Interaction of 2,2,6,6-tetramethyl-3,5-heptanedione with the Si(1 0 0)-2 × 1 surface: Scanning tunneling microscopy and density functional theory study

Room temperature adsorption and reaction of 2,2,6,6-tetramethyl-3,5-heptanedione (dpmH) on the Si(1 0 0)-2 × 1 surface has been studied with ultra-high vacuum scanning tunneling microscopy (UHV-STM) and temperature programmed desorption (TPD). The molecule is found to chemisorb as a mixture of at least five distinct species. Density functional theory (DFT) was used to calculate the structures and adsorption energies of 12 possible addition products. Unique bonding assignments for each experimental feature are proposed by consideration of a common intermediate reaction network, and a comparison of possible reaction pathways leading to the final products. These assignments are: OH inter-dimer dissociation, OH intra-dimer dissociation, 1,5 intra-dimer addition, 1,5 inter-dimer addition, and intra-dimer [2 + 2]CO addition with OH dissociation on an adjacent dimer. TPD and STM results show that the molecule dissociates completely upon annealing to 700 °C with formation of the c(4 × 4) phase at low exposures, and SiC islands for exposures exceeding 0.15 L.     

Desorption of chlorine atoms on Si (1 1 1)-(7 × 7) surfaces induced by hole injection from scanning tunneling microscope tips

We investigated desorption of chlorine atoms on Si (1 1 1)-(7 × 7) surfaces induced by hole injection from scanning tunneling microscope tips. The hole-induced desorption of chlorine atoms had a threshold bias voltage corresponding to the energy position of the S3 surface band originated in Si backbonds. The chlorine atom desorption rate was almost proportional to the square of the tunneling current. We have discussed possible mechanisms that two holes injected into Si surface states get localized at the backbonds of chlorinated Si adatoms, which induces the rupture of Cl-Si bonds to result in chlorine atom desorption.     

Nano-crater formation on a Si(1 1 1)-(7 × 7) surface by slow highly charged ion-impact

Using scanning tunneling microscopy (STM) and time of flight secondary ion mass spectrometry (TOF/SIMS), we observed radiation effects on a Si(1 1 1)-(7 × 7) surface in the collision of a single highly charged ion (HCI) with a charge state q up to q = 50. The STM observation with atomic resolution revealed that a nanometer sized crater-like structure was created by a single HCI impact, where the size increased rapidly with q. The secondary ion yields also increased with q in which multiply charged Si ions (Siⁿ⁺) were clearly observed in higher q HCI-collisions. The sputtering mechanism is briefly discussed, based on the so-called Coulomb explosion model.     

Substantially low desorption barriers in recombinative desorption of deuterium from a Si(1 0 0) surface

We have studied desorption kinetics of deuterium molecules from a Si(1 0 0) surface by means of temperature-programmed desorption (TPD) spectra and isothermal desorptions.Three desorption components, denoted as β_1,A,β_1,B, and C, can be distinguished in semi-logarithmic plots of the TPD spectra.Their peak positions and intensities are strongly affected by the surface preparation methods employed, either with or without annealing to control the initial D coverage .Peak C appears at the leading edge of the TPD peak.It accounts for only about 5% of the TPD peak at and it diminishes rapidly with decreasing , vanishing at .In contrast, together the β_1,A and β_1,B peaks account for the whole TPD peak at any less than 1.0 ML. The maximum of the β_1,A peak is nearly constant at around the maximum temperature of the TPD peak.On the other hand, the β_1,B peak appears on the high-temperature side of the TPD peak and it systematically shifts to higher temperatures with decreasing .These results imply that first- and second-order kinetics are operating for the β_1,A and β_1,B desorptions, respectively.Isothermal desorption experiments confirm the above predicted kinetics for a limited region, namely .From the results for the rate curve analysis, the desorption barriers are evaluated to be 1.6 ± 0.1 eV and 1.8 ± 0.1 eV for the β_1,A and β_1,B desorptions, respectively.These values are substantially lower than the widely accepted value of ∼2.5 eV. To reproduce the measured TPD spectra we take the Arrhenius-type rate equation containing the first- and second-order rate terms for the β_1,A and β_1,B desorptions.The TPD spectra measured for can be reasonably fit with the proposed rate equation when the values given above for E_d,A and E_d,B are used. For , however, the TPD curves are not fit with the same values; rather, the best-fit curves require values for E_d,A and E_d,B larger than those given above. Combining the present kinetics results with those obtained by STM along with the studies, the β_1,A and β_1,B peaks may be attributed to desorption along the 2H path, while peak C may be attributed to desorption along the 4H path. The atomistic desorption mechanism as well as the energy relationship between the desorption barrier and isosteric heat of adsorption are discussed.     

Scanning tunneling microscopy investigation of clean (2 1 1) surface of Ta and Mo

Scanning tunneling microscopy was used to obtain images from clean (2 1 1) surfaces of Ta and Mo under the same ultrahigh vacuum conditions. In the case of tantalum the surface is very rough, and single extending atomic chains reach distances up to 100 Å. Those furrows are a surface reconstruction based on creation of (1 1 0) “micro-facets” along the [1 1 1] direction or (1 1 1)fcc micro-facets with a more dense structure than (1 1 0)bcc plane. In contrast, the (2 1 1) surface of Mo is smooth, and single atomic rows are visible on high resolution STM images. Step bunching occurs on the Mo surface, reducing the number of terrace edges.     

Hopping motion of chlorine atoms on Si(1 0 0)-(2 × 1) surfaces induced by carrier injection from scanning tunneling microscope tips

Injection of tunneling electrons and holes from the probe tips of a scanning tunneling microscope was found to enhance the hopping motion of Cl atoms between neighboring dangling-bond sites of Si dimers on Si(1 0 0)-(2 × 1) surfaces, featured by the rate of hopping linearly dependent on the injection current. The hopping rate formed peaks at sample biases of V_S∼+1.25 and −0.85 V, which agree with the peaks in the local density of states spectrum measured by scanning tunneling spectroscopy. The Cl hopping was enhanced at Cl-adsorbed sites even remote from the injection point. The Cl hopping by hole injection was more efficiently enhanced by sweeping the tip along the Si dimer row than by tip-sweeping along the perpendicular direction. Such anisotropy, on the other hand, was insignificant in the electron injection case. All of these findings can be interpreted by the model that the holes injected primarily into a surface band originated from the dangling bonds of Si dimers propagate quite anisotropically along the surface, and become localized at Cl sites somehow to destabilize the Si-Cl bonds causing hopping of the Cl atoms. The electrons injected into a bulk band propagate in an isotropic manner and then get resonantly trapped at Si-Cl antibonding orbitals, resulting in bond destabilization and hopping of the Cl atoms.     

A density-functional study on the atomic geometry and adsorption of the Cu(1 0 0) c(2 × 2)/N Surface

In this work we have performed total-energy calculations on the geometric structure and adsorption properties of Cu(1 0 0) c(2 × 2)/N surface by using the density-functional theory and the projector-augmented wave method. It is concluded that nitrogen atom was adsorbed on a FFH site with a vertical distance of 0.2 Å towards from surface Cu layer. The bond length of the shortest Cu-N bonding is calculated to be 1.83 Å. Geometry optimization calculations exclude out the possibilities of adsorbate induced reconstruction mode suggested by Driver and Woodruff and the atop structural model. The calculated workfunction for this absorbate-adsorbent system is 4.63 eV which is quite close to that of a clean Cu(1 0 0) surface. The total-energy calculations showed that the average adsorption energy per nitrogen in the case of Cu(1 0 0) c(2 × 2)-N is about 4.88 eV with respect to an isolated N atom. The absorption of nitrogen on Cu(1 0 0) surface yields the hybridization between surface Cu atoms and N, and generates the localized surface states at −1.0 eV relative to Fermi energy E_F. The stretch mode of the adsorbed nitrogen at FFH site is about 30.8 meV. The present study provides a strong criterion to account for the local surface geometry in Cu(1 0 0) c(2 × 2)/N surface.     

Olefin bonding mechanism and growth to (1 0 0)(2 × 1):H diamond

The bonding and growth mechanism of photochemically attached olefin molecules to (1 0 0)(2 × 1):H diamond is characterized using atomic force (AFM) and scanning tunneling microscopy (STM) experiments in combination with molecular orbital calculations. To identify growth schemas, diamond surfaces after 10, 40 and 90 min of photo-chemically stimulated growth have been characterized. These data show clearly island formation which is discussed taking into account a growth model from silicon. The island growth shows no directional properties which are attributed to arrangement and geometrical properties of hydrogen terminated carbon bonds at the surface of (1 0 0) oriented (2 × 1) reconstructed diamond.     

Growth of In nanocrystallite arrays on the Si(1 0 0)-c(4 × 12)-Al surface

Using scanning tunneling microscopy, growth of In nanoisland arrays on the Si(1 0 0)-c(4 × 12)-Al surface has been studied for In coverage up to 1.1 ML and substrate temperature from room temperature to 150 °C. In comparison to the case of In deposition onto the clean Si(1 0 0) surface or Si(1 0 0)4 × 3-In reconstruction, the In growth mode is changed by the c(4 × 12)-Al reconstruction from the 2D growth to 3D growth, thus displaying a vivid example of the Volmer-Weber growth mode. Possible crystal structure of the grown In nanoislands is discussed.     

Simplified method to prepare atomically-ordered TiO2(1 1 0)-(1 × 1) surfaces with steps and terraces

An effective way to prepare atomically-ordered rutile TiO₂(1 1 0) surfaces that have distinct step and terrace structures suitable for oxide thin film deposition is demonstrated. Only a two-step procedure, consisting of 20% HF etching and UHV-annealing at 1100 °C, was required to yield a clean (1 × 1) structure with step and terrace structures. Investigation of the surface using scanning tunneling microscopy, low-energy electron diffraction, and Auger electron spectroscopy reveals that carbon contamination is removed at around 800 °C, and straight steps with clear terraces appear at around 1000 °C.     

Templated growth of quasi-one dimensional molecular structures on Si(1 1 1)-(4 × 1)-In surface

Self-assembly of quasi-one dimensional pentacene molecular chains are realized on Si(1 1 1) surface using the atomic chain structures of the well-defined Si(1 1 1)-(4 × 1)-In surface reconstruction as templates. It is determined that the molecules are adsorbed between two neighboring In chains with their long axis perpendicular to the chain direction. The molecular chains are grown with periodicity commensurate with the lattice constant in the In atomic chains. Our positive results suggest that this approach might be applied to grow organic hetero-nanostructures on specifically decorated semiconductor surfaces.     

Structural study of Si(1 1 1)-6 × 1-Ag surface using surface X-ray diffraction

The surface structure of Si(1 1 1)-6 × 1-Ag was investigated using surface X-ray diffraction techniques. By analyzing the CTR scattering intensities along 00 rod, the positions of the Ag and reconstructed Si atoms perpendicular to the surface were determined. The results agreed well with the HCC model proposed for a 3 × 1 structure induced by alkali-metals on a Si(1 1 1) substrate. The heights of the surface Ag and Si atoms did not move when the surface structure changed from Si(1 1 1)-√3 × √3-Ag to Si(1 1 1)-6 × 1-Ag by the desorption of the Ag atoms. From the GIXD measurement, the in-plane arrangement of the surface Ag atoms was determined. The results indicate that the Ag atoms move large distances at the phase transition between the 6 × 1 and 3 × 1 structures.     

Germanium growth on Br-terminated Si(1 0 0)

The consequences of Ge deposition on Br-terminated Si(1 0 0) were studied with scanning tunneling microscopy at ambient temperature after annealing at 650 K. One monolayer of Br was sufficient to prevent the formation of Ge huts beyond the critical thickness of 3 ML. This is possible because Br acts as a surfactant whose presence lowered the diffusivity of Ge adatoms. Hindered mobility was manifest at low coverage through the formation of short Ge chains. Further deposition resulted in the extension and connection of the Ge chains and gave rise to the buildup of incomplete layers. The deposition of 7 ML of Ge resulted in a rough surface characterized by irregularly shaped clusters. A short 800 K anneal desorbed the Br and allowed Ge atoms to reorganize into the more energetically favorable “hut” structures produced by conventional Ge overlayer growth on Si(1 0 0).     

Early stages of vanadium deposition on Si(1 1 1)-7 × 7

We investigate the low-coverage regime of vanadium deposition on the Si(1 1 1)-7 × 7 surface using a combination of scanning tunnelling microscopy (STM) and density-functional theory (DFT) adsorption energy calculations. We theoretically identify the most stable structures in this system: (i) substitutional vanadium atoms at silicon adatom positions; (ii) interstitial vanadium atoms between silicon adatoms and rest atoms; and (iii) interstitial vanadium - silicon adatom vacancy complexes. STM images reveal two simple vanadium-related features near the Si adatom positions: bright spots at both polarities (BB) and dark spots for empty and bright spots for filled states (DB). We relate the BB spots to the interstitial structures and the DB spots to substitutional structures.     

Study of vacancy on diamond (1 0 0) (2 × 1) surface from first-principles

Structure and energy related properties of neutral and charged vacancies on relaxed diamond (1 0 0) (2 × 1) surface were investigated by means of density functional theory. Calculations indicate that the diffusion of a single vacancy from the top surface layer to the second layer is not energetically favored. Analysis of energies in charged system shows that neutral state is most stable on diamond (1 0 0) (2 × 1) surface. The multiplicity of possible states can exist on diamond (1 0 0) surface in dependence on the surface Fermi level, which supports that surface diffusion of a vacancy is mediated by the change of vacancy charge states. Analysis of density of states shows surface vacancy can be effectively measured by photoelectricity technology.     

Chemisorption of 1,1-dichloroethene on the Si(1 1 1)-7 × 7 surface

Chemisorption of 1,1-dichloroethene (Cl₂CCH₂) to a Si(1 1 1)-7 × 7 surface was studied by means of X-ray photoelectron spectroscopy using synchrotron radiation, recording chlorine 2p and carbon 1s spectra. For carbon 1s, spectral assignment of the chemisorbed species is based on quantum chemical calculations of chemical shifts in model compounds.The results confirm the identity of covalently bonded 1-chlorovinyl (-CClCH₂) and vinylidene (CCH₂) adspecies. Upon chemisorption at room temperature it was found that about one-third of the molecules break one C-Cl bond while about two-thirds of the adsorbates break two C-Cl bonds. We do not, however, find evidence for isomerization of CCH₂ to di-bonded vinylene (-CHCH-).     

Theoretical STM images of alkaline-earth metal adsorbed Si(1 1 1)3 × 2 surfaces

We have performed total-energy calculations to study theoretical scanning tunneling microscopy (STM) images of the Si(1 1 1)3 × 2 surfaces induced by the adsorption of alkaline-earth metals (AEMs). Previously, in a series of works on Ba/Si(1 1 1) system, we have found that the observed Si(1 1 1)3 × 1-Ba LEED phase indeed has a 3 × 2 periodicity with a Ba coverage of 1/6 ML and the HCC substrate structure. Based on results of the Ba case, we proposed that the HCC structure is also adopted for other AEM atoms, which was confirmed by our recent work. In this paper, we mainly report the STM simulations for different AEM systems to compare with existing experimental data. We discuss the difference in the detailed STM images for different AEM adsorbates. Especially, the difference in filled-state images between Mg and other AEM atoms is attributed to the strong Mg-Si interaction.     

Effects of electronic confinement and substrate on the low-temperature growth of Pb islands on Si(1 0 0)-2 × 1 surfaces

The growth of Pb films on the Si(1 0 0)-2 × 1 surface has been investigated at low temperature using scanning tunneling microscopy. Although the orientation of the substrate is (1 0 0), flat-top Pb islands with (1 1 1) surface can be observed. The island thickness is confined within four to nine atomic layers at low coverage. Among these islands, those with a thickness of six layers are most abundant. Quantum-well states in Pb(1 1 1) islands of different thickness are acquired by scanning tunneling spectroscopy. They are found to be identical to those taken on the Pb(1 1 1) islands grown on the Si(1 1 1)7 × 7 surface. Besides Pb(1 1 1) islands, two additional types of Pb islands are formed: rectangular flat-top Pb(1 0 0) islands and rectangular three-dimensional (3D) Pb islands, and both their orientations rotate by 90° from a terrace to the adjacent one. This phenomenon implies that the structures of Pb(1 0 0) and 3D islands are influenced by the Si(1 0 0)-2 × 1 substrate.     

Scanning tunneling microscopy luminescence from nanoscale surface of GaAs(1 1 0)

Scanning tunneling microscopy luminescence (STML) was induced from the nanometer scale surfaces of cleaved n-type and p-type GaAs(1 1 0) wafers by using of an ITO-coated optical fiber probe in an ultrahigh-vacuum chamber. The STML from n-type GaAs(1 1 0) surface was induced under negative sample bias when the applied bias exceeds a threshold voltage around −1.5 V. Whereas the STML from p-type GaAs(1 1 0) surface was induced under positive sample bias when the applied bias exceeds a threshold voltage around +1.5 V. The excitation energies at the threshold voltages are consistent with the band gap of GaAs (1.42 eV) at 295 K. The typical quantum efficiencies for n-type and p-type GaAs are about 3 × 10⁻⁵ and 2 × 10⁻⁴ photons/electron, respectively. The observed STML from are attributed to a radiative recombination of electron-hole pairs generated by a hole injection for n-type GaAs under negative sample bias and an electron injection for p-type GaAs under positive sample bias, respectively.     

Halogen chemisorption, the pairwise diffusion of I, and trapping by defects on Si(1 0 0)

Halogen molecules dissociatively chemisorb on Si(1 0 0)-(2 × 1), and the bonding structures that they adopt can be elucidated with scanning tunneling microscopy. Of the Cl, Br, and I group, Cl has the highest single atom diffusion barrier, and both single and paired adatoms are observed at 295 K. The barrier is smaller for Br, and the adatoms can interrogate the surface until they form pairs, which are then immobile, or are trapped at C-type defects. The barrier is smallest for I, allowing the formation of pairs and trapped states, but the pairs are mobile at ambient temperature. Their motion is thermally activated, the events are random, and the diffusivities along and across the dimer row are ∼0.42 and ∼0.17 Å²/s at 295 K. The respective energy barriers for pairwise diffusion are ∼0.76 and ∼0.82 eV, assuming an attempt frequency of 10¹² s⁻¹. Studies over long times reveal that pairwise diffusion at low coverage is ultimately quenched by the increasing density of C-type defects, i.e. the increasing amounts of dissociated H₂O.