Photophysical properties of a new DyLight 594 dye

We describe spectral properties of novel fluorescence probe DyLight? 594. Absorption and fluorescence spectra of this dye are in the region of Alexa 594 fluor spectra. The quantum yield of DyLight 594 in conjugated form to IgG is higher than corresponding quantum yield of Alexa 594 by about 50%. The new DyLight dye also shows slightly longer lifetime and photostability. These favorable properties and high anisotropy value, as well as a high cross-section for two-photon excitation, make this fluorophore attractive as a fluorescence probe in biochemical/biological studies involving fluorescence methods.     

Synthesis and characterization of highly conjugated, chiral bridging ligands

This paper describes the synthesis of four chiral derivatives of the electronically highly conjugated tetra-2-pyridylpyrazine (TPPZ) bridging ligand, which are denoted (R)- and (S)-4,5- and 5,6-pineno-tetra-2-pyridylpyrazine (PTPPZ). Preparation of these ligands was undertaken through the use of commercially available, enantiomerically pure (1R)- and (1S)-alpha-pinene, which was functionalized and subsequently employed in a Krohnke pyridine synthesis involving a furan-substituted pyridinium salt to yield a chiral, furan-substituted pyridyl intermediate. Oxidative degradation and subsequent reduction of this furan led to a chiral, substituted 2-pyridylaldehyde, which underwent a pyridoin condensation followed by cyclization to produce the final PTPPZ ligands.     

Photophysical and photochemical effects of dye binding

Abstract— A discussion is given of the photophysical and photochemical consequences of the binding of dyes and of pigments of biological importance to polymeric substrates. The modification of the photochemical properties induced by dye binding can in large part be ascribed to the known changes in photophysical properties of dyes engendered by such interactions. Principally, these involve enhanced formation of metastable species of dye molecules and decreased opportunity for self-quenching. In photochemical terms, dye binding thus enhances susceptibility to photoreduction, causes an increase in the quantum yield of photoreduction with increasing concentration of bound dye, and induces enhanced ability to act as a sensi-tizer in photoreduction. Paradoxically, dye binding decreases the ability of the bound dye to act as a sensitizer in photoxidation.     

Photophysical, crystallographic, and electrochemical characterization of symmetric and unsymmetric self-assembled conjugated thiopheno azomethines

Novel conjugated azomethines consisting uniquely of thiophene units are presented. The highly conjugated compounds were synthesized by simple condensation of a stable diamino thiophene (2) with its complementary thiophene aldehydes. These interesting nitrogen-containing thiophene units exhibit variable reactivity leading to controlled aldehyde addition. Because of the different amino reactivity, a one-pot synthesis of unsymmetric and symmetric conjugated azomethines with varying number of thiophene units was possible by judicious choice of solvent and careful control of reagent stoichiometry. The resulting covalent conjugated connections are both reductively and hydrolytically resistant. The thermodynamically E isomer is formed uniquely for all of the azomethines synthesized, which is confirmed by crystallographic studies. These also demonstrated that the azomethine bonds and the thiophene units are highly planar and linear. The fluorescence and phosphorescence of the thiopheno azomethines measured are similar to those of thiophene analogues currently used in functional devices, but with the advantage of low triplet formation and band-gaps as low as 1.9 eV. The time-resolved and steady-state temperature-dependent photophysics revealed the thiopheno azomethines do not populate extensively their triplet manifold by intersystem crossing. Rather, their excited-state energy is dissipated predominantly by nonradiative means of internal conversion. Quasi-reversible electrochemical radical cation formation of the thiophene units was found. These compounds further undergo electrochemically induced oxidative cross-coupling, resulting in conjugated products that also exhibit reversible radical cation formation.     

An efficient synthetic approach to highly conjugated porphyrin-based assemblies containing a bipyridine moiety

[structure: see text] An efficient and potential stepwise strategy involving the mixed sequence of Stille and Wittig-Horner reactions was used for the preparation of a polyene-substituted bis-porphyrin incorporating a bipyridine moiety.     

Blue/red linear dichroic emission from a highly anisotropic crystal of triarylmethane dye conjugated with phenoxo-zinc complexes

We have developed a novel triphenylmethane-based hexanuclear zinc complex that exhibits peculiar photochemical and photophysical properties. Upon UV irradiation, the compound turned from colorless to reddish purple, while the color of emission turned from blue to red. The color change was attributed to an oxidation of the ligand part. It was suggested that an intramolecular energy-transfer mechanism operates to give rise to the red emission. The UV treatment of a single crystal results in simultaneous emission of orthogonally polarized blue and red light. This color switching, namely linear dichroic emission was so distinct that one can recognize with by sight through optical microscope. The columnar arrangement of molecules in the crystal clearly accounts for the observed polarization of the emission.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.     

Photophysical characterization of a cytidine-guanosine tethered phthalocyanine-fullerene dyad

A new non-covalent electron transfer model system, based on the use of cytidine-guanosine hydrogen bonding interactions, is described that incorporates a phthalocyanine photodonor and a C60 fullerene acceptor.     

Photophysical properties of photoactive molecules with conjugated push-pull structures

The photophysical properties of two newly synthesized photoactive compounds with asymmetrical D-pi-A structure and symmetrical D-pi-A-pi-D structure are investigated in different aprotic solvents by steady-state and femtosecond fluorescence depletion measurements. It is found that the asymmetrical DA compound has larger dipole moment change than that of the symmetrical DAD compound upon excitation, where the dipole moments of the two compounds have been estimated using the Lippert-Mataga equation. Furthermore, the steady-state spectral results show that increasing solvent polarity results in small solvatochromic shift in the absorption maxima but a large red shift in the fluorescence maxima for them, indicating that the dipole moment changes mainly reflect the changes of dipole moment in excited-state rather than in ground state. The red-shifted fluorescence band is attributed to an intramolecular charge transfer (ICT) state upon photoexcitation, which could result in a strong interaction with the surrounding solvents to cause the fast solvent reorganization. The resulting ICT states of symmetrical compounds are less polar than the asymmetrical compounds, indicating the different extents of stabilization of solute-solvent interaction in the excited state. Femtosecond fluorescence depletion measurements are further employed to investigate the fast solvation effects and dynamics of the ICT state of these two novel compounds. The femtosecond fluorescence depletion results show that the DA compound has faster solvation time than that of DAD compound, which corresponds to the formation of relaxed ICT state (i.e., a final ICT state with rearranged solvent molecules after solvation) in polar solvents. It is therefore reasonably understood that the ICT compounds with asymmetrical (D-pi-A) structure have better performance for those photovoltaic devices, which strongly rely on the nature of the electron push-pull ability, compared to those symmetrical compounds (D-pi-A-pi-D).     

Chemical characterization and anti-hemolytic anemia potentials of tin nanoparticles synthesized by a green approach for bioremediation applications

The therapeutic properties of tin nanoparticles have been proved in recent years. One of their probable effects is anti-anemia. In this study, tin nanoparticles were synthesized and characterized in aqueous medium using Ziziphora clinopodioides Lam leaf aqueous extract as the reducing and stabilizing agent. We also assessed the antihemolytic anemia potential of tin nanoparticles (SnNPs) in an animal model of hemolytic anemia. Tin nanoparticles were characterized using many techniques including Fourier transform-infrared and UV-visible spectroscopy, X-ray diffraction (XRD), energy dispersive X-ray spectrometry, and field emission-scanning electron microscopy (FE-SEM). FE-SEM images showed a uniform spherical morphology in size of 18.12 nm for the green synthesized nanoparticles. According to XRD analysis, SnNPs crystal size was17.94 nm. SnNPs had low cell viability dose-dependently against human umbilical vein endothelial cell line. in vivo design, induction of hemolytic anemia was done by phenylhydrazine in 40 mice. Tin nanoparticles significantly (p ≤ 0.01) reduced the weight and volume of liver and spleen and the concentration of pro-inflammatory cytokines, and increased the body weight, anti-inflammatory cytokines concentration, total platelet, WBC, neutrophil, lymphocyte, eosinophil, monocyte, and basophil counts, and red blood cell parameters compared to the untreated mice. For the biochemical parameters, SnNPs significantly (p ≤ 0.01) increased the concentrations of GPx, CAT, and SOD in serum, liver, and spleen and decreased the concentration of GR in serum, liver, and spleen, and also erythropoietin, ferritin, and ferrous in serum as compared to the anemic mice. The 2,2-diphenyl-1-picrylhydrazyl test showed similar antioxidant activities for SnNPs and butylated hydroxytoluene. The results demonstrate the excellent antihemolytic anemia, hematoprotective, cytotoxicity, and antioxidant potentials of SnNPs compared to other experimental groups.     

Synthesis of a novel highly conjugated conducting polymer

The new conjugated polyacetylene derivative dehydrated poly(4-hydroxy-4-phenyl-1-butyne) [dehydrated poly(HPB)] was synthesized from poly(4-hydroxy-4-phenyl-1-butyne) [poly(HPB)], which was obtained by the polymerization of 4-hydroxy-4-phenyl-1-butyne. The resulting dehydrated poly(HPB) was soluble in common organic solvents. The dehydrated poly(HPB) was found to have extended conjugated polyene structure. The dehydrated poly(HPB) was thermally stable up to 300°C. The electrical conductivity of I₂-doped dehydrated poly(HPB) was 10⁻² S cm⁻¹. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 949–953, 1998     

Sensitization of TiO2 by a symmetric anionic polymethine dye with three conjugated chromophores

Research on Chemical Intermediates - Based on the analysis of spectral, electrochemical and energy parameters of the anionic polymethine dye...     

Photophysical characterization of natural cis-carotenoids.

By means of steady-state fluorescence spectroscopy we explore the photophysics of two lowest lying singlet excited states in two natural 15-cis-carotenoids, namely phytoene and phytofluene, possessing three and five conjugated double bonds (N), respectively. The results are interpreted in relation to the photophysics of all-transcarotenoids with varying N. The fluorescence of phytofluene is more Stokes-shifted relative to that of phytoene, and is ascribed to the forbidden S1-->S0 transition, with its first excited singlet state (S1) lying 3340 cm-1 below the dipole allowed second excited singlet state (S2), at 77 K. For phytoene the S2 and S1 potential surfaces are closer in energy, probably giving rise to the mixed S2 and S1 fluorescence characteristics. The origin of phytoene fluorescence is discussed and is suggested to be due to the S1-->S0 transition; with the S1 state located 1100 cm-1 below S2 at 77 K. The dependence of the fluorescence quantum yield on temperature and viscosity shows that large amplitude molecular motions are involved in the radiationless relaxation process of phytoene. The transition dipole moment of absorption and emission are parallel in phytoene and nonparallel in phytofluene.     

Titanium-rich highly ordered mesoporous silica synthesized by using a mixed surfactant system

A new titanium-rich highly ordered 2-D hexagonal mesoporous titanium silicate has been synthesized using a mixture of cationic (cetyltrimethylammonium bromide, CTAB) and non-ionic (Brij-35, C₁₂H₂₅-(OC₂H₄)₂₃-OH, a polyether and aliphatic hydrocarbon chain surfactant) mixed surfactant system as the supramolecular structure directing agent (SDA) in the presence of tartaric acid (TA) as a mineralizer of Ti(IV). XRD, N₂ adsorption and TEM data suggested the presence of mesophase with hexagonal pore arrangements and the UV-visible, FT IR and XPS studies suggested the incorporation of mostly tetrahedral titanium (IV) species in the highly ordered silica network. This mesoporous titanium silicate material showed excellent catalytic activity and selectivity in the epoxidation of styrene using dilute aqueous H₂O₂ as oxidant.     

Simple voltammetric approach for characterization of two-step surface electrode mechanism in protein-film voltammetry

Many enzymes embedding multivalent metal ions or quinone moieties as redox-active centres undergo electrochemical transformation via two successive electron transfer steps. If electrochemical features of such redox enzymes are analyzed with “protein-film voltammetry”, one frequently meets a challenging reaction scenario where the two electron transfers take place at the same formal potential. Under such conditions, one observes voltammogram with a single oxidation-reduction pattern hiding voltammetric features of both redox reactions. By exploring some aspects of the two-step surface EECrev mechanism one can develop simple methodology under conditions of square-wave voltammetry to enable recognizing and characterizing each electron transfer step. The method relies on the voltammetric features of the second electron transfer, which is coupled to a follow-up chemical reaction. The response of the second electron transfer step shifts to more positive potentials by increasing the rate of the chemical reaction. The proposed methodology can be experimentally applied by modifying the concentration of an electrochemically inactive substrate, which affects the rate of the follow-up chemical reaction. The final voltammetric output is represented by two well-separated square-wave voltammetric peaks that can be further exploited for complete thermodynamic and kinetic analysis of the EECrev mechanism.

     

Conversion of a Direct Process high-boiling residue to monosilanes by a two-step catalysis approach

The effects of different kinds of catalysts and supports on the conversion of a Direct Process high-boiling residue to monosilanes were evaluated. A new method, a two-step catalysis approach, was used for catalytic decomposition and redistribution reactions. The effects of reaction temperature, volume ratio of starting materials, feeding rate and reaction pressure on the conversion were investigated. While employing activated carbon as the decomposition catalyst and γ-Al₂O₃ for redistribution, which constituted the two-step catalysis approach, improved yield of methylchlorosilanes and dimethyldichlorosilane, and higher conversion of high-boiling components decomposition could be obtained. This two-step catalysis approach could be run under normal pressure or low pressure, which would solve the disadvantageous factors generated from the high-pressure process.     

Photophysical behavior of a dimeric cyanine dye (BOBO-1) within cationic liposomes

This study is aimed at establishing optimal conditions for the use of 2,2'-[1,3-propanediylbis[(dimethyliminio)-3,1-propanediyl-1(4H)-pyridinyl-4-ylidenemethy-lidyne]]bis[3-methyl]-tetraiodide (BOBO-1) as a fluorescent probe in the characterization of lipid/DNA complexes (lipoplexes). The fluorescence spectra, anisotropy, fluorescence lifetimes and fluorescence quantum yields of this dimeric cyanine dye in plasmid DNA (2694 base pairs) with and without cationic liposomes (1,2-dioleoyl-3-trimethylammonium-propane [DOTAP]), are reported. The photophysical behavior of the dye in the absence of lipid was studied for several dye/DNA ratios using both supercoiled and relaxed plasmid. At dye/DNA ratios (d/b) below 0.01 the fluorescence intensity increases linearly, whereas lifetime and anisotropy values of the dye are constant (tau approximately 2.5 ns and = 0.20). By agarose gel electrophoresis it was verified that up to d/b = 0.01 DNA conformation is not considerably modified, whereas for d/b = 0.05-0.06 a single heavy band appears on the gel. For these and higher dye/DNA ratios the fluorescence intensity, anisotropy and average lifetime values decrease with an increase in BOBO-1 concentration. When cationic liposomes are added to the BOBO-1/DNA complex, an additional effect is noticed: The difference in the environment probed by BOBO-1 bound to DNA leads to a decrease in quantum yield and average lifetime values, and a redshift is apparent in the emission spectrum. For fluorescence measurements including energy transfer (FRET), a d/b ratio of 0.01 seems to be adequate because no considerable change on DNA conformation is detected, a considerable fluorescent signal is still measured after lipoplex formation, and energy migration is not efficient.     

Direct metallation of cyclic conjugated hydrocarbons by highly reactive magnesium

Conclusions Organomagnesium compounds have been prepared by the direct metallation of cyclopentadiene, indene, fluorene, and cyclooctatetraene and by highly reactive magnesium. Their crosscombination with allyl and propargyl electrophiles in the presence of metal complex catalysts has been studied, this leading to the allyl and propargyl substituted hydrocarbons being obtained in high yields.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 428–431, February, 1988.     

液相合成方形PbS纳米晶的光学特性

采用一种简单、温和的液相合成方法制备了PbS纳米晶，利用透射电镜和高分辨透射电镜对PbS纳米晶的形貌与晶型结构进行了表征．研究了PbS纳米晶的光学吸收和光致发光特性，并比较分析了包覆剂聚乙烯吡咯烷酮(PVP)和回流时间对产物光学特性的影响．结果表明：PVP分子链中的O原子与纳米晶表面吸附的游离态Pb原子形成Pb-O配位键，使产物的激子吸收大为减弱，同时引起了表面浅束缚态能量的升高，最终导致了荧光淬灭现象．