Influences of Triton X-100 on Hemoglobin Behaviors in Hemoglobin/Acyclovir/Triton X-100/H2O System

The influences of Triton X-100 on hemoglobin （Hb） behaviors were studied by the methods of UV-Vis spectrum, fluorescence spectrum, HPLC, conductivity, zeta potential and negative-staining transmission electron microscope in Hb/acyclovir/Triton X-100/H2O system. With the increase of Triton X-100 concentration in the system, the percentage of the free acyclovir increased from 58%--63% to 90%--94%. The static quenching constant and the association number of acyclovir to Hb decreased. The fluorescence spectrum, conductivity, zeta potential, fluorescence polarization and negative-staining morphology of Hb tended to recover to those of the original state of Hb in the same concentration of Hb. The interaction between Triton X-100 and Hb is stronger than that between acyclovir and Hb. Most Triton-X-100 was associated with Hb at low Triton X-100 concentration. But the interaction of Triton X-100 with Hb was apparently dominant in high Triton X-100 concentration. The Hb structure was unfolded and finally denatured.     

不同酸对介孔二氧化硅球表面形貌和介相结构的影响

在室温、不同酸性条件下合成出微米级球形介孔二氧化硅材料，通过XRD、SEM以及氮气吸附等手段对介孔二氧化硅材料进行了表征。用TEM跟踪不同反应时间介孔二氧化硅球的形成，对这些球颗粒的合成机理进行了讨论，同时探讨了不同酸性条件下介孔二氧化硅表面形貌和介相结构的变化。     

甲酰胺对有序介孔二氧化硅形貌的影响

At room temperature and in acidic solution, ordered mesoporous silicas with particular morphology were synthesized using cetylpyridinium chloride as the template and formamide as the cosolvent. Scanning electron microscope (SEM), small angle X-ray diffraction (SXRD), and nitrogen adsorption techniques were used to characterize the as-synthesized and calcined samples. Results showed that the samples had hexagonal mesostructure analogous to MCM-41 and relatively narrow pore-size distributions (BJH). Besides, BET surface areas of the samples were in the range of 1 000～1 250 m²·g^-1 and high total pore volumes were up to 1.367 cm³·g^-1. Addition of formamide affected obviously mesostructures and the morphology of the mesoporous silica. Furthermore, with the increase of the concentration of formamide, the unit-cell constant decreased and particle shape changed from gyroids to fibers.     

二元阴、 阳离子表面活性剂调控合成不同形貌的介孔二氧化硅

经过简单的水热处理, 以二元阴、 阳离子表面活性剂[十六烷基三甲基溴化铵(CTAB)和十二烷基磺酸钠(SDS)分别作为阳离子表面活性剂和阴离子表面活性剂]为模板剂合成了不同形貌的介孔二氧化硅. 通过调控2种表面活性剂摩尔分数R(R=n(SDS)/[n(SDS)+n(CTAB)]), 合成了多种形貌的介孔二氧化硅. 对合成的不同形貌样品通过扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 X射线粉末衍射仪(XRD) 及比表面和孔隙分析仪进行了表征. 结果表明, 随着R值从0.01变化到0.50, 介孔二氧化硅的形貌经历了一系列规律性的变化, 出现了二维六方、 层状相和反相堆积的形貌: 在R=0.01~0.18之间, 主要产物为六方相棒状结构, 且长径比随着R值增大而增大; 在R=0.20~0.28之间主要得到空心泡状结构且具有明显的演变过程; 在R=0.32~0.40之间发生了多层囊泡到单层囊泡的结构转变; 当R值超过一定范围时会产生反相堆积的形貌. 分析认为, SDS在加入过程中通过影响堆积参数g影响胶束的形貌变化, 调控了不同形貌介孔二氧化硅的合成. 各阶段产物形貌和R值的变化有直接关系, 可通过改变R值来合成特定形貌的产物.     

温度对介孔二氧化硅形貌和介相结构有序性的影响

1992年Kresge等科学工作者首次报道了一种新颖的介孔二氧化硅材料,介孔二氧化硅的合成及其性能表征引起了广泛的研究兴趣[1,2]。这种材料由于具有高比表面积(1000~1400m2·g-1)、孔道排列有序、孔径分布窄并可以在2~10nm范围内可调等优点,所以有望用于催化与吸附、化学传感、纳     

Triton X-100在乙二醇中的胶体性质

表面活性剂在非水溶剂中聚集态的研究所见的报导与水体系相比要少得多．然而近年来对非水体系的研究日益增多．这是因为表面活性剂在非水溶剂中的应用日趋增加，但与水体系相反，对非水体系的性质了解甚少．对表面活性剂非水体系的研究还有助于对其聚集体的共溶剂效应有更深的认识．TritonX－100（以下简写为TX－100）是典型的非离子表面活性剂，在工业上有着广泛的应用．乙二醇在多醇中与水的化学结构最相近问，然而它却是水结构的破坏剂，加入少量的乙二醇会使水的冰点急剧下降．乙二醇又是蛋白质的变性溶剂．表面活性剂在乙二醇中的胶…     

窄孔分布介孔分子筛MSU-1的合成

以水玻璃为硅源，在pH=3以下合成MSU-X介孔材料的报道很少，本文将pH范围扩展至0.78，并从廉价的水玻璃和工业级非离子表面活性剂AEO-9出发，用二步法合成出介孔分子筛MSU-1。首先将无机前驱体和非离子表面活性剂在介稳态下(pH≈2，t≈2 ℃)混合，然后调pH至所需值(0.78～3.94)，在该pH值下进行二氧化硅缩聚。合成出的MSU-1具有孔分布窄，短程有序度提高，颗粒呈微米级等特点。其中在pH=1.98下合成的MSU-1具有最薄的孔壁、最大的比表面和孔容；在pH=0.78下合成的MSU-1具有最厚的孔壁、最大的孔径和d100值。随着pH值的增大，孔壁厚度先减小后增大。     

棒状有序纳米介孔二氧化硅的合成

以十六烷基氯化吡啶为模板剂,甲酰胺为共溶剂,在室温酸性条件下合成了棒状有序纳米介孔二氧化硅,并用扫描电镜(SEM)、小角X射线衍射(SXRD)和N2气体吸附仪对其进行了表征。结果表明,棒状产物形貌规整,形态均一,长度约30～50μm,直径约5μm,具有MCM41的有序六方孔道结构;煅烧后的样品显示典型的Ⅳ型吸附等温线和H1型滞后环,孔径分布很窄,BJH最可几孔径为2.15nm,BET表面积高达1335m2·g-1。     

介孔分子筛MSU-1的合成

MSU X介孔分子筛具有三维立体交叉排列的蠕虫状孔道结构,有利于客体分子在其孔道内扩散[1]。目前合成MSU X的原料[2 4]TEOS水解速度慢,合成过程较易控制,但价高、易燃、有刺激性。本文采用文献[5 7]法,以水玻璃、A(EO)9为原料,在酸性至近中性的范围里合成了MSU 1介孔分子筛,与TEOS为原料的MSU 1合成进行了比较,考察了pH值和不同类型表面活性剂(脂肪醇聚氧乙烯醚和烷基酚聚氧乙烯醚)对产物结构性质的影响。1　实验部分1 1　试剂和仪器水玻璃(SiO2%≈26、Na2O%≈8),工业级,青岛海洋化工厂生产;脂肪醇聚氧乙烯醚非离子表面活性…     

阴离子表面活性剂为模板合成双重介孔结构二氧化硅

本文报道以阴离子表面活性剂十二烷基肌氨酸钠为模板,合成具有层状结构和蠕虫状介观结构的双重介孔二氧化硅颗粒．这些颗粒的尺度在300～50011111,氮气吸附表明其比表面为536m^2/g,孔体积为0．83cm^3／g,具有3nm和12nm的双重介孔分布．层状结构形成可归因于表面活性剂形成的层状液晶相模板,而无序蠕虫相是由表面活性剂柱状液晶相模板诱导形成的．层状液晶相的产生可归因于部分质子化的羧酸表面活性剂诱导的柱状相到层状相的转化．     

Triton X—100—DPSA法测定血铅

着重研究了在微分电位溶出法测定血铅中加入ＴｒｉｔｉｏｎＸ－１００非离子型表面活性剂的效果，发现它能改善溶出峰形，减少误差，明显地提高分析的灵敏度，铅溶出峰与浓度在０．００２～０．０１ｍｇ／Ｌ范围呈线性关系，回归方程式和相关系数为ｙ＝１４．５７＋７５７．１４ｘ，ｒ＝１，其相关系数比原法稍有提高，变异系数７．１％，回收率９６．８％～１０３．９％，本法取血量少，血样经微汉消解即可测定，简便快速准确，便基     

Synthesis of new 4,6-diaryl-2-(arylthio)nicotinonitriles in Triton X-100 aqueous micellar media

In this communication,we report four component condensations of acetophenone,arylaldehydes,arylthiol,and malononitrile in the presence of Triton X-100（5 mol%） aqueous micelles.This reaction led to the formation of 4,6-diaryl-2-（arylthio）nicotinonitrile new derivatives in good yields.The FT-IR,¹⁹F NMR,¹H NMR,¹³C NMR spectra and elemental analysis confirm the structure of compounds.     

Synthesis of silica particles with lamellar and wormhole-like bi-modal mesopores using anionic surfactant as the template

Silica particles with lamellar and wormhole-like bi-modal mesopores have been synthesized using anionic surfactant (N-lauroylsarcosine sodium) as the template. The particles with diameters of 300―500 nm possess bi-modal mesopores with pore sizes of 3 nm and 12 nm, which were ascribed to the disordered wormhole-like mesophase and lamellar mesophase, respectively. The BET surface area of the particles was 536 m2/g and the pore volume was 0.83 cm3/g. The lamellar mesophase and cylindrical mesophase were formed...     

TritonX-100-5-Br-PADAP光度法测定发样中铁

在表面活性剂Triton X-100存在下,以5－Br-PADAP作显色剂,光度法测定发样中铁,结果在所选浓度范围内线性关系良好,稳定时间长,回收率平均为98．14％。     

Thermodynamics of non-ionic surfactant Triton X-100-cationic surfactants mixtures at the cloud point

This study investigates the effects of gemini and conventional cationic surfactants on the cloud point (CP) of the non-ionic surfactant Triton X-100 (TX-100) in aqueous solutions. Instead of visual observation, a spectrophotometer was used for measurement of the cloud point temperatures. The thermodynamic parameters of these mixtures were calculated at different cationic surfactant concentrations. The gemini surfactants of the alkanediyl-α-ω-bis (alkyldimethylammonium) dibromide type, on the one hand, with different alkyl groups containing m carbon atoms and an ethanediyl spacer, referred to as “m-2-m” (m = 10, 12, and 16) and, on the other hand, with –C₁₆ alkyl groups and different spacers containing s carbon atoms, referred to as “16-s-16” (s = 6 and 10) were synthesized, purified and characterized. Additions of the cationic surfactants to the TX-100 solution increased the cloud point temperature of the TX-100 solution. It was accepted that the solubility of non-ionic surfactant containing polyoxyethylene (POE) hydrophilic chain was a maximum at the cloud point so that the thermodynamic parameters were calculated at this temperature. The results showed that the standard Gibbs free energy , the enthalpy and the entropy of the clouding phenomenon were found positive in all cases. The standard free energy increased with increasing hydrophobic alkyl chain for both gemini and conventional cationic surfactants; however, it decreased with increasing surfactant concentration.     

The effects of various foreign substances on the cloud point of Triton X 100 and Triton X 114

The nonionic surfactants Triton X 100 and Triton X 114 form isotropic micellar solutions around 25°C. One of the characteristic features of these solutions is the fact that at higher temperatures they undergo clouding and liquid-liquid phase separation. Addition of various additives to the surfactant solutions does change the temperature at which the clouding phenomenon occurs. In this paper such effect of additives on the clouding phenomenon of Triton X 100 and Triton X 114 are discussed.     

Role of Cloud Point of the Capping Agent (Nonionic Surfactant,Triton X-100) on the Synthesis of Silver Nanoparticles

The solution behavior of the nonionic surfactants below and above the cloud point (CP) is quite different. Below CP, a single phase of molecular or micellar solution exists, whereas above the CP, the solution separates into two phases: the first one is denser and smaller phase and contains most of the surfactant and the other one is relatively a voluminous aqueous phase and has surfactant concentration close to the critical micelle concentration (cmc). There are many reports available where nonionic surfactant is used as capping agent. But, to the best of our knowledge, there is no report on the CP's role on the synthesis of nanoparticles (NPs). Therefore, it is very important to understand the role of the CP on the synthesis of NPs. In the present work, we report the role of the clouding of the nonionic surfactant Triton X-100 (using as capping agent) on the synthesis of AgNPs below and above the CP. The morphology of AgNPs was studied by transmission electron microscopy (TEM), dynamic light scattering (DLS), UV–Vis absorption, etc., techniques. Below the CP, spherical polydisperse particles of 12 ± 5 nm mean diameter were found, whereas above the CP, the aggregated particles with higher diameter were found.     

Triton X-100增敏光度法测定铝土矿中的微量钪

研究了在HCl溶液中微量钪(Ⅲ)-偶氮氯膦Ⅲ(CPAⅢ)之间的配合反应。结果表明,在0.5mol/LHCl溶液中和TritonX 100的存在下,有色溶液的最大吸收波长为680nm,表观摩尔吸光系数为2.62×104L·mol-1·cm-1。钪(Ⅲ)质量浓度在0～0.45mg/L范围内符合比耳定律,钪(Ⅲ)的加标回收率在98.0%～105.1%之间,RSD(n=6)为2.1%～2.6%。可用于铝土矿中的微量钪的测定。