Synthesis and mesomorphism of diacetylene-bridged triphenylene discotic liquid crystal dimers

Connecting two discotic mesogens via a spacer not only stabilizes the columnar mesophase but also leads to the formation of glass columnar phase, and therefore improves the physical properties of discotic liquid crystals as organic semiconductor. Here, we report the synthesis of eight diacetylene-bridged triphenylene discotic liquid crystal dimers, [C18H6(OCnH2n+1)4(OMe)O2C-C8H16-C≡≡ C-]2, 3(n), (n = 4-8), [C18H6(OC6H13)5O2C-C8H16-C≡≡ C-]2, 6 and [C18H6(OC6H13)5O-(CH2)m-C≡≡ C-]2, 8(m), (m = 1, 3) by Eglinto...     

Molecular structures and electronic properties of helical thiophene carbon–sulfur oligomers, H2(C2S)nC2H2 (n?=?1–20)

Structure optimizations of the thiophene carbon–sulfur H₂(C₂S) _n C₂H₂ (n = 1–20) were carried out using density functional theory calculations at the B3LYP/6-31G(d) level. The B3LYP/6-31G(d) geometrical data for heptamer H₂(C₂S)₇C₂H₂ and undecamer H₂(C₂S)₁₁C₂H₂ are in good agreement with the X-ray crystallographic data for the helical (C₂S)_n β-heptathiophene and β-undecathiophene, respectively. Structural and electronic properties of helical oligothiophenes obtained at the B3LYP/6-311++G(d,p)//B3LYP/6-31G(d) level are reported. The strain energy formula of n oligothiophenes as a linear function of their molecular length was obtained.     

Theoretical and experimental study of fullerenol molecules and ions C60(OH)24 ? n(OL)n and C60(OH)24 ? n(OL)nL+ successively substituted by Alkali Metal atoms L (n = 1?24)

The equilibrium geometric parameters and the energetic characteristics of fullerenol molecules and ions C₆₀(OH)_{24 − n} (OL) _n and C₆₀(OH)_{24 − n} (OL) _n L⁺ successively substituted by alkali metal atoms L with the number of substitutions n = 1–24 have been calculated by the density functional theory B3LYP/6-31G* method. For all compounds, the structure of the covalent [C₆₀O₂₄] cage in which the oxygen atoms are bound to the C atoms of the six-membered [C₆] rings of the fullerene cage, six O atoms per [C₆] ring. The lithium derivatives have been considered in most detail. Computations have shown that the first four single substitutions of Li for H in the OH groups attached to the same C₆ ring require very low energy inputs, no more than 1 kcal/mol, and can spontaneously occur under common conditions. The further fifth and sixth single substitutions in the same C₆ ring are endothermic, but the required energy inputs are also modest (on the order of few kcal/mol). The first and second cooperative substitutions of Li for H simultaneously in all four hydroxylated C₆ rings require energy inputs of ∼3 and 11.6 kcal/mol, respectively; in the third and fourth fourfold substitutions, the energies increase by ∼15–16 kcal/mol. The mean partial energy per single substitution of Li for H in this series (n = 1−6) is ∼2 kcal/mol. Calculations have predicted that all C₆₀(OH)_{24 − n} (OLi) _n molecules with intermediated degrees of substitution (n = 1−16) can be obtained under the conditions of relatively low energy inputs (for example, under the conditions of the MALDI experiment) and can exist in the isolated state. For the sodium- and potassium-substituted analogues, the qualitative pattern persists, but the H/Na and H/K substitutions are somewhat more endothermic. The computational results are compared with the MALDI mass spectrum of the [C₆₀(OH) _x (ONa) _y -CH₃COONa) system.     

Enzyme biosensor based on the immobilization of HRP on SiO<Subscript>2</Subscript>/BSA/Au composite nanoparticles

In this work, an enzyme biosensor based on the immobilization of horseradish peroxidase (HRP) on SiO₂/BSA/Au/thionine/nafion-modified gold electrode was fabricated successfully. Firstly, nafion was dropped on the surface of the gold electrode to form a nafion film followed by chemisorption of thionine (Thi) as an electron mediator via the ion-exchange interaction between the Thi and nafion. Subsequently, the SiO₂/BSA/Au composite nanoparticles were assembled onto Thi film through the covalent bounding with the amino groups of Thi. Finally, HRP was immobilized on the SiO₂/BSA/Au composite nanoparticles due to the covalent conjugation to construct an enzyme biosensor. The surface topographies of the SiO₂/BSA/Au composite nanoparticles were investigated by using scanning electronic microscopy. The stepwise self-assemble procedure of the biosensor was further characterized by means of cyclic voltammetry and chronoamperometry. The enzyme biosensor showed high sensitivity, good stability and selectivity, a wide linear response to hydrogen peroxide (H₂O₂) in the range of 8.0 × 10^-6 ∼ 3.72 × 10^-3 mol/L, with a detection limit of 2.0 × 10^-6 mol/L. The Michaelies-Menten constant K_M^app K_M^{app} value was estimated to be 2.3 mM.     

Physicochemical features of the formation of siliceous porous mesophases

The formation of siliceous mesoporous mesophase materials (SiO₂-MMM) prepared by precipitation of soluble forms of SiO₂ with alkyltrimethylalkylammonium bromide C _n TMABr (n=12, 14, 16, 18 is the number of carbon atoms in the alkyl chain) was investigated. An increase in then value has no influence on the mechanism of formation of SiO₂-MMM but causes an increase in the size and volume of mesopores with the mesopore specific surface area and wall thickness remaining virtually constant.     

Morphology of micron-sized monodispersed poly(butyl methacrylate)/polystyrene composite particles produced by seeded dispersion polymerization

In order to develop the seeded dispersion polymerization technique for the production of micron-sized monodispersed core/shell composite polymer particles the effect of polymerization temperature on the core/shell morphology was examined. Micron-sized monodispersed composite particles were produced by seeded dispersion polymerizations of styrene with about 1.4-μm-sized monodispersed poly(n-butyl methacrylate) (Pn-BMA) and poly(i-butyl methacrylate) (Pi-BMA) particles in a methanol/water (4/1, w/w) medium in the temperature range from 20 to 90 °C. The composite particles, PBMA/polystyrene (PS) (2/1, w/w), consisting of a PBMA core and a PS shell were produced with 2,2′-azobis(4-methoxy-2,4-dimethyl valeronitrile) initiator at 30 °C for Pn-BMA seed and with 2,2′-azobis(isobutyronitrile) initiator at 60 °C for Pi-BMA seed. The polymerization temperatures were a little above the glass-transition temperatures (T _g) of both Pn-BMA (20 °C) and Pi-BMA (40 °C). On the other hand, when the seeded dispersion polymerizations were carried out at much higher temperatures than the T _g of the seed polymers, composite particles having a polymeric oil-in-oil structure were produced. Received: 14 October 1998 Accepted in revised form: 2 June 1999     

CO2-activation and enhanced capture by C6Li6: A density functional approach

In this study, we propose a simple and yet effective approach for capture and storage of CO₂ by C₆Li₆. C₆Li₆ possesses a planar star-like structure, whose ionization energy is lower than that of Li atom and hence, it behaves as a superalkali. We have systematically studied the interaction of successive CO₂ molecules with C₆Li₆ using long-range dispersion corrected density functional ωB97xD/6-311 + G(d) calculations. We notice that these interactions lead to stable C₆Li₆-nCO₂ complexes (n = 1-6) in which the structure of CO₂ moieties is bent appreciably (122-125°) due to electron transfer from C₆Li₆, whose planarity is distorted only slightly (≤7°). This clearly suggests that the CO₂ molecules can successfully be activated and captured by C₆Li₆. It has been also noticed that the bond-length of CO₂ in C₆Li₆-nCO₂ complexes increases monotonically whereas adsorption energy decreases, ranging 3.18-2.79 eV per CO₂ with the increase in n. These findings establish the potential of C₆Li₆ for capture and storage of CO₂ molecules.     

[C5Li5]Mgn[C5Li5] (n?=?2–8): novel sandwich complexes containing –Mg–Mg– chain

A density functional theory (DFT) investigation on novel sandwich-type D ₅ [C₅Li₅]Mg _n [C₅Li₅] (n = 2–8) complexes containing –Mg–Mg– chain has been performed in this work. The equilibrium geometries, electronic structures, vibrational frequencies, and stabilities of these complexes are researched by B3LYP and BP86 methods at 6-311+G(d) levels of theory. The Mg _n ²⁺ sandwich complexes with D ₅ symmetry are all true minima on the potential energy surface. NBO analyses for the series of complexes reveal that the Mg–Mg bond is a weak σ covalent bond. There are mainly electrostatic interactions between C₅Li₅ ⁻ ligands and Mg _n ²⁺(n = 2–8) nuclear in these complexes. The NICS and NICS_zz computed with GIAO-B3LYP/6-311+G(d) indicates that the C₅Li₅ ⁻ rings in the series of complexes are aromatic. These novel complexes turn out to be strongly thermodynamically favored in the gas phases and may be targeted in future experiments to expand the structural domain of sandwich-type complexes.     

A rapid and universal bacteria-counting approach using CdSe/ZnS/SiO2 composite nanoparticles as fluorescence probe

In this paper, a rapid, simple, and sensitive method was described for detection of the total bacterial count using SiO₂-coated CdSe/ZnS quantum dots (QDs) as a fluorescence marker that covalently coupled with bacteria using glutaraldehyde as the crosslinker. Highly luminescent CdSe/ZnS were prepared by applying cadmium oxide and zinc stearate as precursors instead of pyrophoric organometallic precursors. A reverse-microemulsion technique was used to synthesize CdSe/ZnS/SiO₂ composite nanoparticles with a SiO₂ surface coating. Our results showed that CdSe/ZnS/SiO₂ composite nanoparticles prepared with this method possessed highly luminescent, biologically functional, and monodispersive characteristics, and could successfully be covalently conjugated with the bacteria. As a demonstration, it was found that the method had higher sensitivity and could count bacteria in 3 × 10² CFU/mL, lower than the conventional plate counting and organic dye-based method. A linear relationship of the fluorescence peak intensity (Y) and the total bacterial count (X) was established in the range of 3 × 10²–10⁷ CFU/mL using the equation Y = 374.82X − 938.27 (R = 0.99574). The results of the determination for the total count of bacteria in seven real samples were identical with the conventional plate count method, and the standard deviation was satisfactory.     

Synthesis and characterization of well-defined poly(methyl methacrylate)/CaCO3/SiO2 three-component composite particles via reverse atom transfer radical polymerization

The attempt to prepare structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, via reverse atom transfer radical polymerization (ATRP), using 2-2′-azo-bis-isobutyronitrile as initiator and Cu(II) bromide as catalyst was reported. CaCO₃/SiO₂ two-component composite particles were first obtained through sol–gel method, and their morphology and surface element information were determined by transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. The results indicate that the CaCO₃ was encapsulated by the obtained SiO₂. After being modified by silane coupling agent, the CaCO₃/SiO₂ composite particles copolymerized with methyl methacrylate (MMA) under standard reverse ATRP conditions to produce PMMA/CaCO₃/SiO₂ three-component composite particles. In the case concerned, first-order kinetic plots and linear increase of molecular weight (Mn) vs conversion and narrow molecular weight distribution for the graft polymer samples were observed. Furthermore, the gel permeation chromatography results illustrated that both the free PMMA chains from the solvent and the graft PMMA chains from the surface of CaCO₃/SiO₂ two-component composite particles were growing at the same rate. Characterizations of the PMMA-grafted CaCO₃/SiO₂ composite particles were done by Fourier transform infrared and thermogravimetric analysis. The results showed that the surface of the modified inorganic particles was grafted by the MMA and that the grafting percentage was about 8.7%.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

A viscometric study of tuning micellar morphology by organic additives

The micellar morphology in aqueous 0.2 M sodium dodecyl sulfate (SDS) solutions has been studied in the simultaneous presence of organic salts (anilinium hydrochloride, AHC; ortho-toluidine hydrochloride, oTHC; para-toluidine hydrochloride, pTHC) and aliphatic alcohols (n-butanol, C₄OH; n-pentanol, C₅OH; n-hexanol, C₆OH; n-heptanol, C₇OH), aliphatic amines (n-butylamine, C₄NH₂; n-pentylamine, C₅NH₂; n-hexylamine, C₆NH₂; n-heptylamine, C₇NH₂), or hydrocarbons (n-hexane, C₆H; n-heptane, C₇H) by viscosity measurements under Newtonian flow conditions at 30 °C. Addition of alcohols and amines causes micellar growth which is found to be dependent upon chain length of the additive and nature of organic salt counterion. It is observed that amines are more effective in increasing the viscosity of the system if added in pure 0.2 M SDS solution, while SDS + pTHC system was found versatile when alcohols were added to this system. The increased viscosity or the micellar growth is explained in terms of the site of solubilization of the respective additive and the interaction of the additive with micellar surface and salt counterion present in the head group region. Hydrocarbons are nearly ineffective in inducing micellar growth and can be used as ‘micellar destroyer’ for the grown micelles. The additives used are found effective in tuning the environment of the micelle which is reflected in viscosity behavior. This work may find use in micellar ultrafiltration as well as in mimicking the natural cell, which has several aspects common with the micelle.     

n-Butane,iso-Butane and 1-Butene Adsorption on Imidazolium-Based Ionic Liquids Studied with Molecular Beam Techniques

The interaction of molecules, especially hydrocarbons, at the gas/ionic liquid (IL) surface plays a crucial role in supported IL catalysis. The dynamics of this process is investigated by measuring the trapping probabilities of n-butane, iso-butane and 1-butene on a set of frozen 1-alkyl-3-methylimidazolium-based ILs [C_nC₁Im]X, where n=4, 8 and X⁻=Cl⁻, Br⁻, [PF₆]⁻ and [Tf₂N]⁻. The decrease of the initial trapping probability with increasing surface temperature is used to determine the desorption energy of the hydrocarbons at the IL surfaces. It increases with increasing alkyl chain length n and decreasing anion size for the ILs studied. We attribute these effects to different degrees of alkyl chain surface enrichment, while interactions between the adsorbate and the anion do not play a significant role. The adsorption energy also depends on the adsorbing molecule: It decreases in the order n-butane>1-butene>iso-butane, which can be explained by different dispersion interactions.     

SPEC Process II. Adsorption of strontium and some typical co-existent elements contained in high level liquid waste onto a macroporous silica-based crown ether impregnated functional composite

To separate Sr(II), one of the heat emitting nuclides, from high level liquid waste (HLLW), a macroporous silica-based DtBuCH18C6 polymeric composite, DtOct/SiO₂-P, was synthesized by means of molecular modification of 4,4′,(5′)-di(tert-butylcyclohexano)-18-crown-6 (DtBuC H18C6) with a long-chain 1-octanol. It was performed by impregnating and immobilizing DtBuCH18C6 and 1-octanol molecules into the pores of the SiO₂-P particles, the macroporous silica-based support. The adsorption of Sr(II) and some co-existent typical elements Na(I), K(I), Cs(I), Ru(III), Mo(VI), Pd(II), Ba(II), La(III), and Y(III) contained in highly active liquid waste (HLW) towards DtOct/SiO₂-P was investigated at 323 K. The effects of contact time and the concentration of HNO₃ in a range of 0.1–5.0M on the adsorption of the tested metals were examined. The macroporous silica-based DtOct/SiO₂-P polymeric composite showed strong adsorption ability and high selectivity for Sr(II) over all of the tested metals except Ba(II). The optimum acidity of Sr(II) adsorption onto DtOct/SiO₂-P was determined to be 2.0M HNO₃. The bleeding behavior of DtOct/SiO₂-P in aqueous phase was evaluated using total organic carbon (TOC) analysis. The content of TOC increased with increasing the HNO₃ concentration and contact time. It resulted from the decrease in the stability of the associated species, C₈H₁₇-OH• DtBuCH18C6 formed through hydrogen binding, because of high temperature.     

单分散SiO2纳米颗粒复合凝胶电解质的应用

以单分散程度较高的SiO₂纳米颗粒(约130 nm)作为填料,聚偏氟乙烯-六氟丙烯(PVDF-HFP)作为聚合物基质,采用简便的物理共混法制备出了一种单分散SiO₂纳米颗粒复合凝胶聚合物电解质(MCGPEs)并将其应用于锂电池中。扫描电镜结果表明,SiO₂纳米颗粒在聚合物基体中分散均匀。与传统凝胶聚合物电解质(GPEs)和商业SiO₂颗粒复合凝胶电解质(CGPEs)相比,MCGPEs有着更高的电解液吸液能力和离子电导率,并且具备更强的锂离子迁移能力。此外,使用MCGPEs作为电解质的锂电池,在1.0C下历经300次循环后仍然保持了121.1 mAh·g^-1的较高比容量,表现出了优异的循环性能。同时,其倍率性能也十分优异,在10C倍率下获得了135 mAh·g^-1的比容量,远高于GPEs锂电池(76.2 mAh·g^-1)。     

g-C_3N_4/CaTi_2O_5复合材料制备及其光催化性能

利用类石墨氮化碳(g-C_3N_4)和亚稳相钙钛氧化物(CaTi_2O_5)固相法制备C_3N_4/CaTi_2O_5复合材料。利用X射线衍射(XRD)、金相显微镜、扫描电子显微镜(SEM)及附带能谱分析仪(EDS)和N2吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计(UV-Vis)测试了样品的光吸收性能,研究C_3N_4与CaTi_2O_5物质的量之比(nC_3N_4/nCaTi_2O_5)对C_3N_4/CaTi_2O_5复合样品的物相结构和微观形貌的影响,同时考察C_3N_4/CaTi_2O_5复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明:相比纯C_3N_4和CaTi_2O_5样品,C_3N_4/CaTi_2O_5复合样品在可见光下具有较高的光催化性能,随着nC_3N_4/nCaTi_2O_5增加,样品的光催化降解率随之增加而后降低,当nC_3N_4/nCaTi_2O_5=1∶1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

Direct Mass Spectrometric Study of the Ionic Species Content of a C<Subscript>2</Subscript>HCl<Subscript>3</Subscript>/He/O<Subscript>2</Subscript> Microwave Discharge Plasma

Direct on-line studies of a C₂HCl₃/He/O₂ microwave discharge plasma made possible the evolution and detection of many unfamiliar ionic species. Numerous ionic chlorocarbons, chlorohydrocarbons, oxygenated chlorohydrocarbons, oxygenated hydrocarbon radicals, and simple hydrocarbon species were identified mass spectrometrically as by-products: C _m Cl _n (m = 1–4, 6, 8; n = 1–8), C _m H _n Cl _x (m = 1–4, 6, 7, 10; n, x = 1–6), C _m H _n Cl _x O _y (m = 1–5, 12; n = 1–7; x = 1, 2, 4, 6; y = 1–3), C _n H_2n−1O (n = 2, 3), C _m H _n (m = 2, 4, 6, 8; n = 2, 4), and so on. The studies clearly showed the presence of various unfamiliar positive ionic O-containing species such as C₂ClO₂, CCl₃CO, C₂H₂Cl₄O₂, and C₄H₂Cl₆O₃. It is apparent that positive-ion reactions play a significant role in producing many ionic species in the chemistry of C₂HCl₃ plasmas.     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

Structure and coordination of organometallic groups on a chemically modified SiO2 surface

The structural, electronic, and energy parameters of the metal-containing clusters (H₃SiO)₃Si−O−XMe _n (X=H, B, Al, or Zn;n=0, 1, or 2), which model organometallic groups on a SiO₂ surface modified with B-, Al-, and Zn-containing alkyls, have been studied by quantum-chemical methods. Full geometry optimization for these clusters was carried out by the SCF MO LCAO method taking into account the electron correlation within the frameworks of the MP2 and B3LYP schemes using the 6-31G(d) (6-311G(d) for Zn) basis set. The effect of the crystal environment was taken into account in calculations of siliconoxygen clusters containing 10 and 30 silicon atoms using theab initio SCF/6-31G(d) and semiempirical MNDO-PM3 methods. Various modes of coordination and interactions of organometallic groups with oxygen atoms of surface groups were studied. For the organoaluminum group on the surface, two stable conformations were found, namely, the three-coordinate structure with the chain −O−AlMe₂ ligand and the four-coordinate (quasicyclic) structure with the Al atom that forms two nonequivalent bonds with the O atoms at the same Si atom. The four-coordinate structure is energetically more favorable. No stable structures were found for the organoboron and organozinc fragments. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1296–1303, July, 1998.     

Theoretical Study of the Structures,Properties and Spectroscopies on Fullerene Hydrides C<Subscript>26</Subscript>H<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 2, 4, 6, 8)

The structures, stability patterns of C₂₆H _n (n = 2) formed from the initial D _3h C₂₆ fullerene were investigated by use of second-order-Moller–Plesset perturbation theory. The study of the stability patterns of hydrogenation reaction on C₂₆ cage revealed that type (β) carbons were the active site and the analyses of π-orbital axis vector indicated that the reactivity of C₂₆ was the result of the high strain and the hydrogenation reaction on C₂₆ cage was highly exothermic. The calculated ¹³C NMR spectra of C₂₆H _n (n = 2) predicted that the two sp ³ hybridization carbons in C₂₆H _n (n = 2) obviously moved to high field compare with that in D _3h C₂₆. Hence, the C₂₆H₂ should be obtained and detected experimentally. Similarly, the structures and reaction energies of C₂₆H _n (n = 4, 6, 8) were further studied at HF/6-31G*, B3LPY/6-31G* and MP2/6-31G* level. The results suggested the hydrogenation products of C₂₆, C₂₆H _n (n = 4, 6, 8), were more stable than the C₂₆ cage.