Protonation of leucoemeraldine in the solid state and in solution

The protonation of leucoemeraldine in power form and in N-methylpyrrolidinone (NMP) solution by HCIO₄ and HBF₄ has been studied by x-ray photoelectron spectroscopy (XPS), infrared (IR), and ultraviolet (UV)-visible absorption spectroscopy. In powder form, less than 25% of the amine nitrogens can be protonated in the absence of oxygen. The effects of oxygen on the degree of protonation and the distribution of amine and imine units upon deprotonation of the salt are investigated. The degree of protonation in leuccemeraldine can be increased to about 50% with 3 M HCIO₄, similar to that achievable with emeraldine base in powder form. In NMP solution, leucoemeraldine is easily oxidized by dissolved oxygen. Protonation of both leucoemeraldine and emeraldine base in NMP solutions results in metastable species which gradually undergo deprotonation. The resulting products are affected by the O₂ content of the solutions. © 1993 John Wiley & Sons, Inc.     

Spectroscopic studies of the effects of salt addition in the protonation and deprotonation of emeraldine films

Emeraldine base films were treated with HClO₄ solutions of various concentrations, with and without the addition of NaClO₄. The protonation of the films was studied using angle-resolved x-ray photoelectron spectroscopy (XPS), Fourier transform infra-red (FTIR) absorption spectroscopy, and ultraviolet (UV)-visible absorption spectroscopy. The protonation level can be substantially increased by the presence of salt if sufficient time is allowed for the anions to migrate into the bulk of the film. Conversely, in the partial deprotonation of emeraldine salt films, a higher retention of anions is observed in the presence of salt, even though the effect is not as pronounced as in the protonation process. © 1995 John Wiley & Sons, Inc.     

Variation in coordinative property of two different N<Subscript>2</Subscript>O<Subscript>2</Subscript> donor Schiff base ligands with nickel(II) and cobalt(III) ions: characterisation and single crystal structure elucidation

A nickel(II) and a cobalt(III) complex of two different potentially tetradentate Schiff bases with different binding modes have been synthesised. The nickel(II) complex [NiL¹] · CH₃OH (1) was formed, on reacting the metal salt with a perfectly symmetrical N₂O₂ tetradentate Schiff base ligand H ₂ L ¹ , which is the 1:2 condensation product of 1,3-diamino propane and 2-hydroxyacetophenone. The cobalt(III) complex [Co(HL²)₃] · (ClO₄)₃ · H₂O (2) was synthesised using an asymmetric N₂O₂ tetradentate Schiff base ligand HL ² on condensing N,N-dimethyl-1,3-diamino propane with o-vanillin in 1:1 mmol ratio. Although both Schiff bases are N₂O₂ functionalised, they showed variation in their coordinative property with nickel(II) and cobalt(III) ions. Both the complexes were characterised by IR spectroscopy and cyclic voltammetry and their single crystal structures clearly indicate that 1 is a mononuclear species whereas 2 is a hydrogen-bonded dimer.     

The N‐Methylpyrrolidone (NMP) Effect in Iron‐Catalyzed Cross‐Coupling with Simple Ferric Salts and MeMgBr

The use of N‐methylpyrrolidone (NMP) as a co‐solvent in ferric salt catalyzed cross‐coupling reactions is crucial for achieving the highly selective, preparative scale formation of cross‐coupled product in reactions utilizing alkyl Grignard reagents. Despite the critical importance of NMP, the molecular level effect of NMP on in situ formed and reactive iron species that enables effective catalysis remains undefined. Herein, we report the isolation and characterization of a novel trimethyliron(II) ferrate species, [Mg(NMP)₆][FeMe₃]₂ ( 1 ), which forms as the major iron species in situ in reactions of Fe(acac)₃ and MeMgBr under catalytically relevant conditions where NMP is employed as a co‐solvent. Importantly, combined GC analysis and ⁵⁷Fe Mössbauer spectroscopic studies identified 1 as a highly reactive iron species for the selective formation generating cross‐coupled product. These studies demonstrate that NMP does not directly interact with iron as a ligand in catalysis but, alternatively, interacts with the magnesium cations to preferentially stabilize the formation of 1 over [Fe₈Me₁₂]^? cluster generation, which occurs in the absence of NMP.     

Density functional study of protonation sites of α‐Keggin isopolyanions

Density functional theory (DFT) calculations were carried out to characterize the optimal site of the protons and the precise protonation state in the polyoxometalate (POM) anions [V₁₃O₄₀]^15? and [H₁₂V₁₃O₄₀]^3?. Six kinds of possible protonated stable isomers with the whole Keggin anion units are discussed. The calculations reveal that the preferred protonation site corresponds to bridging oxygens that belong to the same trimetallic group (isomers B and C). Both isomers B and C are comparatively stable in the gas phase, but only isomer B could exist stably in aqueous solution because of being stabilized by the electrostatic interaction. The solvent effects and protonation are also discussed. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Synthesis,Crystal Structure and Properties of Novel Composite Complex: [La(Nmp)4(H2o)4][HsiMo12O40]·2nmp·H2o

A new composite complex of [La(NMP)₄(H₂O)₄][HSiMo₁₂O₄₀]·2NMP·H₂O (NMP = N-methyl-2- pyrrolidone) was synthesized and characterized by IR, UV, ESR, TG-DTA and single crystal structural analysis. The water and organic ligands (NMP) coordinate directly with La(III) to form a dodecahedral complex and the SiMo₁₂O^4? ₄₀ anion is the counter ion. IR and X-ray analysis show that there is strong interaction between the polyoxometalate and organic donors. The complex is strongly photosensitive under irradiation with sunlight, resulting in a charge-transfer complex by oxidation of the N-methyl-2-pyrrolidone and reduction of the polyoxometalate. Low temperature ESR spectra indicate thermal electron delocalization among the Mo atoms in the title compound.     

Solution and solid state studies with the bis-oxalato building block [Cr(pyim)(C2O4)2]− [pyim = 2-(2′-pyridyl)imidazole]

The preparation, X-ray structure, and variable temperature magnetic study of the new compound {Ba(H₂O)_3/2[Cr(pyim)(C₂O₄)₂]₂}_n·9/2nH₂O (1) [pyim = 2-(2′-pyridyl)imidazole and C₂O₄^2? = dianion of oxalic acid], together with the potentiometric and spectrophotometric studies of the protonation/deprotonation equilibria of the pyim ligand and the ternary complex [Cr(pyim)(C₂O₄)₂]^?, are reported herein. The crystal structure of 1 consists of neutral chains, with diamond-shaped units sharing barium(II), with the two other corners occupied by chromium(III). The two metal centers are connected through bis(bidentate) oxalate. Very weak antiferromagnetic interactions between the chromium(III) ions occur in 1. The values of the protonation constants of the imidazole and pyridyl fragments of pyim as well as the acidity constant of the coordinated pyim in [Cr(pyim)(C₂O₄)₂]^? are determined for the first time by potentiometry and UV–Vis spectroscopy in aqueous solution (25?°C and 0.15 M NaNO₃ as ionic strength).     

Synthesis,crystal structure and characterization of a series of complexes constructed from coordinated Lanthanides(III) and the heteropolyanion [SiMo12O40]4−

The reaction of α-[SiMo₁₂O₄₀]^4? with trivalent cations Ln³⁺ and N-methyl-2-pyrrolidone leads to a series of complexes of formula [Ln(NMP)₄(H₂O) _n ]H[SiMo₁₂O₄₀]?·?2NMP?·?mH₂O [where Ln?=?La (1), Pr (2), Nd (3), Sm (4), Gd (5), n?=?4, Ln?=?Dy (6), Er (7), n?=?3. NMP?=?N-methyl-2-pyrrolidone]. The syntheses, X-ray crystal structures, IR, and ESR spectra and thermal properties of the complexes 1, 2, 4, 6, 7 have been reported previously. Here, we report X-ray crystal structures, IR, UV, ESR spectra and thermal properties of the complexes [Nd(NMP)₄(H₂O)₄]H[SiMo₁₂O₄₀]?·?2NMP?·?1.5H₂O (3), and [Gd(NMP)₄(H₂O)₄]H[SiMo₁₂O₄₀]?·?2NMP?·?H₂O (5). In addition, the electrochemical behaviour of this series of complexes in aqueous solution and aqueous-organic solution has been investigated and systematic comparisons have been made. All these complexes exhibit successive reduction process of the Mo atoms.     

Effect of reaction conditions on the molecular weight and polydispersity of linear poly(arylene ether phosphine oxide)s prepared from an AB monomer

A thorough study of the polymerization behavior of 4‐fluoro‐4′‐hydroxytriphenyl‐phosphine oxide, 2 , under nucleophilic aromatic substitution reactions has been carried out. The synthesis of 2 was achieved in excellent yields by the reaction of bis(4‐fluorophenyl)phenylphosphine oxide, 1 , with one equivalent of potassium hydroxide in DMSO/water. The structure and purity of 2 were confirmed via ¹H, ¹³C, and ³¹P NMR spectroscopy along with elemental analysis. Polymerization reactions of 2 in NMP or DMSO at 180 °C provided the corresponding linear poly(arylene ether phosphine oxide)s, PAEPOs, with number average molecular weights, M_n, ranging from 11,700 to 36,500 Da. All of the polymer samples were completely soluble in chloroform, tetrahydrofuran, DMSO, NMP, and DMAc. The polymerization reactions were accompanied by a competing intramolecular process that resulted in the formation of cyclic oligomeric species that were removed via a final precipitation from methanol. Analysis using ³¹P NMR spectroscopy and size exclusion chromatography (SEC) confirmed that the majority of the lower molecular weight cyclic species were removed via this process. The polymer samples formed tough films when chloroform solutions were slowly evaporated on a glass slide. The PAEPO samples prepared in this study exhibited excellent thermal stability with T_d (5%) values between 503 and 542 in air while the glass transition temperatures ranged from 223 to 237 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2099–2106, 2006     

Photooxidation of Selected Polycyclic Aromatic Hydrocarbons in Aqueous Organic Media in The Presence of Ti(IV)Oxide

Abstract

We have studied the photooxidation of selected polycyclic aromatic hydrocarbons (PAH) in the presence of Ti(IV)oxide in a mixed solvent system consisting of N-methylpyrrolidinone (NMP) and water. Reaction rates for the photooxidation of acenaphthylene and pyrene were investigated by monitoring the disappearance of the PAH substrate from the reaction mixture as a function of time. For both compounds plots of In C_o/C_t, as a function of time yielded straight lines, indicating first order kinetics with respect to the substrate. With an initial acenaphthylene concentration of 1.0 gL^?1 the first order reaction rate constant was 0.19 hr^?1 and the half life was 3.7 hr. With an initial pyrene concentration of 0.2 gL^?1 the first order reaction rate constant was 0.0285 hr^?1 and the half life was 24 hr. The photoproducts were characterized by high performance liquid chromatography with diode-array detection (HPLC/DAD) and by liquid chromatography/atmospheric pressure chemical ionization mass spectrometry (APCI/LC-MS). Although a number of simple oxidation products were identified the bulk of the photoproducts consisted of the parent PAH substituted with one or more solvent (NMP) molecules. The product mixtures from the photooxidation of the non-mutagens acenaphthylene and pyrene were found to be also non-mutagenic in our Salmonella typhimurium forward mutation assay.     

Synthesis and physicochemical properties of fac-[Re(CO)3(κ2-N,N-dpkfah)Cl], dpkfah=di-2-pyridyl ketone 2-furoic acid hydrazone: the molecular structure of fac-[Re(CO)3(κ2-N,N-dpkfah)Cl] · acetone

Reaction between [Re(CO)₅Cl] and di-2-pyridyl ketone 2-furoic acid hydrazone (dpkfah) (1) in refluxing toluene gave fac-[Re(CO)₃(κ²-N,N-dpkfah)Cl] (2). Spectroscopic and electrochemical measurements disclosed sensitivity of 2 to its surroundings. ¹H-NMR measurements showed that the amide proton exchanged with solvent protons, and its chemical shift is solvent and temperature dependent, while the chemical shifts of aromatic protons are solvent and temperature independent. Electronic absorption spectra of 2 divulged two intra-ligand charge transfer transitions (ILCT) in protophilic solvents and a single ILCT transition in non-protophilic solvents. Optical measurements on protophilic solutions of 2 established an equilibrium between 2 and its conjugate base, fac-[Re(CO)₃(κ²-N,N-dpkfah-H)Cl]^? (3). Thermo-optical measurements confirmed that the interconversion between 2 and 3 and gave ΔG ^ø values of ?26.48 and 22.99?kJ?mol^?1, respectively, for the protonation of DMF and DMSO by 2. Optosensing measurements showed that [MCl₂] (M?=?Zn, Cd, or Hg) in concentrations as low as 1.00?×?10^?7?mol?L^?1 can be detected and determined using protophilic solutions of 2. Electrochemical measurements showed 2 to be more stable in CH₃CN than DMF. Single-crystal X-ray structural analysis on fac-[Re(CO)₃(κ²-N,N-dpkfah)Cl]?·?acetone (4) obtained from an acetone solution of 2 confirmed the solvent–complex interaction and revealed two symmetry-independent molecules in the asymmetric unit. The extended structure of 4 disclosed parallel stacks connected via a network of classic and non-classic hydrogen bonds.     

In plane and out of plane anisotropy in Langmuir-Blodgett films of discogenic molecules

Abstract

Langmuir-Blodgett films of a discotic mesogenic pyrylium tetrafluoroborate salt (1) have been investigated from the point of view of their in-plane anisotropy, i.e. considering the average molecular orientation with respect to the dipping direction. The molecules are found to stand on edge with their flat polycyclic core more or less perpendicular to the dipping direction. Mixing 1 with N(C₄H₉)₄ ⁺ TCNQ^? in the spreading solvent leads to a different behaviour of the monolayer at the air-water interface, involving the formation of the Pyrylium-TCNQ salt. In contrast to the films of pure 1, these films do not exhibit any in-plane anisotropy after deposition on a solid substrate. The temperature dependance of the molecular anisotropy of both films has also been investigated. The results are presented and discussed in the framework of their mesomorphic properties together with the influence of the anion associated with Pyrylium.     

Synthesis,crystal structure and properties of a neodymium(III) coordination polymer of 1D chain structure based on typical plenary Keggin cluster

A 1D zigzag chain compound, [{Nd(NMP)₆}(PMo₁₂O₄₀)] _n , has been synthesized by reaction of α-H₃PMo₁₂O₄₀?·?nH₂O, Nd₂O₃ and NMP (NMP?=?N-methyl-2-pyrrolidone) in acetonitrile–water mixture, and characterized by elemental analysis, IR and UV spectra, and X-ray single crystal structural analysis. The crystal structure indicates that the title compound forms a one-dimensional zigzag chain built from alternating polyanions and cationic units through Mo–O_t–Nd–O_t–Mo links. In the compound, Nd³⁺ are eight-coordinate with a bicapped trigonal prism geometry of oxygen atoms, from six NMP molecules and two adjacent polyanions, and two terminal oxygen atoms of the polyanions occupying the caps. The powder ESR spectrum at 110?K of the title compound after being exposed to sunshine shows the signal of Mo⁵⁺, g?=?1.96. The CV shows that the title compound undergoes five two-electron reversible reductions and that [PMo₁₂O₄₀]^3? are active centers for electrochemical redox in solutions; cations have a small effect on electrochemical redox.     

Light Emitting Diodes Prepared from Terbium‐Immobilized Polyurea Chelates

Abstract

This article describes the synthesis and application of poly(1,4‐phenylene‐2,6‐pyridylurea) (MCPU) as a charge transporting and rare earth metal chelating host matrix for organic light emitting diodes (OLEDs). The chelation between MCPU and Terbium (Tb³⁺) (the rare earth metal used in this study), is facile in nature and persists in thin films obtained by spin coating onto various substrates. Multiple polymer chelating moieties at each Tb ion site may derive from MCPU repeat units from a single polymer chain or two polymer chains, and their respective structures are proposed. The emissive properties of these films in the presence and absence of Terbium (Tb³⁺) were characterized by steady state UV‐VIS absorption spectroscopy and photoluminescence (PL) spectroscopy. The PL emission from Tb(MCPU) films indicate contribution from both the host MCPU and the Tb ions. The incorporation of these films in OLEDs employing different device architectures yields electroluminescence spectra, which show the characteristic emission of the Tb ions but no emission from the host polymer matrix. Although these devices are not optimized, they exhibit an order of magnitude higher external quantum efficiency as compared to that of conventional aluminum tris 8‐hydroxyquinoline (Alq₃) based OLEDs, at low current densities.     

Synthesis and crystal structure of 1D polyoxometalate-based composite compound, [{Gd(NMP)6}(PMo12O40)]n (NMP=N-methyl-2-pyrrolidone)

A novel compound, [{Gd(NMP)₆}(PMo₁₂O₄₀)]_n, has been synthesized and characterized by IR, and UV spectroscopy, and single crystal X-ray structural analysis. It forms an unprecedented one-dimensional zigzag chain built from alternating polyanions and cationic units through Mo-O_t-Gd-O_t-Mo links in the crystal. In the compound, Gd³⁺ is eight-coordinated with a bicapped trigonal prism geometry environment of oxygen atoms. The results of the single crystal X-ray diffraction analyses and IR are agreement and both show the metal cation units are coordinately bonded to the Keggin cluster. The UV spectrum of the title compound suggests that the compound is entirely dissociated in dilute solution.     

Effect of the Media on the Quantum Yield of Singlet Oxygen (O2(1Δg)) Production by 9H‐Fluoren‐9‐one: Solvents and Solvent Mixtures

We have investigated the effect of a series of 18 solvents and mixtures of solvents on the production of singlet molecular oxygen (O₂(¹Δ_g), denoted as ¹O₂) by 9H‐fluoren‐9‐one (FLU). The normalized empirical parameter E derived from E_T(30) has been chosen as a measure of solvent polarity using Reichardt's betaine dyes. Quantum yields of ¹O₂ production (Φ_Δ) decrease with increasing solvent polarity and protic character as a consequence of the decrease of the quantum yield of intersystem crossing (Φ_ISC). Values of Φ_Δ of unity have been found in alkanes. In nonprotic solvents of increasing polarity, Φ_ISC and, therefore, Φ_Δ decrease due to solvent‐induced changes in the energy levels of singlet and triplet excited states of FLU. This compound is a poor ¹O₂ sensitizer in protic solvents, because hydrogen bonding considerably increases the rate of internal conversion from the singlet excited state, thus diminishing Φ_Δ to values much lower than those in nonprotic solvents of similar polarity. In mixtures of cyclohexane and alcohols, preferential solvation of FLU by the protic solvent leads to a fast decrease of Φ_Δ upon addition of increasing amounts of the latter.     

ALKOXYPHOSPHONIUM SALT INTERMEDIATES IN THE THIONO-THIOLO REARRANGEMENT OF PHOSPHYLTHIONATES IN PROTIC ACID MEDIA

Abstract

The thiono-thiolo rearrangement reaction of phosphylthionates 1 catalyzed by protic acids proceeds with the formation of two types of intermediate alkoxyphosphonium salts 2 and 3. The first of these is formed by the protonation of the substrate 1 at the sulfur atom. Formation of 2 is evident from the changes in chemical shifts in ³¹P NMR spectroscopy of phosphylthionates upon their interaction with trifluoroacetic acid and also from the appearance of electrical conductivity in the solutions of substrates in TFA. The extent of protonation is consistent with the expected substituent effect on the basicity of thiophosphoryl sulfur. The second type of alkoxyphosphonium salt is formed by the alkylation of neutral esters with 2. The formation of 3 is observed in both ¹H and ³¹PNMR spectra. 3 were identified by their spectroscopic comparison with alkoyxphosphonium salts produced by alkylation of 1 with strong alkylation agents. The relative reactivity of a model alkoxyphosphonium salt towards a neutral ester and a phosphylthioate anion was investigated. In the absence of acid the rate of alkylation of the anion exceeds that of the alkylation of a neutral ester by three orders of magnitude. The protonation of phosphylthioate anion under acidic conditions results in a dramatic decrease in the rate of alkylation thereby leading to accumulation of 3 in the acidic reaction media.     

A novel hydrogen-bonded cyclic dibromide in an organic diammonium salt

The organic diammonium salt N,N′-dibenzyl-N,N,N′,N′-tetramethylethylenediammonium dibromide dihydrate, (dbtmen)Br₂.2H₂O (1), was prepared by the reaction of N,N,N′,N′-tetramethyl-ethylenediamine (tmen) with benzyl bromide.1 crystallizes in the triclinic space group with the following unit cell dimensions for C₂₀H₃₄Br₂N₂O₂ (M = 494.31):a = 8.6672(6) ?,b = 11.7046(8) ?,c = 11.7731(8) ?, α = 76.988(8)°, β = 88.978(8)°, γ= 76.198(8)γ,V= 1129.26(13) ?³, Z=2. Three components, namely the (dbtmen)²⁺ dication, two bromide anions and two crystal water molecules constitute the structural arrangement of1. H₂O molecules are linked to bromide anions via O-H...Br hydrogen bonding interactions resulting in the formation of a four-membered O₂Br₂ cyclic dibromide. The O₂Br₂ units and the dications are arranged as alternating layers extending in the crystallographicbc plane. The arrangement of anions and cations may be viewed as a typical lamellar structure. The crystal water molecules can be removed by heating 1 at 140°C and the anhydrous dibromide thus formed can be fully rehydrated as evidenced by IR spectra and X-ray powder patterns. Dedicated to Prof S Chandrasekaran on the occasion of his 60th birthday     

Synthesis and Cation-Binding Properties of (1→6)-2,5-Anhydro-D-glucitol with 3,4-Di-O-Pentyl and Decyl Groups by Cyclopolymerization of 1,2:5,6-Dianhydro-D-mannitols

Abstract

The cyclopolymerizations of 1,2:5,6-dianhydro-3,4-di-O-pentyl-D-mannitol (1b) and 1,2:5,6-dianhydro-3,4-di-O-decyl-D-mannitol (1c) were carried out using BF₃OEt₂ and t-BuOK. All the resulting polymers consisted of cyclic constitutional units, i.e., the extent of cyclization was 100%. The polymer structures for the polymerization with t-BuOK were (1→6)-2,5-anhydro-3,4-di-O-pentyl-D-glucitol (2b) and (1→6)-2,5-anhydro-3,4-di-O-decyl-D-glucitol (2c), whereas those with BF₃O-decyl₂ comprised 2,5-anhydro-D-glucitols as major units along with other cyclic ones. These polymers were soluble in n-hexane, CHCl₃, and THF, but insoluble in water, which differs from the amphiphilic solubility of (1→6)-2,5-anhydro-3,4-di-O-methyl-D-glucitol (2a). The cation-binding properties of 2b and 2c were examined using alkali-metal picrates in order to compare them with those of 2a. The extraction yields for each cation decreased in the order of 2c < 2b < 2a. Every polymer exhibited a similar cation-binding selectivity in the order Cs⁺ > Rb⁺ > K⁺ ? Na⁺ > Li⁺. The ratio of K⁺ and Na⁺, K⁺/Na⁺, was 4.6 for 2a, 5.1 for 2b, and 7.1 for 2c in the increasing order 2a < 2b > 2c.     

Cellobiose as a model compound for cellulose to study the interactions in cellulose/lithium chloride/<Emphasis Type="Italic">N</Emphasis>-methyl-2-pyrrolidone systems

To investigate the solvent/solute interactions that take place during the dissolution of cellulose, cellobiose was employed as a model of the longer-chain cellulose molecule in a dissolution study of the cellobiose/LiCl/N-methyl-2-pyrrolidone (NMP) system, conducted using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), ¹³C, ³⁵Cl, and ⁷Li NMR spectroscopy, and conductivity measurements. For the LiCl/NMP system, FTIR and ¹³C NMR analyses of the NMP carbonyl moiety showed a strong dependence on the LiCl concentration, which suggested an association between the Li⁺ cations and the carbonyl groups of NMP. As the cellobiose molecules are dissolved in the LiCl/NMP solvent, the Li⁺–Cl^? ion-pairs in LiCl/NMP are dissociated. Strong hydrogen bonds are then formed between the hydroxyl groups of cellobiose and the Cl^? anions, resulting in breakage of the intermolecular hydrogen bonds of cellobiose. Meanwhile, the Li⁺ cations are further associated with the extra free NMP molecules. However, the NMP molecules do not directly interact with the dissolved cellobiose. Based on these results, we propose that our study is conducive to a more in-depth comprehension of the dissolution mechanism of cellulose in LiCl/NMP.