Palladium-phosphinous acid-catalyzed cross-coupling of aliphatic and aromatic acyl chlorides with boronic acids

The cross-coupling of aromatic and aliphatic acyl chlorides with arylboronic acids in the presence of 2.5 mol % of (t-Bu₂POH)₂PdCl₂ (POPd) provides rapid access to ketones that are obtained in up to 93% yield. This palladium-phosphinous acid-catalyzed reaction is completed within 10 min when microwave irradiation is used, and it overcomes typical drawbacks of Friedel-Crafts acylation procedures such as harsh reaction conditions, untunable regiocontrol, and low substrate scope.     

Palladium-phosphinous acid-catalyzed NaOH-promoted cross-coupling reactions of arylsiloxanes with aryl chlorides and bromides in water

A palladium-phosphinous acid-catalyzed and NaOH-promoted coupling method using arylsiloxanes and aryl halides in water has been developed. The POPd1-catalyzed reaction between aryl chlorides or bromides and arylsiloxanes is compatible with various functional groups and affords biaryls in up to 99% yield. This cross-coupling reaction does not require additives such as surfactants or organic cosolvents and proceeds under air, which greatly facilitates operation and catalyst handling.     

Iron-catalyzed cross-coupling of primary and secondary alkyl halides with aryl grignard reagents

An iron-catalyzed cross-coupling reaction of a primary or secondary alkyl halide with an aryl Grignard reagent proceeds under mild conditions to give the corresponding coupling product in quantitative yield.     

Manganese-catalyzed cross-coupling reaction between aryl Grignard reagents and alkenyl halides

Aryl Grignard reagents react stereospecifically with alkenyl halides in the presence of manganese chloride (10%) to afford good yields of cross-coupling products.     

Palladium-catalyzed cross-coupling reactions of in situ generated allylindium reagents with aryl halides

[reaction: see text] In situ generated allylindium reagents from the reaction of 1 equiv of indium with 1.5 equiv of allyl halides could be effective cross-coupling partners in palladium-catalyzed cross-coupling reactions to aryl halides. The best results were obtained with 2% Pd(2)dba(3)CHCl(3) and 16% Ph(3)P in the presence of 3 equiv of LiCl in DMF at 100 degrees C.     

Efficient synthesis of sterically crowded biaryls by palladium-phosphinous acid-catalyzed cross-coupling of aryl halides and aryl grignards

A series of sterically hindered biaryls have been obtained by palladium- and nickel-phosphinous acid-catalyzed Kumada-Corriu cross-coupling of ortho-substituted aryl halides and Grignard reagents. This method allows formation of di- and tri-ortho-substituted biaryls in 87-98% yield under mild reaction conditions even when electron-rich aryl chlorides are used. The reaction also proceeds with aryl iodides at -20 degrees C, and under these conditions, functional groups that are generally not compatible with Grignard reagents are tolerated.     

Nickel-catalyzed cross-coupling of aryl phosphates with grignard and organoaluminium reagents. Synthesis of alkyl-, alkenyl-, and arylbenzenes from phenols

Aryl phosphates derived from phenols were converted into alkyl-, alkenyl-, and aryl- benzenes in high yields by cross-coupling with various kinds of Grignard and organoaluminium reagents in the presence of nickel (II) catalysts.     

Nickel-catalyzed cross-coupling of potassium aryl- and heteroaryltrifluoroborates with unactivated alkyl halides

A method for the cross-coupling of alkyl electrophiles with various potassium aryl- and heteroaryltrifluoroborates has been developed. Nearly stoichiometric amounts of organoboron species could be employed to cross-couple a large variety of challenging heteroaryl nucleophiles. Several functional groups were tolerated on both the electrophilic and the nucleophilic partners. Chemoselective reactivity of C(sp(3))-Br bonds in the presence of C(sp(2))-Br bonds was achieved.     

Synthesis of nickel-salicylideneimines complexes and catalyzing cross-coupling reaction of aryl halides and Grignard reagents

A series of nickel-salicylideneimines complexes were prepared in wild way and these complexes were stable to air and moisture. The nickel-salicylideneimines complexes exhibited good activity in catalyzing Grignard reagents with aryl halids to biphenyl derivatives and the more fluorine atoms contained by N-substituted benzene moiety could function the better activity.     

Palladium-catalyzed cross-coupling reactions between dihydropyranylindium reagents and aryl halides. synthesis of C-aryl glycals

[reaction: see text] Palladium(0)-catalyzed cross-coupling reactions between tris(dihydropyranyl)indium 1 and aryl halides 2 have been investigated. Aryl iodides and electron-deficient aryl bromides couple efficiently with the in situ-generated indium reagents in the presence of 1-5 mol % Cl(2)Pd(PPh(3))(2) to produce substituted dihydropyrans 3 with minimal (<10%) dimer (4) formation. Organoindium reagents derived from D-glucal also undergo cross couplings with aryl iodides to produce C-aryl glycals.     

Cobalt-catalyzed cross-coupling reactions of alkyl halides with aryl Grignard reagents and their application to sequential radical cyclization/cross-coupling reactions

Reactions of alkyl halides with arylmagnesium bromides in the presence of cobalt(II)(diphosphine) complexes are discussed. Treatment of 1-bromooctane with phenylmagnesium bromide with the aid of a catalytic amount of CoCl₂(dppp) [DPPP=1,3-bis(diphenylphosphino)propane] yielded octylbenzene in good yield. The reaction mechanism would include single electron transfer from an electron-rich cobalt complex to alkyl halide to generate the corresponding alkyl radical. The mechanism was justified by CoCl₂(dppe)-catalyzed [DPPE=1,2-bis(diphenylphosphino)ethane] sequential radical cyclization/cross-coupling reactions of 6-halo-1-hexene derivatives that yielded benzyl-substituted cyclopentane skeletons.     

Palladium-catalysed cross-coupling of 2-trimethylsilylpyridine with aryl halides

Palladium-catalysed cross-coupling of 2-trimethylsilylpyridine with aryl halides in the presence of stoichiometric silver(I) oxide, and catalytic TBAF allows the rapid preparation of the corresponding pyridin-2-ylaryl compounds in moderate to good yields under mild thermal conditions.     

Photochemical reactions of acyl iodides with aryl halides

Photochemical reactions of acyl iodides RC(O)I (R = Me, Ph) with aryl halides, fluoro-, chloro-, and bromobenzenes, 1,4-dibromobenzene, 2- and 3-bromotoluenes, and 4-bromo-1,2-dimethylbenzene, were studied. Acetyl iodide reacted with chloro- and bromobenzenes and 1,4-dibromobenzene according to the exchange pattern to give iodobenzene and 1,4-diiodobenzene, respectively. No halogen exchange was observed in the reactions of acetyl iodide with fluorobenzene and hexafluorobenzene. Benzoyl iodide failed to react with chloro- and brombenzene under UV irradiation but underwent polycondensation with formation of black nonfusible oligomers which were found to possess paramagnetic and semiconducting properties. Ultraviolet irradiation of a mixture of MeCOI with 2- or 3-bromotoluene, as well as with 4-bromo-1,2-dimethylbenzene, also led to the formation of polymeric products as a result of polycondensation of aryl iodides formed initially via replacement of bromine by iodine. Irradiation of benzoyl iodide in 2- or 3-bromotoluene involved recombination of benzoyl radicals to give benzil as the only product.     

Palladium-catalyzed cross-coupling of aryl electrophiles with dimethylalkynylaluminum reagents

[reaction: see text] Alkynyldimethylaluminum reagents are easily available from terminal alkynes and trimethylaluminum via a triethylamine-catalyzed metalation. These compounds can react with various aromatic and heterocyclic halides in the presence of palladium in a fast and efficient way. This catalyzed cross-coupling reaction provides a simple entry to numerous internal alkynes, using a readily available, inexpensive, and nontoxic metalating agent.     

Manganese-catalyzed cross-coupling reactions of aliphatic amines with aryl halides

An efficient and convenient protocol has been developed for the N-arylation of aliphatic amines with differently substituted aryl halides using a MnCl₂·4H₂O/l-proline catalyst and NaOt-Bu as the base in DMSO.     

Palladium-catalyzed cross-coupling of benzyl thioacetates and aryl halides

A method for preparing benzyl aryl thioethers utilizing an in situ deprotection of benzyl thioacetates as an alternative to free thiols as starting materials has been developed and optimized. Good to excellent yields of diverse benzyl aryl thioethers are obtained with air-stable, odor-free, and easy to prepare thioesters. A one-pot protocol for forming benzyl aryl thioethers from a benzyl halide, potassium thioacetate, and an aryl bromide has also been demonstrated.     

Palladium-catalyzed cross-coupling reaction of tricyclopropylbismuth with aryl halides and triflates

The palladium-catalyzed cross-coupling reaction of tricyclopropylbismuth with aryl and heterocyclic halides and triflates is reported. The reaction tolerates numerous functional groups and does not require anhydrous conditions. The method was successfully extended to the cross-coupling of triethylbismuth.     

Iron-catalysed, hydride-mediated reductive cross-coupling of vinyl halides and Grignard reagents

An iron-catalysed, hydride-mediated reductive cross-coupling reaction has been developed for the preparation of alkanes. Using a bench-stable iron(II) pre-catalyst, reductive cross-coupling of vinyl iodides, bromides and chlorides with aryl- and alkyl Grignard reagents successfully gave the products of formal sp(3)-sp(3) cross-coupling reactions.     

Negishi cross-coupling of secondary alkylzinc halides with aryl/heteroaryl halides using Pd-PEPPSI-IPent

Pd-PEPPSI-IPent has proven to be an excellent catalyst for the Negishi cross-coupling reaction of secondary alkylzinc reagents with a wide variety of aryl/heteroaryl halides. Importantly, β-hydride elimination/migratory insertion of the organometallic leading to the production of isomeric coupling products has been significantly reduced using the highly-hindered Ipent ligand.