Photo-induced formation of silver nanoparticles and polymerization of acrylamide derivatives

The effect of silver ions and silver nanoparticles on the rate of polymerization of acrylamide and N-isopropylacylamide was investigated. Composites of silver particles of diameter around 30 nm and polyacrylamide were prepared by the photochemical method in the absence of any photosensitizer. The particles formed were characterized by UV–visible spectrophotometry, XRD, and TEM. It was shown that the presence of metal ions such as Ag⁺, Co²⁺, and Ni²⁺ in the acrylamide monomer is essential for photoinduced polymerization.     

Effect of plant-based phenol derivatives on the formation of Cu and Ag nanoparticles

The complexes formed on the reaction of various metal ions viz., Cu(II) and Cu(I) with phenol derivatives viz. catechol, chlorogenic acid (CGA), hydroquinone and n-propyl gallate (nPG) were established by UV-visible spectroscopy. The metal/ligand complexing ratio and complexation constants have been determined. Further, we showed that nanoparticles of Cu can be prepared from metal-phenol complexes in the presence of a protein (gelatin) by γ-irradiation showing that the reduction is metal ion centered. Formation of Ag nanoparticles was also observed on photo-irradiation with xenon lamp in the presence of dihydroxy benzene. The Ag and Cu nanoparticles were characterized by transmission electron microscopy (TEM) and UV-visible absorption spectroscopy. TEM technique showed the presence of Cu and Ag nanoparticles with average size of 20 and 30 nm, respectively.     

Kinetics of the formation of silver dimers: early stages in the formation of silver nanoparticles

Silver clusters too small to support a plasmon band possess interesting fluorescence properties as well as being a convenient route to studying the early stages of nanoparticle formation. Fluorescent silver clusters are synthesized in toluene solution, and the formation is monitored herein by laser flash photolysis (LFP). Kinetic analysis of the formation of the Ag clusters is consistent with the formation of the smallest possible clusters, silver dimers (Ag(2)), whereby a mechanism for the formation of these clusters is provided as well as the first reported extinction coefficient and association constant for Ag(0) to form Ag(2). The formation of Ag(2) clusters is contrasted with the formation of Ag nanoparticles in aqueous media, and the particular stability and selectivity toward Ag(2) in this system is also studied using LFP.     

Spontaneous formation of silver nanoparticles in aminosilica

We report a rapid and spontaneous metallization process associated with sol–gel reaction of aminosilane that can be utilized to synthesise silver embedded silica nanocomposite without involving additional reducing agents. The reduction reaction induced by bis[3-(trimethoxysilyl)propyl]ethylenediamine (enTMOS) involves amine functional moieties, which drive the reduction reaction with presence of water. Cyclic voltammetry was used to investigate the redox potential of enTMOS and its relation to chemical environment. It was found that the oxidation potential of enTMOS depending on the amount of water (water:enTMOS (v/v) = 8:1–0:1) ranges from 0.48 to 0.68 V versus Ag/AgCl electrode in methanol. The oxidation potential of aminosilane decreases with water content and becomes more negative than that of Ag, suggesting the aminosilane acts as a silver reducing agent while serving as a matrix to encapsulate silver nanoparticles after reacting with water. This process has been utilized to produce evenly dispersed silver nanoparticles with sizes ranging from 5 to 20 nm in both liquid and solid forms of aminosilane, allowing us to prepare silver nanoparticles doped silica nanocomposite that exhibits enhanced electrochemical properties.     

Photochemical formation of silver nanoparticles in elastomer films

Photochemical deposition of silver nanoparticles in poly(butyl acrylate) and poly(butadiene-styrene) under the action of monochromatic UV light (254 nm) was studied. Changes in the polymer structure in the course of photolysis were revealed and analyzed. A mechanism of formation of silver nanoparticles was suggested. Electron microscopic examination showed that the efficiency of the particle formation is determined by the residual moisture content of the polymer films. Physicomechanical properties (tensile strength and relative elongation) of the elastomer films containing silver nanoparticles were studied.     

Role of stabilizing agents in the formation of stable silver nanoparticles in aqueous solution: Characterization and stability study

The stability of silver nanoparticles is controlled mainly by two major factors, namely, aggregation and oxidation. In the present study, silver nanoparticles were synthesized by using different series of reducing agents like a strong reducing agent (sodium borohydride), a mild reducing agent (tri-sodium citrate), and a weak reducing agent (glucose) with different capping agents, namely, polyvinyl pyrrolidone (PVP K 30), starch, and sodium carboxyl methyl cellulose (NaCMC). The synthesized silver nanoparticles were characterized by UV-Visible absorption spectroscopy, dynamic light scattering (DLS), atomic force microscopy (AFM), and anti-microbial activity. The particle size of silver nanoparticles varies in the following order: sodium borohydride < tri-sodium citrate < glucose. Combination of sodium borohydride–polyvinyl pyrrolidone and tri-sodium citrate-polyvinyl pyrrolidone yields stable silver nanoparticles compared to other combinations of reducing agents and capping agents. The stability results confirmed that a refrigerated condition (8°C) was more suitable for storage of silver nanoparticles. Anti-microbial activity of silver nanoparticles synthesized in a sodium borohydride–polyvinyl pyrrolidone mixture shows a larger zone of inhibition compared to other silver nanoparticles. Anti-microbial results confirmed that the anti-microbial activity is better with smaller particle size. The size and stability of silver nanoparticles in the presence of different combinations of stabilizing and capping agents are reported.     

Role of the Na+ ion on phenol derivatives/hydroxypropyl-beta-cyclodextrin complex formation on porous graphitic carbon phase

The reversed-phase liquid chromatography retention of phenol derivatives was investigated over a concentration range of sodium chloride (0-10(-2) M) and hydroxypropyl-beta-cyclodextrin (HP-beta-CD) (0-35x10(-3) M) using a porous graphitic carbon (PGC) stationary phase and a methanol/water mixture (50:50 (v/v)) as the mobile phase. A theoretical treatment was developed to investigate the effect of the sodium chloride and hydroxypropyl-beta-cyclodextrin on the equilibrium between the solutes with the PGC surface and the aqueous medium, respectively. The thermodynamic parameter variations were calculated using van't Hoff plots. It was expected that the sodium ion acted on the solute-PGC association process by modifying the surface tension of both the bulk solvent and the PGC surface. The phenol derivative/HP-beta-cyclodextrin complexation was shown to be entropically controlled for all the solutes except for the one which contained the -NO2 group in its structure, i.e. the nitro phenol derivative. A comparison of the compensation temperature of the solute-PGC association process when sodium chloride and HP-beta-CD concentration changed in the mobile phase led to the conclusion that these two modifiers acted via a variation in the hydrophobic effect.     

Photo- and temperature-dependent formation of tryptophan/silver nanoparticles

Research on Chemical Intermediates - Amino acid tryptophan is an advantageous reagent for preparation of biocompatible noble metal nanoparticles as promising anticancer agents. The reduction of...     

Formation of catalytic silver nanoparticles supported on branched polyethyleneimine derivatives

A new and straightforward method for screening highly catalytically active silver nanoparticle-polymer composites derived from branched polyethyleneimine (PEI) is reported. The one-step systematic derivatization of the PEI scaffold with alkyl (butyl or octyl) and ethanolic groups led to a structural diversity correlated to the stabilization of silver nanoparticles and catalysis. Analysis of PEI derivative libraries identified a silver nanoparticle-polymer composite that was able to efficiently catalyze the p-nitrophenol reduction by NaBH(4) in water with a rate constant normalized to the surface area of the nanoparticles per unit volume (k(1)) of 0.57 s(-1) m(-2) L. Carried out in the presence of excess NaBH(4), the catalytic reaction was observed to follow pseudo-first-order kinetics and the apparent rate constant was linearly dependent on the total surface area of the silver nanoparticles (Ag-NPs), indicating that catalysis takes place on the surface of the nanoparticles. All reaction kinetics presented induction periods, which were dependent on the concentration of substrates, the total surface of the nanoparticles, and the polymer composition. All data indicated that this induction time is related to the resistance to substrate diffusion through the polymer support. Hydrophobic effects are also assumed to play an important role in the catalysis, through an increase in the local substrate concentration.     

Role of base in the formation of silver nanoparticles synthesized using sodium acrylate as a dual reducing and encapsulating agent

The formation mechanism of Ag nanoparticles (NPs) synthesized with a wet-chemical reduction method using sodium acrylate as a dual reducing and capping agent was investigated with various analytical techniques. The time course of the state of the reaction solution was investigated using UV-vis and XAFS spectroscopies which showed that the NP formation rate increased with increasing concentration of sodium hydroxide (NaOH). The detailed kinetic analyses reveal that both the reduction rate of Ag ions and the nucleation rate of Ag NPs are dramatically increased with increasing NaOH concentration. XANES analyses imply that another reaction pathway via alternative Ag(+) species, such as Ag(OH)(x), was developed in the presence of NaOH. Consequently, NaOH is found to play an important role not only in creating specific intermediates in the reduction of Ag(+) to Ag(0), but also in accelerating the reduction and nucleation rates by enhancing the oxidation of sodium acrylate, thereby increasing the rate of formation of the Ag NPs.     

Features of the formation of silver nanoparticles on the silicon nitride surface

Special features of the formation of particles of a silver-containing catalyst phase on a silicon nitride surface in relation to the mode of the active component deposition were studied. The influence of a redox medium of the catalytic reaction of the ethylene glycol selective oxidation to glyoxal on the final composition and structure of silver catalysts was studied.     

Effect of the polymer matrix on the formation of silver nanoparticles in polymer–silver salt complex membranes

When polymer–silver salt complex membranes were exposed to UV irradiation, the separation performances of both the permeance and selectivity for propylene–propane decreased, which was primarily attributed to the reduction of the silver ions in the membranes to silver nanoparticles. Here, the effect of the polymer matrix on the formation of silver nanoparticles in the polymer–silver salt complex membranes was investigated. This effect was assessed for the complexes of two kinds of silver salts (AgBF₄ and AgCF₃SO₃) with several polymeric ligands containing three different carbonyl groups, including poly(vinyl pyrrolidone) (PVP) with an amide group, poly(vinyl methyl ketone) (PVMK) with a ketone group, and poly(methyl methacrylate) (PMMA) with an ester group. UV–vis spectra and transmission electron microscopy (TEM) images clearly indicated that the reduction rate of the silver ions has the following order in the various polymer matrices: PVP > PVMK > PMMA, whereas the size and the distribution of the nanoparticles exhibited the reverse order. The tendency to form silver nanoparticles was explained in terms of the differences between the comparative strengths of the interactions of the silver ions with the different carbonyl oxygens in the matrices, as well as that of the silver ions with counteranions, which was characterized by X‐ray photoelectron spectroscopy (XPS) and FT‐Raman spectroscopy. It was concluded that when the concentration of free silver ions was low due to weak polymer–silver ion and strong silver ion–anion interactions, as found with PMMA, the reduction rate of silver ions to silver nanoparticles was slow. Therefore, the PMMA–silver complex membranes were less sensitive to decreases in separation performance upon UV irradiation than compared to the PVP membranes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1168–1178, 2006     

In situ formation of silver nanoparticles in PMMA via reduction of silver ions by butylated hydroxytoluene

Silver nanoparticles (Ag NPs) were efficiently generated by in situ reduction of silver ions via butylated hydroxytoluene (BHT), in poly(methyl methacrylate). The characterization of Ag/PMMA by TEM, SEM, XRD, and FTIR indicated that Ag NPs with a face center cubic (fcc) crystal structure and a mean diameter of about 30 nm were dispersed in PMMA matrix with a relatively uniform distribution. In addition, the results of UV–Vis spectroscopy indicated that optical properties of the nanocomposite appeared mainly dependent on the reaction time and temperature. Increasing the reaction time and temperature make higher yield of Ag NPs. A provisional reduction mechanism was also proposed for the formation of the Ag NPs.     

Size quantized formation and self-assembly of gold encased silver nanoparticles

Mixing aqueous dispersions of thiocyanate ion coated small (< 3.5 nm diameter) gold nanoparticles and EDTA covered larger (> 22 nm diameter) silver nanoparticles, results in the formation of robust gold encased silver nanoparticles; in contrast to using larger (> 11 nm diameter) gold nanoparticles which forms chained structures.     

Regularities of the formation of silver nanoparticles with oligostyrylmonocarboxylate ligands in ED-20 oligomer

Regularities of the formation of silver nanoparticles according to the reduction reaction of silver oligostyrylmonocarboxylate with ED-20 resin in the absence of hardening agent were studied at 60–75°C by UV/Vis spectroscopy and IR spectroscopy, transmission electron microscopy, and viscosimetry. Spherical silver nanoparticles with oligostyrylcarboxylate ligands characterized by diameter equal to 1.8 ± 0.2 nm and tendency toward ordered disposition in space were obtained. The process of formation of nanoparticles includes consecutive formation of diphilic complexes of silver carboxylate with epoxy resin, Ag⁺ → Ag⁰ reduction, and formation of (Ag⁰) _n nuclei at the ends of the diexpoxy component and/or along the oligomer chain. The activation energy values of formation of nanoparticles during the “inductive period” and at the stage of accumulation as well as the activation energy of viscous flow of ED-20 were measured. The threshold temperature of formation of narrow-size silver nanoparticles in epoxy oligomer ED-20 equals 75°C.     

Thermostimulated formation of silver and gold nanoparticles in porous silicon dioxide matrices

Manifestations of thermostimulated formation and subsequent transformation of silver and gold nanoparticles in porous opal and Vycor glass matrices are studied using optical spectroscopy. Two temperature ranges for silver nanoparticles are revealed, where first-type particles transform into another type of particles. With gold nanoparticles in these matrices, a temperature range in which one type of particles transforms into another type is established. An effect of complete blackening of Vycor glass samples, caused by their annealing, is revealed, and a rationalization of this effect is given.     

Thermochemical study of silver halide nanoparticles formation conditions in AOT inverted micelles

AgCl and AgBr nanoparticles formation conditions were studied by a thermochemical method in AOT (sodium bis(2-ethylhexyl)sulfosuccinate) inverted micellar systems, in AOT—dioctyl sulfide (DOS) mixed micelles, and (for comparison) in aqueous solutions. The heats of formation of AgCl and AgBr nanoparticles in AOT micelles in exchange reactions with potassium halides are, respectively, −55.5 × (1 ± 0.07) and −68.6 × (1 ± 0.07) kJ/mol, that is, smaller in magnitude than the values obtained for aqueous solutions (−68 × (1 ± 0.07) and −88 × (1 ± 0.07) kJ/mol). This difference arises from the existence of particle interactions causing the formation of coagulation contacts between halide particles followed by precipitation in an aqueous phase and the absence of such interactions in a micellar medium. DOS interacts with AOT (to form mixed micelles) and with silver ions (in long-term contact), thus reducing the heats of reactions.