低密度聚乙烯/乙丙烯三元共聚(LDPE/EPO)共混体系的相容性及其结晶结构

DDV、DSC、WAXD、萃取和Raman光谱实验表明,在所有组成下,LDPE/EPO共混体系共晶相容.WAXD法测定表明,LDPE/EPO共混体系的结晶度随EPO组分含量的增加而降低,EPO未能进入LDPE晶胞中.     

LDPE／EVA共混体系的结晶行为

本文通过DSC、WAXD、偏光显微镜、DMA等方法,对LDPE/EVA共混体系进行了研究。结果表明,EVA可使LDPE的熔融峰温提高15℃。并在LDPE结晶过程中起稀释剂作用。LDPE/EVA共混体系为非晶相相容。     

低密度聚乙烯/乙丙烯三元共聚(LDPE/EPO)共混体系的相容性及其结晶结构

 DDV、DSC、WAXD、萃取和Raman光谱实验表明,在所有组成下,LDPE/EPO共混体系共晶相容.WAXD法测定表明,LDPE/EPO共混体系的结晶度随EPO组分含量的增加而降低,EPO未能进入LDPE晶胞中.     

不同分子量的高密度聚乙烯与茂金属线型低密度聚乙烯的相容性

采用动态流变学测试和结晶动力学的方法研究了两种分子量的高密度聚乙烯(HDPE)与茂金属线型低密度聚乙烯(m-LLDPE)共混体系的相容性.流变学研究表明,HDPE/m-LLDPE共混物在低ω区域lgG′-lgω关系曲线偏离线性规律,在熔融态为非均相体系.DSC分析发现HDPE/m-LLDPE共混物体系中HDPE的熔点随着m-LLDPE含量的增多而逐渐下降,说明HDPE与m-LLDPE二者具有机械相容性.当HDPE在m-LLDPE的熔体中等温结晶,分子量较高的HDPE结晶速率与纯HDPE相近,m-LLDPE的含量变化对Avrami指数n的影响不大;分子量较低的HDPE指数n和半结晶时间t1/2随m-LLDPE含量的增加逐渐增大,结晶速率随着m-LLDPE含量的增加逐渐下降,表明熔融态的m-LLDPE和HDPE存在着较强的分子间相互作用,二者具有一定的相容性.     

PTT/PET共混体系晶体形态与结晶性能的研究

用差示扫描量热仪(DSC)、广角X射线衍射(WAXD)和正交偏光显微镜研究了聚对苯二甲酸丙二酯(PTT)和聚对苯二甲酸乙二酯(PET)共混体系的晶体形态与结晶性能.结果表明,共混体系结晶性能与PTT的含量有关.PET的加入,使共混体系的球晶尺寸减小.球晶完善性降低.当PTT含量为40wt%～60wt%时,共混物分别出现了双重熔融峰和双重结晶峰.双重熔融峰是加热过程中熔融重结晶造成的,双重结晶峰说明不完善的晶体产生的次级结晶.     

聚乙烯醇／壳聚糖合金膜的相容性

本文通过 WAXD、DSC动态力学和应力一应变测量对 PVA/CS合金膜的聚集态结构进行了研究。发现,合金膜中的PVA结晶完善性变差,结晶度和结晶熔融峰温度随CS含量增加而降低。合金膜中的CS晶型发生了转化。动态力学损耗谱显示,合金膜中仍保持单组分的玻璃化松弛。当PVA含量大于50%％时,两个Tg峰中间产生一新的力学损耗峰。合金膜的模量和断裂强度高于单组分,而断裂伸长率低于单组分,这都表明,PVA与CS间存在强的相互作用,该共混体系为部分相容体系。     

聚L-乳酸/4,4'-二羟基二苯硫醚共混物的分子间相互作用及结晶和熔融行为

利用红外吸收光谱(FTIR)研究了聚乳酸(PLLA)/4,4'-二羟基二苯硫醚(TDP)熔融共混物的分子间相互作用,结果表明,PLLA的羰基与TDP的羟基之间形成了分子间氢键.通过差示扫描量热(DSC)研究了共混物的玻璃化转变行为及非等温结晶和熔融行为.结果表明,样品的玻璃化转变温度(Tg)随TDP含量的增加呈线性下降.共混物的熔融结晶温度(Tc)、结晶焓(ΔHc)、熔融温度(Tm)及熔融焓(ΔHm)均随TDP含量的增加呈下降趋势,而冷结晶温度的变化趋势则相反.当TDP达到40%(质量分数)时,共混物的DSC曲线既未出现结晶峰,也未出现熔融峰,表明该样品已完全成为非晶态物质.广角X射线衍射(WAXD)分析结果表明,TDP的加入未改变PLLA的晶型,但导致其晶面间距变大,晶体结构变得松散.因此共混物熔点的下降归因于分子间氢键的形成降低了PLLA分子链的运动能力及晶体的紧密程度而非晶型的改变.     

PC/PET/EPDM共混体系的结晶与熔融行为

本文用解偏振光法与DSC法分别测定并研究了PC/PET/EPDM共混体系的结晶速度、结晶度、Avrami指数(n)和熔融温度及其影响因素,共混物中PET的结晶速度、结晶度均随PC含量增加而下降;EPDM用量不超过10%时,可提高PET的结晶速度,但不影响结晶度和成核与增长方式,n值不变。当EPDM为5%时,结晶速度呈现极大值。经退火处理的共混物呈现熔融双峰,PC量增加,高温熔融峰略移向高温方向;热处理温度升高或时间延长,则低温熔融峰移向高温方向。     

聚乙烯醇/聚乙烯基吡咯烷酮共混体系的结晶行为

用DSC、WAXD和SAXS研究了聚乙烯醇(PVAl)/聚乙烯基吡咯烷酮(PVP)共混体系的结晶行为.PVAl的结晶度随PVP含量增加而减少,并存在结晶度为零的组成(PVAl)的重量分数约为50％.与纯PVAl相比,共混物的温度区间T_m-T_g减小,表明PVP对PVAl的结晶起抑制作用.共混物中PVAl的结晶速度下降,具体表现为PVAl过冷区随PVP含量增加而扩大,动力学速度常数减小,球晶增长速度下降.纯PVAl和共混体系的等温结晶速率均遵循Avrami方程.退火样品的长周期、片晶厚度和过渡层厚度大于相同组成未退火样品.两者长周期随PVP含量增长加显著增大,片晶厚度增长次之,过渡层厚度变化不大.     

高密度聚乙烯共混调控烯烃嵌段共聚物拉伸性能

通过熔融共混法制备了高密度聚乙烯(HDPE)与烯烃嵌段共聚物(OBC)的共混物,研究了HDPE含量对共混体系结晶和拉伸行为的影响.实验结果表明,共混物熔体存在相分离.结晶时两组分互相影响,出现共结晶现象.共混物具有优异弹性回复与高断裂伸长率,而拉伸模量与断裂强度随着HDPE含量增加而逐渐增大.借助Slip-link橡胶弹性理论对应力应变曲线进行了分析,发现拉伸曲线可以很好的用理论模型进行拟合.将共混物的微观结构变化同模型参数进行了对比,建立了共混物结构和性能的有效关联.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.