The unusual magnetic and electronic properties of Gd0.5Ba0.5CoO2.9

Magnetic and electrical properties of well-characterized Gd_0.5Ba_0.5CoO_2.9 have been studied carefully in order to compare them with those of other analogous cobaltates of the type Ln_0.5A_0.5CoO₃ (Ln=La, Nd and A=Sr, Ba) which are ferromagnetic. The results show that Gd_0.5Ba_0.5CoO_2.9, which has A-site cation ordering at room temperature, does not become a genuine ferromagnet at low temperatures, but the ferromagnetic interactions observed at 280 K give over to an antiferromagnetic (AFM) state on cooling to 230 K. The AFM state is rendered ferromagnetic on the application of high magnetic fields. The properties can be understood on the basis of phase separation induced by the large A-site cation-disorder, arising from the size mismatch.     

Magnetic and structural studies of the alloy system REIn0.5Ag0.5

The structural and magnetic properties of the alloy system REIn_0.5Ag_0.5 [RE = Gd, Tb, Dy, Ho, Er, Tm and Yb] are reported. All these alloys (except that of Yb) crystallize in a cubic CsCl type structure at room temperature. Low temperature X-ray diffraction data does not reveal any structural phase transformation down to 8 K. On the basis of magnetic susceptibility data at a different temperature (3–300 K) and applied magnetic field (2 × 10⁵ to 8 × 10⁶ A m^-1, it has been concluded that GdIn_0.5Ag_0.5 is ferromagnetic (T_c = 118 K), TbIn_0.5Ag_0.5 and DyIn_0.5Ag_0.5 are meta magnetic (T_N = 66 and 30 K, respectively) and alloys involving Ho, Er, Tm and Yb are ferrimagnetic with Néel temperatures (T_N) equal to 24, 22, 21 and 20 K, respectively. The evaluated effective magneton number (p) is found to be slightly larger compared to theoretical values for tripositive ions of Gd, Tb and Dy and a bit smaller for Ho, Er, Tm and Yb. The results have been qualitatively explained using appropriate theories.     

Structural phase transitions and sodium ordering in Na0.5CoO2: a combined electron diffraction and Raman spectroscopy study

The nonstoichiometric Na_xCoO₂ system exhibits extraordinary physical properties that correlate with temperature and Na concentration in its layered lattice without evident long-range structure modification when conventional crystallographic techniques are applied. For instance, Na_0.7CoO₂, a thermodynamically stable phase, shows large thermoelectric power; water-intercalated Na_0.33CoO₂·1.3H₂O is a newly discovered superconductor with T_c∼4 K, and Na_0.5CoO₂ exhibits an unexpected charge ordering transition at around T_co∼55 K. Recent studies suggest that the transport and magnetic properties in the Na_xCoO₂ system strongly depend on the charge carrier density and local structural properties. Here we report a combined variable temperature transmission electron microscopy and Raman scattering investigation on structural transformations in Na_0.5CoO₂ single crystals. A series of structural phase transitions in the temperature range from 80 to 1000 K are directly identified and the observed superstructures and modulated phases can be interpreted by Na-ordering. The Raman scattering measurements reveal phase separation and a systematic evolution of active modes along with phase transitions. Our work demonstrates that the high mobility and ordering of sodium cations among the CoO₂ layers are a key factor for the presence of complex structural properties in Na_xCoO₂ materials, and also demonstrate that the combination of electron diffraction and Raman spectroscopy measurements is an efficient way for studying the cation ordering and phase transitions in related systems.     

Glassy-ferromagnetic behavior in Eu0.5Sr0.5CoO3

Polycrystalline perovskite cobalt oxide Eu_0.5Sr_0.5CoO₃ was prepared by the conventional solid-state reaction method. X-ray powder patterns indicated the prepared samples are pure, cubic perovskite structure (Pm3?m), and with no evidence of any secondary phases. The dc magnetization and ac susceptibility measurements were carried out to investigate the magnetic properties of the sample, and which indicated that cluster-glasses properties are suppressed with the increasing of the coercive field. We denied the possibility of spin-glasses and the existence of the Hopkinson effect in Eu_0.5Sr_0.5CoO₃ through the temperature-dependent ac susceptibility measurements, and explained the magnetic behavior of Eu_0.5Sr_0.5CoO₃ with the competition between magnetic anisotropy and the external magnetic field.     

Effect of Mo doping on magnetic and transport properties of La0.5Sr0.5CoO3

The substitutional effect of Mo on the magnetic and transport properties of double exchange ferromagnets, La_0.5Sr_0.5Co_1−x Mo_xO₃ (0?x?0.2) has been investigated. Substitution of 10% Mo at the Co-site of La_0.5Sr_0.5CoO₃ decreases the Curie temperature by ∼60 K than that of the parent compound and the long-range ferromagnetic ordering disappears for x?0.2. The Mo-doped samples, however, undergo a transition from the parent metallic state to the insulating state below T_c. The insulating state is found to obey Mott's variable range hopping of conduction. The effect of Mo substitution is attributed to the factors namely, (i) the dilution of magnetic Co sublattice, (ii) the reduction of Co⁴⁺/Co³⁺ ratio resulting in a reduced carrier concentration and (iii) disruption of the intermediate spin structure of Co, namely Co³⁺: t_2g⁵e_g¹.     

Thermal, electrical, and electrochemical properties of Lanthanum-doped Ba0.5Sr0.5 Co0.8Fe0.2O3-δ

Crystal structure, thermogravimetry (TG), thermal expansion coefficient (TEC), electrical conductivity and AC impedance of (Ba_0.5Sr_0.5)_1-xLa_xCo_0.8Fe_0.2O_3-δ (BSLCF; 0.05?x?0.20) were studied in relation to their potential use as intermediate temperature solid oxide fuel cell (IT-SOFC) cathode. A single cubic pervoskite was observed by X-ray diffraction (XRD). The TEC of BSLCF was increasing slightly with the increasing content of La, and all the compounds showed abnormal expansion at high temperature. Proved by the TG result, it was associated with the loss of lattice oxygen. The electrical conductivity, which is the main defect of Ba_0.5Sr_0.5 Co_0.8Fe_0.2O_3-δ (BSCF), was improved by La doping, e.g., the compound of x=0.20 demonstrated a conductivity of σ=376 S cm⁻¹ at 392 °C. The increase of electrical conductivity resulted from the increased concentration of charge carrier induced by La doping. In addition, the AC impedance revealed the better electrochemical performance of BSLCF. For example, at 500 °C, the sample with composition x=0.15 yielded the resistance values of 2.12 Ω cm², which was only 46% of BSCF.     

Fabrication and characterization of epitaxial Sr0.6Ba0.4Nb2O6/La0.7Sr0.3CoO3 heterostructures

Epitaxial Sr_0.6Ba_0.4Nb₂O₆(SBN60)/La_0.7Sr_0.3CoO₃ heterostructures were fabricated on LAO(0 0 1) substrates using pulsed laser deposition (PLD). Their structural properties were investigated by X-ray diffraction. The θ-2θ scans showed single crystalline Sr_1−xBa_xNb₂O₆ (SBN) and La_xSr_1−xCoO₃ (LSCO) layers with a 〈0 0 1〉 orientations perpendicular to the substrate plane. Phi scans on the (2 2 1) plane of SBN layer indicated that the films have two in-plane orientations with respect to the substrate. The SBN unit cells were rotated in the plane of the film by ±18.4° as well as ±45° with respect to the LAO substrate. This rotation was explained by considering the lattice matching between films and substrate, and minimization of electrostatic energy. Spectroellipsometry (SE) was used to characterize the depth profile, the microstructural inhomogeneities, including voids and surface roughness, refractive indices and extinction coefficients of the films.     

Short- and long-range order in La1−xSrxCoO3 and La1−xBaxCoO3

The short- and long-range order correlations of the crystal structure in the distorted perovskites La_1−xSr_xCoO₃ and La_1−xBa_xCoO₃ (0.0?x?0.5) have been studied by the neutron powder diffraction (NPD) and the Co K-edge X-ray absorption spectroscopy (XAS) measurements. The results of XAS and NPD indicate a local distortion around the Co³⁺ ions in LaCoO₃ at room temperature. The substitution of the La³⁺ ions by the Sr²⁺(Ba²⁺) ions leads to a gradual increase of the Co-O-Co angle and is accompanied by an increase of the mean square relative displacement (MSRD) of the Co-O bond. These results correlate with an increase of the oxygen amplitude vibration in the direction perpendicular to the Co-O bond. The possible explanation of the observed changes of the crystal and electronic structures in the above-mentioned cobaltites is discussed.     

Effects of Li2CO3 on the sintering behavior and piezoelectric properties of Bi2O3-excess (Bi0.5Na0.5)0.94Ba0.06TiO3 ceramics

(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ ceramics doped with Li₂CO₃ and Bi₂O₃ as sintering aids were manufactured, and their micro structural, dielectric and piezoelectric properties were investigated. All specimens could be well sintered at a low-temperature of 1080 °C. The bulk density of the specimens doped with a small amount of Li₂CO₃ was enhanced. The dielectric and piezoelectric properties of ceramics were investigated with different amounts of Li₂CO₃ substitutions. High electrical properties of d₃₃ = 167 pC/N, k_p = 0.34, P_r = 40 μC/cm² and E_c = 38 kV/cm were obtained from the specimen containing 0.1 mol% of Li₂CO₃ sintered at 1080 °C.     

Estimating the cation distributions in the spinel ferrites Cu0.5−xNi0.5ZnxFe2O4 (0.0≤x≤0.5)

Ferrite samples of the composition Cu_0.5−xNi_0.5Zn_xFe₂O₄ (0.0≤x≤0.5) were synthesized by chemical co-precipitation. The samples exhibited a single phase cubic spinel structure, and the saturation magnetization of the samples was found to increase with increasing Zn content. Using a quantum mechanical method proposed by our group, the cation distributions in the samples were estimated. Estimated cation distributions obtained by fitting the magnetic moments of the samples were then used to perform Rietveld fitting for X-ray diffraction patterns. The acceptable error parameters in the Rietveld fitting indicate that the estimated cation distributions in the samples are reasonable.     

Model spectral function and superconductivity in BaxK1−xBiO3 (x=0.5-0.7)

The Eliashberg spectral density function is constructed for the superconducting compound Ba_xK_1−xBiO₃ with x=0.5, 0.6, 0.7. The functions, besides yielding some prominent structures, show widely spreading spectra that inhibit lattice instability by yielding not too large values of λ(<1.32). The resulting spectral functions show similar shape as other results, where available, and also successfully reproduce the observed critical temperature, isotope exponent, gap ratio and several other parameters.     

Effect of bismuth deficiency on structure and electrical properties of (Na0.5Bi0.5)0.93Ba0.07TiO3 ceramics

(Na_0.5Bi_x)_0.93Ba_0.07TiO₃ (x=0.500-0.492) ceramics were prepared by a citrate method, and the structure and electrical properties of the ceramics were investigated with respect to the amount of Bi deficiency. It was detected that the Bi deficiency had a considerable impact on the crystal structure and microstructure. The inspection of both the temperature dependence of the dielectric properties (free permittivity ε₃₃^T/ε₀ and dielectric loss tan δ) and the evolution of the polarization-electrical field (P-E) hysteresis loops with measuring temperature suggests that the Bi deficiency served to increase the depolarization temperature (T_d). The Bi deficiency led to an increase in the coercive field (E_c) and mechanical quality factor (Q_m) together with a decrease in the remanent polarization (P_r) and piezoelectric constants (d₃₃). The variation of the structure and electrical properties with Bi deficiency amount was qualitatively interpreted in terms of the formation of Bi and oxygen vacancies in the Bi-deficient specimens. This research indicates the importance of adequately controlling Bi stoichiometry of (Na_0.5Bi_0.5)_0.93Ba_0.07TiO₃ ceramics in obtaining the desired ferroelectric and piezoelectric properties.     

Effects of double filling of Pb and Ba on thermoelectric properties of PbxBayCo4Sb11.5Te0.5 compounds by HPHT

Skutterudite compounds Pb_xBa_yCo₄Sb_11.5Te_0.5 (x≤0.23,y≤0.27) with bcc crystal structure have been prepared by the high pressure and high temperature (HPHT) method. The study explored a chemical method for filling Pb and Ba atoms into the voids of CoSb₃ to optimize the thermoelectric figure of merit ZT in the system of Pb_yBa_xCo₄Sb_11.5Te_0.5. The structure of Pb_xBa_yCo₄Sb_11.5Te_0.5 skutterudites was evaluated by means of X-ray diffraction. The Seebeck coefficient, electrical resistivity and power factor were performed from room temperature to 710 K. Compared with Co₄Sb_11.5Te_0.5, the thermal conductivity of Pb and Ba double-filled samples was reduced evidently. Among all filled samples, Pb_0.03Ba_0.27Co₄Sb_11.5Te_0.5 showed the highest power factor of 31.64 μW cm⁻¹ K⁻² at 663 K. Pb_0.05Ba_0.25Co₄Sb_11.5Te_0.5 showed the lowest thermal conductivity of 2.73 W m⁻¹ K⁻¹ at 663 K, and its maximum ZT value reached 0.63 at 673 K.     

Maxwell-Wagner characterization of dielectric relaxation in Ni0.8Zn0.2Fe2O4/Sr0.5Ba0.5Nb2O6 composite

Dense composites were prepared through incorporating the dispersed Ni_0.8Zn_0.2Fe₂O₄ ferromagnetic particles into Sr_0.5Ba_0.5Nb₂O₆ ferroelectric matrix. Extrinsic dielectric relaxation and associated high permittivities of the materials are reported in the composites. We used an ideal equivalent circuit to explain electrical responses in impedance formalism. A Debye-like relaxation in the permittivity formalism was also found. Interestingly, real permittivity (ε′) of the sample containing 30% Ni_0.8Zn_0.2Fe₂O₄ shows obvious independence of the temperature at 100 kHz. Dielectric relaxation and high-ε′ properties of the composites are explained in terms of the Maxwell-Wagner (MW) polarization model.     

Asymmetric electrical properties in Pt/Ba0.5Sr0.5Ti0.99Co0.01O3/Nb-doped SrTiO3 capacitors

Ba_0.5Sr_0.5Ti_0.99Co_0.01O₃ (BSTC) thin films have been fabricated with pulsed laser deposition on Nb-doped SrTiO₃ (STN) substrate. In Pt/BSTC/STN capacitor, we systematically investigated the capacitance, leakage current and polarization versus bias voltage characteristics, and found that curves of capacitance versus voltage and leakage current versus voltage were not symmetric, and polarization hysteresis loop exhibited large relaxation of the remnant polarization at negatively poled state. A detailed analysis of capacitance data demonstrated a difference of the built-in voltage between top Pt/BSTC interface (V_b,t=2.5 V) and bottom BSTC/STN interface (V_b,b=1.1 V). Such different built-in voltages lead to the presence of an internal electric field, which results in asymmetric electric characteristics in Pt/BSTC/STN capacitor.     

Infrared optical properties of PbZr0.4Ti0.6O3/La0.5Sr0.5CoO3 heterostructures on platinized silicon substrate

PbZr_0.4Ti_0.6O₃/La_0.5Sr_0.5CoO₃ heterostructures have been grown on Pt/Ti/SiO₂/Si substrates by chemical solution routes. Optical properties of the PbZr_0.4Ti_0.6O₃/La_0.5Sr_0.5CoO₃ heterostructures were studied by infrared spectroscopic ellipsometry (IRSE) in the spectral range of 2.5–12.5 m. The optical constants of PbZr_0.4Ti_0.6O₃ and La_0.5Sr_0.5CoO₃ thin films were determined by fitting the IRSE data using a classical dielectric model and a Drude dielectric model, respectively. For PbZr_0.4Ti_0.6O₃ thin films, the refractive index decreases and the extinction coefficient increases as the wavelength increases. For La_0.5Sr_0.5CoO₃ thin films, the refractive index and the extinction coefficient increase as the wavelength increases. The absorption coefficient of La_0.5Sr_0.5CoO₃ thin films is greater than 10⁴ cm^-1 for the wavelength range of 2.5–12.5 m. The absorption coefficient of PbZr_0.4Ti_0.6O₃ thin films on a La_0.5Sr_0.5CoO₃/Pt/Ti/SiO₂/Si substrate is smaller than that on a Pt/Ti/SiO₂/Si substrate by a factor of two. PACS 77.84.Dy; 78.20.Ci; 81.20.Fw     

Crystal electric field effects in Pr0.5Sr0.5CoO3

The energy structure and temperature evolution of the magnetic excitation spectra of Pr_0.5Sr_0.5CoO₃ are studied by inelastic neutron scattering. The measurements are performed on a polycrystalline sample of Pr_0.5Sr_0.5CoO₃ and its non-magnetic analogue La_0.5Sr_0.5CoO₃ on the high intensity time-of-flight spectrometer IN4 (ILL, Grenoble) in the temperature range 10 K < T < 300 K. The crystal electric field parameters in Pr_0.5Sr_0.5CoO₃ are calculated and the splitting scheme of the 4f ground multiplet of Pr³⁺ ions is determined based on the experimental data.     

Research on charge-ordering state in La0.5Sr0.5MnO2.88 and La0.5Sr0.5Mn0.5Ti0.5O3 systems

The structural, magnetic and transport properties of La_0.5Sr_0.5MnO_2.88 and La_0.5Sr_0.5Mn_0.5Ti_0.5O₃ samples have been investigated systematically. Indeed, this series has been considered to understand the influence of physical parameters such as oxygen deficiency and titanium doping effect in undoped La_0.5Sr_0.5MnO₃ sample. Ceramic material based on La_0.5Sr_0.5MnO_2.88 exhibits interesting behaviours of charge-ordering (CO), ferromagnetic (FM) states and a good conductivity down to the lowest temperatures. The substitution of Ti for Mn destroyed drastically the CO, damaged the motion of itinerant e_g electrons and changed the local parameters of perovskite cell. A change of the structure from tetragonal to rhombohedral symmetry is observed causing a weakening of double-exchange interaction. The experiment results show that the suppression of the CO is sensitive to the variety of Mn³⁺/Mn⁴⁺ ratio. In a field of 8 T at 10 K, FM and CO phase can be evaluated to be ∼20:80 according to the μ_exp/μ_cal ratio for La_0.5Sr_0.5MnO_2.88, whereas the CO state is suppressed for La_0.5Sr_0.5Mn_0.5Ti_0.5O₃ sample, FM and anti-ferromagnetic (AFM) phase are coexisted and evaluated to be ∼54:46, respectively.     

Phase transitions in ferroelectric ceramics of the type Sr0.5Ba0.5Nb2O6

The ferro-paraelectric transition in Sr_0.5Ba_0.5Nb₂O₆ ceramics has been studied by measuring the dielectric pennitivity as a function of temperature at different frequencies. Experimental results in the transition region over ?'_max fit the relation $\text{1}\text{?'}\text{?}\text{1}\text{?'}{}_{\max }\text{= A(T ?}\text{T}{}_0\text{)}{}^{\mathrm{\gamma }}$ with γ > 1, as is typical for dif transitions. In an interval of temperatures of 17°C over T₀ (=Tfor?'_max), γ = 2. Using the relaxors' model of Kirillov-Isupov an equation is inferred in order to compute the activation energy of the relaxors as a function of parameters directly obtained from the experimental results.     

Ferroelectric-relaxor behavior of (Na0.5K0.5)NbO3-based ceramics

We report that ferroelectric-relaxor behavior is induced by doping of SrO and TiO₂, or BaO and TiO₂ into classic ferroelectric (Na_0.5K_0.5)NbO₃. It is found that [(Na_0.5K_0.5)_0.9Sr_0.1](Nb_0.9Ti_0.1)O₃ ceramics exhibit a pronounced ferroelectric-relaxor behavior, comparable to that of [(Na_0.5K_0.5)_0.9Ba_0.1](Nb_0.9Ti_0.1)O₃ ceramics. Our results indicate that the relaxor behavior is closely related to the appearance of micropolar regions in these systems. The relaxor behavior should arise from the dynamic response of micropolar clusters. Raman spectra of [(Na_0.5K_0.5)_1−xSr_x](Nb_1−xTi_x)O₃ ceramics measured in the wavenumber range from 100 to 1200 cm⁻¹ confirm that the first order scattering is dominant in phonon bands should result from both short-range ordered region (micropolar regions) and disordered matrix. The frequency dependence of dielectric permittivity measurements show that the relaxor behavior of SrO and TiO₂, or BaO and TiO₂ doped (Na_0.5K_0.5)NbO₃ ceramics is not a Debye type in the radio frequency range.