Reentrant resistance via spin-polarized quasiparticle self injection in CMR/HTSC heterostructures

Epitaxial superlattices of half-metal, colossal magnetoresistive La_2/3Ca_1/3MnO₃ (HM-CMR) and high-T_c superconducting YBa₂Cu₃O_7-δ (HTSC) are grown with thick and thin modulation lengths (Λ) of YBCO/LCMO, with Λ = 280 nm and 12.5 nm; respectively, on SrTiO₃ (0 0 1) single-crystalline substrates by pulsed laser deposition. Transport measurements R(T) show a resistive state below T = 35 K although the superconducting transition temperature is found to be T_c = 60 K and 63 K for both different superlattices, respectively. The onset of the resistive state coincides with a magnetic transition of the samples. This can be explained by a diffusion of spin-polarized quasiparticles into the superconducting film. Which can be considered as evidence for inverse-proximity effects over a wide temperature range in HM-CMR/HTSC heterostructures.     

Effect of deposition conditions on YBa2Cu3O7−δ thin films by inverted cylindrical magnetron sputtering and substrate effects

The dependence of YBCO thin film properties on the deposition conditions was studied for different substrates. The deposition conditions were optimized for the epitaxial growth of high quality YBCO thin films of 1500 Å thickness onto single crystal (100-oriented) SrTiO₃ (STO), MgO and LaAlO₃ (LAO) substrates by DC Inverted Cylindrical Magnetron Sputtering (ICMS). The samples were investigated in detail by means of X-ray diffraction analysis (XRD), EDX, AFM, ρ-T, magnetic susceptibility and current-voltage (I-V) characterizations. The samples show strong diamagnetic behavior and sharp transition temperatures of 89-91 K with ΔT<0.5 K. XRD of the samples exhibited highly c-axis orientation. The full width at half maximum (FWHM) values of the rocking curves were ranging typically from 0.22 to 0.28°. The samples have smooth surfaces as shown from AFM micrographs. The surface roughness, R_a, changed between 5-7 nm. I-V characteristics were obtained from the 20 μm-wide microbridges, which were patterned by a laser writing technique. The critical current densities (J_c, 1.06×10⁶ for LAO-based YBCO, 1.39×10⁶ for MgO-based YBCO, 1.67×10⁶ A/cm² for STO based YBCO) of the microbridges were evaluated from I-V curves at 77 K.     

c-Axis orientation control of YBa2Cu3O7−x films grown on inclined-substrate-deposited MgO-buffered metallic substrates

Biaxially textured YBa₂Cu₃O_7−x (YBCO) films were grown on non-textured metal substrates with inclined-substrate-deposited (ISD) MgO as template. The biaxial texture feature of the films was examined by X-ray pole-figure analysis, φ-scan, and 2θ-scan. A tilt angle of 32° of the MgO[001] with respect to the substrate normal was observed. Epitaxial growth of YBCO films with c-axis tilt angle of 32° with respect to the substrate normal was obtained on these substrates with SrTiO₃(STO) as buffer layer. Whereas, by choosing yttria-stabilized ZrO₂ and CeO₂ instead of STO as buffer layer, a c-axis untilted YBCO film was obtained. Higher values of T_c=91 K and J_c=5.5×10⁵ A/cm² were obtained on the c-axis untilted YBCO films with 0.46 μm thickness at 77 K in zero field. Comparative studies revealed a unique role of CeO₂ in controlling the orientation of the YBCO films grown on ISD-MgO buffered metal substrates.     

Fluctuation conductivity along the c-axis and parallel to the ab-planes in melt-textured YBa2Cu3O7−δ samples doped with Y211 phase

We report measurements of in-plane and out-of-plane fluctuation conductivity under low applied magnetic fields up to 500 Oe in two melt-textured YBa₂Cu₃O_7−δ (YBCO) samples. 3D-Gaussian and genuine critical 3D-XY-E fluctuation regimes were identified in the conductivity parallel to the ab plane. In addition, a regime beyond 3D-XY was observed in the immediate vicinity of the superconducting transition of the in-plane fluctuation conductivity. The 3D-XY-E scaling was also identified in the fluctuation conductivity along the c-axis in the sample with smaller content of the Y₂BaCuO₅ (Y211) phase. This result indicates that the superconducting state in YBCO has a three-dimensional character, in contradiction to some studies suggesting that critical phenomenology is fundamentally distinct in orientations parallel or perpendicular to the Cu-O₂ planes of the high-temperature superconductors. However, the results suggests the presence of a sub-dominant order-parameter component in YBCO that has an appreciable projection along the c-axis.     

Direct injection of spin-polarized carriers across YBa2Cu3O7-δ-La0.3Ca0.7MnO3 interface at 77 K

We report here injection of spin-polarized carriers from a half-metallic La_0.3Ca_0.7MnO₃ (LCMO) colossal magnetoresistive (CMR) thin film into a high-temperature superconducting YBa₂Cu₃O_7-δ (YBCO) thin film studied using a micro-bridge. The LCMO and YBCO films were grown on 〈100〉 LaAlO₃ (LAO) substrate sequentially using pulsed laser deposition (PLD). I-V measurements carried out at 77 K show that while normal critical current, I _c ⁿ , of the micro-bridge is 80 mA, the critical current, I _c ^p , through the micro-bridge when injected from the CMR layer is 38 mA. This clearly shows that spin-polarized quasiparticles injected from the the CMR layer into the YBCO layer suppress the critical current of the superconductor via the pair-breaking phenomena.     

Residual surface stress measurements in YBa2Cu3Ox superconductors

XRD and residual surface stress (sin² ψ) measurements were carried out on YBa₂Cu₃O_x superconductors with varying oxygen stoichiometry (6.3 < x < 7.0). Slopes of the surface strain versus sin² ψ were plotted against oxygen content for certain reflections. Compressional surface stress has been found along the c-axis, while a tensile surface stress has been observed along the ab-plane. Both surface stresses were found to vary slightly with oxygen content. These findings qualitatively agree with a very small hydrostatic pressure effect on T_c for fully oxygenated YBa₂Cu₃O_x (x = 7) compared to oxygen deficient material at the surface.     

Anisotropy of the lattice vibration of Eu and Cu in highTc superconductor Ba2EuCu3O7 analyzed by151Eu and57Fe Mössbauer effects

The anisotropy of superconductivity in highTc superconductors indicates that it is important to clarify the anisotropies of microscopic properties in these materials. In this work, we observed the anisotropy of the lattice vibration ofEu andCu inBa ₂ EuCu ₃ O ₇ by¹⁵¹ Eu and⁵⁷ Fe Mössbauer effect. Thec-axis aligned samples were prepared by healing the mixture of epoxy andBa ₂ EuCu ₃ O ₇ powder in a magnetic field. For⁵⁷ Fe Mössbauer measurement the sample doped with⁵⁷ Fe,Ba ₂ Eu(Cu _0.99 Fe _0.01)₃ O ₇, was used. The temperature dependence of Mössbauer spectrum was measured in two cases,c-axis ‖ γ-ray andc-axis ⊥ γ-ray. The Debye temperature ofEu alongc-axis (230 K) was lower than that inab-plane (265 K). The Debye temperature of⁵⁷ Fe substituted forCu(2) was lower (378 K) alongc-axis than inab-plane (417 K). The Debye temperature of⁵⁷ Fe substituted forCu(1) having no oxygen atom ina-axis was 435 K alongc-axis and 416 K inab-plane. These results are interpreted by the oxygen configuration around the Mössbauer atoms.     

Anisotropic and large low-field magnetic entropy change in a La4/3Sr5/3Mn2O7 single crystal

We have studied the magnetocaloric effect (MCE) in a bilayered La_4/3Sr_5/3Mn₂O₇ single crystal with applied field along both ab-plane and c-direction. Due to the quasi-two-dimensional structure, the crystal exhibits a strong anisotropy in the MCE. The difference of magnetic entropy change between two crystallographic directions depends on external magnetic fields and has a maximum of 2 J/kg K. A large low-field magnetic entropy change, reaching 3.2 J/kg K for a magnetic field change of 15 kOe, is observed when the applied field is along ab-plane. This large low-field magnetic entropy change is attributed to the rapid change of magnetization in response to external magnetic fields in the easy magnetizing plane.     

Magnetic phase diagram and correlation between metamagnetism and superconductivity in Ru<Subscript>0.9</Subscript>Sr<Subscript>2</Subscript>YCu<Subscript>2.1</Subscript>O<Subscript>7.9</Subscript>

The magnetic superconductorRu_0.9Sr₂YCu_2.1O_7.9 (Ru-1212Y) has beeninvestigated using neutron diffraction under variable temperature and magnetic field. Withthe complementary information from magnetization measurements, we propose a magnetic phasediagram T-H for the Ru-1212 system. Uniaxialantiferromagnetic (AFM) order of 1.2μ _B /Ruatoms with moments parallel to the c-axis is found below the magnetictransition temperature at  ~140 K in the absence of magnetic field. In addition,ferromagnetism (FM) in the ab-plane develops below  ~120 K, butis suppressed at lower temperature by superconducting correlations. Externally appliedmagnetic fields cause Ru-moments to realign from the c-axis to theab-plane, i.e. along the ?1,1,0? direction, and induce ferromagnetismin the plane with  ~1μ _B at 60 kOe.These observations of the weak ferromagnetism suppressed by superconductivity and thefield-induced metamagnetic transition between AFM and FM demonstrate not only competingorders of superconductivity and magnetism, but also suggest a certain vortex dynamicscontributing to these magnetic transitions.     

Stabilization of A-type layered antiferromagnetic phase in LaMnO3 by cooperative Jahn-Teller deformations

It is shown that the layered antiferromagnetic order in stoechiometric cannot be understood purely from electronic interactions. On the contrary, it mainly results from strong cooperative Jahn-Teller deformation. Those involve a compression of the Mn-O octahedron along the c-axis (mode Q ₃ < 0), while alternate Jahn-Teller deformations occur in the ab-plane (mode Q₂). These deformations stabilize a certain type of orbital ordering. The resulting superexchange couplings are calculated by exact diagonalization, taking into account both e_g and t_2g orbitals. The main result is that antiferromagnetic (ferromagnetic) coupling along the c-direction (ab-planes) can be understood only if the Jahn-Teller energy is much larger than the superexchange couplings, which is consistent with experiments. This mechanism contrasts with that based on weak Jahn-Teller coupling which instead predicts elongation along the c-axis (Q ₃ > 0). The crucial role of the deformation anisotropy is also emphasized. Received 24 January 2000     

On the high-resistivity contacts to YBa2Cu3O7 thin films, electrical behavior in the regime of high temperatures and high-bias voltages

We prepared in-situ Au contacts on high-quality epitaxial YBa₂Cu₃O₇ (YBCO) films. Very high specific contact resistivity values up to ∼10⁻² Ω cm² at 4.2 K were obtained on 12×5 μm² contact areas. This resistivity value decreased by two orders of magnitude as the temperature was raised to room temperature. In the temperature range T<200 K, the contacts showed non-ohmic behavior suggesting the presence of a well-defined insulating native Y-Ba-Cu-O barrier between the two electrodes. The electrical transport in this barrier layer was analyzed in the limit of high temperatures and high voltages to follow Mott's variable-range hopping conduction mechanism with physically reasonable parameters describing the localized states in the barrier. The high-resistivity contacts were tested successfully in quasiparticles injection experiments where the critical current I_c of the YBCO microbridge could be strongly suppressed on injection of an additional current through the contact into the superconducting channel.     

Preparation of YBCO film for microwave filter using a hybrid route

Pure (0 0 l)-textured CeO₂ buffer layers were deposited on single crystal r-plane Al₂O₃ (1–102) substrate by a hybrid process which was combined with magnetron sputtering for the seed layer and metal–organic deposition for the subsequent layer. Strongly c-axis oriented YBCO films were deposited on the CeO₂ buffered r-cut Al₂O₃ (1–102) substrates. Atomic force microscope and scanning electronic microscopy results show that the prepared buffers and YBCO films are relatively dense and smooth. The critical current of the YBCO films exceeds 1.5 MA/cm² at 77 K with the superconducting transition temperature of 90 K. The surface resistivity is as below as 14 μΩ at 1 GHz frequency. The results demonstrate that the hybrid route is a very promising method to prepare YBCO films for microwave application, which can combine the sputtering advantage for preparing of highly c-axis oriented CeO₂ buffer layers and the advantages of metal–organic deposition with rapid processing, low cost and easy preparation of large-area YBCO films.     

A search for extra lattice distortions associated with the superconductivity and the charge inhomogeneities in the high-Tc La1.85Sr0.15CuO4 system

Precise measurements of the temperature-dependent lattice parameters in a single crystal of La_1.85Sr_0.15CuO₄ are made by X-ray bond method and analyzed comparing the normal thermal expansion term, proportional to T⁴. A spontaneous lattice contraction of about 2.3×10⁻⁵ Å was found in the ab-plane, while along the c-axis a small expansion of about 1.5×10⁻⁵ Å was observed below the superconducting transition temperature of the system, showing some correlation between the structure and the high-T_c superconductivity. A careful search has been made for existence of any extra lattice distortion above the T_c, that might be associated with the stripe inhomogeneities in the title system, however, within the experimental sensitivity we could not find such distortions.     

First-principles calculations for anisotropy of iron-based superconductors

We perform first-principles calculations for anisotropy of various iron-based superconductors. The anisotropy ratio γ_λ of the c-axis penetration depth to the ab-plane one is relatively small in BaFe₂As₂, LiFeAs and FeSe, indicating that the transport applications are promising in these superconductors. On the other hand, in those having perovskite-type blocking layers such as Sr₂ScFePO₃ we find a very large value, γ_λ ? 200, comparable to that in strongly anisotropic high-T_c cuprate Bi₂Sr₂CaCu₂O_8−δ. Thus, the intrinsic Josephson junction stacks are expected to be formed along the c-axis, and novel Josephson effects due to the multi-gap nature are also suggested in these superconductors. We also examine the doping effect on the anisotropy of LaFeAsO.     

Superconducting Transition Temperature and Metal--Semiconductor Transition Temperature in YBa2Cu4O8/La0.67Ca0.33MnO3/YBa2Cu4O8 Trilayer Films

YBa₂Cu₄O₈/La_0.67Ca_0.33MnO₃/YBa₂Cu₄O₈(YBCO/LCMO/YBCO) trilayer films were prepared by magnetron facing-target sputtering. For the first time, the oscillatory behaviour of superconducting transition temperature T_c,ON with the thickness of LCMO (d_L) has been observed. The strongest nonmonotonic information in the T_c,ON--d_L curves appears clearly when d_L is larger than the critical thickness d_L^CR. The metal--semiconductor transition temperature can only be detected at d_L>d_L^CR. The dependence on the ferromagnetic spacer layer in YBCO/LCMO/YBCO systems suggests strongly the interplay of ferromagnetic and superconducting couplings.     

Phase diagram of Fe(1−x)CoxCl2; a random mixture of two antiferromagnets with competing spin anisotropies

Concentration vs transition temperature phase diagram of a random mixture of two anisotropic antiferromagnets, FeCl₂ and CoCl₂, is obtained from the measurement of the susceptibility on the single crystals. Two distinct critical points, one along the c-axis and the other in the c-plane, are observed for the respective concentrations between x = 0.264 and x = 0.481. Three kinds of ordered phases, namely, Fe-rich and Co-rich antiferromagnetic phases and a new phase are found. The phase diagram shows a tetracritical point as well.A hump is observed in the temperature dependence of the susceptibility along the c-axis (c-plane for x ? 0.3) near the ordering temperature occuring in the c-plane (c-axis for x ? 0.3).     

Crystal orientation dependence of the critical current density in a-axis- and c-axis-oriented MgB2 films

We have investigated the critical current density for MgB₂ films having various crystal orientations prepared by using a hybrid physical-chemical vapor deposition system. An enhancement of the critical current density is clearly presented in MgB₂ films with an a-axis or a b-axis orientation rather than a c-axis orientation. X-ray diffraction patterns reveal a suppression of c-axis orientations while a (100) orientation becomes dominant, and the surface morphology of the a-axis-oriented film shows that the orientation of the c-axis-oriented MgB₂ grains parallel to the plane of the substrate. As the a-axis orientation becomes more dominant in the MgB₂ films, the field performance of the critical current density clearly becomes better. These results suggest that the synthesis of MgB₂ with high ab-plane orientations is one of the keys to enhancing the critical current density in MgB₂.     

Mössbauer study of the magnetic structure of FeP

The compound FeP shows, at low temperatures and in zero external magnetic field, a helical spin configuration for iron with a propagation vector along the c-axis as deduced from neutron diffraction studies. We have performed ⁵⁷Fe Mössbauer measurements in the temperature interval between 295 K and 4.2 K and in an external magnetic field on both powder specimen and single crystals of FeP. The results show a nearly temperature independent electric quadrupole interaction strength eQV_zz of 1.34 mm/s and a Néel temperature of 115 K. It was, however, impossible to fit the Mössbauer spectra below T_N using a simple double spiral model. Instead a bunched spiral model with the spins crowded along the a-axis gave very good fits. The magnetic hyperfine field was furthermore found to be modulated in the ab-plane. The maximum field of +3.6 T was found along the a-direction while the overall field, presumably spread over all other directions, was 0.2 T. The measurements in external magnetic field showed that the grains become partially oriented with the basal plane parallel to the external field.     

Optical properties of FeAs-based parent compound: A comparative study for polycrystalline EuFe2As2 and LaFeAsO

We report on a comparative optical investigation on EuFe₂As₂ and LaFeAsO polycrystalline samples. The spin-density wave (SDW) partial gap is observed for both compounds. The gap-like absorption peaks in the real part of conductivity for EuFe₂As₂ and LaFeAsO scale with their respective T _SDW. Most remarkably, the study reveals a substantial difference in optical reflectance spectra for the two prototype compounds of 122 and 1111 systems: EuFe₂As₂ shows a much higher reflectivity with fewer phonon modes than that of LaFeAsO. This yields optical evidence for much stronger anisotropy between ab-plane and c-axis in 1111-type compounds.     

Localized versus itinerant electrons in hexagonal FeGe

Hexagonal FeGe is a metallic antiferromagnet with T_N = 411K. At higher temperatures FeGe is a uniaxial antiferromagnet with spins parallel to the c-axis and ferromagnetic alignment within each c-plane. Susceptibility and magnetization measurements show that the spins leave the c-axis below 30K. From the molecular field model (MF) we propose that the spins then form a double cone structure. The spin components parallel to the c-axis retain the uniaxial structure while the c-plane components have a turn angle in the vicinity of 180° between neighbour planes, which implies absence of long range order. The MF results are in good agreement with Fermi surface calculations, which show the existence of several spin density wave vectors in the vicinity of $\text{Q =}\text{π}\text{c}$, thus explaining the indeterminacy of the turn angle in the MF model.