On photoluminescence in HgGa2S4

In this paper, we investigate the kinetics of photoluminescence in excited crystals of HgGa₂S₄ which have recently been proposed for implementing tunable luminescent devices. From photoluminescence experiments, performed at various temperatures and excitation powers, it appears that two kinds of radiative recombination processes take place during crystal excitation. These originate two bands in emission spectra which were resolved by means of a fitting procedure. The dependencies of these bands on temperature and excitation power density are explained by means of a specific kinetic model. A broad band, peaking at about 1.8 eV, is ascribed to electron-hole tunnel recombinations occurring in associated donor-acceptor pairs, according to a Prener-Williams scheme. The second narrow band, peaking at about 2.3 eV, is ascribed to electron-hole recombinations occurring in centres presenting short () and long-life () excited states. At room temperature, owing to thermally activated relaxation from short- to long-life states, these centres saturate under relatively low excitation powers. The tunability of photoluminescence is a consequence of competition between monomolecular and bimolecular recombination processes.     

SnO2 / In2O3 one-dimensional nano-core-shell structures: Synthesis, characterization and photoluminescence properties

SnO₂/In₂O₃ one-dimensional nano-core-shell structures have been synthesized at 1350 ^°C by thermal evaporation of the mixture of metal Sn, Fe(NO₃)₃ powders and In particles. The as-synthesized products have been characterized by energy-dispersive X-ray spectroscopy, selected-area electron diffraction and high-resolution transmission electron microscopy. Microstructure characterization indicates the orientation relationship between core and shell is , . The formation mechanism of this nano-core-shell structure can be attributed to the cover of In₂O₃ on the surface of SnO₂ nanochains. The photoluminescence properties of the nano-core-shell structures have been measured. The PL spectrum shows some difference with the result from pure SnO₂ and In₂O₃ nanostructure that be deemed to relate to interface defects in SnO₂/In₂O₃ nano-core-shell structure.     

Effects of titania different phases on the microstructure and properties of K2Ti6O13 nanowires

Potassium titanate nanowires have been synthesized by a hydrothermal method using anatase and brookite nanocrystallites, respectively, as precursors. The corresponding products, alpha- and beta-K₂Ti₆O₁₃ nanowires, have distinct differences in structure and properties. Under the same conditions, the amount of K intercalated into anatase TiO₂ is larger than that into brookite TiO₂. The multiple types of reserved short Ti-O bonds in beta-K₂Ti₆O₁₃ confined the growth of nanowires along the [010] orientation and made the beta-K₂Ti₆O₁₃ nanowires stubby. The UV-vis absorption spectrum of beta-K₂Ti₆O₁₃ nanowires showed strong and wide absorption in the ultraviolet and visible region. Beta-K₂Ti₆O₁₃ is thermodynamically more stable than alpha-K₂Ti₆O₁₃.     

Third-order nonlinear optical properties of Bi2S3 and Sb2S3 nanorods studied by the Z-scan technique

Bismuth sulfide (Bi₂S₃) and antimony sulfide (Sb₂S₃) nanorods were synthesized by hydrothermal method. The products were characterized by UV-vis spectrophotometer, X-ray powder diffraction (XRD) and transmission electron microscope (TEM). Bi₂S₃ and Sb₂S₃ nanorods were measured by Z-scan technique to investigate the third-order nonlinear optical (NLO) properties. The result of NLO measurements shows that the Bi₂S₃ and Sb₂S₃ nanorods have the behaviors of the third-order NLO properties of both NLO absorption and NLO refraction with self-focusing effects. The third-order NLO coefficient χ⁽³⁾ of the Bi₂S₃ and Sb₂S₃ nanorods are 6.25×10⁻¹¹ esu and 4.55×10⁻¹¹ esu, respectively. The Sb₂S₃ and Bi₂S₃ nanorods with large third-order NLO coefficient are promising materials for applications in optical devices.     

Synthesis, structure and luminescence of LaSi3N5:Ce phosphor

In this work, new LaSi₃N₅:Ce³⁺ phosphors have been synthesized by solid-state reaction. Rietveld refinement of the crystal structure of La_1−xCe_xSi₃N₅ reveals that Ce atoms substituted for La atoms occupy 4a crystallographic positions. Broad emission and excitation bands observed were attributed to the transitions between the doublet ground state of the 4f¹ configuration and the crystal field components of the 5d¹ excited state. At 77 K, the centroid and crystal field splitting ε_cfs of the 5d levels of Ce³⁺ in LaSi₃N₅:Ce³⁺ compounds were valuated at 33.4×10³ and 11.3×10³ cm⁻¹, respectively. The zero-phonon line and the Stokes shift were measured to be 26.0×10³ and 5.0×10³ cm⁻¹, respectively.     

Synthesis and photoluminescence of CeO2:Eu phosphor powders

The crystalline structure and photoluminescence (PL) properties of europium-doped cerium dioxide synthesized by the solid-state reaction method were analyzed. CeO₂:Eu³⁺ phosphor powders exhibit the pure cubic fluorite phase up to 10 mol% doping concentration of Eu³⁺. With indirect excitation of CeO₂ host at 373 nm, the PL intensity quickly increases with increasing Eu³⁺ concentration, up to about 1 mol%, and then decreases indicating the concentration quenching. While with direct excitation (467 nm), much more stronger PL emissions, especially the electric dipole emission ⁵D₀-⁷F₂ at 612 nm, are observed and no concentration quenching occurs up to 10 mol% doping concentration of Eu³⁺. The nature of this behavior and the cause of the concentration quenching were discussed.     

Synthesis and photoluminescence of aligned SiO<Subscript>x</Subscript> nanowire arrays

Aligned SiO_x nanowire arrays standing on a Si substrate were successfully synthesized using a simple method by heating a single-crystalline Si slice covered with SiO₂ nanoparticles at 1000 °C in a flowing Ar atmosphere. The SiO_x nanowire arrays were characterized by scanning electron microscopy and transmission electron microscopy. The SiO_x nanowires become progressively thinner from bottom to top. The formation process of the SiO_x nanowire arrays is closely related to a vapor–solid mechanism. Room-temperature photoluminescence measurements under excitation at 260 nm showed that the SiO_x nanowire arrays had a strong blue–green emission at 500 nm (about 2.5 eV), which may be related to oxygen defects. Received: 29 April 2002 / Accepted: 30 April 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +86-551-559-1434, E-mail: gwmeng@mail.issp.ac.cn     

Polymer-assisted hydrothermal synthesis of Bi2S3 nanostructured flowers

Nanostructured Bi₂S₃ was hydrothermally produced from Bi₂O₃ and thiocarbohydrazide in acidic solutions containing PVA, PEG and PVP. By using XRD, SAED and Raman spectrometry, the products were orthorhombic Bi₂S₃, with four vibration modes at 139.6, 253.7, 310 and 968.9 cm⁻¹. The phase was also in accordance with the diffraction patterns obtained by simulation. SEM, TEM and HRTEM show that the products are clusters of nanorods produced in polymer-free solution, and nanostructured flowers of nanospears, nanorods and nanoplates in the respective PVA-, PEG- and PVP-added solutions, with their growths in the same direction of [0 0 1]. A formation mechanism was also proposed according to their phase and morphologies.     

Waveguiding and photoluminescence in Er-doped Ta2O5 planar waveguides

The optimization of erbium-doped Ta₂O₅ thin film waveguides deposited by magnetron sputtering onto thermally oxidized silicon wafer is described. Optical constants of the film were determined by ellipsometry. For the slab waveguides, background losses below 0.4 dB/cm at 633 nm have been obtained before post-annealing. The samples, when pumped at 980 nm yielded a broad photoluminescence spectrum (FWHM∼50 nm) centred at 1534 nm, corresponding to ⁴I_13/2-⁴I_15/2 transition of Er³⁺ ion. The samples were annealed up to 600 °C and both photoluminescence power and fluorescence lifetime increase with post-annealing temperature and a fluorescence lifetime of 2.4 ms was achieved, yielding promising results for compact waveguide amplifiers.     

Catalytic synthesis and photoluminescence of needle-shaped 3C-SiC nanowires

Needle-shaped 3C-SiC nanowires were grown from commercially available SiC powders in a thermal evaporation process with iron as catalyst. A strong broad photoluminescence peak located around 450 nm was observed at room temperature, which may be ascribed to quantum size effects of nanomaterials. Needle-shaped 3C-SiC nanowires may have great potential applications such as blue-green light-emitting diodes and display devices.     

Synthesis of β-Ga2O3 nanowires through microwave plasma chemical vapor deposition

In this study, we demonstrate the large-scale synthesis of beta gallium oxide (β-Ga₂O₃) nanowires through microwave plasma chemical vapor deposition (MPCVD) of a Ga droplet in the H₂O and Ar atmosphere at 600 W. Unlike the commonly used MPCVD method, the H₂O, not mixture of gas, was employed to synthesize the nanowires. The ultra-long β-Ga₂O₃ nanowires with diameters of about 20-30 nm were several tens of micrometers long. The morphology and structure of products were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and high-resolution transmission electron microscope (HRTEM). The growth of β-Ga₂O₃ nanowires was controlled by vapor-solid (VS) crystal growth mechanism.     

Effect of rare earth (Pr2O3, Nd2O3, Sm2O3, Eu2O3, Gd2O3 and Er2O3 ) on the acoustic properties of glass belonging to bismuth-borate system

Bismuth-borate glasses doped with some rare earth ions were studied with respect to the density, molar volume and the elastic moduli, Poisson’s ratio, Debye temperature, microhardness, softening temperature, acoustic impedance, diffusion constant and latent heat of melting. Ultrasonic velocities were measured by the pulse echo overlap technique at a frequency of 10 MHz and at room temperature. From these velocities and density values, various elastic moduli were calculated. The correlation of elastic stiffness, the cross link density, and the fractal bond connectivity of these glasses are discussed. The derived experimental values of shear modulus, bulk modulus, Young’s modulus, and Poisson’s ratio for our glasses are compared with the theoretically calculated values in terms of the bond compression model and Makishima-Mackenize theory.     

Electronic structure of HgGa2S4

The electronic structure and chemical bonding in HgGa₂S₄ crystals grown by vapor transport method are investigated with X-ray photoemission spectroscopy. The valence band of HgGa₂S₄ is found to be formed by splitted S 3p and Hg 6s states at binding energies BE=3-7 eV and the components at BE=7-11 eV generated by the hybridization of S 3s and Ga 4s states with a strong contribution from the Hg 5d states. At higher binding energies the emission lines related to the Hg 4f, Ga 3p, S 2p, S 2s, Hg 4d, Ga LMM, Ga 3p and S LMM states are analyzed in the photoemission spectrum. The measured core level binding energies are compared with those of HgS, GaS, AgGaS₂ and SrGa₂S₄ compounds. The valence band spectrum proves to be independent on the technological conditions of crystal growth. In contrast to the valence band spectrum, the distribution of electron states in the bandgap of HgGa₂S₄ crystals is found to be strongly dependent upon the technological conditions of crystal growth as demonstrated by the photoluminescence analysis.     

Synthesis and red-shifted photoluminescence of single-crystalline ZnO nanowires

Local-oriented single-crystalline ZnO nanowires have been synthesized in large scale by a simple microemulsion method in the presence of sulfonate-polystyrene (S-PS) and dodecyl benzene sulfonic acid sodium salt (DBS). The as-prepared product is characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), infrared (IR) spectra and photoluminescence (PL) spectrum. The nanowires exhibit a local congregation and preferentially grow along the [0 0 2] facet. FT-IR spectrum indicates that S-PS is adsorbed on the surface of ZnO nanowires. The PL spectrum shows evidently red-shifted ultraviolet (UV) emission.     

Investigation of spectroscopic properties and thermal stability of Er/Yb-co-doped Bi2O3-B2O3-Ga2O3 glasses

A series of Er³⁺/Yb³⁺-co-doped 60Bi₂O₃-(40−x) B₂O₃ -xGa₂O₃ (BBGA x=0, 4, 8, 12, 16 mol%) glasses have been prepared. The absorption spectra, emission spectra, fluorescence lifetime of Er³⁺:⁴I_13/2 level and thermal stability were measured and investigated. Three Judd-Ofelt intensity parameters Ω_t (t=2,4,6) (Ω₂=(4.67-5.93)×10⁻²⁰ cm², Ω₄=(1.50-1.81)×10⁻²⁰ cm², Ω₆=(0.92-1.17)×10⁻²⁰ cm²) of Er³⁺ ions were calculated by Judd-Ofelt theory. It is found that the Ω₆ first increases with the increase of Ga₂O₃ content from 0 to 8 mol% and then decreases, which is mainly affected by the number of non-bridging oxygen ions of the glass network. The high peak of stimulated emission cross-section () of Er³⁺: ⁴I_13/2→⁴I_15/2 transition were obtained according to McCumber theory and broad full width at half maximum (FWHM=69-76 nm) of the ⁴I_13/2→⁴I_15/2 transition of Er³⁺ ions were measured. The results indicate that these new BBGA glasses can be used as a candidate host material for potential broadband optical amplifiers.     

Temperature-dependent photoluminescence in La2/3Ca1/3MnO3

Visible photoluminescence and its temperature dependence of La_2/3Ca_1/3MnO₃ in the temperature range 138-293 K were measured. It was observed that the main broad band centered at ∼1.77 eV with the shoulders at ∼1.57 and ∼1.90 eV existed in the entire temperature range. It can be well fitted by three Gaussian curves B₁, B₂ and B₃ centered at ∼1.52, ∼1.75 and ∼1.92 eV, respectively. The intensities of the peak B₁ and B₂ vary as temperature increases. In the entire temperature range, the intensity of B₁ increases with increasing temperature, whereas that of B₂ decreases. The photoluminescence mechanisms for La_2/3Ca_1/3MnO₃ are presented based on the electronic structures formed by the interactions among spin, charge and lattice, in which B₁ was identified with the charge transfer excitation of an electron from the lower Jahn-Teller split e_g level of a Mn³⁺ ion to the e_g level of an adjacent Mn⁴⁺ ion, B₂ is assigned to the transition between the spin up and spin down e_g bands separated by Hund's coupling energy E_J and B₃ is attributed to the transition, determined by the crystal field energy E_C, between a t_2g core electron of Mn³⁺ to the spin up e_g bands of Mn⁴⁺ by a dipole allowed charge transfer process.     

Electrical transport and high thermoelectric properties of PbTe doped with Bi2Te3 prepared by HPHT

In this paper, n-type lead telluride (PbTe) compounds doped with Bi₂Te₃ have been successfully prepared by high pressure and high temperature (HPHT) technique. The composition-dependent thermoelectric properties of PbTe doped with Bi₂Te₃ have been studied at room temperature. The figure-of-merit, Z, for PbTe is very sentivite to the dopants, which could be improved largely although the doped content of Bi₂Te₃ is very small (<0.08 mol%). In addition, the maximum value reaches to 9.3×10⁻⁴ K⁻¹, which is about 20% higher than that of PbTe alloyed with Bi₂Te₃ sintered at ambient pressure (7.6×10⁻⁴ K⁻¹) and several times higher than that of small grain size PbTe containing other dopants. The improved thermoelectric performance in this study may be due to the effect of high pressure and the low lattice thermal conductivity resulting from Bi₂Te₃ as source of dopants.     

Synthesis of crystalline SrMoO4 nanowires from polyoxometalates

Crystalline SrMoO₄ nanowires were synthesized via a facile hydrothermal process at 180 °C for 10 h. α-(NH₄)₆-P₂Mo₁₈O₆₂·nH₂O, one of polyoxometalates with Dawson structure, was employed as the source of molybdates. The diameter and length of the obtained SrMoO₄ nanowires are about 20 nm and 5-10 μm, respectively. HRTEM results show that the SrMoO₄ nanowires are of high crystallinity with rough surface. However, when Na₂MoO₄·2H₂O was used, there are only SrMoO₄ nanorods with smaller aspect ratio (200/70 nm) in the similar hydrothermal process. The probable growth mechanism was discussed.     

Structure, microstructure and photoluminescence properties of Fe doped SnO2 thin films

In this paper, effects of Fe doping on crystallinity, microstructure and photoluminescence (PL) properties of sol-gel derived SnO₂ thin films are reported. It is shown that doping of Fe³⁺ ions leads to crystallite size reduction and higher strain in SnO₂ thin films. The room temperature PL spectra show marked changes in intensity and blue-shift of the emission lines upon Fe doping. These observations have been correlated with structural changes and defect chemistry of Fe doped SnO₂ thin films.