裂解气相色谱-质谱法研究聚醚酰亚胺的热裂解行为

采用裂解气相色谱-质谱技术研究了聚醚酰亚胺(PEI)在550℃、650℃和750℃裂解温度下的热分解行为.随着裂解温度上升,裂解产物明显增加.在750℃时聚合物分子链断裂完全,共鉴别到25种碎片组分.PEI热分解的碎片中叔丁基苯酚、叔丁基甲基苯酚、苯酚、苯胺、氰苯、2-苯基-1H-异吲哚-1,3(2H)-二酮等5种裂解产物最重要,因此可以依据这几种化合物定性鉴别聚醚酰亚胺.依据热分解产物的数量以及结构推断降解机理为:裂解首先从醚键开始,其次是酰胺基团中的C-N键,然后再经过一系列消除反应、成环反应、重排反应等形成多种裂解碎片.     

在线裂解气相色谱/质谱联用法研究4-氧代-β-大马酮的热裂解行为

用在线裂解气相色谱/质谱法(PyGC/MS)研究了4-氧代-β-大马酮的热裂解行为。在氦气氛围中,将4-氧代-β-大马酮分别在350,450,550,650,700和750 ℃下进行热裂解,并以GC/MS对其裂解产物进行定性和半定量分析。结果表明,不同的裂解温度直接影响生成产物的类型和相对含量。4-氧代-β-大马酮可裂解出β-大马酮、4-氧代-β-紫罗兰酮、3,4,4-三甲基-环己-2-烯-1-酮和2,5,5-三甲基-环己-3-烯-1-酮等54种裂解产物。在550 ℃以下时,只有少量4-氧代-β-大马酮发生裂解; 在750 ℃时,几乎完全裂解,转移率达99.74%, 裂解产物达45种之多。随着裂解温度的升高,裂解产物越来越复杂,并出现有害物质如苯、甲苯、蒽和菲等。根据4-氧代-β-大马酮裂解产物相对含量的变化规律,对其裂解产物的形成机理进行了探讨,认为4-氧代-β-大马酮可能按照4种途径发生裂解。     

Py-GC/MS分析烟用添加剂黄芩浸膏的热裂解产物

采用在线热裂解气相色谱-质谱法(Py-GC/MS)法研究了黄芩浸膏热裂解行为。在氦气氛围中,将黄芩浸膏分别在300、450、600、750和900℃下进行热裂解,并以GC/MS对其裂解产物进行定性和半定量分析,并用黄芩浸膏进行了卷烟加香试验。结果表明:①黄芩浸膏在这一系列裂解温度下检测到的挥发性热裂解产物分别为12种、19种、40种、55种和46种;②黄芩浸膏低温区(300℃～450℃)裂解后产生大量醛类、酮类、酯类和呋喃类物质,这些物质是构成卷烟香味的重要物质,能改善卷烟吸味、减轻刺激性;③在高温区(750℃～900℃)产生大量的芳香族化合物,如苯、甲苯、乙苯、萘等。该研究为香味物质在卷烟燃烧过程中的挥发性物质提供了例证。     

热裂解气相色谱-质谱法对聚四氟乙烯涂层的热裂解产物分析

提出了热裂解气相色谱-质谱法(Py-GC-MS)研究聚四氟乙烯涂层的热裂解性质。采用管炉型热裂解装置和不锈钢毛细管柱,根据样品的复杂程度进行分阶段释放气体分析,得到聚四氟乙烯涂层不同热裂解阶段的释放气体色谱图。结果表明:聚四氟乙烯涂层在100～300℃热裂解温度下检测到的热裂解产物为1,4-二甲基-2,5-二乙基苯、异丙氧基苯胺、双酚A;在300～380℃热裂解温度下检测到的热裂解产物为苯乙烯、α-甲基苯乙烯、4,4′-二甲基苯胺;在380～460℃热裂解温度下检测到的热裂解产物为苯酚、苯胺、对氨基甲苯、二苯醚;在460～600℃热裂解温度下检测到的热裂解产物为四氟乙烯单体。     

麻浆卷烟纸热裂解产物的气相色谱/质谱分析

采用热失重(TG)和裂解气相色谱/质谱法(PyGC/MS)研究了麻浆卷烟纸的热裂解行为.在He气气氛围中,将麻浆卷烟纸分别在400、500、600、700、800和900℃下进行热裂解,并以GC/MS对其裂解产物进行定性和半定量分析.结果表明,不同的裂解温度直接影响生成产物的类型和相对含量.麻浆卷烟纸可裂解出1-甲基-1,3-环戊二烯、2-甲基呋喃、2,3-二氢香豆酮、苯和甲苯等156种产物.低温下,裂解产物主要为烯类、呋喃类和酮类化合物;随着裂解温度的增加,烯、酮类的含量下降,苯及其衍生物和稠环芳烃的含量逐渐增加.可通过降低卷烟燃烧温度来降低卷烟纸裂解产生的有害成分含量.如果单纯考虑麻浆卷烟纸的影响,卷烟的最佳燃烧温度应控制在500℃左右.     

裂解气相色谱-质谱法对黄芩浸膏热裂解产物分析

采用热失重分析法(TGA)和在线热裂解气相色谱-质谱法(Py-GC-MS)研究了黄芩浸膏热裂解性质。在氦气氛围中,将黄芩浸膏分别在300,450,600,750,900℃下进行热裂解,并以气相色谱-质谱法对其裂解产物进行定性和半定量分析,并用黄芩浸膏进行了卷烟加香试验。结果表明:①在热失重曲线图中不能较明显地看出黄芩浸膏的较大失重点;②黄芩浸膏在上述温度下检测到的主要挥发性热裂解产物分别为12,18,28,42,40种;③600℃以下,黄芩浸膏热裂解产物主要是醛类、酮类、酯类和呋喃类物质;有害物质的量随着温度的升高而提高;900℃时,则主要为苯、甲苯、萘等有害成分;④黄芩浸膏具有提高卷烟香气质量、改善余味、柔和烟气的作用。     

不同氛围下烟草的热裂解行为研究

烟丝分别在He和空气环境中于600、700、800、900、1 000 ℃下进行热裂解,裂解产物用GC-MS进行在线检测,研究了烟丝样品分别在惰性和有氧氛围中不同温度下的热裂解行为.数据表明,烟丝在He气和空气中热裂解时的产物有较大差异,He气下的裂解产物以烯烃、苯和苯系物为主;在空气下裂解的主要产物为酮、醛、醇、酸和酯等羰基化合物.有氧氛围有益于异戊二烯和1,3-丁二烯的生成,但在一定程度上抑制了酚类物质的产生.在惰性和有氧氛围下,随着温度的升高,多环芳烃化合物的产生量均进一步增加.He氛围下得到的裂解产物类型接近卷烟燃烧时的热解区,而空气氛围下得到的裂解产物类型接近燃烧区.     

裂解气相色谱-质谱法研究壬酸香草酰胺的热裂解

采用在线热裂解/气相色谱-质谱联用技术(Py/GC-MS)对壬酸香草酰胺(PAVA)的热裂解行为进行了研究,在氦气氛围中考察了不同裂解温度和裂解时间对PAVA裂解的影响,通过GC-MS对裂解产物进行定性和半定量分析。结果表明,随着裂解温度的升高,PAVA裂解率快速提高,裂解产物也进一步增多,当裂解温度达到700℃以上时,可裂解出壬酰胺、2-甲氧基-4-甲基苯酚、1-己烯、壬基腈、壬醛等14种产物。同一温度下随着裂解时间的延长,PAVA的裂解率逐步升高,裂解产物发生了进一步的裂解。根据热裂解产物及主要裂解产物的含量变化,初步推断了PAVA的裂解规律。     

熔融盐中甲苯的裂解实验研究

固定床内研究了甲苯裂解特性,考察了熔融盐种类、裂解条件对甲苯裂解率、气体产物及苯产率的影响。结果表明,熔融盐对甲苯裂解有明显的催化作用,添加熔融盐时,相同裂解温度下甲苯裂解率明显提高。在71%Na₂CO₃+29%K₂CO₃（NK）盐和8.3%Na₂CO₃+91.7%NaOH（NN）盐中800℃催化裂解时,与热裂解相比,甲苯裂解率分别提高27%和46%,苯产率明显减少。NN盐催化裂解时,750℃后产物中的氢气主要来源于裂解碳与NN盐的反应。     

TG-MS与Py-GC相结合法研究惰性气氛下含硫模型化合物热解过程中硫的脱除及释放行为研究（英文）

采用热重-质谱法(TG-MS)和热解-气相色谱法(Py-MS)相结合的方法对模型化合物(十四硫醇、二丁基硫醚、苯硫醚、二甲基噻吩、苯并噻吩和二苯并噻吩等)在惰性气氛下硫的脱除及释放行为进行研究。惰性气氛下硫的脱除顺序为:十四硫醇二丁基硫醚二甲基噻吩苯并噻吩苯硫醚二苯并噻吩,苯硫醚除外,该顺序与含硫官能团的热分解顺序一致。在热解过程中,所有模型化合物在质谱和气相色谱仪上均被检测到SO2;除苯硫醚和二苯并噻吩外,其他模型化合物中均检测到了COS;而只在十四硫醇、二丁基硫醚和二甲基噻吩中检测到了H2S。且热解气中SO2含量要显著高于H2S和COS。这是由于活性炭作载体时,惰性气氛下内部氢的含量显著小于内部氧的含量,所以大多数的含硫自由基易与内部氧结合以SO2的形式逸出。对于苯硫醚、苯并噻吩和二苯并噻吩中没有检测到H2S,是由于内部氢的不足,使得含硫自由基不能与内部氢结合,所以没有检测到H2S逸出。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.