Synthesis of 5-functionalized-1,2,3-triazoles via a one-pot aerobic oxidative coupling reaction of alkynes and azicles

In this paper, an efficient synthesis of 5-alkynyl-1,2,3-triazoles through a one-pot aerobic oxidative coupling reaction of various alkynes and azides has been developed. Further derivatization of 5-alkynyl-1,2,3-triazoles readily yielded 5-carbonyl-1,2,3-triazoles, 5-carboxylic-1,2,3-triazole, 5-hydroxyalkyl-1,2,3-triazoles and 5-quinoxaline-1,2,3-triazole, which provided an entry into structurally diverse 5-functionalized-1,2,3-triazoles.     

Synthesis of 5-functionalized-1,2,3-triazoles via a one-pot aerobic oxidative coupling reaction of alkynes and azides

In this paper, an efficient synthesis of 5-alkynyl-1,2,3-triazoles through a one-pot aerobic oxidative coupling reaction of various alkynes and azides has been developed. Further derivatization of 5-alkynyl-1,2,3-triazoles readily yielded 5-carbonyl-1,2,3-triazoles, 5-carboxylic-1,2,3-triazole, 5-hydroxyalkyl-1,2,3-triazoles and 5-quinoxaline-1,2,3-triazole, which provided an entry into structurally diverse 5-functionalized-1,2,3-triazoles.     

Trimethylsilyl-directed 1,3-dipolar cycloaddition reactions in the solid-phase synthesis of 1,2,3-triazoles

[reaction: see text] A regioselective method for the preparation of 1,5-trisubstituted 1H-1,2,3-triazoles via a 1,3-dipolar cycloaddition of 1-trimethylsilylacetylenes with organoazides is described. Immobilization of the azide on REM resin and subsequent cycloaddition afforded a 2 x 2 x 4 x 3 membered 1,5-disubstituted 1H-1,2,3-triazole library with an average purified yield of 68%.     

Quantum chemical study of the tautomerism, geometry, and electronic structure of 1,2,3- and 1,2,4-triazoles

A systematic study was carried out on the tautomerism and geometry of 1,2,3- and 1,2,4-triazoles using the semiempirical AM1, PM3, MNDO, and MINDO/3 methods and nonempirical quantum chemical methods taking account of electronic correlation (MP2). The semiempirical methods were found to give incorrect results for the tautomerism of these triazoles, while the nonempirical methods correctly give the energy relationships and show enhanced stability for 2H-1,2,3- and 1H-1,2,4-triazoles attributed to the interaction of the unpaired electron pairs of the adjacent nitrogen atoms. Optimization of the geometry of 2H-1,2,3-triazole by the nonempirical methods showed that bases such as 6-21G and more expanded bases must be used and that electronic correlation should be taken into account. The use of updated calculation methods in the case of 1H-1,2,4-triazole did not give improved results.Prof. Asen Zlatarov University, 8010 Burgas, Bulgaria. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 645–651, May, 1998.     

Synthesis of 4-aryl-1H-1,2,3-triazoles through TBAF-catalyzed [3 + 2] cycloaddition of 2-aryl-1-nitroethenes with TMSN3 under solvent-free conditions

TBAF-catalyzed [3 + 2] cycloaddition reactions of 2-aryl-1-cyano- or 2-aryl-1-carbethoxy-1-nitroethenes 1 with TMSN3 under SFC allow the corresponding 4-aryl-5-cyano- or 4-aryl-5-carbethoxy-1H-1,2,3-triazoles 2 to be prepared under mild reaction conditions and with good to excellent yields (70-90%). The proposed protocol does not require dried glassware or inert atmosphere.     

CuO-promoted construction of N-2-aryl-substituted-1,2,3-triazoles via azide-chalcone oxidative cycloaddition and post-triazole arylation

An efficient one-pot three-component stepwise approach for the synthesis of N-2-aryl-substituted-1,2,3-triazoles has been developed. By using this azide-chalcone oxidative cycloaddition and post-triazole arylation, a series of N-2-aryl-substituted-1,2,3-triazoles are readily prepared under mild conditions in excellent yields and high regioselectivity. Both the catalyst and substrates are readily available.     

Practical one-pot synthesis of 5-alkynyl-1,2,3-triazoles via heterogeneous copper(I)-catalyzed tandem three-component click/alkynylation reaction

An efficient and practical route to 5-alkynyl-1,2,3-triazoles has been developed via heterogeneous tandem CuAAC/alkynylation reaction of organic azides, alkynes and 1-bromoalkynes by using an L-proline-functionalized MCM-41-anchored copper(I) complex [L-Proline-MCM-41-CuCl] as catalyst under mild conditions. The reaction produces a wide variety of 5-alkynyl-1,2,3-triazoles in mostly good to excellent yields. The new immobilized copper(I) complex can be readily prepared from commercially available and inexpensive reagents and displays the same catalytic activity as CuCl. The L-Proline-MCM-41-CuCl catalyst is also easy to recover via a simple filtration process and can be reused at least seven times without apparent loss of activity.     

Fluorinated heterocyclic compounds. An effective strategy for the synthesis of fluorinated Z-oximes of 3-perfluoroalkyl-6-phenyl-2h-1,2,4-triazin-5-ones via a ring-enlargement reaction of 3-benzoyl-5-perfluoroalkyl-1,2,4-oxadiazoles and hydrazine

The reaction of 3-benzoyl-5-perfluoroalkyl-1,2,4-oxadiazoles with hydrazine has been investigated, evidencing the possibility of competitive reaction paths. Nucleophilic addition of the hydrazine to the electrophilic C(5) of the 1,2,4-oxadiazole ring, followed by ring opening and ring closure with enlargement, leads with high yield and in very mild experimental conditions to the formation of Z-oximes of 3-perfluoroalkyl-6-phenyl-2H-1,2,4-triazin-5-ones (11a-c) as major products of the reaction. In turn, the hydrazine can attack the electrophilic carbonyl carbon giving 4-perfluoroacylamino-5-phenyl-2H-1,2,3-triazoles (13a-c) through the well-known Boulton-Katritzky rearrangement of the intermediate hydrazones.     

Glycosylthiomethyl chloride: a new species for S-neoglycoconjugate synthesis. Synthesis of 1-N-glycosylthiomethyl-1,2,3-triazoles

Reaction of O-acyl-protected glycosylthiols with dichloromethane afforded readily glycosylthiomethyl chlorides, which gave with sodium azide the corresponding glycosylthiomethyl azides 17-22. Reaction of these azides with dicyclopentadiene as dipolarophile led to tandem 1,3-dipolar cycloaddition/retro-Diels-Alder reaction furnishing the parent 1-glycosylthiomethyl-1,2,3-triazoles 23-25. Reaction of azides with acetylene derivatives gave directly 1-glycosylthiomethyl-1,2,3-triazoles which are ring-substituted.     

Peptidotriazoles on solid phase: [1,2,3]-triazoles by regiospecific copper(i)-catalyzed 1,3-dipolar cycloadditions of terminal alkynes to azides

The cycloaddition of azides to alkynes is one of the most important synthetic routes to 1H-[1,2,3]-triazoles. Here a novel regiospecific copper(I)-catalyzed 1,3-dipolar cycloaddition of terminal alkynes to azides on solid-phase is reported. Primary, secondary, and tertiary alkyl azides, aryl azides, and an azido sugar were used successfully in the copper(I)-catalyzed cycloaddition producing diversely 1,4-substituted [1,2,3]-triazoles in peptide backbones or side chains. The reaction conditions were fully compatible with solid-phase peptide synthesis on polar supports. The copper(I) catalysis is mild and efficient (>95% conversion and purity in most cases) and furthermore, the X-ray structure of 2-azido-2-methylpropanoic acid has been solved, to yield structural information on the 1,3-dipoles entering the reaction. Novel Fmoc-protected amino azides derived from Fmoc-amino alcohols were prepared by the Mitsunobu reaction.     

Microwave-assisted Synthesis of New 1,2,3-Triazoles Bearing an Isoxazole Ring by the Azide-alkyne Cycloaddition Click Chemistry

A comparison synthesis of 1,2,3-triazoles bearing isoxazole ether was developed between conventional and microwave-assisted heating. Single/double 1,2,3-triazoles bearing isoxazole ether were synthesized by click reaction starting from substituted isoxazolyl alkyne compounds and substituted benzyl azide compounds or neopentylglycol diazide in the presence of copper(I) that in-situ generated. Herein, the effect of different catalysts on the yield was researched by conventional method, and the optimal catalyst was selected. The structures of all the synthesized compounds were confirmed by MS, FTIR, ¹H and ¹³C NMR spectroscopies. Moreover, the crystal structure of 5-{[(1-benzyl-1H-1,2,3-triazol-4-yl)methoxy]methyl}-3-(4-fluorophenyl)isoxazole(2h) was determined.     

DFT calculations of CH acidity of substituted triazoles and experimental study of their ability to undergo mercuration

The CH acidity of all possible N-methyl substituted nitrotriazoles as well as of some 4-substituted 1,2,3-triazoles and N-alkyl-4-nitro-1,2,3-triazoles in the gas phase and in THF and DMSO solution has been calculated with the density functional theory B3LYP method. Electronic effects of substituents on the CH acidity of 4-substituted 1,2,3-triazoles have been examined using linear free energy relationship (LFER) methodology. In order to investigate the relation between the CH acidity of the heterocycles and their ability to undergo electrophilic substitution involving C-H bond cleavage, we have studied the reaction of isomeric N-alkyl-4-nitro-1,2,3-triazoles (alkyl=methyl, ethyl, isopropyl and tert-butyl) with HgBr₂ in alkali solution. It was found that 1-isomers undergo mercuration readily, while mercuration of 2-substituted compounds do not occur under the same conditions, which is in agreement with the results of DFT calculations of the CH acidity of the compounds, showing that 2-isomers have considerably lower CH acidity than 1-isomers.     

Design and the synthesis of 1-heteroaryl-1,2,3-triazoles connected to coumarins via ether linker

In this paper, we report an efficient and versatile methodology for the synthesis of a series of novel heteroaryl-1,2,3-triazoles connected to 4-methylcoumarin (4-methyl-2H-chromen-2-one) via oxymethylene linker. The desired molecules were accessed by both two-step synthesis and the one-pot copper catalyzed cycloaddition reaction of heteroaromatic azides with coumarin containing acetylenes. The developed protocol was found to be facile and effective for preparing a series of novel heteroaryl-1,2,3-triazole-coumarin conjugates in excellent yields. Practical utility of one-pot protocol has been confirmed by the successful gram-scale synthesis of 1,3-Dimethyl-6-(4-[([4-methyl-2-oxo-2H-chromen-7-yl]oxy)methyl]-1H-1,2,3-triazol-1-yl)pyrimidine-2,4(1H,3H)-dione.     

Synthesis of derivatives of 5-amino-4-acyl-1,2,3-triazole, 8-azapurine,and 1,2,3-triazolo[4,5-b]pyridin-7-one using N,N-acetals of acylketenes and tosylazide

By reaction of N,N-acetals of acylketenes with tosylazide there were synthesized 5-amino-4-acyl-1,2,3-triazoles substituted at the endo(N¹)- or exocyclic nitrogen atom. Triazoles containing a free NH₂ group were used in the synthesis of the corresponding 8-azapurines and 4-acetyl-5-benzoylamino-1,2,3-triazole afforded 2-methyl-2H,4H-1,2,3-triazolo[4,5-b]pyridin-7-one.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1392–1397, June, 1990.     

Direct synthesis of 1,5-disubstituted-4-magnesio-1,2,3-triazoles, revisited

After revisiting earlier works reporting the regioselective synthesis of 1,5-disubstituted-1,2,3-triazoles via the addition of bromomagnesium acetylides to azides, much improved yields of the products were obtained for a wide array of azides and alkynes. The intermediates of that reaction can be trapped with different electrophiles to regioselectively form 1,4,5-trisubstituted 1,2,3-triazoles. [reaction: see text]     

Arylation of Rhodium(II) Azavinyl Carbenes with Boronic Acids

A highly efficient and stereoselective arylation of in situ-generated azavinyl carbenes affording 2,2-diaryl enamines at ambient temperatures has been developed. These transition-metal carbenes are directly produced from readily available and stable 1-sulfonyl-1,2,3-triazoles in the presence of a rhodium carboxylate catalyst. In several cases, the enamines generated in this reaction can be cyclized into substituted indoles employing copper catalysis.     

Ruthenium-catalyzed cycloaddition of aryl azides and alkynes

The formation of 1,5-disubstituted 1,2,3-triazoles from aryl azides and alkynes was readily accomplished using [Cp*RuCl]4 catalyst in dimethylformamide. It was also demonstrated that the reaction provided higher yields, cleaner product, and shorter reaction times when carried out under microwave irradiation.     

Polymer-Supported Azide and Copper(I): Green Reusable Reagent and Catalyst for Click Cyclization

In this work, polymer-supported copper(I) iodide catalyst and macroporous polymer-supported azide reagent were used to simplify the synthesis of 1,4-disubstituted-1H-1,2,3-triazoles from α-bromo ketones/amides/esters following green chemistry principles. This new one-pot protocol facilitates the workup of the reaction and provides the products in short times and excellent yields. Heterogeneous catalyst and reagent can be reused at least for five runs without significant yield decreases.     

Sequential one-pot ruthenium-catalyzed azide-alkyne cycloaddition from primary alkyl halides and sodium azide

An experimentally simple sequential one-pot RuAAC reaction, affording 1,5-disubstituted 1H-1,2,3-triazoles in good to excellent yields starting from an alkyl halide, sodium azide, and an alkyne, is reported. The organic azide is formed in situ by treating the primary alkyl halide with sodium azide in DMA under microwave heating. Subsequent addition of [RuClCp*(PPh(3))(2)] and the alkyne yielded the desired cycloaddition product after further microwave irradiation.     

NH-1,2,3-三唑合成进展

NH-1,2,3-三唑是一类具有重要生理活性的含氮杂环化合物, 是用途广泛的药物中间体. 通过N-烃基化反应, NH-1,2,3-三唑还可以区域选择性的合成各种2-取代-1,2,3-三唑类化合物, 因此是有价值的有机合成中间体. 鉴于NH-1,2,3-三唑在有机合成化学和药物化学中的潜在应用价值, 结合本课题组的研究工作, 对于NH-1,2,3-三唑的主要合成方法, 尤其是近十年来的合成研究进展进行了回顾和展望. 对一些典型的反应机理研究也进行了综述.