezil was confirmed by solid‐phase extraction. The optimal conditions for solid‐phase extraction were provided by cartridge conditioning using acidified water purified from a Milli‐Q system, sample loading under basic aqueous conditions, clean‐up using acetonitrile, and elution with methanol/tetrahydrofuran. Desirable molecular recognition properties of the molecularly imprinted polymer led to good donepezil recoveries (90–102%). The data indicated that the imprinted polymer has a perfect selectivity and affinity for donepezil and could be used for selective extraction and analysis of donepezil in human serum.     

Molecularly Imprinted Polymers for Solid Phase Extraction

The combination of molecularly imprinted polymers (MIPs) and solid phase extraction (SPE) is reviewed. MIPs, which have high selectivity and affinity for a predetermined molecule (template), have been used as sorbents for SPE to selectively isolate analytes from biological, pharmaceutical, and environmental samples. Solid phase extraction with molecularly imprinted polymers (MIP–SPE) is a promising technique which allows specific analytes to be selectively extracted from complex matrices. This survey summarizes the characteristics, development and application of MIP–SPE in recent years. Existed problems and the future direction of MIP–SPE are also discussed.     

Development of andrographolide molecularly imprinted polymer for solid-phase extraction

A method employing molecularly imprinted polymer (MIP) as selective sorbent for solid-phase extraction (SPE) to pretreat samples was developed. The polymers were prepared by precipitation polymerization with andrographolide as template molecule. The structure of MIP was characterized and its static adsorption capacity was measured by the Scatchard equation. In comparison with C(18)-SPE and non-imprinted polymer (NIP) SPE column, MIP-SPE column displays high selectivity and good affinity for andrographolide and dehydroandrographolide for extract of herb Andrographis paniculata (Burm.f.) Nees (APN). MIP-SPE column capacity was 11.9±0.6 μmol/g and 12.1±0.5 μmol/g for andrographolide and dehydroandrographolide, respectively and was 2-3 times higher than that of other two columns. The precision and accuracy of the method developed were satisfactory with recoveries between 96.4% and 103.8% (RSD 3.1-4.3%, n=5) and 96.0% and 104.2% (RSD 2.9-3.7%, n=5) for andrographolide and dehydroandrographolide, respectively. Various real samples were employed to confirm the feasibility of method. This developed method demonstrates the potential of molecularly imprinted solid phase extraction for rapid, selective, and effective sample pretreatment.     

替代模板分子印迹技术在样品前处理中的应用

分子印迹聚合物具有抗恶劣环境、选择性高、稳定性好等特点,广泛应用于复杂样品的前处理。采用结构类似物作为替代模板分子,可以解决分子印迹聚合物制备时目标物溶解性差的问题,替代模板分子印迹聚合物不仅对目标分析物具有选择性识别能力,还可以避免模板泄露对痕量分析造成的影响。本文综述了替代模板分子印迹技术在样品前处理中的应用进展,包括替代模板分子印迹技术在固相萃取、固相微萃取、色谱固定相、基质固相分散萃取中的应用,最后对替代模板分子印迹技术在未来的样品前处理中的研究进行了展望。     

Facile preparation of polydopamine‐coated imprinted polymers on the surface of SiO2 for estrone capture in milk samples

Estrone molecularly imprinted polymers were synthesized through the self‐polymerization of dopamine on the surface of silica gels, which had the characteristics of mild polymerization conditions, simple reaction procedure and good specific recognition ability for estrone. The estrone molecularly imprinted polymers were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis and nitrogen adsorption–desorption tests. The characterization confirmed that the imprinted polymers were successfully grafted on the surface of silica gels. Through investigating the adsorption performance, the prepared estrone molecularly imprinted polymers exhibited high adsorption capacity, fast mass transfer, as well as excellent selectivity toward estrone. The estrone molecularly imprinted polymers as the solid‐phase extraction adsorbent coupled with high‐performance liquid chromatography was developed to determine estrone from the milk samples. The developed estrone molecularly imprinted polymer solid‐phase extraction with high‐performance liquid chromatography method exhibited satisfactory specificity, precision, accuracy and good linearity relationship in the range of 0.2–20 μg/mL. The developed method is simple, fast, effective and high specificity method and it provides a new method to detect the residues of estrone in animal foods.