Plant DNA fingerprinting with radioactive and digoxigenated oligonucleotide probes complementary to simple repetitive DNA sequences

The existence of hypervariable DNA sequences in nuclear genomes, and the use of appropriate "fingerprinting" probes to detect them, has gained widespread scientific interest, and also led to multiple applications in diverse areas. Two years ago, the new technique of "DNA fingerprinting" was also introduced into the analysis and characterization of plant genomes, initially by using human or M13 minisatellites as probes. In the present article, we demonstrate the applicability for plant DNA fingerprinting of oligonucleotide probes specific for simple repetitive DNA sequences. We show that various levels of intra- and interspecific polymorphisms can be detected; the information to be gained depends on the optimal combination of probe and species. Variety-specific patterns were obtained in several cases. Some probes revealed variability between individuals. Somatic variability was not observed. Different DNA isolation and purification procedures were tested in order to introduce a fast and easy-to-perform isolation method suitable for a large variety of plant species. Nonradioactive fingerprinting was performed using digoxigenated oligonucleotides as probes. Banding patterns obtained with radioactive and digoxigenin-based labeling techniques proved to be of similar quality.     

Input-dependent induction of oligonucleotide structural motifs for performing molecular logic

The K(+)-H(+)-triggered structural conversion of multiple nucleic acid helices involving duplexes, triplexes, G-quadruplexes, and i-motifs is studied by gel electrophoresis, circular dichroism, and thermal denaturation. We employ the structural interconversions for perfoming molecular logic operations, as verified by fluorimetry and colorimetry. Short G-rich and C-rich cDNA and RNA single strands are hybridized to produce four A-form and B-form duplexes. Addition of K(+) triggers the unwinding of the duplexes by inducing the folding of G-rich strands into DNA- or RNA G-quadruplex mono- and multimers, respectively. We found a decrease in pH to have different consequences on the resulting structural output, depending on whether the C-rich strand is DNA or RNA: while the protonated C-rich DNA strand folds into at least two isomers of a stable i-motif structure, the protonated C-rich RNA strand binds a DNA/RNA hybrid duplex to form a Y·RY parallel triplex. When using K(+) and H(+) as external stimuli, or inputs, and the induced G-quadruplexes as reporters, these structural interconversions of nucleic acid helices can be employed for performing logic-gate operations. The signaling mode for detecting these conversions relies on complex formation between DNA or RNA G-quadruplexes (G4) and the cofactor hemin. The G4/hemin complexes catalyze the H(2)O(2)-mediated oxidation of peroxidase substrates, resulting in a fluorescence or color change. Depending on the nature of the respective peroxidase substrate, distinct output signals can be generated, allowing one to operate multiple logic gates such as NOR, INH, or AND.     

Design and utility of oligonucleotide gene probes for fungal polyketide synthases

BACKGROUND: Recent advances in the molecular biology of polyketide biosynthesis have allowed the engineering of polyketide synthases and the biological ('combinatorial') synthesis of novel polyketides. Additional structural diversity in these compounds could be expected if more diverse polyketide synthases (PKS) could be utilised. Fungal polyketides are highly variable in structure, reflecting a potentially wide range of differences in the structure and function of fungal PKS complexes. Relatively few fungal synthases have been investigated, perhaps because of a lack of suitable genetic techniques available for the isolation and manipulation of gene clusters from diverse hosts. We set out to devise a general method for the detection of specific PKS genes from fungi. RESULTS: We examined sequence data from known fungal and bacterial polyketide synthases as well as sequence data from bacterial, fungal and vertebrate fatty acid synthases in order to determine regions of high sequence conservation. Using individual domains such as beta-ketoacylsynthases (KS), beta-ketoreductases (KR) and methyltransferases (MeT) we determined specific short (ca 7 amino acid) sequences showing high conservation for particular functional domains (e.g. fungal KR domains involved in producing partially reduced metabolites; fungal KS domains involved in the production of highly reduced metabolites etc.). Degenerate PCR primers were designed matching these regions of specific homology and the primers were used in PCR reactions with fungal genomic DNA from a number of known polyketide producing species. Products obtained from these reactions were sequenced and shown to be fragments from as-yet undiscovered PKS gene clusters. The fragments could be used in blotting experiments with either homologous or heterologous fungal genomic DNA. CONCLUSIONS: A number of sequences are presented which have high utility for the discovery of novel fungal PKS gene clusters. The sequences appear to be specific for particular types of fungal polyketide (i.e. non-reduced, partially reduced or highly reduced KS domains). We have also developed primers suitable for amplifying segments of fungal genes encoding polyketide C-methyltransferase domains. Genomic fragments amplified using these specific primer sequences can be used in blotting experiments and have high potential as aids for the eventual cloning of new fungal PKS gene clusters.     

Synthesis and evaluation of a new non-fluorescent quencher in fluorogenic oligonucleotide probes for real-time PCR

A non-fluorescent quencher, based on the diaminoanthraquinone Disperse Blue 3, has been incorporated into oligonucleotides at the 5'-end, the 3'-end and internally as a thymidine derivative. Fluorimetry and fluorogenic real-time PCR experiments demonstrate that the quencher is effective with a wide range of fluorescent dyes. The anthraquinone moiety increases the melting temperature of DNA duplexes, thus allowing shorter, more discriminatory probes to be used. The quencher has been used in Scorpion primers and TaqMan probes for human DNA sequence recognition and mutation detection.     

Trace analysis of an oligonucleotide with a specific sequence using PNA-based ion-channel sensors

The gold electrodes modified with self-assembled monolayers of a 13-mer peptide nucleic acid (PNA) probe and 8-amino-1-octanethiol were used for the detection of a complementary oligonucleotide at a femtomolar level using the ion-channel sensor technique. No response to a one-base mismatched oligonucleotide was observed. The electrode surface was positively charged in a pH 7.0 buffer solution due to the protonation of an amine group of the thiol, where the electron transfer between the positively charged marker [Ru(NH3)6]3+ and the surface was hindered because of the charge-charge repulsion between them. Binding of the negatively-charged complementary oligonucleotide to the probe cancels the positive charge at the surface, and provides an excess negative charge at the surface, thereby facilitating the access of the marker to the electrode surface and its redox reaction. Using a 13-mer PNA probe for this sensing mode, we achieved the detection of the oligonucleotide at a femtomolar (approximately 10-15 M) level, improved by five orders of magnitude than the previously used 10-mer PNA probe.     

Forensics of birds of prey by DNA fingerprinting with 32P-labeled oligonucleotide probes.

Paternity tests on confiscated families of eight species of birds of prey were carried out successfully by DNA fingerprinting with 32P-labeled oligonucleotide probes. Variations in the number of hybridized fragments, depending on the species of birds, are observed using the same probe, as well as differences of polymorphism by hybridizing the DNA samples with several oligonucleotide probes.     

Profiling the specific reactivity of the proteome with non-directed activity-based probes

BACKGROUND: The field of proteomics aims to characterize dynamics in protein function on a global level. However, several classes of proteins, in particular low abundance proteins, remain difficult to characterize using standard proteomics technologies. Recently, chemical strategies have emerged that profile classes of proteins based on activity rather than quantity, thereby greatly facilitating the analysis of low abundance constituents of the proteome. RESULTS: In order to expand the classes of proteins susceptible to analysis by activity-based methods, we have synthesized a library of biotinylated sulfonate esters and applied its members to complex proteomes under conditions that distinguish patterns of specific protein reactivity. Individual sulfonates exhibited unique profiles of proteome reactivity that in extreme cases appeared nearly orthogonal to one another. A robustly labeled protein was identified as a class I aldehyde dehydrogenase and shown to be irreversibly inhibited by members of the sulfonate library. CONCLUSIONS: Through screening the proteome with a non-directed library of chemical probes, diverse patterns of protein reactivity were uncovered. These probes labeled protein targets based on properties other than abundance, circumventing one of the major challenges facing contemporary proteomics research. Considering further that the probes were found to inhibit a target enzyme's catalytic activity, the methods described herein should facilitate the identification of compounds possessing both selective proteome reactivities and novel bioactivities.     

Endonuclease V-assisted accurate cleavage of oligonucleotide probes controlled by deoxyinosine and deoxynucleoside phosphorothioate for sequencing-by-ligation

Sequencing-by-ligation (SBL) is one of the next-generation sequencing methods for massive parallel sequencing. The ligated probes used in SBL should be accurately cleaved for a better ligation in the next cycle. Here, a novel kind of oligonucleotide probe that could be accurately cleaved at the given position was proposed. Deoxynucleoside phosphorothioates were introduced into the deoxyoxanosine-containing oligonucleotide probes in order to increase the cleavage accuracy of endonuclease V on double-stranded DNA templates. The results illustrated that incorporating deoxynucleoside phosphorothioates could greatly reduce the effect of the nonsynchronous sequencing primer, and the queried bases of the DNA templates were unambiguously identified with 5 cycles of sequencing ligations. Additionally, the read length can reach up to 25 bp with high accuracy. The SBL-based method is inexpensive, has high-throughput, and is easy to operate allowing massive scale-up, miniaturization and automation.     

A simple and rapid detection of viral protein using RNA oligonucleotide in a biosensor

The monitoring of non-structural viral protein 3 (NS3) has been of considerable interest in developing simple and reliable methods for detection of hepatitis C virus (HCV) for applications in diagnostic medicine. Although enzyme-linked immunosorbent assay (ELISA) is the most general method in HCV detection, using antibody brings problems. This method is temperature-sensitive and requires specific reactions condition. In addition, secondary antibody conjugated with enzyme and fluorescent dye is required. To overcome these bottlenecks, we designed a streptavidin-biotin conjugation method, namely, the RNA oligonucleotide sensor system that could monitor viral protein with detection limit of 500 pg/mL by using biotin-tagged RNA oligonucleotide in forteBio??s Octet optical biosensor system. In this study, we proposed an efficient method for simple and convenient detection of HCV viral protein, with the advantage of target specific monitoring.     

Duplex probes: a new approach for the detection of specific nucleic acids in homogenous assays

A novel method for the detection of specific nucleic acids in homogenous solution was developed. The method is based on the use of duplex probes in which fluorescent donor and quencher labeled on either oligonucleotide are held in close proximity, so that fluorescence is quenched. Amplification of the target sequence results in the cleavage of the probe and the resulting fluorescence can be detected. The fluorescent data analysis demonstrated that the duplex probes can specifically recognize the presence of target, and a significantly higher lever of relative fluorescent signal than TaqMan probes is obtainable. Combined with real-time PCR instruments, the assay can be used to quantify the input target molecules. As few as five copies of initial target molecules can be detected, and a large dynamic linear ranger (five orders of magnitude) is obtained.     

Fast separation of oligonucleotide and triplet repeat DNA on a microfabricated capillary electrophoresis device and capillary electrophoresis

A laser-induced fluorescence detection system coupled with a highly sensitive silicon-intensified target (SIT) camera is successfully applied to the imaging of a band for DNA fragment labeling by fluorescence dye in a microchannel, and to the visualizing of the separation process on a microfabricated chip. We demonstrated that an only 6 mm separation channel is sufficient for the separation of triplet repeat DNA fragment and DNA molecular marker within only 12 s. The separation using the microfabricated capillary electrophoresis device is confirmed to be at least 18 times faster than the same separation carried out by conventional capillary electrophoresis with 24.5 cm effective length. The use of a short capillary with 8.5 cm effective length is also efficient for fast separation of DNA; however, the microchip technology is even faster than capillary electrophoresis using a short capillary.     

Analysis of the factors affecting the accuracy of detection for single base alterations by oligonucleotide microarray

The oligonucleotide microarray, a high-throughput polymorphism detection technology, holds great promise for the characterization of complex genetic variance. To achieve greater sensitivity and specificity for it to be an effective platform technology we present results and discuss some of the factors influencing signal intensities and single-mismatch discrimination in array-based mutation/SNP detection. Probes with a series of concentrations were spotted onto the slide in order to find the optimal concentration with the identifiable satisfying signals and the stable ratios between matched and mismatched probes. It was found that under our experimental conditions, when the initial probe concentration is higher than the maximum immobilization capability of the slide (7.5 microM), the hybridization signal will be saturated and the ratio between matched and mismatched probes will be more stable than at a lower probe concentration. Considering the cost of probes and the systematic stability, a constant spotting concentration of 10 microM was selected. The stability of different types of mismatched oligo-DNA duplexes on the glass surface was also confirmed. The results show that the order of stability of mismatched oligo-DNA duplexes on a glass surface is in general agreement with previous reports conducted using liquid and polyacrylamide gel pads. This suggests that the influence of the mismatched base pair on the stability of the duplex in a solid hybridization system is similar to that in the solution hybridization environment.     

Alteration of the selectivity of hybridization of immobilized oligonucleotide probes by co-immobilization with charged oligomers of ethylene glycol

A significant challenge exists in the creation of an environment for immobilized probe oligonucleotides that offer good structural regularity and reproducibility, where nearest neighbour interactions provide for control of selectivity, yet where the degree of hybridization does not alter nearest neighbour interactions. This new work explores whether a “matrix isolation” method will produce the desired environment for the probe molecules. The DNA oligonucleotide probes are polyelectrolytes with charged backbones and significant flexibility. It is possible to isolate the probe molecules by surrounding each, on average, with a sheath of immobilized oligomer that is not based on complementary nucleic acid, yet that is a polyelectrolyte in order to control the surface density and charge within the mixed film. Preliminary work investigates a mixture of dT₂₀ as the probe oligonucleotide, and a 20-mer oligomer primarily containing ethylene glycol phosphate, as a matrix isolation material in a 1:20 mole ratio, respectively. Melt temperature (T_m) measurements indicate that the thermodynamic stability of the probe molecules can be adjusted using the oligomer matrix to achieve lower T_m values by up to 5 °C, with full retention of selectivity for discrimination of single base pair mismatches even under conditions where the probes at a surface are saturated with complementary target.     

Reversible complex formation in organic chemical microscopy: a simple specific test for HMX

The decomposition of molecular complexes can sometimes be rendered optically distinctive and highly specific for the identification of certain compounds in the presence of closely related ones. The procedure is exemplified by a simple and specific qualitative test for HMX(1,3,5,7-tetranitro-1,3,5,7-tetraazacyclo-octane).     

Biosensor discrimination of meat juice from various animals using a lectin panel and ellipsometry

In this work, simple microcontact printed gold-wafers were used to make a lectin panel for investigation and discrimination of different meat juices from fresh meat of cattle, chicken, pig, cod, turkey and lamb. Seven different lectins were thus attached to gold surfaces using the streptavidin-biotin method. Lectins recognize and bind specifically to carbohydrate structures present on different proteins. The biorecognition was evaluated with null ellipsometry and the data obtained was related to an internal standard of lactoferrin. The data was evaluated with multivariate data analysis techniques to identify possible discrimination or grouping of data. Scanning ellipsometry was used for visualization of the binding pattern of the lectins and the meat juice proteins. The two-dimensional images obtained could be used to visualize the protein distribution, furthermore, to exclude anomalies. The results showed that the different meat juices from the six different species: cattle, chicken, pig, cod, turkey and lamb could be discriminated from each other. The results showed to be more repetitive for the mammalian meat juices. Using a simple model based on an artificial neuronal net, it was also possible to classify meat juices from the mammals investigated.     

A fluorescent molecular switch for room temperature operation based on oligonucleotide hybridization without labeling of probes or targets

A molecular switch was prepared by self-assembly. Neutravidin served as a template that allowed for a biotinylated probe oligonucleotide to be placed adjacent to a biotinylated long-chain linker that was terminated with thiazole orange (TO). Hybridization of probe oligonucleotide with target to form double-stranded DNA resulted in intercalation of the adjacent TO probe. This was a reversible process that could be tracked by fluorescence intensity changes. Formamide was used as a denaturant for double-stranded DNA, and could be used to depress thermal denaturation temperatures. In this work formamide had a dual function, providing for control of hybridization selectivity at room temperature, while concurrently ameliorating non-specific adsorption to improve signal-to-noise when using thiazole orange as a fluorescence signalling agent to determine oligonucleotide hybridization. Room temperature single nucleotide polymorphism (SNP) discrimination for oligonucleotide targets was achieved both in solution and for molecular switches that were immobilized onto optical fibers. In solution, a concentration of 18.5% formamide provided greater than 40-fold signal difference between single-stranded DNA and double-stranded DNA, in contrast to only a 2-fold difference in the absence of formamide. Selectivity for SNP determination in solution was demonstrated using targets of varying lengths including a 141-base PCR amplicon. The improved signal-to-noise achieved by use of formamide is likely due to preferential displacement of dye molecules that are otherwise electrostatically bound to the polyanionic nucleic acid backbone.     

A simple method for preparation of high specific activity128I

The preparation of high specific activity¹²⁸I by neutron activation of KIO₃ is described. The¹²⁸I^– produced in a Szilard-Chalmers process is eluted with a water-isopropylamine mixture which dissolves only KI but not KIO₃.     

A simple method for the determination of the partitioning of nitroxide probes in microheterogeneous media

The use of the ESR g‐factor of spin labels for the easy and clean assessment of their partitioning in microheterogeneous media is described. The method constitutes a valuable alternative in those cases where the classical Benesi–Hildebrand treatment, based on UV–visible measurements, is difficult or not feasible. Copyright © 2012 John Wiley & Sons, Ltd.