Bluish-Green BMes(2) -Functionalized Pt(II) Complexes for High Efficiency PhOLEDs: Impact of the BMes(2) Location on Emission Color

New phosphorescent Pt(II) compounds based on dimesitylboron (BMes(2) )-functionalized 2-phenylpyridyl (ppy) N,C-chelate ligands and an acetylacetonato ancillary ligand have been achieved. We have found that BMes(2) substitution at the 4'-position of the phenyl ring can blue-shift the phosphorescent emission energy of the Pt(II) compound by approximately 50?nm, compared to the 5'-BMes(2) substituted analogue, without substantial loss of luminescent quantum efficiencies. The emission color of the 4'-BMes(2) substituted Pt(II) compound, Pt(Bppy)(acac) (1) can be further tuned by the introduction of a substituent group at the 3'-position of the phenyl ring. A methyl substituent red-shifts the emission energy of 1 by approximately 10?nm whereas a fluoro substituent blue-shifts the emission energy by about 6?nm. Using this strategy, three bright blue-green phosphorescent Pt(II) compounds 1, 2 and 3 with emission energy at 481, 492, and 475?nm and Φ(PL) =0.43, 0.26 and 0.25, respectively, have been achieved. In addition, we have examined the impact of BMes(2) substitution on 3,5-dipyridylbenzene (dpb) N,C,N-chelate Pt(II) compounds by synthesizing compound 4, Pt(Bdpb)Cl, which has a BMes(2) group at the 4'-position of the benzene ring. Compound 4 has a phosphorescent emission band at 485?nm and Φ(PL) =0.70. Highly efficient blue-green electroluminescent (EL) devices with a double-layer structure and compounds 1, 3 or 4 as the phosphorescent dopant have been fabricated. At 100?cd?m(-2) luminance, EL devices based on 1, 3 and 4 with an external quantum efficiency of 4.7, 6.5 and 13.4?%, respectively, have been achieved.     

Diazaborolyl-boryl push-pull systems with ethynylene-arylene bridges as 'turn-on' fluoride sensors

Two linear π-conjugated systems with 1,3-diethyl-1,3,2-benzodiazaborolyl [C(6)H(4)(NEt)(2)B-] as a donor group and dimesitylboryl (-BMes(2)) as acceptor were synthesised with -ethynylene-phenylene- (-C[triple bond, length as m-dash]C-1,4-C(6)H(4)-, 3) and -ethynylene-thiophene- (-C[triple bond, length as m-dash]C-2,5-C(4)H(2)S-12) bridges between the boron atoms. An assembly (20) consisting of two diazaborolyl-ethynylene-phenylene-boryl units, [C(6)H(4)(NCy)(N')B-C[triple bond, length as m-dash]C-1,4-C(6)H(4)-BMes(2)] joined via a 1,4-phenylene unit at the nitrogen atoms (N') of the diazaborolyl units was also synthesised. The three push-pull systems, 3, 12 and 20, form salts on fluoride addition with the BMes(2) groups converted into (BMes(2)F)(-) anions. The molecular structures of 3, 12 and (NBu(4))(12·F) were elucidated by X-ray diffraction analyses. The borylated systems 3, 12 and 20 show intense blue luminescence in cyclohexane with quantum yields (Φ(fl)) of 0.99, 0.44 and 0.94, respectively, but weak blue-green luminescence in tetrahydrofuran (Φ(fl) = 0.02-0.05). The charge transfer nature of these transitions is supported by TD-DFT computations with the CAM-B3LYP functional. Addition of tetrabutylammonium fluoride to tetrahydrofuran solutions of 3 and 20 resulted in strong violet-blue luminescence with emission intensities up to 46 times more than the emission intensities observed prior to fluoride addition. Compounds 3 and 20 are demonstrated here as remarkable 'turn-on' fluoride sensors in tetrahydrofuran solutions.     

Stepwise intramolecular photoisomerization of NHC-chelate dimesitylboron compounds with C-C bond formation and C-H bond insertion

C,C-chelate dimesitylboron (BMes(2)) compounds containing an N-heterocyclic carbene (NHC) donor have been obtained. Single-crystal X-ray diffraction analyses established that the boron atom in these compounds is bound by four carbon atoms in a distorted tetrahedral geometry. Compared to previously reported N,C-chelate dimesitylboron compounds, the new C,C-chelate boron compounds have a much larger HOMO-LUMO energy gap (>3.60 eV). They do, however, respond to UV irradiation (300 nm) in the same manner as N,C-chelate BMes(2) compounds do, undergoing photoisomerization and converting to an intensely colored (yellow or orange) isomer A quantitatively, with a high quantum efficiency (0.60-0.75). NMR and single-crystal X-ray diffraction analyses established that the structure of A is similar to the dark isomers obtained from N,C-chelate BMes(2) compounds. However, unlike the N,C-chelate dark isomers that have the tendency to thermally reverse back to the light colored isomers, the isomers A of the C,C-chelate BMes(2) are thermally stable and no reverse isomerization was observed even when heated to 80 °C (or 110 °C) for hours. The most unusual finding is that isomers A undergo further photoisomerization when irradiated at 350 nm, forming a new colorless species B nearly quantitatively. NMR and single-crystal X-ray diffraction analyses established the structure of isomer B, which may be considered as an intramolecular C-H insertion product via a borylene intermediate. Mechanistic aspects of this unusual two-step photoisomerization process have been examined by DFT computational studies.     

Preparation and Characterization of Halogen-Boron-Phosphorus Compounds. X-ray Crystal Structures of X(3)B.P(SiMe(3))(3) and [X(2)BP(SiMe(3))(2)](2) (X = Cl, Br)

The 1:1 mole ratio reactions of boron trihalides (BX(3)) with tris(trimethylsilyl)phosphine [P(SiMe(3))(3)] produced 1:1 Lewis acid/base adducts [X(3)B.P(SiMe(3))(3), X = Cl (1), Br (2), I (5)]. Analogous 1:1 mole ratio reactions of these boron trihalides with lithium bis(trimethylsilyl)phosphide [LiP(SiMe(3))(2)] produced dimeric boron-phosphorus ring compounds {[X(2)BP(SiMe(3))(2)](2), X = Br (3), Cl (4)}. X-ray crystallographic studies were successfully conducted on compounds 1-4. Compound 1 crystallized in the orthorhombic space group Pbca, with a = 13.420(3) ?, b = 17.044(5) ?, c = 21.731(7) ?, V = 4970.6(25) ?(3), and D(calc) = 1.229 g cm(-3) for Z = 8; the B-P bond length was 2.022(9) ?, Compound 2 crystallized in the orthorhombic space group Pbca, with a = 13.581(6) ?, b = 17.106(7) ?, c = 22.021(9) ?, V = 5116(4) ?(3), and D(calc) = 1.540 g cm(-3) for Z = 8; the B-P bond length was 2.00(2) ?. Compound 3 crystallized in the monoclinic space group P2(1)/n, with a = 9.063(5) ?, b = 16.391(8) ?, c = 9.331(4) ?, V = 1379.2(12) ?(3), and D(calc) = 1.676 g cm(-3) for Z = 2; the B-P bond length was 2.023(10) ?. Compound 4 crystallized in the monoclinic space group P2(1)/n, with a = 9.143(5) ?, b = 16.021(8) ?, c = 9.170(4) ?, V = 1342.2(11) ?(3), and D(calc) = 1.282 g cm(-3) for Z = 2; the B-P bond length was 2.025(3) ?. Thermal decomposition studies were performed on compounds 1-4, yielding colored powders with boron:phosphorus ratios greater than 1:1 and significant C and H contamination indicated by elemental analyses.     

Photochemical E-Z isomerization of meta-terphenyl-protected phosphaalkenes and structural characterizations

A series of phosphaalkenes, E-ArP=C(H)Ar' (Ar = 2,6-Mes2C6H3, Ar' = Ph (1a); Ar = 2,6-Mes2C6H3, Ar' = p-C6H4Br (2a); Ar = 4-Br-2,6-Mes2C6H2, Ar' = Ph (3a); Ar = 4-Br-2,6-Mes2C6H2, Ar' = p-C6H4Br (4a)) have been prepared by phospha-Wittig reactions and characterized. Exposure of these materials either to room light over an extended period of time (days) or to UV light (hours) produced equilibrium mixtures of the E and Z isomers (1b-4b) as indicated by 1H and 31P NMR spectroscopy. The structures of compounds 4a and 4b were determined by single-crystal X-ray diffraction methods. Variable-temperature (1)H NMR studies of 4b indicate hindered rotation about the P-CAr bond, with DeltaH(double dagger) = 13.8 kcal/mol and DeltaS(double dagger) = 1.3 eu. The electronic structures of E- and Z-PhP=C(H)Ph have been examined using density functional theory.     

Reactions of perfluoro(2,3-epoxy-2-methylpentane) with o-phenylenediamine and ethylenediamine

Perfluoro(2,3-epoxy-2-methylpentane) reacted with o-phenylenediamine and ethylenediamine via cleavage of the C-C bond to produce 2,2,3,3,3-pentafluoro-N-[2-(2,2,2-trifluoro-1-trifluoromethylethylamino)-phenyl]propanamide and 2,2,3,3,3-pentafluoro-N-[2-(2,2,2-trifluoro-1-trifluoromethylethylamino)ethyl]-propanamide, respectively. Presumably, these compounds are formed as a result of rearrangement of intermediate ketone generated by intramolecular haloform-type reaction. According to the NMR and X-ray diffraction data, 2,2,3,3,3-pentafluoro-N-[2-(2,2,2-trifluoro-1-trifluoromethylethylamino)phenyl]propanamide in crystal exists as Z conformer with respect to the amide C-N bond.     

Cp2V] migration along an octatetrayne chain: from the monometallic complex (Cp2V(2-4eta-tBuC triple bond C2-C triple bond CC triple bond CtBu)] to the dimetallic complex

The oxidative addition of one equivalent of [Cp2V] (4) to the tetrayne ligand tBuC triple bond CC triple bond CC triple bond CC triple bond CtBu (5) gives the monometallic complex [Cp2V(3-4eta-tBuC triple bond C-C2-C triple bond CC triple bond CtBu)] (7). Compound 7 reacts further with a second equivalent of [Cp2V] to give the dimetallic complex [(Cp2V)2(1-2eta:7-8eta-tBuC2-C triple bond CC triple bond C-C2tBu)] (8), which involves a shift of the first coordinated [Cp2V] unit from the internal C3-C4 to the external C1-C2 positions on the alkynyl ligand. Compound 8 is also directly obtained by the addition of two equivalents of [Cp2V] to 5. Reversibly, reaction of 8 with 5 leads to 7. This exchange reaction between 7 and 8 by adding successively 5 and 4 has been monitored by EPR spectroscopy. By contrast, the oxidative addition of one or two equivalents of [Cp2V] to the tetrayne ligand PhC triple bond CC triple bond CC triple bond CC triple bond CPh (6) gives the homodimetallic complex [(Cp2V)2(1-2eta:7-8eta-PhC2-CC triple bond CC triple bond C-C2-Ph)] (9). Both monometallic and dimetallic complexes 7, 8, and 9 have been characterized by X-ray diffraction. Magnetic moment measurements for 8 and 9 from 300 to 4 K indicated a weak antiferromagnetic J exchange coupling of -12.5 and -4.1 cm(-1), respectively.     

Control of two-electron four-center (2e-/4c) C-C bond formation observed for tetracyanoethenide dimerization, [TCNE]2(2-)

Cu(PPh3)3(TCNE) (TCNE = tetracyanoethylene) and 14 other examples form [TCNE]22- dimers possessing a long 2.89 +/- 0.05 A two-electron four-center (2e-/4c) C-C bond in the solid state. This bond arises from the overlap of the b2g pi* singly occupied molecular orbital (SOMO) on each [TCNE]*- fragment, forming a filled bonding orbital of b2u symmetry, and the stabilizing effect of the cation...anion interactions in the crystal that exceed the anionic repulsion. In contrast, Mn(C5H5)(CO)2(TCNE) exhibits a related, but different, [TCNE]*-...TCNE]*- motif in the solid state that lacks the 2e-/4c C-C bonding. To better understand the unusual nature of 2e-/4c C-C bonding, the genesis of the differences between their respective pi-[TCNE]*-...TCNE]*- interactions was sought. The lack of 2e-/4c C-C bond formation is attributed to the weaker radical character of the [TCNE]*- ligand, which has a total spin population of only 0.5 electron, half of that required for two S = 1/2 [TCNE]*- moieties to form a [TCNE]22- dimer. Hence, the antiferromagnetic MnII-[TCNE]*- intramolecular interaction (between the formally S = 1/2 Mn-bound [TCNE]*- and the paramagnetic Mn(II)) dominates over the intermolecular pi-[TCNE]*--[TCNE]*- spin coupling (between two S = 1/2 [TCNE]*- needed to form [TCNE]22-). Therefore, by selecting specific metal ions that can interact with sigma-[TCNE]*-, dimerization forming [TCNE]22- can be favored or disfavored.     

Variable coordination modes of hydrotris(3-isopropyl-4-bromopyrazolyl)borate (Tp') in Fe(II), Mn(II), Cr(II), and Cr(III) Complexes: formation of MTp'Cl (M = Fe and Mn), structural isomerism in CrTp'(2), and the observation of Tp' (-) as an uncoordinated anion

The syntheses of the 4-coordinate Tp'MCl complexes (where M = Fe (1), Mn (2); and Tp' = hydrotris(3-isopropyl-4-bromopyrazolyl)borate) are described. The single-crystal X-ray structures show that the metal centers have distorted tetrahedral coordination. Analogous reaction of CrCl(2)(MeCN)(2) with TlTp' gave Cr(kappa(3)-Tp')(kappa(2)-Tp') (3) as the initial product. The 5-coordinate structure was assigned by single-crystal X-ray crystallography, and it was found that the kappa(3) ligand had isomerized to hydro(3-isopropyl-4-bromopyrazolyl)(2)(5-isopropyl-4-bromopyrazolyl)borate). 3 is labile in solution: in pentane it slowly converts to the 6-coordinate isomer Cr(kappa(3)-Tp')(2) (4), whose structure was determined by X-ray crystallography. In 4 both ligands are isomerized. Both 3 and 4 display Jahn-Teller distorted structures expected for high-spin d(4) configurations. Variable temperature magnetic susceptibility measurements confirm that 1, 2, and 3 all have high-spin electronic configurations in the range 5-300 K. In benzene solution 3 decomposes; one product [Cr(kappa(3)-Tp')(2)](+)[Tp'](-) (5), was identified by X-ray crystallography. 5 contains a pseudooctahedral Cr(III) cation with both ligands in the isomerized form and an uncoordinated Tp' ligand as counterion. Mechanistic studies reveal that this reaction is light rather than heat induced. IR spectroscopy is utilized to confirm the ligand hapticity in all complexes from the value of nu(B)(-)(H), and comparison is made with similar compounds.     

Stereocontrolled synthesis of piperidine-condensed tricyclic carbapenems (5-azatrinems) and their antibacterial activities

Stereocontrolled synthesis of tricyclic carbapenem (5-azatrinem) derivatives 4, in which a piperidine ring is condensed to the carbapenem skeleton, was achieved. The pivotal tricyclic intermediate 2, allyl (8S,9R,10S)-5-(tert-butoxycarbonyl)-10-(R)-1-(tert-butyldimethylsilyl oxy)ethyl]-11-oxo-1,5-diazatricyclo[7.2.0.0(3,8)]undec-2- ene-2-carboxylate, was synthesized starting from an acetoxyazetidinone chiron 6 in a practical manner based on a C-C bond formation reaction between 6 and piperidinone-ester 5, palladium-catalyzed de(allyloxy)carbonylation of 7b and Wittig-type cyclization via an oxalimide 9. Selective deprotection of the N-Boc group of 2 was found to proceed smoothly by treatment with trimethylsilyl trifluoromethanesulfonate and 2,6-lutidine to give the amino compound 3, whose functionalization on the nitrogen atom to derivatives 10 followed by deprotection led to various 5-azatrinem acids 4. These compounds showed potent in vitro activities against gram-positive and gram-negative bacteria.     

Inhibiting olefin cis, trans-photoisomerization and enhancing electron-accepting ability of a diboryl compound by metal chelation

To examine the impact of metal chelation on cis-trans olefin bond isomerization and the photo-stability of N,C-chelate photochromic boron compounds, a new π-conjugated molecule B-BPY that incorporates a 2,2'-bipy unit, two olefin bonds, and two BMes(2)(ppy) chromophores has been synthesized and found to stabilize the molecule toward olefin photoisomerization upon binding with a metal ion.     

Soluble Ni alkoxides based on dimethylaminoisopropoxide ligands: molecular structure of [Li(PrOH)Ni (η-OR)2Cl]2 and of cis-NiCl2(ROH)2 (R = CHMeCH2NMe2)

Various routes to Ni^II aminoalkoxides have been investigated. A nickel isopropoxide derivative 1 was prepared by anodic dissolution of the metal in the presence of LiCl as electrolyte. Alcoholysis reactions of 1 with 1-dimethylamino-2-propanol afforded the homoleptic nickel(II) aminoalkoxide 2 together with a Ni---Li species 3. 2 was also obtained by metathesis reactions between sodium alkoxide and the nickel hexammine complex whereas the reaction between the latter and the aminoalcohol led to an halide solvate, cis-NiCl₂(η²-ROH)₂, 4. The various compounds were characterized by elemental analysis, FT-IR and UV-vis spectroscopies as well as by X-ray diffraction for 3 and 4. 3 corresponds to [Li(PrⁱOH)Ni(η²-OCHMeCH₂NMe₂)Cl]₂ and the overall structure can be seen as two [Ni(η²-OCHMeCH₂NMe₂)₂Cl]⁻ moieties assembled by Li(PrⁱOH)⁺. The lithium atom is 4-coordinate due to its interaction with the oxygen atoms of the aminoalkoxide ligands. Nickel is 5-coordinate with a distorted tetragonal pyramidal stereochemistry, one nitrogen being in the apical position. The metal displays a distorted octahedral surrounding for the NiCl₂ adduct 4. The bond distances vary in the order Ni---OR < Ni---N ≈ Ni---O(H)R < Ni---Cl for 3 and 4. The various compounds (except 1) are soluble in organic media.     

In(8)(C(6)H(3)-2,6-Mes(2))(4) (Mes=C(6)H(2)-2,4,6-Me(3)): A Metal-Rich Main-Group Cluster with a Distorted Cubane Structure

A distorted In(8) cubane core (see picture) is present in the novel indium cluster In(8)(C(6)H(3)-2,6-Mes(2))(4) (Mes=C(6)H(2)-2,4,6-Me(3)), which was synthesized by the reaction of LiC(6)H(3)-2,6-Mes(2) with InCl. It has an average In-In bond length of 2.92 ? and represents a new addition to the range of heavier Group 13 element clusters.     

Structure and Properties of 3-(Diethylboryl)pyridines(1)

3-(Diethylboryl)pyridine (1a), a versatile starting material for the preparation of arylpyridines, is notable for its stability under ambient conditions, in spite of little steric hindrance on the boron atom. (1)H and (13)C spectra of 1a indicated that the boryl group does not act as a mere pi-acceptor and that the boron atom is shielded by ca. 50 ppm even when compared with trivalent boron atoms conjugated with the pi-donor. A single-crystal X-ray crystallographic study for 1a revealed formation of a cyclic-tetramer with a void via the intermolecular boron-nitrogen coordination bond. Vapor pressure osmometry in various solvents suggested that 1a comprises the tetramer in these solutions. In order to know the actual structure, synthesis of 3-(2-methoxyethoxy)-5-(diethylboryl)pyridine (1b) and its scrambling experiment with 1a were carried out. Heating at 100 degrees C for 24 h was required to attain the equilibrium of the scrambling of the component molecules in the tetramers. This means that 3-(diethylboryl)pyridines 1a and 1b comprise the rigid cyclic-tetramer in solution at ambient temperature. Compound 1b is stable in aerated tetrahydrofuran containing up to 33 % water.     

Development of diversified methods for chemical modification of the 5,6-double bond of uracil derivatives depending on active methylene compounds

The reaction of 5-halogenouracil and uridine derivatives 1 and 7 with active methylene compounds under basic conditions produced diverse and selective C-C bond formation products by virtue of the nature of the carbanions. Three different types of reactions such as the regioselective C-C bond formation at the 5- and 6-positions of uracil and uridine derivatives (products 2, 5, 8, 17, 20 and 21), and the formation of fused heterocycle derivatives 2,4-diazabicyclo[4.1.0]heptane (15) and 2,4-diazabicyclo-[4.1.0]nonane (16) via dual C-C bond formations at both the 5- and 6-positions were due to the different active methylene compounds used as reagents.     

2,6-Mes(2)C(6)H(3)](2)Ga(+)Li[Al(OCH(CF(3))(2))(4)](2)(-) (Mes = 2,4,6-Me(3)C(6)H(2)): A compound containing a linear unsolvated two-coordinate gallium cation

The title compound [2,6-Mes(2)C(2)H(3)](2)Ga(+)Li[Al(OCH(CF(3))(2))(4)](2)(-), 1, containing a linear two-coordinate gallium cation, has been obtained by metathesis reaction of [2,6-Mes(2)C(2)H(3)](2)GaCl with 2 equiv of Li[Al(OCH(CF(3))(2))(4)] in C(6)H(5)Cl solution at room temperature. Compound 1 has been characterized by (1)H, (13)C((1)H), (19)F, and (27)Al NMR spectroscopy and X-ray crystallography. Compound 1 consists of isolated [2,6-Mes(2)C(6)H(3)](2)Ga(+) cations and Li[Al(OCH(CF(3))(2))(4)](2)(-) anions. The C-Ga-C angle is 175.69(7) degrees, and the Ga-C distances are 1.9130(14) and 1.9145(16) A. The title compound is remarkably stable, is only a weak Lewis acid, and polymerizes cyclohexene oxide.     

C(arenium)-C(alkyl) bond making and breaking: key process in the platinum-mediated C(aryl)-C(alkyl) bond formation. Analogies to organic electrophilic aromatic substitution

The reaction of cationic platinum aqua complexes 2 [Pt(C(6)H(2)[CH(2)NMe(2)](2)-E-4)(OH(2))](X') (X' = SO(3)CF(3), BF(4)) with alkyl halides RX gave various air-stable arenium complexes 3-5 containing a new C-C bond (R = Me, 3; Et, 4; Bn, 5). Electron-releasing oxo-substituents on the aromatic ligand (E = e.g., OH, b; OMe, c) enhance the reactivity of the aqua complex 2 and were essential for arenium formation from alkyl halides different from MeX. This process is initiated by oxidative addition of alkyl halides to the platinum(II) center of 2, which affords (alkyl)(aryl) platinum(IV) complexes (e.g., 9, alkyl = benzyl) as intermediates. Spectroscopic analyses provided direct evidence for a subsequent reversible 1,2-sigmatropic shift of the alkyl group along the Pt-C(aryl) bond, which is identical to repetitive C(arenium)-C(alkyl) bond making and breaking and concerted metal reduction and oxidation. Temperature-dependent NMR spectroscopy revealed DeltaH degrees = -1.3 (+/- 0.1) kJ mol(-1), DeltaS degrees = +3.8 (+/- 0.2) J mol(-1) K(-1), and DeltaG degrees (298) = -2.4 (+/- 0.1) kJ mol(-1) for the formation of the arenium complex 5b from 9 involving the migration of a benzyl group. The arenium complexes were transformed to cyclohexadiene-type addition products 7 or to demetalated alkyl-substituted arenes, 8, thus completing the platinum-mediated formation of a sp(2)-sp(3) C-C bond which is analogous to the aromatic substitution of a [PtX](+) unit by an alkyl cation R(+). The formation of related trimethylsilyl arenium complexes 6 suggests arenium complexes as key intermediates, not only in (metal-mediated) sp(2)-sp(3) C-C bond making and breaking but also in silyl-directed cyclometalation.     

Reaction of nido-7,8-C(2)B(9)H(13) with Dicobalt Octacarbonyl: Crystal Structures of the Complexes [Co(2)(CO)(2)(eta(5)-7,8-C(2)B(9)H(11))(2)], [Co(2)(CO)(PMe(2)Ph)(eta(5)-7,8-C(2)B(9)H(11))(2)], and [CoCl(PMe(2)Ph)(2)(eta(5)-7,8-C(2)B(9)H(11))

The compounds [Co(2)(CO)(8)] and nido-7,8-C(2)B(9)H(13) react in CH(2)Cl(2) to give a complex mixture of products consisting primarily of two isomers of the dicobalt species [Co(2)(CO)(2)(eta(5)-7,8-C(2)B(9)H(11))(2)] (1), together with small amounts of a mononuclear cobalt compound [Co(CO)(2)(eta(5)-10-CO-7,8-C(2)B(9)H(10))] (5) and a charge-compensated carborane nido-9-CO-7,8-C(2)B(9)H(11) (6). In solution, isomers 1a and 1b slowly equilibrate. However, column chromatography allows a clean separation of 1a from the mixture, and a single-crystal X-ray diffraction study revealed that each metal atom is ligated by a terminal CO molecule and in a pentahapto manner by a nido-C(2)B(9)H(11) cage framework. The two Co(CO)(eta(5)-7,8-C(2)B(9)H(11)) units are linked by a Co-Co bond [2.503(2) ?], which is supported by two three-center two-electron B-H right harpoon-up Co bonds. The latter employ B-H vertices in each cage which lie in alpha-sites with respect to the carbons in the CCBBB rings bonded to cobalt. Addition of PMe(2)Ph to a CH(2)Cl(2) solution of a mixture of the isomers 1, enriched in 1b, gave isomers of formulation [Co(2)(CO)(PMe(2)Ph)(eta(5)-7,8-C(2)B(9)H(11))(2)] (2). Crystals of one isomer were suitable for X-ray diffraction. The molecule 2a has a structure similar to that of 1a but differs in that whereas one B-H right harpoon-up Co bridge involves a boron atom in an alpha-site of a CCBBB ring coordinated to cobalt, the other uses a boron atom in the beta-site. Reaction between 1b and an excess of PMe(2)Ph in CH(2)Cl(2) gave the complex [CoCl(PMe(2)Ph)(2)(eta(5)-7,8-C(2)B(9)H(11))] (3), the structure of which was established by X-ray diffraction. Experiments indicated that 3 was formed through a paramagnetic Co(II) species of formulation [Co(PMe(2)Ph)(2)(eta(5)-7,8-C(2)B(9)H(11))]. Addition of 2 molar equiv of CNBu(t) to solutions of either 1a or 1b gave a mixture of two isomers of the complex [Co(2)(CNBu(t))(2)(eta(5)-7,8-C(2)B(9)H(11))(2)] (4). NMR data for the new compounds are reported and discussed.     

Cine Substitution in 2-Oxabicyclo[4.2.0]octanones and Subsequent Unusual Rearrangements(1)

Reaction of 2-chlorooxabicyclo[4.2.0]octanone 5 with several nucleophiles was examined and found to differ significantly from those of carbon analog 1. MeO(-) and PhS(-) led either to products of cine substitution 9 or of ring opening to cyclobutenones 8. With most enolates cine substitution occured via C-alkylation of the intermediate oxidoallyl cation in spite of formation of a new C-C bond between two quaternary carbons; with nitroalkanes O-alkylation was preferred. With azide as a nucleophile, further transformations occurred, among them an oxy-promoted electrocyclic cyclobutane opening, with incorporation of a phenyl triazole unit and final formation of the unusual product 19a. Evidence for a mechanism explaining formation of 19a was obtained by isolation of intermediates. Thermolysis or photolysis of 8e or9b led via electrocyclic ring opening to a vinyl ketene which was trapped by MeOH, alkenes, dienes, or oxygen to produce polyfunctional unsaturated esters 29 and 30 or 8-membered ring lactone 31, fused cyclobutanones 33 and 34, pyranone 38, or gamma-lactone 39, respectively.     

Photochemistry of 2-(1-naphthyl)-2H-azirines in matrixes and in solutions: wavelength-dependent C-C and C-N bond cleavage of the azirine ring

The photochemistry of 3-methyl-2-(1-naphthyl)-2H-azirine (1a) was investigated by the direct observation of reactive intermediates in matrixes at 10 K and by the characterization of reaction products in solutions. As already reported, the photolysis of the azirine 1a with the short-wavelength light (>300 nm) caused the C-C bond cleavage of the 2H-azirine ring to produce the nitrile ylide 2. However, the products derived from the C-N bond cleavage were exclusively obtained in the irradiation of 1a with the long-wavelength light (366 nm) both in matrixes and in solutions. When 1a was irradiated in the presence of O(2) with the long-wavelength light, acetonitrile oxide (6) was produced through the capture of the biradical 4 generated by the C-N bond cleavage of 1a with O(2). An introduction of a nitro group into the naphthyl ring of 1a resulted in an acceleration of the decomposition in the long-wavelength irradiation and an extension of the wavelength region where the products derived from the C-N bond cleavage were selectively obtained. On the basis of molecular orbital calculations with the INDO/S method, the reason for the wavelength-dependent selective C-C and C-N bond cleavage of the azirine ring of 1a is discussed.