A microfluidic approach for measuring capillary pressure in PEMFC gas diffusion layers

A dearth of experimental capillary pressure data limits our understanding and optimization of liquid water transport in PEMFC gas diffusion layers (GDLs). A microfluidic device and method is described for measuring the capillary pressure as a function of liquid water saturation for these thin porous materials with complex, heterogeneous wetting properties. A sample sandwich (hydrophilic membrane–GDL–hydrophobic membrane) is key for probing the entire hydrophilic and hydrophobic pore volume of the GDL during sequential liquid intrusion and gas intrusion experiments. The capillary pressure curves for an as-purchased Toray 090 and two differentially-processed Avcarb P75T GDLs were evaluated; each material displayed highly repeatable, but quantitatively different, room temperature capillary pressure curves that matched qualitative differences in their macroscopic wettability. The measurements show that hysteresis between the liquid intrusion and gas intrusion curves is significant. For example, both the Toray and fully wet-proofed Avcarb GDLs appear hydrophobic during most of the liquid intrusion curve and hydrophilic during most of the gas intrusion curve. The implications of this work for water management, and future device designs and experiments are described.     

不同浸润性多孔电极表面的气泡行为

采用氢气模板法制备了具有多孔结构的电极; 通过改变电镀电流密度和电镀时间实现了电极表面多孔结构孔径和分布的控制; 通过改变表面化学组成有效调控了电极表面的浸润性质. 比较了具有不同微观结构和表面化学组成的电极在给定条件下电解水过程中气泡的产生及行为机制. 实验结果表明: 相对于亲水的多孔电极, 疏水的多孔电极表面能够黏附气泡, 更易倾向于形成稳定的气膜; 多孔结构对于亲水电极表面气泡行为的影响比对疏水电极表面气泡行为的影响更为显著; 与没有多孔结构的亲水电极相比, 具有多孔结构的亲水电极表面产生的气泡数量多, 速率快; 与较小孔径的多孔亲水电极相比, 较大孔径的多孔亲水电极表面产生气泡速率快且黏附气泡数量少. 该研究结果为微气泡减阻电极的设计提供了理论依据.     

Porous structure and hydrophilic-hydrophobic properties of gas diffusion layers of the electrodes in proton-exchange membrane fuel cells

The porous structure and hydrophilic-hydrophobic properties of the gas diffusion layers (GDL) of electrodes on a substrate of carbon paper in proton-exchange membrane fuel cells have been investigated with the methods of standard porosimetry and of pycnometry. GDL containing various fluoroplast concentrations were impregnated with water, and this process has been investigated at 20 and 80°C. The impregnation rate is significantly higher for untreated carbon paper than for teflonated GDL and also increases significantly with increasing temperature. With teflonization of the carbon paper, hydrophilic porosity decreases, while hydrophobic porosity increases. This increase, however, ceases at high fluoroplast concentrations. The concept of hydrophobization effectiveness of the porous carbon substrate of GDL is introduced. It has been established that hydrophobization effectiveness decreases with increasing fluoroplast concentration and depends on the type of suspension. Curves of the angle of wetting of GDL by water versus the pore radius exhibit a minimum. Different values of the angle of wetting of GDL by water in different pores are explained by nonuniform distributions of both fluoroplast particles and hydrophilic surface groups in pores of different dimensions.     

Transport of a liquid water and methanol mixture through carbon nanotubes under a chemical potential gradient

In this work, we report a dual-control-volume grand canonical molecular dynamics simulation study of the transport of a water and methanol mixture under a fixed concentration gradient through nanotubes of various diameters and surface chemistries. Methanol and water are selected as fluid molecules since water represents a strongly polar molecule while methanol is intermediate between nonpolar and strongly polar molecules. Carboxyl acid (-COOH) groups are anchored onto the inner wall of a carbon nanotube to alter the hydrophobic surface into a hydrophilic one. Results show that the transport of the mixture through hydrophilic tubes is faster than through hydrophobic nanotubes although the diffusion of the mixture is slower inside hydrophilic than hydrophobic pores due to a hydrogen network. Thus, the transport of the liquid mixture through the nanotubes is controlled by the pore entrance effect for which hydrogen bonding plays an important role.     

Lab-on-chip methodologies for the study of transport in porous media: energy applications

We present a lab-on-chip approach to the study of multiphase transport in porous media. The applicability of microfluidics to biological and chemical analysis has motivated much development in lab-on-chip methodologies. Several of these methodologies are also well suited to the study of transport in porous media. We demonstrate the application of rapid prototyping of microfluidic networks with approximately 5000 channels, controllable wettability, and fluorescence-based analysis to the study of multiphase transport phenomena in porous media. The method is applied to measure the influence of wettability relative to network regularity, and to differentiate initial percolation patterns from active flow paths. Transport phenomena in porous media are of critical importance to many fields and particularly in many energy-related applications including liquid water transport in fuel cells, oil recovery, and CO(2) sequestration.     

Wettability control and patterning of PDMS using UV-ozone and water immersion

We demonstrate a simple method to tune and pattern the wettability of polydimethylsiloxane (PDMS) to generate microfluidic mimics of heterogeneous porous media. This technique allows one to tailor the capillary forces at different regions within the PDMS channel to mimic multi-phase flow in oil reservoirs. In this method, UV-ozone treatment is utilized to oxidize and hydrophilize the surface of PDMS. To maintain a stable surface wettability, the oxidized surfaces are immersed in water. Additionally, the use of a photomask makes it convenient to pattern the wettability in the porous media. A one-dimensional diffusive reaction model is established to understand the UV-ozone oxidation as well as hydrophobic recovery of oxidized PDMS surfaces. The modeling results show that during UV-ozone, surface oxidation dominates over diffusion of low-molecular-weight (LMW) species. However, the diffusivity of LMW species plays an important role in wettability control of PDMS surfaces.     

Wetting of β-casein layers adsorbed at the solid–aqueous interface

The wetting by water of the adsorbed layer of β-casein on hydrophobised silica and pure (hydrophilic) silica surface was investigated by dynamic contact angle measurements based on the Wilhelmy plate principle. The results are discussed in relation to adsorption data obtained for the protein on similar surfaces by in situ ellipsometry. β-casein adsorption on a hydrophobic surface leads to a significant decrease of the contact angle, in particular in terms of the receding contact angle, which decreased by about 70°. This indicates a strong shielding of the hydrophobic surface by the hydrophilic domain of β-casein. Adding a specific enzyme, endoproteinase Asp-N, which previously has been proposed to remove a large fraction of the hydrophilic segments, results in a significantly decreased wettability of the solid surface. The layer is now more hydrophobic and the hysterises is much smaller. The receding contact angle after the proteolysis is roughly 70°. The results are consistent with the hypothesis that β-casein adsorbs at the hydrophobic surface to form a monolayer with the hydrophobic part of the protein anchored at the surface, leaving the hydrophilic segments dangling into the solution. Less dramatic effects are observed in terms of changes of the wettability on the hydrophilic surface. The surface is still quite hydrophilic both after adsorbing β-casein and exposing the layer to endoproteinase Asp-N. These results confirm the differences in the structure of β-casein layers on the hydrophobic and hydrophilic surface.     

Ionic Liquids Can Permanently Modify Porous Silicon Surface Chemistry

To develop ionic liquid/porous silicon (IL/pSi) microarrays we have contact pin‐printed 20 hydrophobic and hydrophilic ionic liquids onto as‐prepared, hydrogen‐passivated porous silicon (ap‐pSi) and then determined the individual IL spot size, shape and associated pSi surface chemistry. The results reveal that the hydrophobic ionic liquids oxidize the ap‐pSi slightly. In contrast, the hydrophilic ionic liquids lead to heavily oxidized pSi (i.e., ox‐pSi). The strong oxidation arises from residual water within the hydrophilic ILs that is delivered from these ILs into the ap‐pSi matrix causing oxidation. This phenomenon is less of an issue in the hydrophobic ILs because their water solubility is substantially lower.     

湿润率对疏水性膜接触器传质性能的影响

根据双膜理论提出了疏水性膜湿润机理,关联了阻力层方程、Laplace方程和膜孔径分布函数,建立了新型传质数学模型,采用PP疏水性微孔膜、水和MDEA(N-甲基二乙醇胺)水溶液为吸收剂,研究了膜接触器吸收CO₂传质过程,考察了压差、表面张力和温度等因素所产生的湿润率对传质性能的影响.结果表明,用新型模型能较准确地预测湿润率对传质系数的影响,模型值与实验值符合较好;压差、表面张力和温度对湿润率影响较大,是膜接触器传质过程需要考虑的因素.     

Novel combination of hydrophilic/hydrophobic surface for large wettability difference and its application to liquid manipulation

This paper reports a novel combination of hydrophilic/hydrophobic materials for the evolution of liquid manipulation. Droplet generation based on a hydrophilic/hydrophobic mechanism is a promising method for highly accurate liquid manipulations. Although several droplet manipulation devices utilizing hydrophilic/hydrophobic patterns have been reported, it has been difficult to split fluid into droplets solely through hydrophilic/hydrophobic patterns in a microchannel. In this study, a material combination for fabricating hydrophilic/hydrophobic patterns was investigated and their wettability difference was enhanced for droplet generation. To improve hydrophilicity, we attempted to increase the surface area of silicon oxide through pulsed plasma chemical vapor deposition (PPCVD). To improve hydrophobicity, the damage to the hydrophobic patterns in the fabrication process was reduced. We successfully enhanced the difference in contact angles from 54.3° to 86.6° by combining the developed hydrophilic material and hydrophobic material. The developed material combination could successfully split fluid into a quantitative droplet of 14.1 nL in a microfluidic chip. Because the developed hydrophilic/hydrophobic combination enables the formation of a droplet with desirable shape in microchannels, the developed hydrophilic/hydrophobic combination is a promising component for lab-on-a-chip applications.     

微液滴的非机械驱动

微液滴的非机械驱动是操纵微小尺雨液体流动的新方法。本文介绍当前有关微液滴非机械驱动的研究进展，包括：利用电化学方法产生并消耗表面活性分子来产生表面张力梯度；把表面浸润性梯度和温度梯度相结合；通过光敏化合物偶氮部分顺反异构的转换导致表面自由能的变化，最后由光照来驱动微液滴，以及利用固体基片上的亲水疏水条纹构建微芯片上实验室的液体非机械输送网络。     

特殊浸润性表面的液滴凝结

以铝片为基底, 经电化学腐蚀和沸水处理制备了多级微纳米结构; 通过气相沉积和涂油分别制备了超疏水表面、 疏水超润滑(slippery)表面和亲水slippery表面; 探究了表面不同的特殊浸润性(超亲水、 超疏水、 疏水slippery和亲水slippery)对液滴凝结的影响. 结果表明, 超亲水表面的液滴凝结属于膜状冷凝, 超疏水表面和slippery表面的液滴凝结均属于滴状冷凝. 超疏水表面液滴合并时, 合并的液滴会不定向弹离表面. 疏水slippery表面和亲水slippery表面由于表面浸润性的不同导致液滴成核密度和液滴合并的差异, 亲水slippery表面凝结液滴的最大体积远大于疏水slippery表面凝结液滴的最大体积. 4种表面的雾气收集效率由大到小依次为亲水slippery表面>疏水slippery表面>超亲水表面>超疏水表面.     

润湿特性对超级电容器储能动力学的影响机理

润湿特性对超级电容器储能性能有着至关重要的影响。借助分子动力学模拟,本文研究了润湿特性对超级电容器储能动力学行为的影响。以石墨烯和晶体铜作为疏电解液和亲电解液电极材料。结果表明,在充电过程中,亲电解液铜电极呈现出非对称的U型微分电容曲线,负极电容是正极的～5.77倍,不同于经典双电层理论Gouy-Chapman-Stern(对称U型)和疏电解液型。该现象与离子自由能阻力分布密切相关,负极自由能阻力远小于正极(～2倍)和疏电解液电极,进而有利于强化双电层结构对电极电压的响应能力,导致更高微分电容。通过微分离子电荷密度,本文再现了微分电容演变规律,并发现改善润湿性会显著降低双电层厚度。最后,我们指出润湿性直接影响储能微观机理,将电荷储存机制从离子吸附和交换共同主导(疏电解液)转变到离子吸附主导(亲电解液)。本文所得结论揭示了润湿特性对储能动力学行为影响的原子层级机理,对超级电容器材料设计、构筑与润湿特性调控具有重要指导意义。     

The preparation and characterization of amphiphilic core/shell particles

Colloidal amphiphilic particles were prepared with hydrophilic polyacrylamide cores encapsulated by hydrophobic poly(butyl methacrylate) shells. The hydrophobic shell possessed a porous structure, which made the hydrophilic core accessible to the outside liquid. The amphiphilicity of the particles was characterized by their water and diesel oil absorbabilities. The effect of the polymerization conditions on the structure and thickness of the hydrophobic layer was investigated in some detail. Such amphiphilic particles can be dispersed in both water and hydrophobic liquids, and the dispersions have a long life in water and a more moderate one in oil.     

Water harvest via dewing

Harvesting water from humid air via dewing can provide a viable solution to a water shortage problem where liquid-phase water is not available. Here we experimentally quantify the effects of wettability and geometry of the condensation substrate on the water harvest efficiency. Uniformly hydrophilic surfaces are found to exhibit higher rates of water condensation and collection than surfaces with lower wettability. This is in contrast to a fog basking method where the most efficient surface consists of hydrophilic islands surrounded by hydrophobic background. A thin drainage path in the lower portion of the condensation substrate is revealed to greatly enhance the water collection efficiency. The optimal surface conditions found in this work can be used to design a practical device that harvests water as its biological counterpart, a green tree frog, Litoria caerulea , does during the dry season in tropical northern Australia.     

贻贝启发功能改性的明胶基海绵止血材料的制备与性能

由战争、手术等而造成的大出血通常会导致更大的伤痛或更高的死亡率,因此,非常需要及时有效的止血以减少创伤导致死亡.而目前的止血材料都存在止血速度慢、止血效果差等问题.为提高材料的止血效率,本文受贻贝启发使用多巴胺和赖氨酸接枝改性的明胶(GDL)和氧化葡聚糖(ODE)为原料,通过冷冻干燥法制备多孔海绵状止血材料(GDL/O...     

Porous polymer membranes via selectively wetted surfaces

Here, we show that porous polymeric membranes can be prepared using the principles of offset printing: an offset printing plate is structured into hydrophobic and hydrophilic regions with the help of photolithography and is selectively wetted with a solution of calcium chloride in water at the hydrophilic regions. Then, a polymer solution (poly(methyl methacrylate) in chloroform) is applied to this surface and forms a hydrophobic layer that is structured by the aqueous droplets. Deviating from standard offset printing, this layer is not transferred to another surface in its liquid state but is solidified and subsequently is separated from the printing plate. The thickness of the polymer film is chosen in such a way that the aqueous droplets on the surface protrude from the film. Thus, we obtain polymer membranes with pores in the size of the protruding aqueous droplets. These membranes are then characterized by the filtration of model dispersions.     

Investigating the interface of superhydrophobic surfaces in contact with water

Neutron reflectivity (NR) is used to probe the solid, liquid, vapor interface of a porous superhydrophobic (SH) surface submerged in water. A low-temperature, low-pressure technique was used to prepare a rough, highly porous organosilica aerogel-like film. UV/ozone treatments were used to control the surface coverage of hydrophobic organic ligands on the silica framework, allowing the contact angle with water to be continuously varied over the range of 160 degrees (superhydrophobic) to <10 degrees (hydrophilic). NR shows that the superhydrophobic nature of the surface prevents infiltration of water into the porous film. Atomic force microscopy and density functional theory simulations are used in combination to interpret the NR results and help establish the location, width, and nature of the SH film-water interface.     

Wettability of a Polymethylmethacrylate Surface by Extended Anionic Surfactants: Effect of Branched Chains

The adsorption behaviors of extended anionic surfactants linear sodium dodecyl(polyoxyisopropene)₄ sulfate (L-C₁₂PO₄S), branched sodium dodecyl(polyoxyisopropene)₄ sulfate (G-C₁₂PO₄S), and branched sodium hexadecyl(polyoxyisopropene)₄ sulfate (G-C₁₆PO₄S) on polymethylmethacrylate (PMMA) surface have been studied. The effect of branched alkyl chain on the wettability of the PMMA surface has been explored. To obtain the adsorption parameters such as the adhesional tension and PMMA-solution interfacial tension, the surface tension and contact angles were measured. The experimental results demonstrate that the special properties of polyoxypropene (PO) groups improve the polar interactions and allow the extended surfactant molecules to gradually adsorb on the PMMA surface by polar heads. Therefore, the hydrophobic chains will point to water and the solid surface is modified to be hydrophobic. Besides, the adsorption amounts of the three extended anionic surfactants at the PMMA–liquid interface are all about 1/3 of those at the air–liquid interface before the critical micelle concentration (CMC). However, these extended surfactants will transform their original adsorption behavior after CMC. The surfactant molecules will interact with the PMMA surface with the hydrophilic heads towards water and are prone to form aggregations at the PMMA–liquid interface. Therefore, the PMMA surface will be more hydrophilic after CMC. In the three surfactants, the branched G-C₁₆PO₄S with two long alkyl chains exhibits the strongest hydrophobic modification capacity. The linear L-C₁₂PO₄S is more likely to densely adsorb at the PMMA–liquid interface than the branched surfactants, thus L-C₁₂PO₄S possesses the strongest hydrophilic modification ability and shows smaller contact angles on PMMA surface at high concentrations.     

Influence of water on the surface of hydrophilic and hydrophobic room-temperature ionic liquids

Vibrational spectroscopy, sum frequency generation, has been used to study the gas-liquid interface of imidazolium-based, room-temperature ionic liquids. The ionic liquids are divided into two categories on the basis of their miscibility with water, as hydrophobic (immiscible) and hydrophilic (miscible). The spectroscopy results indicate that water will reorient the cations of the hydrophobic ionic liquid, while in the hydrophilic ones they remain unaffected. Thus, under low water conditions the plane of the imidazolium ring remains parallel to the surface for both types of ionic liquid. However, at high water content the ring will reorient to along the surface normal for the hydrophobic ionic liquid but remain parallel to the surface for the hydrophilic one. This is a reversible process.