Acousto-optic study of the unusual cases of reflection of bulk elastic waves in a paratellurite crystal

The propagation and reflection of bulk ultrasonic waves in a paratellurite crystal have been investigated by the acousto-optic method. Simultaneous excitation of two acoustic waves by one piezoelectric transducer has been observed in a cell of complex, specially chosen configuration. Maximally efficient conversion of the energy of a quasi-longitudinal wave into a single reflected quasi-shear wave with a walkoff angle 72° is implemented for the reflection from a free crystal boundary. The wave beam compression by a factor of 7 is observed for this reflection. A reflection (close to backward) of waves with an angle of spatial separation of the incident and reflected beams equal to 8° is also implemented. The acousto-optic figure of merit values of the medium are calculated for arbitrary propagation and polarization directions of the interacting light and ultrasonic waves. Possible applications of the effects studied in acousto-optics and acoustoelectronics are indicated.     

Experimental study of ultrasonic beam sectors for energy conversion into Lamb waves and Rayleigh waves

When a bounded beam is incident on an immersed plate Lamb waves or Rayleigh waves can be generated. Because the amplitude of a bounded beam is not constant along its wave front, a specific beam profile is formed that influences the local efficiency of energy conversion of incident sound into Lamb waves or Rayleigh waves. Understanding this phenomenon is important for ultrasonic immersion experiments of objects because the quality of such experiments highly depends on the amount of energy transmitted into the object. This paper shows by means of experiments based on monochromatic Schlieren photography that the area within the bounded beam responsible for Lamb wave generation differs from that responsible for Rayleigh wave generation. Furthermore it provides experimental verification of an earlier numerical study concerning Rayleigh wave generation.     

Numerical simulation of the ultrasonic waves generated by ring-shaped laser illumination patterns

The generation of ultrasound in aluminum plate subjected to ring-shaped laser beam illumination has been studied quantitatively by using the finite element method. The superposition effects of surface acoustic waves on the top surface and the bulk ultrasonic waves on the rear surface of specimen have been obtained in a single simulation. The typical displacement profiles of the bulk ultrasonic wave at various depths along the central axis of the ring are obtained for three different radii, and the effect of the ring radius on the focal depths of the compression and shear mode are determined. The numerical results confirm that the focal depth of a bulk acoustic mode is determined by the directivity patterns of the acoustic mode generated by point-like laser sources via a thermoelastic mechanism, which depends on the physical constants of elastic medium.     

3D analysis of interaction of Lamb waves with defects in loaded steel plates

The objective of the research presented here is the investigation of the interaction of guided waves with welds, defects and other non-uniformities in steel plates loaded by liquid. The investigation has been performed using numerical simulation for 2D and 3D cases by the finite differences method, finite element method and measurement of 3D distributions of acoustic fields. Propagation of the S(0) mode in a steel plate and its interaction with non-uniformities was investigated. It was shown that using the measured leaky wave signals in the water loading of the steel plate and by application of signal processing, the 3D ultrasonic field structure inside and outside of the plate can be reconstructed. The presence of leaky wave signals over the defect caused by the mode conversion of Lamb waves has been proved using the numerical modelling and experimental investigations. The developed signal and data processing enables to visualise dynamics of ultrasonic fields over the plate, and also to estimate spatial positions of defects inside the steel plates.     

长骨中振动声激发超声导波的方法

为了实现一定频段内任意低频下在长骨中激励导波信号,本文提出一种采用聚焦高频(5 MHz)超声换能器在长骨皮质骨中激发低频(150 kHz)超声导波的振动声方法.首先介绍了板状超声导波理论和双声束共聚焦法与单声束调幅法激发振动声的基本原理;进而采用三维有限元仿真方法分析振动声激发低频超声导波的基本现象,然后结合牛胫骨板离体实验,验证振动声激发低频超声导波的可行性.结果均表明,双声束共焦与单声束振动超声均可在骨板中激发低频超声导波.相关研究方法有助于提高空间域长骨中超声导波测量精度,以及在一定频段内实现任意频率激励等,对发展低频超声导波在体测量长骨皮质骨的新技术具有一定的指导意义.     

基于频散补偿和分数阶微分的多模式兰姆波分离

由于兰姆波的多模和频散特性,实际检测时在同一激发频率下存在多种模式的混合信号,而各模式信号有不同的频散特性,使得在时频混叠的情况下兰姆波的检测变得十分复杂.本文在频散补偿的基础上,通过时延函数建模,依靠不同模式频散趋势的差异性,将时频混叠信号的分离问题转化为部分模式混叠信号的分离问题.基于分数阶微分的理论,用信号幅值谱分数阶微分极大值和对应频率分别与微分阶次拟合多项式实现特征参数的提取并依靠特征参数重建幅值谱.结合相位谱重构时域信号以实现部分混叠信号中频散补偿后的模式的分离.最后恢复频散获得分离后的兰姆波信号.仿真和实验结果表明,本文方法不仅可以实现时频混叠多模式兰姆波信号的分离,更能保证分离精度,有助于复杂多模式频散信号的分离与处理的进一步研究.     

激光激发瑞利波检测表面倾斜缺陷的研究

研究激光激发瑞利波检测样品的表面倾斜缺陷。基于频域热弹耦合方程,采用有限元方法建立激光激发瑞利波检测倾斜缺陷的数值模型,研究倾斜缺陷的检测机理。数值计算含不同的长度及倾斜角度缺陷的样品中瞬态位移波形,分析瑞利波在倾斜缺陷处模式转换的过程,研究各种瑞利波的传播路径。在此基础上,研究缺陷宽度与材料黏性对瑞利波传播及缺陷检测的影响。结果表明:瑞利波在缺陷处产生的反射及透射瑞利波的到达观测点的时间可以检测缺陷位置和长度,瑞利波在缺陷的底部发生模式转换产生的切变波可以检测缺陷倾斜角度。数值结果和已有的实验结果一致,从而为表面倾斜缺陷的检测提供有效的理论依据。      

Interaction of low-frequency axisymmetric ultrasonic guided waves with bends in pipes of arbitrary bend angle and general bend radius

The use of ultrasonic guided waves for the inspection of pipes with elbow and U-type bends has received much attention in recent years, but studies for more general bend angles which may also occur commonly, for example in cross-country pipes, are limited. Here, we address this topic considering a general bend angle φ, a more general mean bend radius R in terms of the wavelength of the mode studied and pipe thickness b. We use 3D Finite Element (FE) simulation to understand the propagation of fundamental axisymmetric L(0, 2) mode across bends of different angles φ. The effect of the ratio of the mean bend radius to the wavelength of the mode studied, on the transmission and reflection of incident wave is also considered. The studies show that as the bend angle is reduced, a progressively larger extent of mode-conversion affects the transmission and velocity characteristics of the L(0, 2) mode. However the overall message on the potential of guided waves for inspection and monitoring of bent pipes remains positive, as bends seem to impact mode transmission only to the extent of 20% even at low bend angles. The conclusions seem to be valid for different typical pipe thicknesses b and bend radii. The modeling approach is validated by experiments and discussed in light of physics of guided waves.     

Coaxial cavity gyrotron with dual RF beam output

A 140-GHz, 1.5-MW, TE_28,16-coaxial cavity gyrotron with a dual RF beam output has been designed, built, and tested. For the first time, the generated RF power has been split into two parts and coupled out through two RF output windows in order to reduce the power loading in the windows. The quasioptical output system is based on a two-step mode conversion scheme. First, the cavity mode TE_-28,16 is converted into its degenerate whispering gallery mode TE_+76,2 using a rippled-wall mode converter. Then, this mode is transformed into two TEM₀₀ output wave beams. A maximum rf output power of about 950 kW with an output efficiency of 20% has been measured. According to numerical calculations, an rf power above 1.5 MW is expected to be generated in the cavity. Even if all losses are taken into account, a discrepancy between experiment and calculations remains. The power deficit seems to be partly caused by the influence of the stray radiation captured inside the tube. However, the two main reasons are probably an incomplete mode conversion from TE_-28,16 to TE_+76,2 and a large energy spread of the electron beam due to trapped electrons. An increased amount of captured stray radiation resulted in a reduced stability of operation. A single-stage depressed collector was used successfully, increasing the RF output efficiency from 20% to 29%     

超声导波评价长骨骨折的仿体实验研究

定量超声评价长骨骨折已成为近年来的研究热点之一,超声导波模式转换理论可被应用于长骨骨折状况的评价。采用三维时域有限差分法分析骨折长骨中导波模式转换的基本规律,提取模式转换定量评价参数;进而结合亚克力管仿体实验,分析不同裂纹程度下导波模式的转换情况。仿真与仿体实验表明,导波模式能量参数与裂纹程度具有很好的相关性,可用于评价长骨骨折状况。     

First-sound rarefaction and compression waves in superfluid He-II

The evolution of the form of first-sound waves, excited in superfluid He-II by a pulsed heater, with increasing power Q of the perturbing heat pulse is investigated. In liquid compressed to 13.3 atm, a first-sound rarefaction wave (wave of heating) is observed, which transforms into a compression wave and then into a compression shock wave as Q increases, i.e., the change in the conditions of heat transfer at a solid-He-II interface can be judged according to the change in the form of the sound wave. It follows from our measurements that in He-II compression waves are excited at pressures P⩾1 atm primarily as a result of the thermal expansion of a normal He-I liquid layer arising at the He-II-heater interface for power Q above a critical level. Pis’ma Zh. éksp. Teor. Fiz. 69, No. 10, 716–720 (25 May 1999)     

Finite amplitude waves in ion-beam plasma systems

Several types of solitary waves can exist in an ion-beam plasma system. Their velocity is determined as a function of the beam velocity and the wave amplitude θ₀. The region of existence is limited for θ₀ → 0 by the linear modes, and for finite θ₀ by the trapping of the beam or background ions.     

Upconversion of whistler waves by gyrating ion beams in a plasma

A gyrating ion beam, with a ring-shaped distribution in velocity, supports negative energy beam modes near the harmonics of beam gyro-frequency. An investigation of the non-linear interaction of high-frequency whistler waves with the negative energy beam cyclotron mode is made. A non-linear dispersion relation is derived for the coupled modes. It is shown that a gyrating ion-beam frequency upconverts the whistler waves separated by harmonics of beam gyro-frequency. The expression for the growth rate of whistler mode waves has been derived. In Case 1, a high-amplitude whistler wave decays into two lower frequency waves, called a low-frequency mode and a side band of frequency lower than that of pump wave. In Case 2 a high-amplitude whistler wave decays into two lower frequency daughter waves, called the low-frequency mode and whistler waves. Generation mechanism of these waves has application in space and laboratory plasmas.     

A new ultrasonic technique for the measurement of liquid level

A new design of pulse-echo ultrasonic liquid level gauge is described in which the ultrasonic pulse (here a Rayleigh or a Lamb wave) travels down a metal bar or strip towards the liquid surface, where, through a double mode-conversion process and a special reflecting structure, a strong echo is generated which travels back up the bar to the receiving transducer.The geometry of the special reflecting structure is outlined, and it is shown how this affects the basic accuracy of measurement. Inaccuracies arising from other effects like temperature variation, viscosity and poor signal-to-noise ratio are also discussed. Some mechanical variants, like using the wall of the tank in place of the metal bar carrying the ultrasonic wave and the use of corner reflectors as part of the reflecting structure, are also considered.A note in the Appendix briefly describes one method which has been used successfully for the generation of Rayleigh and Lamb waves.     

高效率受激喇曼散射源

本文报道在有机溶液(CH₃)₂SO中,用宽带5314埃激光泵浦,得到强6296埃斯托克斯相干受激喇曼辐射的实验。在中等泵浦功率密度下,受激喇曼斯托克斯辐射前向波能量转换效率达38％,观察到了后向斯托克斯受激辐射,后向波强度是前向散射波强度的80％,测量了前向散射的增益为2.5×10^-3厘米/兆瓦,测量了前向、后向散射光束的空间分布。论证了后向散射光束方向性的改善。 关键词：     

Ultrasonic field characteristics in resonant standing waves

The application of high performance ultrasound in resonant standing waves recently has obtained some new technical applications as the ultrasonic-standing-wave-atomization (USWA) of liquids. In this application a resonant ultrasonic wave field is generated by means of two oscillating transducers facing each other on a common axis. Characterization of the wave field formation in this resonant, high-amplitude case of ultrasonic standing wave fields is of significant importance for understanding and optimization of such processes. Computational simulation of the sound field provides insight in the complex gas behaviour and atomization process. The numerical simulation of the ultrasonic field characteristics is based on the fundamental hydrodynamic conservation equations including nonlinear and viscous effects. The numerical calculation procedure and boundary conditions will be outlined. Results for the ultrasonic wave field characteristics in standard geometric arrangements as well as possibilities for energy density enhancement will be discussed.     

Ultrasonic diffraction grating spectroscopy and characterization of fluids and slurries

The ultrasonic diffraction grating is formed by machining triangular grooves, 300 microns apart, on a stainless steel surface. The grating surface is in contact with the liquid or slurry. The ultrasonic beam, traveling in the solid, strikes the back of the grating and produces a transmitted m=1 beam in the liquid. The angle of this beam in the liquid increases with decreasing frequency and the critical frequency FCR occurs when the angle is 90 degrees. At frequencies below FCR, this m=1 wave does not exist and its energy is shared with other types of waves. The signal of the reflected m=0 wave is observed and an increase is observed at FCR. This information yields the velocity of sound in the liquid and particle size.     

A staggered double vane circuit for a W-band traveling-wave tube amplifier

Based on the combination of a staggered double vane slow wave structure(SWS) and round electron beam,a 200-W W-band traveling-wave tube(TWT) amplifier is studied in this paper.The main advantages of round beam operation over the sheet beam is that the round beam can be formed more easily and the focus requirement can be dramatically reduced.It operates in the fundamental mode at the first spatial harmonic.The geometric parameters are optimized and a transition structure for the slow wave circuit is designed which can well match the signal that enters into and goes out from the tube.Then a TWT model is established and the particle-in-cell(PIC) simulation results show that the tube can provide over 200-W output power in a frequency range of 88 GHz-103 GHz with a maximum power of 289 W at 95 GHz,on the assumption that the input power is 0.1 W and the beam power is 5.155 kW.The corresponding conversion efficiency and gain at 95 GHz are expected to be 5.6% and 34.6 dB,respectively.Such amplifiers can potentially be used in high power microwave-power-modules(MPM) and for other portable applications.     

Spatial and temporal study of shock waves generated by laser ablation for Ti target

ＳｐａｔｉａｌａｎｄｔｅｍｐｏｒａｌｓｔｕｄｙｏｆｓｈｏｃｋｗａｖｅｓｇｅｎｅｒａｔｅｄｂｙｌａｓｅｒａｂｌａｔｉｏｎｆｏｒＴｉｔａｒｇｅｔＷＵＪｉａｄａ；ＷＵＬｉｎｇｈｕｉ；ＷＵＣｈａｎｇｚｈｅｎｇ；ＬＩＦｕｍｉｎｇ（ＳｔａｔｅＫｅｙＪｏｉｎｔＬａ...     

Elastic model for simulating ultrasonic inspection of smooth and rough defects

A model is presented for the scattering of ultrasonic waves from smooth and randomly rough defects. The model uses Kirchhoff theory and is elastic, such that mode-conversion between compressional and shear waves is included in the formulation. The model is designed to simulate ultrasonic non-destructive testing situations, by specifying the location and orientation of a defect within an isotropic material, together with transmitter and receiver locations on an inspection surface. Results are presented for the scattering of both monochromatic waves and of pulses. It is shown how small levels of roughness can affect echodynamic curves and how diffracted signals may become lost due to scatter from the rough faces of defects. It is also shown that the usual rules for coupling between waves of all three modes no longer hold when roughness is present. In particular, roughness leads to coupling between horizontally polarized shear (SH) waves and the other two wave modes. The model predictions are also compared with an earlier acoustic model, indicating the importance of mode-conversion effects when considering rough defects embedded within solids.