Synthesis and crystal structure of Cu(I) and Ni(II) complexes of 1,1-diethyl-3-(4-fluorobenzoyl)-thiourea

The reaction of 1,1-diethyl-3-(4-fluorobenzoyl)-thiourea (HL) with CuCl₂ ·?2H₂O and NiCl₂ ·?6H₂O give two complexes, Cu(HL)₃Cl (1) and NiL₂ (2). The crystal structures of these products were determined by single crystal X-ray diffraction. In 1, three HL molecules are unidentate, coordinating through the sulfur, and the copper is tetrahedral with three S and one Cl. In 2, two HL molecules are O and S donor bidentate and coordinate as anionic species with loss of the proton from the acyl-substituted nitrogen; the nickel is square-planar.     

Four-coordinate N-heterocyclic carbene (NHC) copper(I) complexes with brightly luminescence properties

Three four-coordinate N-heterocyclic carbene (NHC) copper(I) complexes, [Cu(Py-Im)(POP)](PF₆) (P1), [Cu(Py-BenIm)(POP)](PF₆) (P2), and [Cu(Py-c-BenIm)(POP)](PF₆) (P3) (Py-Im = 3-methyl-1-(pyridin-2-yl)-1H-imidazolylidene, Py-BenIm = 3-methyl-1-(pyridin-2-yl)-1H-benzo[d]imidazolylidene, Py-c-BenIm = 3-methyl-1-(pyridin-2-ylmethyl)-1H-benzo[d]imidazolylidene, POP = bis([2-diphenylphosphino]-phenyl)ether), have been synthesized without transmetalation of the NHC–Ag(I) complex for the first time. The photophysical properties of the resultant NHC–Cu(I) complexes have been systematically investigated via spectroscopic methods. All complexes exhibit good photoluminescence properties with long excited-state lifetimes and moderate quantum yields. Density functional theory and time dependent density functional theory calculations were employed to rationalize the photophysical properties of the NHC–Cu(I) complexes.     

Synthesis of Cu(I) octamolybdates using tetrakis-acetonitrilecopper(I) hexafluorophosphate

Reaction of (NBu₄)₂[Mo₂O₇] with [Cu(CH₃CN)₄](PF₆) in acetonitrile results in isolation of the orange β-octamolybdate [Cu(CH₃CN)₄]₂[Mo₈O₂₆Cu₂(CH₃CN)₄] (1) along with the colourless α-octamolybdate [Cu(CH₃CN)₄]₄[Mo₈O₂₆]·2CH₃CN (2). Both products decompose rapidly upon removal from their mother liquors, forming an insoluble, dark brown coloured phase with the composition Cu₄[Mo₈O₂₆]·0.6CH₃CN·16H₂O (3). The copper(I) acetonitrile derivatised isopolyanion in 1 thus represents an intermediate structure between the simple, underivatised octamolybdate 2 and fully condensed, polymeric phase 3.     

Synthesis,crystal structure and magnetic properties of a new complex containing Cu(I) and radicals, [Cu(imme2py)2](ClO4)

A new complex, [Cu(imme2py)₂](ClO₄) (imme2py?=?2-(2′-(6′-methylpyridyl))-4,4,5,5-tetramethyl-1H-imidazolyl-1-oxyl) has been synthesized and structurally characterized by X-ray diffraction methods. It crystallizes in the orthorhombic crystal system, space group P ₂₁₂₁₂₁ . The structure consists of [Cu(imme2py)₂]⁺ cations and chloride anions. The coordination geometry about Cu(I) is tetrahedral with the four coordination sites being occupied by four nitrogen atoms. Magnetic measurements show intramolecular antiferromagnetic interactions between the imino nitroxides.     

Synthesis and characterization of Cu(I) and Cu(II) complexes containing ketiminate ligands

A series of Cu(I) and Cu(II) complexes containing substituted ketiminate ligands was synthesized. Reaction of CuCl₂ with 2 equiv. of Li[OC(Me)CHC(Me)N(Ar)] in toluene generated dark green solid of Cu[OC(Me)CHC(Me)N(Ar)]₂ (1). Similarly, Cu(I) complex, {Cu[OC(Me)CHC(Me)N(Ar)]Li[OC(Me)CHC(Me)N(Ar)]}₂ (2) was synthesized by reacting 2 equiv. of Li[OC(Me)CHC(Me)N(Ar)] with CuCl in toluene at room temperature for 12 h. While the reaction of CuCl with Li[OC(Me)CHC(Me)N(Ar)] in the presence of triphenylphosphine in THF solution at room temperature, a three-coordinated Cu[OC(Me)CHC(Me)N(Ar)](PPh₃) (3) can be isolated in high yield. Replacing the PPh₃ of 3 with N-heterocarbene (NHC) generates Cu[OC(Me)CHC(Me)N(Ar)](NHC) (4) in low yield. Complexes 2, 3, and 4 were characterized by ¹H and ¹³C NMR spectroscopies and all molecules were structurally characterized by X-ray diffractometry. Two coordination modes of ketiminate ligands were found in the molecular structure of 2, one of which is copper-coordinated terminal ketiminates and the other is lithium-copper-coordinated bridging ketiminates.     

Synthesis,characterization, and luminescent properties of three-coordinate copper(I) halide complexes containing a carbazolyl monodentate phosphine ligand

Abstract

A series of three-coordinate dinuclear copper halide complexes containing acarbazolyl monodentate phosphine ligand, [CuX(dppc)]₂ (dppc =3,6-di-tert-butyl-9-[2-(diphenylphosphino)phenyl]carbazole, X?=?I (1), Br (2), and Cl (3)), were synthesized, and their molecular structures and photophysical properties were investigated. The structural analysis reveals that two copper(I) centers are bridged by two halogen ligands to form a dinuclear structure with a four-membered Cu₂X₂ ring. Crystal structures of 1-3 contain 1-D supramolecular arrays constructed by intermolecular C–H···π interactions. These complexes exhibit blue to green emission in the solid state at room temperature and have peak emission wavelengths at 492–495?nm with microsecond lifetimes and low emission quantum yields (< 0.01%). The emission of 1-3 mainly originates from MLCT, XLCT, and IL (intraligand) transitions. The three complexes displayed good thermal stability.     

Copper(II) complexes of tetradentate N2S2 donor sets: Synthesis,crystal structure characterization and reactivity

Two mononuclear and one dinuclear copper(II) complexes, containing neutral tetradentate NSSN type ligands, of formulation [Cu^II(L¹)Cl]ClO₄ (1), [Cu^II(L²)Cl]ClO₄ (2) and [Cu^II₂(L³)₂Cl₂](ClO₄)₂ (3) were synthesized and isolated in pure form [where L¹ = 1,2-bis(2-pyridylmethylthio)ethane, L² = 1,3-bis(2-pyridylmethylthio)propane and L³ = 1,4-bis(2-pyridylmethylthio)butane]. All these green colored copper(II) complexes were characterized by physicochemical and spectroscopic methods. The dinuclear copper(II) complex 3 changed to a colorless dinuclear copper(I) species of formula [Cu^I₂(L³)₂](ClO₄)₂,0.5H₂O (4) in dimethylformamide even in the presence of air at ambient temperature, while complexes 1 and 2 showed no change under similar conditions. The solid-state structures of complexes 1, 2 and 4 were established by X-ray crystallography. The geometry about the copper in complexes 1 and 2 is trigonal bipyramidal whereas the coordination environment about the copper(I) in dinuclear complex 4 is distorted tetrahedral.     

Synthesis,spectroscopic and electrochemical characterization of copper(I) complexes with functionalized pyrazino[2,3-f]-1,10-phenanthroline

The present work reports the synthesis and spectroscopic and electrochemical characterization of homoleptic copper(I) complexes with substituted pirazino [2,3-f]-1,10-phenanthroline, RpplR′, (R = H, Me, COOH or COOMe, and R′ = H, Me) as ligand. The ligand ppl works as an acceptor of electronic density, which is delocalized mainly in the quinoxaline part of its structure. The UV–Vis spectra show that all the complexes display bands in the range 400–650 nm, which are MLCT in character. The λ_max and extinction coefficients of the MLCT band at 450 nm and the LC band do not change significatively when varying the R substituent. Nevertheless, the intensity of the shoulder around 500 nm does change; this absorption has been related to either a static or dynamic flattening distortion of the complex D_2d → D₂ symmetry. The cyclic voltammetry of the complexes shows irreversible redox processes with E_p values that do not follow the tendency expected from the donor/acceptor character of the substituents on the ligand. All the complexes studied showed no emission both in acetonitrile and dichloromethane as solvent at room temperature and under argon atmosphere.     

Solid State Synthesis and Structural Characterizationof Binuclear Cu( I)-Sb Ph_3 Co m plex 〔 Cu( Sb Ph_3)_2 I〕

１　ＩＮＴＲＯＤＵＣＴＩＯＮＣｕ（Ｉ）ｃｏｍｐｌｅｘｅｓｗｉｔｈｐｈｏｓｐｈｉｎｅａｎｄａｒｓｉｎｅｌｉｇａｎｄｓａｒｅｗｅｌｌｋｎｏｗｎ〔１〕．ＦｏｒＣｕｐｈｏｓｐｈｉｎｅｃｏｍｐｌｅｘｅｓ，ｔｈｅＣｕ∶ｌｉｇａｎｄｒａｔｉｏｖａｒｉｅｓｆｒｏｍ１∶１ｔｏ１∶４ａｎｄｃｏｏｒｄｉｎａｔｉｏｎｇｅｏｍｅｔｒｙｏｆＣｕ（Ｉ）ｒａｎｇｅｓｆｒｏｍｌｉｎｅａｒｔｏｔｒｉｇｏｎａｌ，ｔｈｅｎｔｏｔｅｔｒａｈｅｄｒａｌｅｘｔｒｅｍｅｓ；ｆｏｒｅｘａｍｐｌｅ，ｔｈｅ１∶２ａｄｄｕｃｔｓＣｕ（ＰＰｈ３）…     

一价铜配合物〔Cu（C_8H_4F_3O_2S）（PPh_3）_2〕的合成和晶体

室温下，铜粉和２－噻吩甲酰三氟丙酮、三苯基膦在甲醇和四氢呋喃混合溶剂中反应，生成一价铜的配合物［Ｃｕ（Ｃ_８Ｈ_４Ｆ_３Ｏ_２Ｓ）（ＰＰｈ_３）_２］，测定了该配合物的晶体结构，结果表明，晶体属单斜晶系，Ｐ２_１／ｎ空间群，晶胞参数：ａ＝１０．５８４（１），ｂ＝１６．７３８（１），ｃ＝２２．７２８（９）Ａ；β＝９４．２２（２）°，Ｖ＝４０１５．２Ａ３，Ｍｒ＝７８５．２９，Ｚ＝４，Ｄｃ＝１０２９９ｇ／ｃｍ３，μ＝９．８６ｃｍ－１。晶体结构由直接法解出，使用块对角矩阵和全矩阵最小二乘法对原子参数进行修正，最后偏离因子Ｒ＝０．０４８，Ｒｗ＝０．０５４，其中４３９１个Ｉ＞３σ（Ｉ）的可观察衍射点参加了结构修正，结果表明，Ｃｕ原子由２个Ｏ原子和２个Ｐ原子配位，形成畸变四面体构型。     

Solid State Synthesis and Structural Characterization of Binuclear Cu(I)-SbPh3 Complex [Cu(SbPh3)2I]2

Dimeric complex [Cu(SbPh3)2I]2 has been synthesized by a solid state reaction at a low heating temperature and its crystal structure has been analyzed by X-ray crystallography. The crystal is monoclinic, space group P21/a (#14), a = 20.436(5), b=14.125(3), c=24.683(3)(A), β=110.67(1)°, Z=4, V=6666(2)(A)3; C72H60Sb4I2Cu2, Mr = 1792, Dc = 1.787 g.cm-3, μ(MoKα) = 31.88 cm-1, F(000)=3440, R=0.038 and Rw=0.043 for 5632 observed reflections (I≥3.0σ(I)) and 361 refined parameters. The result reveals the copper and the bridging iodide atoms form an approximately planar rhomboid array. Effects of the bulkiness of the ligands upon the structures of the analogous complexes are discussed.     

Synthesis,characterization, and biological activity of a Cu(I) complex with 2-(9H-carbazol-9-yl) acetic acid

A new dicopper(I) complex with 2-(9H-carbazol-9-yl) acetic acid (HL) of the formula [Cu₂(dppm)₂L(NO₃)(CH₃OH)] [dppm = bis(diphenylphosphino)methane] was prepared. The complex was structurally characterized by IR, ¹H NMR spectra, and elemental analysis. Single crystal X-ray crystallography revealed that this complex is monoclinic, space group P2₁/c, with a = 13.6552(17) Å, b = 23.123(2) Å, c = 19.257(2) Å, α = γ = 90.00°, β = 106.860(2)°, V = 5818.8(11) ų, Z = 4, D _Calcd = 1.386 mg m^?3, F(000) = 2512, goodness-of-fit = 1.015. The complex was also tested in vitro for its cytotoxic activity using human hepatocellular carcinoma cell line (BEL-7402) and human hepatocellular liver carcinoma cell line (Hep-G2); 5-Fluorouracil was used as a positive control substance. The results indicated that the complex exhibited good cytotoxic activity against both human tumor cell lines.     

Synthesis,and characterization of some Cu(I) complexes having propionitrile and pyridine moieties: An investigation on their antibacterial properties

The aim of producing new biologically active compounds lead to the synthesis of some Cu(I) complexes of general formula [Cu(C₂H₅CN)₄][A] and [Cu(C₅H₅N)₄][A] (1–4) {where A: counter anion = B(C₆F₅)₄⁻ and B{C₆H₃(m-CF₃)₂}₄⁻} from the reaction of CuCl and silver salt of the corresponding counter anion. The complexes were characterized using elemental analysis, ¹H NMR, ¹¹B NMR, FT-IR Spectroscopy, UV–visible spectroscopy and thermo-gravimetric analysis (TGA). The antibacterial activities of all complexes are evaluated by the minimal inhibitory concentration (MIC), using the micro-broth dilution method, against eight bacteria (Gram-negative and Gram-positive), each with fresh clinical isolates. The MIC results were compared with those of Oxytetracycline agent as a positive control. In most cases, the compounds show broad-spectrum activities that were either, more active, or equipotent to, the antibiotic agent in the comparison tests. Complex 4 showed the greatest activity against Proteus mirabilis (Gram- negative) with a minimum inhibitory concentration (MIC) of 8 µg/mL, while complexes 2 and 3 showed the lowest activity against Pseudomonas aeruginosa (Gram-negative) and against Staphylococcus aureus (Gram-positive) with a concentration of 512 µg/mL.     

Structure and spectroscopic properties of the dimeric copper(I) N‐heterocyclic carbene complex [Cu2(CNCt‐Bu)2](PF6)2

In recent years, the use of copper N‐heterocyclic carbene (NHC) complexes has expanded to fields besides catalysis, namely medicinal chemistry and luminescence applications. In the latter case, multinuclear copper NHC compounds have attracted interest, however, the number of these complexes in the literature is still quite limited. Bis[μ‐1,3‐bis(3‐tert‐butylimidazolin‐2‐yliden‐1‐yl)pyridine]‐1κ⁴C²,N:N,C^2′;2κ⁴C²,N:N,C^2′‐dicopper(I) bis(hexafluoridophosphate), [Cu₂(C₁₉H₂₅N₅)₂](PF₆)₂, is a dimeric copper(I) complex bridged by two CNC, i.e. bis(N‐heterocyclic carbene)pyridine, ligands. Each Cu^I atom is almost linearly coordinated by two NHC ligands and interactions are observed between the pyridine N atoms and the metal centres, while no cuprophilic interactions were observed. Very strong absorption bands are evident in the UV–Vis spectrum at 236 and 274 nm, and an emission band is observed at 450 nm. The reported complex is a new example of a multinuclear copper NHC complex and a member of a compound class which has only rarely been reported.     

Synthesis and characterization of polymer linked copper(I) bis(N‐heterocyclic carbene) mechanocatalysts

In this paper, the synthesis and characterization of a series of latent polymeric bis(N‐heterocyclic carbene) (NHC) copper(I) complexes is reported, which can be activated for the copper(I)‐catalyzed azide/alkyne cycloaddition (CuAAC) via ultrasound. To prove the influence of chain length and nature of the polymer towards the activation, poly(isobutylene) (PIB), poly(styrene) (PS) and poly(tetrahydrofuran) (PTHF) are synthesized via living polymerization techniques (LCCP, ATRP, CROP) obtaining different chain lengths (from 2500 to 9000 g/mol), followed by quaternization with N‐methylimidazole, generating the corresponding N‐methylimidazolium‐telechelic polymers. The deprotonation of these macroligands via strong bases like sodium tert‐butoxide (NaO^tBu) or potassium hexamethyldisilazide (KHMDS) yields the free N‐heterocyclic carbenes (NHCs), which are used to coordinate to tetrakis(acetonitrile)copper(I) hexafluorophosphate, forming the final polymer‐based mono‐ and bis(N‐methylimidazole‐2‐ylidene) copper(I)X complexes. The structural proof of these complexes is accomplished via ¹H‐NMR spectroscopy, MALDI‐TOF‐MS and GPC‐techniques. The activation of the copper(I) biscarbene catalysts by ultrasound is studied by GPC, revealing the cleavage of one shielding NHC‐ligand. The initial catalytic latency and the via ultrasound introduced catalytic activation is successfully demonstrated monitoring a CuAAC “click” reaction of benzyl azide and phenylacetylene by in situ ¹H‐NMR spectroscopy introducing thus “click” conversions up to 97%. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3893–3907     

Bipyridyl/carbazolate silver(I) and gold(I) N-heterocyclic carbene complexes: A systematic study of geometric constraints and electronic properties

A series of silver(I) and gold(I) carbene complexes of the type [M(L)(2,2′-bipyridine)][PF₆] (L = 1-benzyl-3-(2-pyridylmethyl)benzimidazolylidene; M = Ag ( 1 ); M = Au ( 3 )) and [M(L)(carbazole)] (M = Ag ( 2 ); M = Au ( 4 )) were synthesized and analyzed using a range of spectroscopic and crystallographic techniques. Inspection of the solid-state structures of 1 , 2 and 4 revealed a number of intermolecular noncovalent interactions. In the solid-state structure adopted by 1 , π–π and Ag–Ag interactions directed the complexes to orient in a head-to-tail fashion. The photophysical properties were found to be influenced by the ancillary ligands in solution as well as in the solid-state. Calculations were performed to support the aforementioned structural and optoelectronic assignments.     

Synthesis,spectral characterization and structural investigation on some 4-aminoantipyrine containing Schiff base Cu(II) complexes and their molecular association

Compounds [Cu(L₁)₂] (1) and [Cu(L₂)₂] (2), where L₁ and L₂ are Schiff base ligands of 4-aminoantipyrine and substituted salicylaldehydes, were synthesized and characterized using various spectroscopic techniques such as elemental analysis, UV–Vis, IR, and NMR. The single crystal X-ray structures for L₁, L₂, and their corresponding Cu(II) complexes assembled in a 1:2 metal to ligand ratio were analyzed for their various weak H-bonding and dimeric association. The structural analysis of compounds 1 and 2, being the first crystal structures in this series, deserves special attention to help further the understanding in this area of structure–reactivity correlation studies. Further these compounds, composed of very similar chemical composition with a small difference in the substituent on the salicylaldehyde moiety, influenced through various weak inter- and intramolecular H-bonding and C–H?π interactions, rearrange the geometry around Cu(II) from a tetrahedrally distorted square planar geometry in [Cu(L₁)₂] (1) to square planar in [Cu(L₂)₂] (2). Steric strain imposed by the methyl substitution on the 4-aminoantipyrine moiety of the Schiff base ligand, causing this small change of the Cu(II) geometry, along with various weak interactions is analyzed in detail.     

Construction of polymeric Cu(I) N-heterocyclic carbene complex utilizing terpyridine-Fe(II) as linkers: formation of an efficient and recyclable catalyst

A metal-coordination-driven self-assembly using the predesigned building block has been developed. Herein, the catalytic active NHC–Cu(I) units were introduced into the terpyridine metal coordination polymers. The self-assembled architecture, as a heterogeneous catalyst, was successfully used to catalyze the A³-coupling reaction of aldehyde, alkyne, and amine and Huisgen 1,3-dipolar cycloaddition reaction of azide and alkyne in high yields.     

Copper(I) bromide and chloride complexes with urotropine and triethylenediamine: synthesis,crystal structure,and Raman characterization*

Abstract

In the present study, the oxidative dissolution of metallic copper has been explored with the intention to prepare some new complexes with urotropine (hmta) and triethylenediamine (dabco) ligands. All the compounds synthesized were characterized by single-crystal X-ray diffraction and Raman spectroscopy. Reactions performed in a DMSO/CuCl₂?2H₂O mixture resulted in [(μ-Cl)₂Cu^I(hdabco⁺)Cu^I(μ-Cl)(κS-DMSO)]_n and [Cu^ICl(hmta)₂] complexes. Their isostructural bromide analogs [(μ-Br)₂Cu^I(hdabco⁺)Cu^I(μ-Br)(κS-DMSO)]_n and [Cu^IBr(hmta)₂] were prepared by the reaction of elemental copper with respective ligands in a DMSO/CBr₄ mixture. Early interrupted reaction of the copper wire with the DMSO/CBr₄/dabco solution resulted in an appearance of crystals of the [Cu^I₂Br₂(CO)₂(dabco)]_n carbonyl complex on the copper surface. It arises with the participation of in situ formed carbon monoxide. Despite the identical stoichiometry, the crystal structure of the [Cu₂Br₂(CO)₂(dabco)]_n complex is markedly different from that of a known [Cu₂Cl₂(CO)₂(dabco)]_n analog.     

Synthesis, structure, spectroscopic properties, electrochemistry, and DFT correlative studies of N-[(2-pyridyl)methyliden]-6-coumarin complexes of Cu(I) and Ag(I)

6-Aminocoumarin reacts with pyridine-2-carboxaldehyde and has synthesized N-[(2-pyridyl)methyliden]-6-coumarin (L). The ligand, L, reacts with [Cu(MeCN)₄]ClO₄/AgNO₃ to synthesize Cu(I) and Ag(I) complexes of formulae, [Cu(L)₂]ClO₄ and [Ag(L)₂]NO₃, respectively. While similar reaction in the presence of PPh₃ has isolated [Cu(L)(PPh₃)₂]ClO₄ and [Ag(L)(PPh₃)₂]NO₃. All these compounds are characterized by FTIR, UV-Vis and ¹H NMR spectroscopic data. In case of [Cu(L)(PPh₃)₂]ClO₄ and [Ag(L)(PPh₃)₂]NO₃, the structures have been confirmed by X-ray crystallography. The structure of the complexes are distorted tetrahedral in which L coordinates in a N,N′ bidentate fashion and other two coordination sites are occupied by PPh₃. The ligand and the complexes are fluorescent and the fluorescence quantum yields of [Cu(L)(PPh₃)₂]ClO₄ and [Ag(L)(PPh₃)₂]NO₃ are higher than [Cu(L)₂]ClO₄ and [Ag(L)₂]NO₃. Cu(I) complexes show Cu(II)/Cu(I) quasireversible redox couple while Ag(I) complexes exhibit deposition of Ag(0) on the electrode surface during cyclic voltammetric experiments. gaussian 03 computations of representative complexes have been used to determine the composition and energy of molecular levels. An attempt has been made to explain solution spectra and redox properties of the complexes.