新型疏水缔合聚合物P(AM/POEA)与表面活性剂的相互作用

采用粘度法、荧光探针和透射电镜研究了新型疏水缔合聚合物P(AM/POEA)和表面活性剂SDS和CTAB在水溶液中的相互作用. 聚合物P(AM/POEA)结构中, 疏水体(2-苯氧乙基丙烯酸酯)呈嵌段状无序地分布在聚丙烯酰胺主链上. 这类聚合物很容易和表面活性剂相互作用, 通过疏水缔合, 形成混合胶束状聚集体, 导致溶液粘度剧增. 随聚合物溶液中SDS的加入, 溶液粘度发生大幅度起伏变化, 出现最大值. 粘度最大值对应的表面活性剂浓度c_S,max位于表面活性剂CMC附近, 并发现它的位置不随聚合物微结构而变化. 然而它们缔合作用的增粘程度却与聚合物疏水体含量X_H及疏水嵌段尺寸N_H有关. 在实验浓度范围内, X_H和N_H愈大, 溶液的粘度越高. 此外用透射电镜直接观察到聚合物/表面活性剂体系中聚集体的交联结构形貌.     

苄泽类非离子表面活性剂与离子型表面活性剂复配性质研究

通过测定苄泽类非离子型表面活性剂Brij58、Brij76、Brij78与阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)、阴离子表面活性剂十二烷基硫酸钠(SDS)复配体系的表面张力,研究了复配体系的形成胶束能力、降低表面张力效率、降低表面张力能力3种增效作用,并结合复配体系中表面活性剂分子间的相互作用参数进行了深入的讨论。研究结果表明,与阳离子表面活性剂复配时,Brij76/CTAB体系增效作用最强;与阴离子表面活性剂复配时,Brij58/SDS复配体系增效作用最强,而且苄泽类非离子型表面活性剂与阴离子表面活性剂复配增效作用更加显著。     

表面活性剂对海藻酸钠稀水溶液剪切粘度的影响

通过粘度法考察了不同pH值时, 阴离子聚电解质海藻酸钠(NaAlg)与阴离子表面活性剂十二烷基硫酸钠(SDS)、阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)、非离子表面活性剂辛基酚聚氧乙烯醚(TritonX-100)以及它们的复配体系的相互作用. 研究表明, 在酸性条件下, SDS和TritonX-100与NaAlg之间主要是疏水作用, 随着表面活性剂浓度的增加, 体系粘度下降直到基本不变, CTAB与NaAlg主要发生静电作用和疏水作用, 体系粘度随CTAB浓度的增加呈现先上升后下降的趋势. 在实验条件下, TritonX-100浓度为0.05 mmol·L-1时, SDS的加入, 使得NaAlg/TritonX-100体系的零剪切粘度下降, 而CTAB的加入, 在pH=3.0和5.0时, NaAlg/TritonX-100体系的零剪切粘度出现上升, 在pH=6.4时, 该体系零剪切粘度下降.     

疏水缔合共聚物与表面活性剂的界面相互作用

采用界面张力弛豫法研究了疏水缔合聚合物聚丙烯酰胺/2-乙基己基丙烯酸酯[P(AM/2-EHA)]在正辛烷-水界面上的扩张粘弹性质, 考察了不同类型表面活性剂十二烷基硫酸钠(SDS)、聚环氧乙烯醚(Tx-100)和十六烷基三甲基溴化铵(CTAB)对其界面扩张性质的影响. 研究发现, 界面上的表面活性剂分子可以与聚合物的疏水嵌段形成类似混合胶束的聚集体, 表面活性剂分子与聚集体之间存在快速交换. 这种弛豫过程的特征时间远比分子在体相与界面间的扩散交换时短. 当界面面积增大时, 上述混合胶束中的表面活性剂分子能快速释放, 在界面层内原位快速消除界面张力梯度, 从而大大降低界面扩张弹性. 界面上的CTAB分子与聚合物链节上的负电中心通过较强的电荷吸引作用形成复合物. 当界面面积增大时, 上述混合胶束中的CTAB分子释放较慢, 界面张力梯度较大. 非离子表面活性剂Tx-100分子量较大, 扩散速率较慢, 它在界面上与聚集体间的交换比阴离子表面活性剂SDS慢, 其特征时间约为0.9 s.     

表面活性剂在水-有机两相体系中对β-葡萄糖苷酶催化合成红景天苷的影响

采用缓冲液/正己烷为反应体系,比较了几类表面活性剂(CTAB,SDS,SDBS,Tween 20)对酶活的影响.并在该反应体系中,考察了表面活性剂对β-葡萄糖苷酶催化合成红景天苷的反应中底物转化率以及初始反应速率的影响,确定了反应混合体系的适宜含水量.结果表明,在水/有机两相体系中,HLB值较高的SDS对酶的失活体现出了一定的抑制作用,其余表面活性剂均对酶失活起了不同程度的加速作用.在几类表面活性剂各自最适添加浓度下,CTAB,SDS,Tween 20三组均将底物转化率从9.2%提高到11%左右.不添加表面活性剂所测得的初始反应速率最高,Tween 20组次之,离子型表面活性剂添加组最低.对于SDS添加组,当其含水量为10%时,底物转化率可以达到22.3%.     

十四烷基三甲基氯化铵/十二烷基苯磺酸钠混合表面活性剂双水相体系的萃取性能

研究了十四烷基三甲基氯化铵(TTAC)与十二烷基苯磺酸钠(SDBS)混合表面活性剂水溶液双水相体系的分相情况、萃取性能及两相的微观结构.结果表明,TTAC/SDBS混合表面活性剂水溶液在30℃下能够形成稳定的双水相体系;该双水相体系对亚甲基蓝、靛红都具有一定的萃取分离作用.其上、下两相的微观结构明显不同,这是其能够形成稳定双水相体系且具有萃取作用的重要原因.     

正、负离子表面活性剂混合体系溶致液晶生成的相行为

研究了烷基(C8,C12,C14)三甲基溴化铵、烷基(C12,C14)溴化吡啶与烷基(C8,C12)硫酸钠混合体系溶致液晶形成的条件与结构的变化.在高浓度的水溶液中,随着正、负离子表面活性剂摩尔比接近于1,液晶结构由六角相过渡为层状相.表面活性剂非极性链长改变,对相行为影响显著,短碳链的正、负离子表面活性剂混合体系,在等摩尔比时,体系为层状液晶或立方液晶为主,夹杂少许沉淀.随碳链增长,两类表面活性剂间的静电吸引效果表现为生成沉淀的摩尔比例范围变宽,沉淀量增多,共存的液晶相减少,甚至消失.若只改变正离子的极性头基,季胺盐比吡啶盐与烷基硫酸盐的作用要强,形成不溶物的混合摩尔比例范围更宽.     

十二烷基苯磺酸钠在联苯类分子液晶传感器中传感过程的分子动力学模拟

本文采用分子动力学模拟,通过建立了液晶5CB/真空,液晶5CB/水,表面活性剂SDS/水溶液和液晶5CB/SDS水溶液界面来研究基于竞争包合的液晶传感器中传感分子的工作原理。研究表明,5CB液晶在真空下会自发的变为一维有序的排列,当和水作用时液晶分子5CB取向为趋于与液体表面水平,当与表面包含SDS的溶液相互作用时分子取向为垂直液面。本动力学模拟反映了以SDS作为探针分子的竞争包合类液晶传感器中的传感过程。     

辛基三甲基溴化铵与辛基硫酸钠混合水溶液的相行为

对辛基三甲基溴化铵(OTAB)与辛基硫酸钠(SOS)正、负离子混合表面活性剂水溶液的相行为进行了研究.在高浓度的溶液中,混合表面活性剂形成液晶相,随着混合摩尔比OTAB/SOS接近于1,液晶结构由六角相转层状相,同时夹杂少量沉淀物;在中等浓度时,任意混合摩尔比例下皆为均相透明溶液;在低浓度下,在很宽的OTAB/SOS混合摩尔比的范围,出现双水相,其中的表面活性剂稀薄相,为不同大小的胶团与囊泡组成的稀溶液,另一表面活性剂富集相中则为数密度很大的囊泡聚集体,富集相对油溶性染料的增溶作用比非富集相高得多.     

C_（12）C_6C_（12）Br_2/C_（12）E_（10）混合表面活性剂与DNA之间的相互作用

本文以构建有效的非病毒基因载体为目的,研究了C12C6C12Br2/C12E10混合表面活性剂组成对其与DNA之间相互作用的影响,并对混合表面活性剂与DNA形成的聚集体结构和形貌进行了表征。结果表明,当固定混合表面活性剂的总浓度为1.0 mmol/L时,混合表面活性剂组成的改变会引起混合体系浊度、聚集体表面电荷和聚集体...     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Simultaneous propane dehydrogenation andco2hydrogenation overCrOx/SiO2catalyst

Summary Single reverse water-gas shift (RWGS) and dehydrogenation of propane with CO₂(DH-CO₂) reactions in the presence and absence of the CrO_x/SiO₂ catalyst have been studied between 673 and 873 K. It was found that the CrO_x/SiO₂ catalyst is active both in the dehydrogenation of propane and in the RWGS reactions. The obtained results suggest that the dehydrogenation of propane to propene in the presence of CO₂on CrO_x/SiO₂can be facilitated by the RWGS reaction.</o:p>     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

An investigation of the promotional effect of propylene or propane traces on the activity of sulfatedPt/g-Al2O3andPt-Sn/g-Al2O3inCH4combustion

Summary A strong promoting effect of the presence of C₃H₈or C₃H₆was determined for the combustion of CH₄in excess oxygen, over pre-sulfated 1%Pt/g-Al₂O₃and pre-sulfated 1%Pt-2%Sn/g-Al₂O₃catalysts.</o:p>     

LixZryOz三元化合物的制备及表征

采用高温固相法制备了4种高纯度晶相组成的LixZryOz三元化合物,研究了焙烧温度、时间、反应物的种类和初始反应物物质的量比对产物组成的影响,进一步用XRD、SEM及BET分析方法对产物的晶相结构、表面形貌及比表面积进行了表征.实验结果表明,Li2CO3与ZrO2在适当条件下可以合成得到单斜相Li3ZrO3;以LiOH替代Li2CO3,在适当条件下可以分别合成得到四方相Li2ZrO3和三斜/单斜相Li6Zr2O7;进一步以Zr(NO3)4·5H2O代替Zr02,可将单斜相Li6Zr2O7的制备时间由96 h缩短至24 h.SEM照片显示产物硬团聚明显,粒径分布在1～10μm间,BET分析表明样品比表面积处于1.0～9.0 m2·g-1间分布,反应过程中锂的过量以及长时间高温焙烧是引起产物粒径长大和产生硬团聚的主要原因.     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.