MFI纳米片沉积层气相转化制备超薄b轴取向沸石膜

利用乙二胺-水蒸汽进行气相转化（VPT）制备超薄、取向MFI沸石膜,通过将MFI纳米片沉积层转化为致密的沸石膜,实现了膜厚度的有效控制。扫描电子显微镜和X射线衍射表明,制备的沸石膜膜厚度约为280 nm,具有高度b轴取向的致密结构。丁烷异构体双组分分离测试结果表明,在333 K下,等物质的量的正丁烷/异丁烷混合物的正丁烷渗透速率和分离因子分别为1.5×10^-7 mol·m^-2·s^-1·Pa^-1和14.8。Na₂SiO₃作为低聚硅源在MFI沸石纳米片二次生长过程中能够提供硅源和碱度,通过在胺类蒸汽中实现MFI沸石纳米片间的融合生长,进一步提高了膜的取向度和致密性。     

MFI纳米片沉积层气相转化制备超薄b轴取向沸石膜

利用乙二胺-水蒸汽进行气相转化(VPT)制备超薄、取向MFI沸石膜,通过将MFI纳米片沉积层转化为致密的沸石膜,实现了膜厚度的有效控制。扫描电子显微镜和X射线衍射表明,制备的沸石膜膜厚度约为280 nm,具有高度b轴取向的致密结构。丁烷异构体双组分分离测试结果表明,在333 K下,等物质的量的正丁烷/异丁烷混合物的正丁烷渗透速率和分离因子分别为1.5×10^-7 mol·m^-2·s^-1·Pa^-1和14.8。Na₂SiO₃作为低聚硅源在MFI沸石纳米片二次生长过程中能够提供硅源和碱度,通过在胺类蒸汽中实现MFI沸石纳米片间的融合生长,进一步提高了膜的取向度和致密性。     

Study of catalase immobilized on a silicate matrix for non-aqueous biocatalysis

Catalytic activity of catalase (CAT) immobilized on a modified silicate matrix to mediate decomposition of meta-chloroperoxibenzoic acid (3-CPBA) in acetonitrile has been investigated by means of quantitative UV-spectrophotometry. Under the selected experimental conditions, the kinetic parameters: the apparent Michaelis constat (K _M ), the apparent maximum rate of enzymatic reaction (V _max ^app ), the first order specific rate constants (k _sp ), the energy of activation (E _a ) and the pre-exponential factor of the Arrhenius equation (Z₀) were calculated. Conclusions regarding the rate-limiting step of the overall catalytic process were drawn from the calculated values of the Gibbs energy of activation ΔG^*, the enthalpy of activation ΔH^*, and the entropy of activation ΔS^*.     

The Viscosity Properties of Sodium Silicate Solutions

Using a NDJ-1 rotational viscometer and an AR500 rheometer, both static and dynamic viscosities of sodium silicate solutions were measured with changes of concentration, temperature, modulus (molar ratio of SiO₂ to Na₂O), shear rate and chemical additives. Static results show that viscosity increases monotonously with concentration varying from 15 to 55%, decreases with temperature rising from 15 to 70 °C, and has a minimum value at a modulus of about 1.8. Measured data can be fitted quantitatively either by the Krieger-Dougherty expression or the Arrhenius equation with good agreement. This fact suggests that the sodium silicate solutions exhibit the properties of a suspension, in which the silicate anions, mainly constructed of Q ¹ and Q ² groups, act as a binder; the colloidal particles mainly constructed of Q ³ and Q ⁴ groups and small cations, act as effective rigid particles. Dynamic results show a shear thickening property in the high shear-rate regime, and a Newtonian property in the low shear-rate regime.     

Preparation and characterization of bismuth silicate nanopowders

Bismuth silicate (Bi₄Si₃O₁₂) nanopowders were prepared by the sol-gel method. Tetraethyl orthosilicate (TEOS) and Bi₂O₃ were used as the starting materials. The precursors were heat-treated at 750°C for 2 h. The size distribution of Bi₄Si₃O₁₂ nanopowders is 40–100 nm. The thermogravimetry and differential thermal analysis (TG-DTA) curves, the X-ray diffraction (XRD) patterns and the transmission electron microscopy (TEM) microphotograph of Bi₄Si₃O₁₂ were discussed. Compared with crystal materials, the excitation and emission spectra of Bi₄Si₃O₁₂ nanopowders indicated a blue shift. Translated from Chinese Journal of Inorganic Chemistry, 2006, 22(7): 1327–1329 (in Chinese)     

Thermodynamic Model for ThO<Subscript>2</Subscript>(am) Solubility in Alkaline Silica Solutions

No thermodynamic data for Th complexes with aqueous Si are available. To obtain such data, extensive studies on ThO₂(am) solubility were carried out as functions of: (1) a wide range of aqueous silica concentrations (0.0004 to 0.14 mol⋅L⁻¹) at fixed pH values of about 10, 11, 12, and 13; and (2) and variable pH (ranging from 10 to 13.3) at fixed aqueous Si concentrations of about 0.006 mol⋅L⁻¹ or 0.018 mol⋅L⁻¹. The samples were equilibrated over long periods (ranging up to 487 days), and the data showed that steady-state concentrations were reached in < 29 days. X-ray diffraction, FTIR, and Raman analyses of the equilibrated solid phases showed that the Th solids were amorphous ThO₂(am) containing some adsorbed Si. The solubility of ThO₂(am) at pH values ranging from 10 to 13.3 at fixed 0.018 mol⋅L⁻¹ aqueous Si concentrations decreases rapidly with an increase in pH, and increases dramatically with an increase in Si concentrations beyond about 0.003 mol⋅L⁻¹ at fixed pH values > 10. The data were interpreted using both the Pitzer and SIT models, and required only the inclusion of one mixed-hydroxy-silica complex of Th [Th(OH)₃(H₃SiO₄)₃²⁻]. Both models provided similar complexation constant values for the formation of this species. Density functional theory calculations predict complexes of this stoichiometry, having six-fold coordination of the Th cation, to be structurally stable. Predictions based on the fitted value of log ₁₀ K ⁰=−18.5±0.7 for the ThO₂(am) solubility reaction involving Th(OH)₃(H₃SiO₄)₃²⁻[ThO₂(am)+3H₄SiO₄+H₂O↔Th(OH)₃(H₃SiO₄)₃²⁻+2H⁺], along with the thermodynamic data for aqueous Si species reported in the literature, agreed closely with the extensive experimental data and showed that under alkaline conditions aqueous Si makes very strong complexes with Th.     

Stacked films immobilization of MBTH in nafion/sol-gel silicate and horseradish peroxidase in chitosan for the determination of phenolic compounds

The stacked-film immobilization of 3-methyl-2-benzothiazolinone hydrazone (MBTH) in hybrid nafion/sol-gel silicate film and horseradish peroxidase (HRP) in chitosan, performed in order to allow the determination of phenolic compounds, was investigated via an optical method. The stacked films were deposited onto a microscope glass slide by a spin-coating technique. The quinone or free radical product formed by the enzymatic reactions of phenolic compounds interacts with MBTH to form azo-dye products, which can be measured spectrophotometrically at a wavelength of 500 nm. The color intensity of the product was found to increase in proportion to the phenolic concentration after 5 min of exposure. The response of the biosensor was linear over concentration ranges of 0.025–0.500, 0.010–0.070 and 0.050–0.300 mM for guaiacol, resorcinol and o-cresol, respectively, and gave detection limits of 0.010, 0.005 and 0.012 mM. The sensor exhibited good sensitivity and stability for at least two months.     

Structural interpretation on silicate network of various silicate minerals by LMMS analysis

Silicates have several kinds of silicate tetrahedral network. Thirteen kinds of silicate minerals with 5 kinds of network structures have been analyzed with laser microprobe mass spectrometry (LMMS) and their spectra showed characteristic patterns according to their network structures. The Si-O fragment ions can be expressed as SiO _n (n 4) for nesosilicates, Si _m O_3m±1 for inosilicates, Si _m O_{5/2m±(m/2+1)} for phyllosilicates and Si _m O_2m±(m+1) for tectosilicates. The Si-O system in the fragment ions in LMMS spectra suggests the pattern of network of tetrahedral SiO₄.     

Hydration behavior of C2S and C2AS nanomaterials, synthetized by sol–gel method

Hydration behavior of dicalcium silicate (C₂S) (Cement chemistry nomenclature is used where C=CaO, S=SiO₂, A=Al₂O₃, S=SO₃) and gehlenite (C₂AS), synthesized by sol–gel method was investigated by means of isothermal heat flow calorimeter at different temperatures. These phases were obtained by crystallization processing at different temperatures from their xerogels (nano-crystalline) prepared by the sol–gel method at ambient temperature. The crystallization of C₂S begins below 600°C and it is well crystallized at 900°C. X-ray diffraction patterns reveal that β-C₂S is formed and it remains stable since after slow cooling. The crystallization of C₂AS xerogels starts with the formation of C₂S, then it reacts with alumina to form mineral C₂AS at 1100°C. The effect of hydration temperature upon the hydration reaction of C₂S obtained at 600 and 900°C and C₂AS annealed at 600 and 1100°C was investigated by means of isothermal calorimeter. An increase in the temperature of hydration brought about initial acceleration of all samples, as indicated by the increased magnitude of peak of calorimetric curves. The microstructure of the samples cured at hydrothermal condition after 1 and 7 days has been examined by means of scanning electron microscopy (SEM). Fine crystals of calcium silicate hydrate (C–S–H) were developed in C₂S samples, while C₂AS has been hydrated to form gehlenite hydrate supplemented by C–S–H.     

Steroidal glycosides of gitogenin from Allium rotundum

Two new steroidal glycosides were isolated by fractionation of total extracted substances from inflorescences and flower stalks of Allium rotundum (Alliaceae). The structures were determined on the basis of chemical transformations, physical constants, and spectral data as 26-O-β-D-glucopyranosyl-(25R)-5α-furostan2α,3β,22α,26-tetraol 3-O-β-D-glucopyranosyl-(1 → 2)[β-D-xylopyranosyl-(1 → 3)]-β-D-glucopyranosyl(1 → 4)-β-D-galactopyranoside (2) and (25R)-5α-spirostan-2α,3β-diol 3-O-β-D-glucopyranosyl-(1 → 3)-βD-glucopyranosyl-(1 → 2)-[β-D-xylopyranosyl-(1 → 3)]-β-D-glucopyranosyl-(1 → 4)-β-D-galactopyranoside (3).     

X-Ray Diffraction and Raman Spectroscopic Study of Bis-(Pyridine Base) Complexes of Cadmium(II) Halogenides

Summary.  The molecular structures of bis-(pyridine base) complexes of cadmium(II) chloride and bromide, where the pyridine base is pyridine ( py), 3-methylpyridine (3-Me-py), 4-methylpyridine (4-Me-py), and 4-ethylpyridine (4-Et-py), were investigated by means of single-crystal X-ray diffraction and Raman spectroscopy. The crystal structures of CdCl₂ py ₂ (1), CdCl₂(3-Me-py)₂ (2), and CdCl₂(4-Me-py)₂ (3) were determined. All crystals are monoclinic; 1: a = 17.784(2), b = 8.666(1), c = 3.8252(7) ?, β = 91.54(1)°, space group: P2₁/n; 2: a = 11.89(1), b = 14.41(1), c = 3.874(6) ?, β = 92.3(1)°, space group: P2₁/a; 3: a = 21.091(2), b = 3.8884(5), c = 18.2317(3) ?, β = 113.64(1)°, space group: C2/c. The structures were refined to R/R _w values (%) of 3.2/5.5, 3.0/5.0, and 3.4/5.1 for 1–3. All cadmium atoms are octahedrally coordinated with the chloride ions forming infinite di-μ-chloro polymeric linear chains and the nitrogen atoms of the pyridine base in trans configuration. The Cd chains are oriented along the c-axis in 1 and 2 and along the b-axis in 3. The crystal structures indicate the absence of a peculiar interaction between the polymeric chains. The Raman spectra of eight complexes were measured in the range of 550–50 cm⁻¹, and the Raman peaks originating from cadmium-halogen vibrations were assigned. The Raman spectra of 1 and 2 are quite alike in the lattice mode vibration region. The resemblance of the cadmium-halogen vibration peaks indicates the same halogenide ion bridged octahedral structure for all complexes. Received March 27, 2001. Accepted (revised) June 19, 2001     

Triterpene glycosides from Kalopanax septemlobum. VI. Glycosides from leaves of Kalopanax septemlobum var. typicum introduced to crimea

Thirteen known glycosides of hederagenin and oleanolic acid and the three new triterpene glycosides of oleanolic acid-28-O-α-L-rhamnopyranosyl-(1→4)-β-D-glucopyranosyl-(1→6)-O-β-D-glucopyranosyl ester 3-O-β-D-glucopyranosyl-(1→4)-O-β-D-xylopyranosyl-(1→ 3)-O-α-L-rhamnopyranosyl-(1→2)-O-α-L-arabinopyranoside of oleanolic acid and the 28-O-α-L-rhamnopyranosyl-(1→4)-O-6-O-acetyl-β-D-glucopyranosyl-(1→ 6)-O-β-D-glucopyranosyl esters 3-O-β-D-xylopyranosyl-(1→3)-O-α-L-rhamnopyranosyl-(1→2)-O-α-L-arabinopyranoside of oleanolic acid and 3-O-β-D-glucopyranosyl-(1→4)-O-β-Dxylopyranosyl-(1→3)-O-α-L-rhamnopyranosyl-(1→ 2)-O-α-L-arabinopyranoside of oleanolic acid were isolated from leaves of Kalopanax septemlobum var. typicum introduced to Crimea. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 40–43, January–February, 2006.     

Catalytic and Thermodynamic Characterization of Endoglucanase (CMCase) from <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> cmc-1

Monomeric extracellular endoglucanase (25 kDa) of transgenic koji (Aspergillus oryzae cmc-1) produced under submerged growth condition (7.5 U mg⁻¹ protein) was purified to homogeneity level by ammonium sulfate precipitation and various column chromatography on fast protein liquid chromatography system. Activation energy for carboxymethylcellulose (CMC) hydrolysis was 3.32 kJ mol⁻¹ at optimum temperature (55 °C), and its temperature quotient (Q ₁₀) was 1.0. The enzyme was stable over a pH range of 4.1–5.3 and gave maximum activity at pH 4.4. V _max for CMC hydrolysis was 854 U mg⁻¹ protein and K _m was 20 mg CMC ml⁻¹. The turnover (k _cat) was 356 s⁻¹. The pK _a1 and pK _a2 of ionisable groups of active site controlling V _max were 3.9 and 6.25, respectively. Thermodynamic parameters for CMC hydrolysis were as follows: ΔH* = 0.59 kJ mol⁻¹, ΔG* = 64.57 kJ mol⁻¹ and ΔS* = −195.05 J mol⁻¹ K⁻¹, respectively. Activation energy for irreversible inactivation ‘E _a(d)’ of the endoglucanase was 378 kJ mol⁻¹, whereas enthalpy (ΔH*), Gibbs free energy (ΔG*) and entropy (ΔS*) of activation at 44 °C were 375.36 kJ mol⁻¹, 111.36 kJ mol⁻¹ and 833.06 J mol⁻¹ K⁻¹, respectively.     

Steroidal glycosides from Allium cyrillii bulbs

Two spirostanol saponins, one of which was a new compound, were isolated among the steroidal glycosides of Allium cyrillii Ten. Bulbs. The structures of these glycosides were established using chemical and spectral analytical methods as β-D-glycopyranosyl-(1 → 2)-[β-D-xylopyranosyl-(1 → 3)]-β-D-glucopyranosyl-(1 → 4)β-D-galactopyranosyl-(1 → 3)-(25R)-5α-spirostan-2α,3β-diol and β-D-glucopyranosyl-(1 → 2)-[4-O-(3hydroxy-3-methylglutaryl)-β-D-xylopyranosyl-(1 → 3)]-β-D-glucopyranosyl-(1 → 4)-β-D-galactopyranosyl(1 → 3)-(25R)-5α-spirostan-2α,3β-diol.     

Development of a highly precise ID-ICP-SFMS method for analysis of low concentrations of lead in rice flour reference materials

Microwave digestion and isotope dilution inductively coupled plasma mass spectrometry (ID-ICP-SFMS) has been applied to the determination of Pb in rice flour. In order to achieve highly precise determination of low concentrations of Pb, the digestion blank for Pb was reduced to 0.21 ng g⁻¹ after optimization of the digestion conditions, in which 20 mL analysis solution was obtained after digestion of 0.5 g rice flour. The observed value of Pb in a non-fat milk powder certified reference material (CRM), NIST SRM 1549, was 16.8 ± 0.8 ng g⁻¹ (mean ± expanded uncertainty, k = 2; n = 5), which agreed with the certified value of 19 ± 3 ng g⁻¹ and indicated the effectiveness of the method. Analytical results for Pb in three brown rice flour CRMs, NIST SRM 1568a, NIES CRM 10-a, and NIES CRM 10-b, were 7.32 ± 0.24 ng g⁻¹ (n = 5), 1010 ± 10 ng g⁻¹ (n = 5), and 1250 ± 20 ng g⁻¹ (n = 5), respectively. The concentration of Pb in a candidate white rice flour reference material (RM) sample prepared by the National Metrology Institute of Japan (NMIJ) was observed to be 4.36 ± 0.28 ng g⁻¹ (n = 10 bottles). Figure Digestion blank of Pb was carefully reduced to approximately 0.2 ng g^-1 which permitted the highly precise determination of Pb at low ng g^-1 level in foodstuff samples by ID-SFMS     

Critical Evaluation of Protonation Constants. Literature Analysis and Experimental Potentiometric and Calorimetric Data for the Thermodynamics of Phthalate Protonation in Different Ionic Media

The protonation constants of phthalate were determined in aqueous NaCl (0.1 ≤ I ≤ 5,mol⋅L⁻¹) and in aqueous Me₄NCl (0.1 mol⋅L⁻¹ ≤ I ≤ 3,mol⋅L⁻¹) at t = 25,^∘C. Experimental data were employed in conjunction with literature data from studies in different ionic media (Et₄NI: 0 ≤ I ≤ 1,mol⋅L⁻¹; NaClO₄: 0.05 mol⋅L⁻¹ ≤ I ≤ 2,mol⋅L⁻¹)to study the dependence on ionic strength using different models, such as the SIT and Pitzer equations, and an Extended Debye-Hückel type equation. Experimental calorimetric data in NaCl and protonation constants at different temperatures in Et₄NI (5 ≤ t ≤ 45^∘C) and in NaClO₄ (15 ≤ t ≤ 35 ^∘C) were also used to study their dependence on temperature. Recommended equilibrium data are reported together with a short discussion of a prospective protocol for drawing these data.     

Oxidation of camphor ethylene dithioacetal

(1R,1′R,2S,4R)-1,7,7-Trimethylspiro[bicyclo[2.2.1]heptane-2,2′-[1,3]dithiolane] 1′-oxide, (1R,2S,3′R,4R)-1,7,7-trimethylspiro[bicyclo[2.2.1]heptane-2,2′-[1,3]dithiolane] 1′,1′,3′-trioxide, and (1R,4R)-1,7,7-trimethylspiro[bicyclo[2.2.1]heptane-2,2′-[1,3]dithiolane] 1′,1′,3′,3′-tetraoxide were synthesized by oxidation of camphor ethylene dithioacetal with m-chloroperoxybenzoic acid at different substrate-tooxidant ratios. The structure of the products was proved by IR and NMR spectroscopy and X-ray analysis.     

Polymorphism and Pressure Driven Thermal Spin Crossover Phenomenon in [Fe( abpt )2(NC X )2] ( X =?S, and Se): Synthesis, Structure and Magnetic Properties

Summary.  The monomeric compounds [Fe(abpt)₂(NCX)₂] (X = S (1), Se (2) and abpt = 4-amino-3,5-bis(pyridin-2-yl)-1,2,4-triazole) have been synthesized and characterized. They crystallize in the monoclinic P2₁/n space group with a = 11.637(2) ?, b = 9.8021(14) ?, c = 12.9838(12) ?, β = 101.126(14)°, and Z = 2 for 1, and a = 11.601(2) ?, b = 9.6666(14) ?, c = 12.883(2) ?, β = 101.449(10)°, and Z = 2 for 2. The unit cell contains a pair mononuclear [Fe(abpt)₂(NCX)₂] units related by a center of symmetry. Each iron atom, located at a molecular inversion center, is in a distorted octahedral environment. Four of the six nitrogen atoms coordinated to the Fe(II) ion belong to the pyridine-N(1) and triazole-N(2) rings of two abpt ligands. The remaining trans positions are occupied by two nitrogen atoms, N(3), belonging to the two pseudo-halide ligands. The magnetic susceptibility measurements at ambient pressure have revealed that they are in the high-spin range in the 2 K–300 K temperature range. The pressure study has revealed that compound 1 remains in high-spin as pressure is increased up to 4.4 kbar, where an incomplete thermal spin crossover appears at around T _1/2 = 65 K. Quenching experiments at 4.4 kbar have shown that the incomplete character of the conversion is a consequence of slow kinetics. Relatively sharp spin transition takes place at T _1/2 = 106, 152 and 179 K, as pressure attains 5.6, 8.6 and 10.5 kbar, respectively. Corresponding author. E-mail: jose.a.real@uv.es Received June 12, 2002; accepted July 1, 2002     

Crystal Structures of Na3PO2S2 · 11H2O and Na3POS3 · 11H2O

Summary.  Single crystals of sodium dithiophosphate undecahydrate (Na₃PO₂S₂ · 11H₂O) and sodium trithiophosphate undecahydrate (Na₃POS₃ · 11H₂O) were grown from aqueous solution. The crystal structures of Na₃PO₂S₂ · 11H₂O (P2₁2₁2₁; a = 1248.1(1), b = 945.2(1), c = 1383.1(1) pm; R ₁ = 0.0202, wR ₂ = 0.0502) and Na₃POS₃ · 11H₂O (Pna2₁; a = 1262.0(2), b = 947.6(2), c = 1431.5(2) pm; R ₁ = 0.0720, wR ₂ = 0.1371) are related to each other in a sense that all constituting units are arranged in similar positions and with similar orientations. The geometries of the anions were determined with high accuracy; thus, the structural parameters of the POS³⁻ ₃ anion were measured for the first time. Received September 25, 2001. Accepted January 21, 2002     

Effect of Constant Glucose Feeding on the Production of Exopolysaccharides by <Emphasis Type="Italic">Tremella fuciformis</Emphasis> Spores

A fed-batch culture system with constant feeding (glucose 80 g L⁻¹, 0.25 ml min⁻¹) was used to study the influence of glucose on cell dry weight and exopolysaccharides production from submerged Tremella fuciformis spores in a 5-L stirred-tank bioreactor. The results showed that high levels of cell mass (9.80 g L⁻¹) and exopolysaccharides production (3.12 g L⁻¹) in fed-batch fermentation were obtained after 1 h of feeding, where the specific growth rate (μ) and exopolysaccharides yield on substrate consumed (YP/S) were 0.267 d⁻¹ and 0.14 g g⁻¹. Unlike batch fermentation, maximal cell mass and exopolysaccharides production merely reached 7.11 and 2.08 g L⁻¹; the specific growth rate (μ) and exopolysaccharides yield on substrate consumed (YP/S) were 0.194 d⁻¹ and 0.093 g g⁻¹, respectively. It is concluded that the synthesis of exopolysaccharides can be promoted effectively when feeding glucose at a late exponential phase.