Large volume preconcentration and purification for determining the240Pu/<Superscript>239</Superscript>Pu isotopic ratio and <Superscript>238</Superscript>Pu/<Superscript>239+240</Superscript>Pu alpha-activity ratio in seawater

Summary The present paper describes a new analytical method for determining the ²⁴⁰Pu/²³⁹Pu isotopic ratio and ²³⁸Pu/^239+240Pu α -activity ratio in seawater, both of which are important parameters for determining Pu sources in the ocean. Plutonium isotopes were preconcentrated from a large volume of seawater (4700-10800 liter) by solid phase extraction using MnO₂-impregnated fibers and eluted into 3M HCl. After the elution, the Pu species of all oxidation states were converted to Pu(IV) using NaNO₂, purified by solvent extraction using thenoyltrifluoroacetone (TTA)-benzene, and concentrated in 5 ml of 0.2M HNO₂. The ²⁴⁰Pu/²³⁹Pu and ²³⁸Pu/^239+240Pu ratios in the 5-ml final solution were determined by inductively coupled plasma-mass spectrometry (ICP-MS) and α-spectrometry, respectively. A pg level of Pu, which was a sufficiently large amount for the determination, was obtained by the solid phase extraction. Through the redox conversion and solvent extraction, the Pu species, such as Pu(III), Pu(IV) and Pu(VI), were collected at a high recovery of 96±2% (n=3) despite the presence of large amounts of Mn, and interfering ²³⁸U (3.3 μg^. l^-1in seawater) was effectively removed with a decontamination factor of 1.7·10⁷. The accuracy of the method for the ²⁴⁰Pu/²³⁹Pu ratio was verified using reference materials of seawater and a terrestrial soil sample. The present technique was applied to the determination of the ²⁴⁰Pu/²³⁹Pu and ²³⁸Pu/^239+240Pu ratios in coastal and oceanic water.     

Purification and separation of <Superscript>239+240</Superscript>Pu and <Superscript>241</Superscript>Am in biological samples by anion-exchange and extraction chromatography for high resolution alpha-spectrometry analyses

Many biological samples (urines and faeces) have been analyzed by means of chromatographic extraction columns, utilizing two different resins (AG 1-X2 resin chloride and TRU), in order to detect the possible internal contamination of ^239+240Pu and ²⁴¹Am for some workers of a reprocessing nuclear plant in the decommissioning phase. The results obtained show on one hand the great suitability of the first resin for the determination of plutonium, and on the other, the great selectivity of the second one for the determination of americium.     

Determination of 238Pu, 239+240Pu and 241Am in air filters

The aim of this work is to present the method for sequential plutonium and americium activity determination in air filters using chromatographic radionuclide separation and alpha spectrometry measurement. The developed method may be employed for the purposes of workplace monitoring and as an indicator of the need of introducing the individual monitoring as well as a useful complementation of individual monitoring. Basic parameters describing the developed method such as values of chemical recoveries and minimum detectable activities for plutonium and americium isotopes have been determined. Applied counting efficiency was obtained using Monte Carlo calculation method.

     

Radioanalytical approach to determine 238Pu, 239+240Pu, 241Pu and 241Am in soils

The simultaneous determination of multiple actinide isotopes in samples where total quantity is limited can sometimes present a unique challenge for radioanalytical chemists. In this study, re-determination of ²³⁸Pu, ^239+240Pu, and ²⁴¹Am for soils collected and analyzed approximately three decades ago was the goal, along with direct determination of ²⁴¹Pu. The soils had been collected in the early 1970’s from a shallow land burial site for radioactive wastes called the Subsurface Disposal Area (SDA) at the Idaho National Lab (INL), analyzed for ²³⁸Pu, ^239+240Pu, and ²⁴¹Am, and any remaining soils after analysis had been archived and stored. We designed an approach to reanalyze the ²³⁸Pu, ^239+240Pu, and ²⁴¹Am and determine for the first time ²⁴¹Pu using a combination of traditional and new radioanalytical methodologies. The methods used are described, along with estimates of the limits of detection for gamma-and alpha-spectrometry, and liquid scintillation counting. Comparison of our results to the earlier work documents the ingrowth of ²⁴¹Am from ²⁴¹Pu, and demonstrates that the total amount of ²⁴¹Am activity in these soil samples is greater than would be expected due to ingrowth from ²⁴¹Pu decay.     

Intertidal mangrove mudflat <Superscript>240+239</Superscript>Pu signatures,confirming a <Superscript>210</Superscript>Pb geochronology on the southeastern coast of Brazil

A sediment core was taken to determine if sediment accumulation rates could be conducted using ^240+239Pu signatures in the coastal mangrove mudflats of southeastern Brazil. The results from this study show that ^240+239Pu fallout activities are sufficient and well preserved in the coastal sediments of this region. Sediment accumulation rates determined from the ^240+239Pu signatures were 4.4 mm/year and 4.1 from ²¹⁰Pb (CIC) method. A sediment mixing coefficient rate was calculated using chlorophyll-a profile (9.5 cm²).     

Attempt to reduce <Superscript>239</Superscript>Pu and <Superscript>241</Superscript>Am uptake by wheat plantlets by application of inorganic fertilizers

Inorganic fertilizers are applied to reduce plant uptake of anthropogenic radionuclides, but scarce data are available for ²³⁹Pu and ²⁴¹Am. Wheat plantlets were grown in laboratory on limited amount of soil with ²³⁹Pu, ²⁴¹Am and different application rates of NPK and diammonium phosphate (DAP). As rates increased, the uptake of ²³⁹Pu and ²⁴¹Am to the whole plantlet also increased. It was higher for DAP than for NPK, (higher supply of P₂O₅ and NH₄ ⁺). Root content was higher than shoots for all experiences, suggesting low mobility within the plantlet. Root content increased with fertilizer rate, but practically no effect in shoots.     

Radioactivity in the Exclusive Economic Zone of east coast Peninsular Malaysia: distribution trends of <Superscript>137</Superscript>Cs in surface seawater

Large volumes of surface seawater samples were collected from thirty locations in the Exclusive Economic Zone (EEZ) of the east coast Peninsular Malaysia on June 2008 to study the activity concentrations of ¹³⁷Cs. The results will serve as additional information to the existing baseline data and is very useful for monitoring fresh input of anthropogenic radionuclide into Malaysian marine environment. In this study, the activity concentrations of ¹³⁷Cs were determined using co-precipitation technique, followed by Gamma Spectrometry measurement. The mean activity concentration of ¹³⁷Cs ranged between 3.40 and 5.89 Bq/m³. Higher activity concentrations were observed at the coastal and towards the south of Peninsular Malaysia and were aligned with the high turbidity. These may due to the rapid diffusion of ¹³⁷Cs from suspended particulates and fine sediments into surface seawater. The activity concentrations of ¹³⁷Cs observed in this study were slightly higher than the concentrations reported in seawater at the Straits of Malacca, Vietnam and Philippines. This might be because the study area received more input of ¹³⁷Cs that originated from global fallout and then deposited on land which later being transported subsequently into the coastal zone due to siltation and erosion processes. It could also be attributed to the intrusion of river waters containing higher concentrations of ¹³⁷Cs.     

ICP-MS analysis of plutonium activities and <Superscript>240</Superscript>Pu/<Superscript>239</Superscript>Pu ratio in alpha spectrometry planchet deposits

Plutonium isotopes were measured by alpha-spectrometry and ICP-MS in sediment samples from two European lakes: Blelham Tarn in U.K. and Stechlin lake in Germany. The ICP-MS measurements were made after alpha-spectrometry counting of the planchets. The planchets were prepared by traditional electrodeposition method after radiochemical extraction, separation and purification of the Pu fraction. A short radiochemical separation using plutonium selective resin, between the two spectrometry measures, is presented. The results show that these two complementary methods are in good agreement, the plutonium activity concentrations are the same. Alpha-spectrometry allows the ²³⁸Pu determination and ICP-MS individual measurement of ²³⁹Pu and ²⁴⁰Pu. ²³⁸Pu/^239+240Pu and ²⁴⁰Pu/²³⁹Pu ratios are calculated to determine the plutonium contamination source. With the results of these two techniques, it could be demonstrate that the plutonium is of global fallout origin.     

Determination of the <Superscript>240</Superscript>Pu/<Superscript>239</Superscript>Pu atom ratio in global fallout at two locations in the Northern Hemisphere

Summary Extensive soil and sediment sampling was conducted along the Colorado Front Range and the plains east of the Front Range at locations believed to only be exposed to global fallout. The average ²⁴⁰Pu/²³⁹Pu atom ratio in the samples collected in Colorado was determined to be 0.165±0.008. A limited number of samples were collected at various locations in the Arctic at approximately 70° N latitude. Analyses of these samples predict that the ²⁴⁰Pu/²³⁹Pu atom ratio in environmental samples collected at 70° N latitude at locations only containing fallout is 0.183±0.009. These results provide data that help to precisely define the ²⁴⁰Pu/²³⁹Pu atom ratios representative of global fallout at the two locations studied.     

Determination of <Superscript>241</Superscript>Am/<Superscript>243</Superscript>Am ratios

Determination of ²⁴¹Am/²⁴³Am ratios is required for vanous purposes including assay of Am by isotope dilution techniques. Alpha-spectrometry on electrodeposited sources is a preferred technique for this determination. However, there is an inherent problem of tail contribution which necessitates the use of suitable algorithms to account for the same. Recently, in the frame of a Coordinated Research Program (CRP) of the International Atomic Energy Agency (IAEA), WinALPHA software has been developed which is a combination of an asymmetrical Gaussian for the main part of the peak and a low energy function. Therefore, it was of interest to compare the use of this algorithm with the routinely used method, in our laboratory, based on geometric progression (G. P.) decrease. Since, there are no reference materials available commercially for ²⁴¹Am/²⁴³Am ratios, synthetic mixtures covening a wide range (0.3 to 2.0) of ²⁴¹Am/²⁴³Am α-activity ratios were used and un-ignited electrodeposited sources were prepared for α-spectrometry. The α-spectra obtained using PIPS detector, were evaluated using the two algonthms The ²⁴¹Am/²⁴³Am α-activity ratios obtained were also compared with those determined by thermal ionization mass spectrometry (TIMS). An agreement of about 1% was obtained in the ²⁴¹Am/²⁴³Am ratios determined by the two methods and also by using the two algorithms for α-spectrum evaluation.     

Plutonium concentration and <Superscript>240</Superscript>Pu/<Superscript>239</Superscript>Pu isotopic ratio in the surface soils from the Jiuquan region in northwestern China

Surface soil samples collected in the Jiuquan region in the downwind area of the Chinese nuclear test site (CNTs) were analyzed for Pu isotopes. The ^239+240Pu activities ranged from 0.025 ± 0.009 to 0.89 ± 0.16 mBq g^?1, varying significantly with different sampling sites. The Dunhuang city that is located in the southwestern part of the Jiuquan region received the heaviest Pu deposition (^239+240Pu activities, 0.23–0.89 mBq g^?1). Most of the ²⁴⁰Pu/²³⁹Pu isotopic ratios were similar with that of the global fallout. However, the low values (0.080–0.147) observed in three sampling sites further supported the finding of Pu originated from CNTs in that region.     

<Superscript>239, 240, 241</Superscript>Pu fingerprinting of plutonium in western US soils using ICPMS: solution and laser ablation measurements

Sector field inductively coupled plasma mass spectrometry (SF-ICPMS) has been used with analysis of solution samples and laser ablation (LA) of electrodeposited alpha sources to characterize plutonium activities and atom ratios prevalent in the western USA. A large set of surface soils and attic dusts were previously collected from many locations in the states of Nevada, Utah, Arizona, and Colorado; specific samples were analyzed herein to characterize the relative contributions of stratospheric fallout vs. Nevada Test Site (NTS) plutonium. This study illustrates two different ICPMS-based analytical strategies that are successful in fingerprinting Pu in environmental soils and dusts. Two specific datasets have been generated: (1) soils are leached with HNO₃-HCl, converted into electrodeposited alpha sources, counted by alpha spectrometry, then re-analyzed using laser ablation SF-ICPMS; (2) samples are completely dissolved by treatment with HNO₃-HF-H₃BO₃, Pu fractions are prepared by extraction chromatography, and analyzed by SF-ICPMS. Optimal laser ablation and ICPMS conditions were determined for the re-analysis of archived alpha spectrometry “planchette” sources. The best ablation results were obtained using a large spot size (200 μm), a defocused beam, full repetition rate (20 Hz) and scan rate (200 μm s⁻¹); LA-ICPMS data were collected with a rapid electrostatic sector scanning experiment. Less than 10% of the electroplated surface area is consumed in the LA-ICPMS analysis, which would allow for multiple re-analyses. Excellent agreement was found between ^239+240Pu activities determined by LA-ICPMS vs. activity results obtained by alpha spectrometry for the same samples ten years earlier. LA-ICPMS atom ratios for ²⁴⁰Pu/²³⁹Pu and ²⁴¹Pu/²³⁹Pu range from 0.038–0.132 and 0.00034–0.00168, respectively, and plot along a two-component mixing line (²⁴¹Pu/²³⁹Pu = 0.013 [²⁴⁰Pu/²³⁹Pu] – 0.0001; r ² = 0.971) with NTS and global fallout end-members. A rapid total dissolution procedure, followed by extraction chromatography and SF-ICPMS solution Pu analysis, generates excellent agreement with certified ^239+240Pu activities for standard reference materials NIST 4350b, NIST 4353, NIST 4357, and IAEA 385. ^239+240Pu activities and atom ratios determined by total dissolution reveal isotopic information in agreement with the LA-ICPMS dataset regarding the ubiquitous mixing of NTS and stratospheric fallout Pu sources in the regional environment. For several specific samples, the total dissolution method reveals that Pu is incompletely recovered by simpler HNO₃-HCl leaching procedures, since some of the Pu originating from the NTS is contained in refractory siliceous particles.     

<Superscript>241</Superscript>Pu in the environment: insight into the understudied isotope of plutonium

Studies of plutonium in the environment have focused on the α-emitting isotopes ²³⁸Pu, ²³⁹Pu and ²⁴⁰Pu, often overlooking the β-emitting isotope ²⁴¹Pu  because of its relatively short half-life (14.4 years). Here, we summarize sources of  ²⁴¹Pu and discuss its distribution and behavior in the environment. In the short term, ²⁴¹Pu, the largest contributor to the total plutonium radioactivity whereas in the long term its decay products, ²⁴¹Am and ²³⁷Np, are the major contributors as some 46% of current total ²⁴¹Am is attributable to ²⁴¹Pu decay. In this context, understanding the fate and transport of ²⁴¹Pu is crucial to assessing long-term radiological dose.     

90Sr and239+240Pu238Pu241Am in some samples of mushrooms and forest soil from Poland

Strontium-90, plutonium and americium activity concentrations in a few samples of forest soils, some species of mushrooms and fern leaves have been determined. These results are compared with cesium activity concentrations in the same materials obtained in a previous work. Radiochemical procedures are described. The origin of the contamination (Chernobyl accident or nuclear test explosion release) is discussed. The⁹⁰Sr activity concentration ranges from 0.6 Bq/kg (mushroom samples) to 48.4 Bq/kg (fern leaves). For^239+240Pu, it ranges from not detected above background (mushrooms, fern) to 10.8 Bq/kg (humus layer of forest soil). The maximum concentration of²⁴¹Am is found to be 2.4 Bq/kg (humus sample) and for²³⁸Pu it is 0.85 Bq/kg (also in the humus sample).     

Determination of activity ratios of <Superscript>238,239+240,241</Superscript>Pu, <Superscript>241</Superscript>Am, <Superscript>134,137</Superscript>Cs,and <Superscript>90</Superscript>Sr in Bulgarian soils

The origins of different artificial radionuclides found in soils from Northern and Southern Bulgaria was determined by measurements of their actual concentrations and respective ratios. On the basis of the measured mobility and concentrations of the investigated radionuclides in soils, it was estimated that after the Chernobyl accident the mean depositions of fresh ¹³⁷Cs were 3.0 ± 2.5 kBq/m² for Northern Bulgaria and 15 ± 7 kBq/m² for Southern Bulgaria. As a result of global fallout following atmospheric nuclear weapon tests in the 1950s, mean depositions (corrected to 1965) were calculated for Northern and Southern Bulgaria as follows: for ⁹⁰Sr—1.0 ± 0.5 and 2.3 ± 1.3 kBq/m², ²³⁸Pu—1.3 ± 0.8 and 2.8 ± 1.6 Bq/m², ^239+240Pu—15 ± 14 and 47 ± 38 Bq/m², and ²⁴¹Pu—520 ± 200 and 760 ± 260 Bq/m².     

90Sr, 137Cs, 238Pu, 239+240Pu and 241Am levels in terrestrial and marine ecosystems around the Italian base in Antarctica

During the last 14 years the Radioecology Laboratory of Parma University and the General Chemistry Institute of Urbino University collaborated on a radioecological programme having the aim to observe the evolution of antropogenic radioactivity in Antarctica in the period 1987-2001. The artificial radionuclides considered were ⁹⁰Sr, ¹³⁷Cs, ^239+240Pu,²³⁸Pu and ²⁴¹Am. The contamination seems to be higher in the continental environment rather than in the marine one. Mosses, algae and lichens showed the highest values for all radionuclides analyzed. The results prove that the Antarctic continent is interested by radioactive pollution. As far as ¹³⁷Cs is concerned, a progressive decrease was observed.     

Radioactivity of plutonium isotopes, <Superscript>137</Superscript>Cs and their ratio in sediment,seawater and biota from the east coast of Peninsular Malaysia

This study with sampling expeditions of marine sediment, seawater and biota were performed at 30 stations within Malaysian Exclusive Economic Zone (EEZ). A total of >400 samples were collected to determine the activity concentration of anthropogenic radionuclides (^239+240Pu, ¹³⁷Cs) and their activity ratio (^239+240Pu/¹³⁷Cs) in sediments, seawater and biota. The purpose of this study was to determine the concentration levels for these radionuclides and to evaluate any occurrence of radioactive contamination. Sediment cores were obtained using multicorer device, while water samples via co-precipitation techniques and biota was purchased from local fishermen. The activity concentrations of ^239+240Pu in sediment, seawater and biota were ranged 0.21–0.45 Bq/kg dry wt., 2.33–7.95 mBq/m³ and <0.008 Bq/kg fresh wt., respectively. Meanwhile, the values of ¹³⁷Cs were ranged <1.00–2.71 Bq/kg dry wt. in sediment, 3.40–5.89 Bq/m³ in seawater and <0.05–0.41 Bq/kg fresh wt. in biota, respectively. Activity ratios of ^239+240Pu to ¹³⁷Cs obtained seem to confirm that these artificial radioactivities were mainly due to global nuclear fallout.     

Extraction chromatography for the separation of <Superscript>239</Superscript>Np from <Superscript>243</Superscript>Am

Summary An extraction chromatography method was developed for the separation of 239Np from ²⁴³Am in nitric acid solution. A sorbent based on aliphatic quaternary amine Aliquat-336 and hydrophobized silica gel was prepared. ²³⁹Np reduced to the oxidation state(IV) with ferrous sulfamate in 2M or 6M HNO₃ sorbs on the prepared silica gel column. After washing with 0.1M ferrous sulfamate in 2.5M HNO₃, ²³⁹Np is eluted with 0.1M HNO₃ containing 0.02M HF. The separation of ²⁴³Am from ²³⁹Np is very effective. The purity of ²³⁹Np was found to be better than 99.5%. The proposed ²³⁹Np milking procedure is suitable for the preparation of ²³⁹Np tracer that can be used for the determination of ²³⁷Np radiochemical yield.     

An ion chromatographic separation method for the sequential determination of <Superscript>90</Superscript>Sr, <Superscript>241</Superscript>Am and Pu isotopes in a urine sample

A radiobioassay method has been developed for the sequential determination of ⁹⁰Sr, ²⁴¹Am and Pu isotopes in a urine sample. Unlike the existing methods using multiple extraction chromatographic cartridges, this work demonstrates an application of an automated ion chromatographic (IC) system for the separation of these radionuclides on a single IC column. The method meets the bioassay performance criteria for relative bias and relative precision as recommended by ANSI/HPS N13.30-2011. The detection limits for the radionuclides are found to be satisfactory for medical intervention in case of an accidental exposure scenario. Sample preparation time is less than 11 h.