镥配合物的绝热量热法测试和热力学函数

本文合成了Lu(NO3)3 (C2H5O2N)4·H2O,用红外和元素分析对其进行了表征.用高精度全自动绝热量热仪,测定了该配合物在80～ 382 K温区的热容,利用实验热容数据,根据热容与焓、熵的热力学关系,求出了配合物在85～ 350 K温区内每隔5K相对于298.15K的标准热力学函数[HT-H29815]和[ST-S29815].在80～350 K温度区间内,配合物的热容随温度升高而增大,没有相转移点和热力学吸收峰的出现,该配合物在此温度区间内是稳定存在的.     

稀土钬及铒钇丙氨酸配合物的量热与热分析研究

合成了两种固态稀土丙氨酸配合物[Ho2(Ala)4(H2O)8]Cl6和[ErY(Ala)4(H2O)8](ClO4)6 (Ala为丙氨酸),用量热和热分析方法研究了这两种配合物的热力学性质.用全自动高精密绝热量热计测定了在78～377 K温区内的低温热容.对于[Ho2(Ala)4(H2O)8]Cl6,在214～255 K温区内发现一固-固相变,其相变温度为235.09 K.对于[ErY(Ala)4(H2O)8](ClO4)6,在99～121 K温区内也发现一固-固相变,其相变温度为115.78 K. [Ho2(Ala)4(H2O)8]Cl6固-固相变焓为3.02 kJ• mol－1,相变熵为12.83 J•K－1•mol－1； [ErY(Ala)4(H2O)8](ClO4)6 固-固相变焓为1.96 kJ•mol－1,相变熵为16.90 J•K－1•mol－1.同时,用TG技术在40～800 ℃温区研究了两配合物的热稳定性.由TG/DTG曲线分析可知, [Ho2(Ala)4(H2O)8]Cl6从80 ℃到479 ℃热分解分两步完成, [ErY(Ala)4(H2O)8](ClO4)6从120 ℃到430 ℃热分解分三步完成.     

纳米三氧化二钴低温热容和热力学性质的研究

The isobaric molar heat capacities of nano Co₂O₃ were determined by an adiabatic calorimeter in the temper-ature range from 78 to 350K. No phase transition takes place in this temperature range. The relationship of C_p，m with respect to thermodynamic temperature T was established as C_p，m=-11.998X³-9.6431X²+63.478X+81.291(J·K^-1·mol^-1) ， where X=(T-201.903)/121.535， the correlation coefficient R₂=0.9996. Ac-cording to this relationship and the relationships between thermodynamic functions， the thermodynamic functions of nano Co₂O₃ relative to the standard temperature of 298.15K were derived based on the measured heat capacity data. The average grain size of the studied nano Co₂O₃ sample was determined to be 12nm by TEM.     

重铬酸钾晶体低温热容及热力学性质的研究

用精密自动绝热量热计测定了重铬酸钾晶体在100～390 K温区内的摩尔热容.实验结果表明在研究温度区间内重铬酸钾无相变和其它热反常现象发生,但其热容在不同的温度范围表现出不同的变化趋势.在100 K≤ T ≤ 275 K和350 K≤ T ≤390 K区间内,其热容随温度的升高明显增大,在275 K≤ T ≤350 K区间,其热容约为定值.将重铬酸钾摩尔热容实验值Cp,m(J•K－1•mol－1)拟合成温度T的多项式方程,在100 K≤ T ≤275 K,为Cp,m=0.0050T2－1.0320T＋125.22； 275 K≤ T ≤ 350 K,为Cp,m=209.37； 350 K≤ T ≤390 K,为Cp,m= 0.0266T2－18.823T＋3542.3.根据热力学函数关系式,从热容值计算出了298.15 K～ 400 K温区范围内每隔5 K的热力学函数值.     

Ho(NO3)3(C2H5O2N)4·H2O的低温热容和热力学函数

合成了稀土(钬, Ho)-氨基酸(甘氨酸, C₂H₅O₂N)二元配合物Ho(NO₃)₃(C₂H₅O₂N)₄·H₂O, 并且通过化学分析、元素分析和红外(IR)光谱对配合物进行了表征. 用高精度全自动绝热量热仪, 测定了该配合物在80-390 K温度区间的定压摩尔热容(C_p,m). 利用实验测定的热容数据, 采用最小二乘法, 将热容曲线上热容峰以外的两段平滑区的摩尔热容对折合温度进行拟合, 建立了热容随折合温度变化的多项式方程. 根据热容与焓、熵的热力学关系,计算出了配合物在80-390 K温度区间内,每隔5 K,相对于298.15 K的摩尔热力学函数(H_T,m-H_298.15,m)和(S_T,m-S_298.15,m). 通过热容曲线分析, 计算出了350 K附近转变过程的焓变(Δ_trsH_m)和熵变(Δ_trsS_m). 用差示扫描量热法(DSC)测定了配合物的热稳定性.     

次甲基硅SiH与H2X(X=O,S)反应的热力学及动力学性质研究

在量子化学对SiH与H₂O和H₂S反应计算的基础上,运用统计热力学和Wigner校正的Eyring过渡态理论,计算了上述两反应在200～2000 K温度范围内的热力学函数、平衡常数、频率因子A和速率常数随温度的变化。计算结果表明,两反应在低温下具有热力学优势,而在高温下具有动力学优势。比较两反应的计算结果发现,在相同的温度下,SiH与H₂O反应比SiH与H₂S反应放热较多,但速率常数却较小。SiH与H₂O反应和前文报道的SiH与HF反应的比较表明,SiH与H₂O反应放热较少,而且在相同温度下,速率常数也较小。     

M5(PO4)3F (M=Ca, Sr, Ba)中Sm3+的电荷迁移态及Sm3+和Eu3+的电荷迁移能量关系

采用高温固相反应合成了M_5-2xSm_xNa_x(PO₄)₃F(M=Ca,Sr,Ba)荧光体,研究了其在真空紫外-可见光范围的发光特性。发现在Ca₅(PO₄)₃F中Sm³⁺的电荷迁移带约在191 nm,在Sr₅(PO₄)₃F中约在199 nm,而在Ba₅(PO₄)₃F中约在204 nm,随着被取代碱土离子半径的增大电荷迁移能量逐渐减小。比较了M₅(PO₄)₃F (M=Ca,Sr,Ba)中Sm³⁺和Eu³⁺电荷迁移能量的关系。     

纳米铁的低温热容和热力学性质研究

用扫描电子显微镜(SEM)测定了纳米铁试样的粒径, SEM结果表明Fe试样平均粒径d为25 nm. 在84～350 K温区, 用精密低温绝热量热计测定了该纳米铁试样的等压摩尔热容, 拟合出其等压摩尔热容与热力学温度的函数关系式: Cp=36.831+14.772x−5.4968x2−0.7099x3−1.3188x4, 其中x=(T−234)/156. 根据热容与热力学函数关系, 计算了以298.15 K为基准的纳米Fe(d=25 nm)热力学函数, 并与文献报导的粗晶Fe及粒径87 nm Fe的热容进行了比较, 从能量角度分析了不同粒径Fe热容曲线差别产生的原因.     

酸蒸气水热前驱物热分解法制备立方ZrW2O8类型化合物

ZrW₂O₇(OH,Cl)₂·2H₂O and its isomorphs were prepared by Acidic Steam Hydrothermal (ASH) method and the pure cubic ZrW₂O₈ was synthesized by dehydration of ZrW₂O₇(OH,Cl)₂·2H₂O. The control factors of ASH method, such as the type, concentration and volume of the acidic steam source, temperature and time of the reaction, were studied in detail. The results showed that HCl was a better volatile acidic steam source and the concentration of HCl determined the product. At lower concentration of HCl, the main product was Na₂W₂O₇·H₂O rather than ZrW₂O₇(OH,Cl)₂·2H₂O. When the concentration was higher than 6 mol·L^-1, the products in turn became sodium tungstates with the structure types of pyrochlore, hexagonal tungsten bronze and finally were transformed to ZrW₂O₇(OH,Cl)₂·2H₂O precursors.     

2-氯-6-(三氯甲基)呲啶的低温热容及热力学函数

本文用绝热量热计测定了2-氯-6-(三氯甲基)吡啶在13—316K温区内的热容。没有发现该化合物在此温区内有相变或热异常现象。用有效频率分布法将实验热容值拟合成平滑曲线并外推至OK,得到13K以下的热容值。将本文数据与前文数据结合,导出了该化合物在0—400K温区内的标准热力学函数。当T=298.15K时,该化合物的C°_P(T),S°(T)—S°(0),[H°(T)—H°(0)]/T和—[G°(T)—H°(0)]/T分别为189.35,244.60,112.45和132.15 J K~(-1) mol~(-1)。     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.     

A hydrogen-1, nitrogen-15, and chlorine-35 NMR coordination study of Lu(ClO4)3 and Lu(NO3)3 in aqueous solvent mixtures

A coordination study of Lu(III) has been carried out for the nitrate and perchlorate salts in aqueous mixtures of acetone-d₆ and Freon-12 by¹H,¹⁵N and³⁵Cl NMR spectroscopy. At temperatures lower than –90°C, proton and ligand exchange are slow enough to permit the direct observation of¹H resonance signals for coordinated and free water molecules, leading to an accurate measure of the Lu(III) hydration number. In perchlorate solution, in the absence of inner-shell ion-pairing, Lu(III) exhibits a maximum coordination number of six over the allowable concentration range of study, contrasting markedly with the report of values of six to nine or greater as determined by a similar NMR method. The absence of contact ion-pairing was confirmed by³⁵Cl NMR chemical shift and linewidth measurements. Extensive ion-pairing was observed in the nitrate solutions as reflected by the lower Lu(III) hydration numbers of two to three in these systems, the observation of two coordinated water signals, and¹⁵N NMR signals for two complexes. The¹H and¹⁵N NMR spectra and the hydration number could be accounted for by the presence of (H₂O)₄Lu(NO₃)²⁺ and (H₂O)₂Lu(NO₃) ₂ ¹⁺ .     

Low-temperature heat-capacity and standard molar enthalpy of formation of copper l-threonate hydrate Cu(C4H6O5)·0.5H2O(s)

The solid copper l-threonate hydrate, Cu(C₄H₆O₅)·0.5H₂O, was synthesized by the reaction of l-threonic acid with copper dihydrocarbonate and characterized by means of chemical and elemental analyses, IR and TG-DTG. Low-temperature heat-capacity of the title compound has been precisely measured with a small sample precise automated adiabatic calorimeter over the temperature range from 77 to 390 K. An obvious process of the dehydration occurred in the temperature range between 353 and 370 K. The peak temperature of the dehydration of the compound has been observed to be 369.304 ± 0.208 K by means of the heat-capacity measurements. The molar enthalpy, Δ_dH_m, of the dehydration of the resulting compound was of 16.490 ± 0.063 kJ mol⁻¹. The experimental molar heat capacities of the solid from 77 to 353 K and the solid from 370 to 390 K have been, respectively, fitted to tow polynomial equations with the reduced temperatures by least square method. The constant-volume energy of combustion of the compound, Δ_cU_m, has been determined as being −1616.15 ± 0.72 kJ mol⁻¹ by an RBC-II precision rotating-bomb combustion calorimeter at 298.15 K. The standard molar enthalpy of formation of the compound, , has been calculated to be −1114.76 ± 0.81 kJ mol⁻¹ from the combination of the data of standard molar enthalpy of combustion of the compound with other auxiliary thermodynamic quantities.     

The thermal dehydration and decomposition of Ba[Cu(C2O4)2(H2O)]·5H2O

The thermal behaviour of Ba[Cu(C₂O₄)₂(H₂O)]·5H₂O in N₂ and in O₂ has been examined using thermogravimetry (TG) and differential scanning calorimetry (DSC). The dehydration starts at relatively low temperatures (about 80°C), but continues until the onset of the decomposition (about 280°C). The decomposition takes place in two major stages (onsets 280 and 390°C). The mass of the intermediate after the first stage corresponded to the formation of barium oxalate and copper metal and, after the second stage, to the formation of barium carbonate and copper metal. The enthalpy for the dehydration was found to be 311±30 kJ mol^–1 (or 52±5 kJ (mol of H₂O)^–1). The overall enthalpy change for the decomposition of Ba[Cu(C₂O₄)₂] in N₂ was estimated from the combined area of the peaks of the DSC curve as –347 kJ mol^–1. The kinetics of the thermal dehydration and decomposition were studied using isothermal TG. The dehydration was strongly deceleratory and the -time curves could be described by the three dimensional diffusion (D3) model. The values of the activation energy and the pre-exponential factor for the dehydration were 125±4 kJ mol^–1 and (1.38±0.08)×10¹⁵ min^–1, respectively. The decomposition was complex, consisting of at least two concurrent processes. The decomposition was analysed in terms of two overlapping deceleratory processes. One process was fast and could be described by the contracting-geometry model withn=5. The other process was slow and could also be described by the contracting-geometry model, but withn=2.The values ofE _a andA were 206±23 kJ mol^–1 and (2.2±0.5)×10¹⁹ min^–1, respectively, for the fast process, and 259±37 kJ mol^–1 and (6.3±1.8)×10²³ min^–1, respectively, for the slow process.Dedicated to Prof. Menachem Steinberg on the occasion of his 65th birthday     

A novel catalytic method for the regeneration of carbonyl compounds from oximes using aluminum nitrate and NaBr as catalyst

<正>A wide variety of aldoximes and ketoximes were regenerated to corresponding carbonyl compounds with Al(NO_3)_3·9H_2O in presence of catalytic amounts of NaBr in CH_2Cl_2 at room temperature.     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Near infrared study of aqueous rare-earth ethylsulfates

The near infrared spectra of aqueous solutions of the ethylsulfates of La, Nd, Gd, Tb, Er, Yb, Lu, Y, and Na have been determined from about 0.2 mol-dm^–3 to nearly saturation. The extinction coefficients of water have been calculated taking into account the absorption of ethylslfate anions determined in separate experiments. Their values appeared to be nearly the same as that of pure water. The relative contents of free OH groups in 0.5 and 0.7M solutions have been estimated from the absorbances at 1160 nm. They were lower in solutions of the heavy rare-earth ethylsulfates (Tb, Er, Yb, Lu) than in equimolar solutions of the lighter ones (La, Nd), confirming our previous view that secondary hydration of the heavy trivalent rare-earth cations is distinctly stronger than that of the lighter ones. A comparison of the spectra of these aqueous ethylsulfates with those of perchlorates shows that the structure-breaking ability of the C₂H₅SO ₄ ^– ion is much smaller than that of perchlorate anion.     

A New,Mild, and Rapid Transformation of Acylals to Bisulfites in One-Pot Synthesis by Bismuth (III) Nitrate Pentahydrate

Abstract

Direct conversion of acylals to the corresponding bisulfites can be easily performed in the presence of bismuth (III) nitrate pentahydrate in ethanol at room temperature in good yields.