Spectral Parameters of Nd^3＋ Ion in Nd^3＋：NaGd（MoO4）2 Crystal

1 INTRODUCTION Since the diode-laser pumped solid-state lasers were found in a wide variety of applications in the fields of military, industry, medical treatment and scientific researches due to the advantages of high stability, compactness, high efficiency and long life- time, the research on more efficient new materials with improved spectral properties for diode pumping has become more important. Molybdate crystals with general formula M’Re(MoO4)2 (M’ = Li, Na, K) have been repor…     

Carbon nanotubes decorated α-Al2O3 containing cobalt nanoparticles for Fischer-Tropsch reaction

A new hierarchical composite consisted of multi-walled carbon nanotubes (CNTs) layer anchored on macroscopic α-Al2O3 host matrix was synthesized and used as support for Fischer-Tropsch synthesis (FTS). The composite constituted by a thin shell of a homogeneous, highly entangled and structure-opened carbon nanotubes network and it exhibited a relatively high and fully accessible specific surface area of 76 m 2 g-1 , compared with that of 5 m 2 g-1 of the original α-Al2O3 support. The metal-support interaction between carbon nanotubes surface and cobalt precursor and high effective surface area led to a relatively high dispersion of cobalt nanoparticles. This hierarchically supported cobalt catalyst exhibited a high FTS activity along with an extremely high selectivity towards liquid hydrocarbons compared with the cobalt-based catalyst supported on pristine α-Al2O3 or on CNTs carriers. This improvement can attribute to the high accessibility of composite surface area comparing with the macroscopic host structure alone or to the bulk CNTs where the nanoscopic dimension induced a dense packing with low mass transfer which favoured the problem of reactants competitive diffusion towards the cobalt active site. In addition, intrinsic thermal conductivity of decorated CNTs could help the heat dissipating throughout the catalyst body, thus avoiding the formation of local hot spots which appeared in high CO conversion under pure syngas feed in FTS reaction. Cobalt supported on CNTs decorated α-Al2O3 catalyst also exhibited satisfied high stability during more than 200 h on stream under relatively severe conditions compared with other catalysts reported in the literature. Finally, the macroscopic shape of such composite easily rendered its usage as catalyst support in a fixed-bed configuration without facing problems of transport and pressure drop as encountered with the bulk CNTs.     

A New Method of Measurement for Elastic Wave Velocities in Minerals and Rocks at High Temperature and High Pressure and Its Significance

We developed a new method of measurement for elastic wave velocity of rocks and minerals at high temperature and high pressure in a wedge-type cubic anvil. The shear-wave and other ultrasonic wave can be identified by full wave phase analysis (FWPA), thus the velocities of compression-wave and shear-wave can be obtained in a single experiment. We have done the measurements of elastic wave velocities on pyrophyllite, etc. at high pressure (0.1—5.5 GPa) and high temperature (ambient temperature 1600℃), the ranges of the pressure and the temperature are in the head among the methods of the wave velocites measurement in laboratory in the world.     

Solvent-switchable Acetalization by Yb（OTf）3-Catalyzed Procedures

O,O＇Diethyl acetals were prepared in high yields under mild conditions via the reaction of triethyl orthoformate with aldehydes and ketones in absolute ethanol in the presence of as low as 0.1 tool% of Yb（OTf）3. Using the same catalyst in THF-H2O, these O,O＇-diethyl acetals could be converted to the corresponding carbonyl compounds efficiently. This new protection-deprotection protocol presents the advantages of ease of execution, high efficiency and good chemoselectivity.     

Microfluidic Device： A Miniaturized Platform for Chemical Reactions

Microfluidic devices, as a new miniaturized platform stemming from the field of micro-electromechanical sys-tems, have been used in many disciplines. In the field of chemical reactions, microfluidic device-based microreac-tors have shown great promise in building new chemical technologies and processes with increased speed and reli- ability and reduced sample consumption and cost. This technology has also become a new and effective tool for precise, high-throughput, and automatic analysis of chemical synthesis processes. Compared with conventional chemical laboratory batch methodologies, microfluidic reactors have a number of features, such as high mixing ef- ficiency, short reaction time, high heat-transfer coefficient, small reactant volume, controllable residence time, and high surface-to-volume ratio, among others. Combined with recent advances in microfluidic devices for chemical reactions, this review aims to give an overview of the features and applications of microfluidic devices in the field of chemical synthesis. It also aims to stimulate the development of microfluidic device applications in the field of chemical reactions.     

A small sample-size automated adiabatic calorimeter from 70 to 580 K——Molar heat capacities of α-Al_2O_3

An automatic adiabatic calorimeter for measuring heat capacities in the temperature range 70—580 K, equipped with a small sample cell of 7.4 cm~3 in the internal volume has been developed. In order to obtain a good adiabatic condition of the calorimeter at high temperature, the calorimeter was surrounded in sequence by two adiabatic shields, three radiation shields and an auxiliary temperature-controlled sheath. The main body of the cell made of copper and the lid made of brass are silver-soldered and the cell is sealed with a copper screw cap. A sealing gasket made of Pb-Sn alloy is put between the cap and the lid to ensure a high vacuum sealing of the cell in the whole experimental temperature range. All the leads are insulated and fixed with W30-11 varnish, thus a good electric insulation is obtained at high temperature. All the experimental data, including those for energy and temperature are collected and processed automatically with a personal computer using a predetermined program. To verify the     

Design and performance of air flow-assisted ionization imaging mass spectrometry system

The imaging mass spectrometry（IMS） technology has experienced a rapid development in recent years.A new IMS technology which is based on air flow assisted ionization（AFAI） was reported.It allows for the convenient pretreatment of the samples and can image a large area of sample in a single measurement with high sensitivity.The AFAI in DESI mode was used as the ion source in this paper.The new IMS method is named AFADESI-IMS.The adoption of assisted air flow makes the sample pretreatment easy and convenient.An optimization of the distance between the ion transport tube and MS orifice increases the sensitivity of the system.For data processing,a program based on MATLAB with the function of numerical analysis was developed.A theoretical imaging resolution of a few hundred microns can be achieved.The composite AFAI-IMS images of different target analytes were imaged with high sensitivity.A typical AFAI-IMS image of the whole-body section of a rat was obtained in a single analytical measurement.The ability to image a large area for relevant samples in a single measurement with high sensitivity and repeatability is a significant advantage.The method has enormous potentials in the MS imaging of large and complicated samples.     

Clean Synthesis in Water：Darzens Condensation Reaction of Aromatic Aldehydes with Phenacyl Chloride

The Darzens condensation reaction of aromatic aldehydes with phenacyl chloride proceeded very efficiently in a water suspension medium in the presence of triethylbenzylammonium chloride and only trans-2,3-epoxy-1,3-diaryl-1-propanones were formed which can be isolated simply by filtration.The structures of these compounds were confirmed by elemental analysis,IR and ^1H NMR spectra.Therir configurations are in agreement with that of the same compounds reported in the literature.Compared to the classical Darzens condensation,this new method has the advantages of good yields,high stereoselectivity,low running cost inexpensive and environmentally benign procedure.     

STUDIES ON RAPID METHOD OF CULTURING POTENT MICROBIAL STRAINS

In this paper we use a new inducing method by applying the powerful and penetra-tire fast neutron and Co~(60)-γ rays on single colonies of just developed aerial hyphae from whichwe have obtained a high percentage of mutant strains. At the same time, the stimulativezone is used as the hormone screening index so that the breeding rate has been greatly acceler-ated. It has been proved in our research that this new method has many merits. It is easy toapply and to obtain a high ratio of mutants. Hence it is really a fast and effective in-ducing technique. The successful breeding of Streptomyces jingyangensis sp. nov., a highlyeffective stra.in "5406", provides us with its studies and utilization.     

THE METHOD OF LASER LIGHT SCATTERING ON NETWORK COPOLYMERIZATIONS

Laser light scattering method introduced in this paper is a new method to study macromolecular gelation.The most prominent features of the methods are its high sensitivity and use of the scanning technique, whereupon the parameters describing the properties of reaction process at a macro level can be obtained. They are the speed and the point of gelation and the point of phase separation. The parameters describing the inhomogeneous changes in reaction systems at a sub-micro level can also be obtained. They include a (the correlation coefficient) and (the mean squared dilectric constant fluctuation). Thus, the tracks describing the inhomogeneous changes in reaction systems can be traced. The method presented here will provide a new approach to decpening understanding of the gelation process.     

Triptycene-derived heterocalixarene: A new type of macrocycle-based stationary phases for gas chromatography

This work reports the investigation of a new triptycene-derived oxacalixarene(TDOC) as the stationary phase for gas chromatography(GC) with high-resolution performance for a wide range of analytes and isomers.The TDOC scaffold is composed of triptycene and 1,8-naphthyridine moieties,inherently differing from the conventional calixarenes in structures and properties.As a result,the TDOC column exhibited outstanding column efficiency of 5679 plates/m by n-dodecane at 120℃.It showed advantageous performance for separations of the mixtures with various analytes and achieved high resolution of diverse isomers(skeletal,positional and cis-/trans-isomers) from apolar to polar nature.Moreover,the TDOC column exhibited high thermal stability up to 310℃.To date,the TDOC-based materials have not been reported in chromatography.This work demonstrates the good potential of the triptycene-derived heterocalixarenes as a new class of stationary phases for chromatographic analyses.     

水溶性3H-吲哚菁型生物荧光标示染料的研究

With the development of life science, there is a growing requirement for high sensitive detection technologies in analysis. Fluorescence label is a convenient method. Indocyanines with larger extinction coefficients (105L/mol· cm), good fluorescent properties and fluorescence enhancement combining with biomass have been used as a new generation of fluorescent label compounds in biological analysis. However, photostability of these dyes has been a problem. In this paper the substituents on the nitrogen atoms in the heterocyclic rings of these indocyanines were designed as p-carboxybenzyl groups, and series novel straight chain polymethine indocyanines were synthesized. Introduction of rigid rings into the methine chain resulted in other series novel 3H-indocyanines.     

无气味、实用的缩硫醛/酮化反应试剂：2-（1，3-二噻-2-亚基）-3-羰基丁酸甲酯

a-Oxo ketene dithioacetals, methyl 2-（1,3-dithian/dithiolan-2-ylidene）-3-oxobutanoate （2a/2b） prepared in nearly quantitative yields simply from methyl acetylacetate, carbon disulfide and 1,3-dibromopropane/1,2-dibromoethane in the presence of potassium carbonate, were investigated in the thioacetalization with various carbonyl compounds 3. It has been demonstrated that methyl 2-（1,3-dithian-2-ylidene）-3-oxobutanoate （2a） could act as a nonthiolic, odorless and practical thioacetalization reagent. A range of aldehydes and ketones 3 were converted into the corresponding dithioacetals 4 in high yields （up to 91%） in the presence of 2a. Moreover, 2a showed high chemoselectivity between aldehyde and ketone in thioacetalization.     

Recent Progress in Low Temperature Calorimetry

The paper gives a review on recent progress on new methods, instrumental innovations and new trends in low temperature calorimetry as reported in the last five years in the literature. The paper refers to establishing strictly adiabatic conditions, improved analysis of quasi-adiabatic experiments, high resolution adiabatic and isoperibol scanning calorimeters and microcalorimeters for the study of μ-samples. This revised version was published online in August 2006 with corrections to the Cover Date.     

MULTIPLE EQUILIBRIA IN BAROCLINIC ATMOSPHERE BY THERMAL FORCING RELATED TO SUBTROPICAL HIGH

By using Lorenz's moist general circulation model, a nonlinear and dissipative system describing atmospheric motion has been obtained in approximation of Low Order.The multiple equilibria and the transformation between the flow patterns of winter and summer, the latitudinal oscillation of subtropical high by thermal forcing and nonlinear interaction of general circulation are studied in this paper.The results show that the transformation of flow patterns is a discontinuous leaping, and is a process of resetting new flow pattern by rapid exchange inflow field.In the corresponding dry model, we cannot find the latitudinal oscillation of the center of subtropical high.In the moist model, after the thermal effect of water vapor is drawn into the model, nonlinear interaction appears between flow and heating fields.This effect helps to bring about the latitudinal oscillation of subtropical high.     

Tin(II) Chloride Dihydrate Catalyzed Groebke Condensation: An Efficient Protocol for the Synthesis of 3-Aminoimidazo[1,2-a]pyridines

The ability of tin(II) chloride dihydrate as a catalyst to promote the three-component condensation reaction from a diversity of aromatic aldehydes, 2-aminopyridines and isonitriles at room temperature is described. This methodology affords a number of 3-aminoimidazo[1,2-a]pyridines in the presence of tin(II) chloride dihydrate as a new and mild Lewis acid catalyst in the multi-component reaction in reasonable yields and short reaction time without any significant optimization of the reaction conditions.     

Are Solid Catalysts Successfully Emulating Enzymes?

 In many aspects, similitude exists between man-made catalysts and enzymes. Can scientific insight into this similitude stimulate new research directions in catalysis? More precisely, can the understanding of the mechanisms of activity control in enzymes suggest new advances for man-made catalysts? Indeed, it is already possible to design catalysts with (i) new structures (e.g. presence of several phases) and (ii) a better balance between the roles of the different components. The ambition is to keep the essential advantages of solids as catalysts, in particular robustness, easy separation from products, and tolerance to high temperatures, while adding the advantages typical of enzymes, like more activity, allostery, and more precise control of selectivity, in particular enantioselectivity. The ambition is to build a bridge between robust man-made functional solids and fragile but extremely selective enzymes. For that, results from a line of the work in our group will be used.     

High and ultra-stable energy storage from all-carbon sodium-ion capacitor with 3D framework carbon as cathode and carbon nanosheet as anode

Sodium-ion capacitors(SICs)are extremely promising due to the combined merits of high energy-power characteristics and considerable price advantage.However,it is still difficult to achieve high energypower outputs and cycle stability in a typical configuration of the metal-based battery-type anode and activated carbon capacitor-type cathode due to the kinetic mismatching.In this work,a carbon nanosheet(PSCS-600)with large interlayer spacing of 0.41 nm derived from the bio-waste pine cone shell was prepared.Besides,the covalent triazine framework derived carbon(OPDN-CTF-A)was obtained through ionothermal synthesis strategy,exhibiting beneficial hierarchical pores(0.5-6 nm)and high heteroatoms(5.6 at%N,6.6 at%O).On this basis,the all-carbon SICs were fabricated by the integration of PSCS-600 anode and OPDN-CTF-A cathode.The device delivered high energy density 111 Wh kg^-1,high power output of 14,200 W kg^-1 and ultra-stable cycling life(~90.7%capacitance retention after 10,000 cycles).This work provides new ideas in fabricating carbon-carbon architectural SICs with high energy storage for practical application.     

A convenient one-pot synthesis of new chromeno[3,4-c]chromene and chromeno[3,4-c]pyridine derivatives in the presence of high surface area of magnesium oxide

In this investigation a new strategy involves the one-pot,three-component reaction of malononitrile,salycilaldehyde and phenol derivatives in the presence of high surface area of MgO is extended to the formation of chromeno[3,4-c]chromene derivatives in good to excellent yields in a short reaction time.Also,the three component reactions of an aldehyde such as salycilaldehyde and ketones with malononitril for the formation of chromeno[3,4-c]pyridines are investigated.     

A Novel Synthesis of Difloxacin Hydrochloride

Difloxacin, the third generation of new quinolone antibiotics, has broad-spectrum in vitro activity and excellent potency in vivo and has been found to be against gram-positive cocci, gram-negative bacteria, anaerobe, mycoplasm, chlamydia1,2. As described previously, high reaction temperature and hazardous reagents are the defects of the methods for preparation of difloxacin3,4. We have developed a new synthetic method as shown in the Scheme. 2,4-Dichloro-5-fluoro-acetophenone 1 was used as …