The effect of poly(ethylene glycol) on the activity and structure of glucose-6-phosphate dehydrogenase in solution

The effect of poly(ethylene glycol), PEG, on the enzymatic activity of glucose-6-phosphate dehydrogenase (G-6-PDH) in the oxidation of glucose-6-phosphate (G-6-P), using NADP+ as co-enzyme was investigated. The enzymatic activity was determined by means of spectrophotometry in three different media: pure Tris–HCl buffer, solution of PEG400 (20 wt.%) and of PEG4000 (20 wt.%), both in buffer. Comparing the enzymatic activity values measured in pure buffer with those in the polymer solutions, an increase in the enzymatic activity of 20% was observed in the presence of PEG400 as well as in PEG4000. Calorimetric studies indicated the absence of preferential interactions between G-6-PDH and PEG400 or PEG4000. Nevertheless, the interaction enthalpy, ΔH_int, between NADP+ and PEG400 and PEG4000 amounted to −9.3 and −26.7 kJ/mol, respectively. Small angle X-ray scattering (SAXS) measurements were performed in a higher concentration range. Data analysis performed from SAXS curves by means of the intra-particle distance distribution function p(r) and Guinier plots yielded for G-6-PDH in pure buffer and PEG400 solutions radius of gyration, R_g, of about 70 Å and in PEG4000 solutions, R_g of about 40 Å. The latter has the same dimension as that found in the dimeric crystallographic structure of G-6-PDH, evidencing that G-6-PDH preserves its dimeric configuration in PEG4000 solution. On the contrary, different aggregates of G-6-PDH are formed in the presence of either buffer or PEG400. These findings show that the presence of PEG in solution can exert an effect on the enzyme structure and activity.     

A highly stereoselective asymmetric synthesis of (--)-lobeline and (--)-sedamine

A highly stereoselective asymmetric synthesis of (--)-sedamine and (--)-lobeline is described from benzaldehyde in 16 and 17 steps with an overall yield of 20% and 14%, respectively. The key intermediate syn-3,4-epoxyalcohol was prepared in a highly diastereomeric fashion (>99% ee, dr) and served as a common intermediate for both alkaloids.     

Stereoselective synthesis of functionalised carbocyclic amides: construction of the syn-(4aS,10bS)-phenanthridone skeleton

A new synthetic approach has been developed for the preparation of 7-deoxypancratistatin analogues bearing a syn-(4aS,10bS)-phenanthridone ring junction. A one-pot tandem process involving a substrate-directed Overman rearrangement and ring closing metathesis reaction was developed for the stereoselective synthesis of a carbocyclic allylic trichloroacetamide. Conversion to a 6-bromopiperonyl amide, followed by a Heck reaction generated a homoallylic alcohol and completed the syn-(4aS,10bS)-phenanthridone carbon skeleton. Stereoselective epoxidation and dihydroxylation of the syn-(4aS,10bS)-phenanthridone framework was then investigated leading to the preparation of new analogues of 7-deoxypancratistatin.     

A stereoselective and short total synthesis of the polyhydroxylated gamma-amino acid (-)-detoxinine,based on stereoselective preparation of dihydropyrrole derivatives from lithiated alkoxyallenes

Based on our earlier results employing lithiated methoxyallene 2 as C(3) building block and imines 3 for the synthesis of dihydropyrrole derivatives 5, we have investigated chiral imines 6, 10, and 15 as electrophilic components. Combined with lithiated alkoxyallenes, these imines provide the corresponding primary adducts and finally the dihydropyrrole derivatives 8, 12, 17, 20, and 22 in good yields and with high to excellent syn selectivities. This stereochemical outcome is interpreted as a result of alpha-chelate control. Treatment with hydrochloric acid converted syn-8 and syn-12 into bicyclic compounds 9 and 13, whereas under more mildly acidic conditions adduct syn-17 was transformed into diol syn-18. The total synthesis of the uncommon gamma-amino acid (-)-detoxinine could be achieved by starting from (S)-malic acid, which was converted into imine 15 in four steps. Lithiated benzyloxyallene added to imine 15 and efficiently furnished the crucial dihydropyrrole derivative syn-22. The hydrogenolysis of this compound did not directly provide the protected triol 29 as anticipated, but a stepwise protocol made the triol available in a fairly satisfactory manner. A second crucial step of the synthesis was the selective oxidation of 29, which could be achieved by employing platinum dioxide and oxygen. The resulting bicyclic lactone 30 was smoothly transformed into enantiopure (-)-detoxinine. Thus, a fairly short synthesis of this natural product based on a lithiated alkoxyallene could be performed, demonstrating the potential of these intermediates for syntheses of interesting functionalized heterocyclic compounds.     

A chiron approach to aminocytitols by petasis-borono-mannich reaction: formal synthesis of (+)-conduramine e and (-)-conduramine e

A chiron approach to a stereoselective route for the synthesis of aminocytitols from carbohydrates is described. The formal synthesis of (+)-conduramine E and (-)-conduramine E was achieved by utilizing this strategy. The key features of the synthetic strategy include one-pot three-component Petasis-Borono-Mannich reaction to introduce the syn-β-amino alcohol functionality of conduramine E and ring-closing metathesis to construct its carbocyclic core. The present synthetic approach paves the way for stereoselective synthesis of several conduramines starting from carbohydrates.     

Preparation of interpenetrating polymer network composed of poly(ethylene glycol) and poly(acrylamide) hydrogels as a support of enzyme immobilization

Poly(ethylene glycol)(PEG)‐based interpenetrating polymeric network (IPN) hydrogels were prepared for the application of enzyme immobilization. Poly(acrylamide)(PAAm) was chosen as the other network of IPN hydrogel and different concentration of PAAm networks were incorporated inside the PEG hydrogel to improve the mechanical strength and provide functional groups that covalently bind the enzyme. Formation of IPN hydrogels was confirmed by observing the weight per cent gain of hydrogel after incorporation of PAAm network and by attenuated total reflectance/Fourier transform infrared (ATR/FTIR) analysis. Synthesis of IPN hydrogels with higher PAAm content produced more crosslinked hydrogels with lower water content (WC), smaller M_c and mesh size, which resulted in enhanced mechanical properties compared to the PEG hydrogel. The IPN hydrogels exhibited tensile strength between 0.2 and 1.2 MPa while retaining high levels of hydration (70–81% water). For enzyme immobilization, glucose oxidase (GOX) was immobilized to PEG and IPN hydrogel beads. Enzyme activity studies revealed that although all the hydrogels initially had similar enzymatic activity, enzyme‐immobilizing PEG hydrogels lost most of the enzymatic activity within 2 days due to enzyme leaching while IPN hydrogels maintained a maximum 80% of the initial enzymatic activity over a week due to the covalent linkage between the enzyme and amine groups of PAAm. Copyright © 2008 John Wiley & Sons, Ltd.     

Influence of poly (ethylene glycol) on the thermal, mechanical, morphological, physical-chemical and biodegradation properties of poly (3-hydroxybutyrate)

Blends of poly (3-hydroxybutyrate) (PHB) with poly (ethylene glycol) (PEG), (PHB/PEG), in different proportions of 100/0, 98/2, 95/5, 90/10, 80/20 and 60/40 wt%, respectively, were investigated for their thermal properties (using differential scanning calorimetry and thermogravimetric analysis), tensile properties, water vapor transmission rate, enzymatic biodegradation (using light microscopy) and mass retention. The addition of plasticizer did not alter the thermal stability of the blends, although an increase in the PEG content reduced the tensile strength and increased the elongation at break of pure PHB.     

Enantioselective Diels-Alder approach to C-3-oxygenated angucyclinones from (SS)-2-(p-tolysulfinyl)-1,4-naphthoquinone

Chiral racemic vinylcyclohexenes 2, bearing oxygenated substituents and/or a methyl group at the C-5 position of the cyclohexene ring, were submitted to Diels-Alder reactions with enantiomerically pure (SS)-(2-p-tolylsulfinyl)-1,4-naphthoquinone [(+)-1]. The domino cycloaddition/pyrolytic sulfoxide elimination process led to the formation of enantiomerically enriched angularly tetracyclic quinones anti-6 and syn-7, which were obtained from the kinetic resolution of the racemic diene. In all cases, (SS)-(2-p-tolylsulfinyl)-1,4-naphthoquinone reacted from the less hindered face of the more reactive s-cis conformation, to form products in good enantiomeric excesses. Steric effects and torsional interactions in the corresponding approaches account for the observed pi-facial diastereoselectivities at both partners. The usefulness of this methodology is illustrated with the four-step totally asymmetric synthesis of the C-3-oxygenated angucyclinone derivative (-)-8-deoxytetrangomycin 10 in 26% overall yield and with 50% enantiomeric purity.     

聚(二甲基丙烯酸多缩乙二醇酯—甲基丙烯酸锂)固体电解质研究

本文以聚乙二醇(PEG)为原料,在pEG端基引入双键,合成了PEG大分子单体。研究了PEG大分子单体—甲基丙烯酸锂(MALi)共聚及成膜反应,制备了单离子导电的共聚物薄膜,测定了其电性能,室温最高电导率可达10~(-6)Sem~(-1)以上,100℃时可达10~(-4)Scm~(-1),而且电导率—时间稳定性好。在力学性能方面,既柔韧且具有一定的强度,是作为固体电池电解质材料的理想材料。本文还研究了影响共聚物成膜性和电性能的因素,同时,采用DSC,X-射线衍射、IR等现代分析技术对聚合物主体材料及共聚物的结构和形态进行了研究。     

High-Fidelity End-Functionalization of Poly(ethylene glycol) Using Stable and Potent Carbamate Linkages

Commercial PEG-amine is of unreliable quality, and conventional PEG functionalization relies on esterification and etherification steps, suffering from incomplete conversion, harsh reaction conditions, and functional-group incompatibility. To solve these challenges, we propose an efficient strategy for PEG functionalization with carbamate linkages. By fine-tuning terminal amine basicity, stable and high-fidelity PEG-amine with carbamate linkage was obtained, as seen from the clean MALDI-TOF MS pattern. The carbamate strategy was further applied to the synthesis of high-fidelity multi-functionalized PEG with varying reactive groups. Compared to with an ester linkage, amphiphilic PEG-PS block copolymers bearing carbamate junction linkage exhibits preferential self-assembly tendency into vesicles. Moreover, nanoparticles of the latter demonstrate higher drug loading efficiency, encapsulation stability against enzymatic hydrolysis, and improved in vivo retention at the tumor region.     

High‐Fidelity End‐Functionalization of Poly(ethylene glycol) Using Stable and Potent Carbamate Linkages

Commercial PEG‐amine is of unreliable quality, and conventional PEG functionalization relies on esterification and etherification steps, suffering from incomplete conversion, harsh reaction conditions, and functional‐group incompatibility. To solve these challenges, we propose an efficient strategy for PEG functionalization with carbamate linkages. By fine‐tuning terminal amine basicity, stable and high‐fidelity PEG‐amine with carbamate linkage was obtained, as seen from the clean MALDI‐TOF MS pattern. The carbamate strategy was further applied to the synthesis of high‐fidelity multi‐functionalized PEG with varying reactive groups. Compared to with an ester linkage, amphiphilic PEG‐PS block copolymers bearing carbamate junction linkage exhibits preferential self‐assembly tendency into vesicles. Moreover, nanoparticles of the latter demonstrate higher drug loading efficiency, encapsulation stability against enzymatic hydrolysis, and improved in vivo retention at the tumor region.     

Synthesis and Enzymatic Degradation of Nylon 66 Copolymers with Poly(Ethyleneglycol)s

Abstract

Nylon 66 (N66) copolymers were prepared by melt polycondensation of adipic acid and hexamethylenediamine with 5–80 mol% poly(ethylene glycol) (PEG), where the molecular weight (MW) of PEG was 200–1000. The reduced specific viscosity of the copolymers was increased by the copolymerization. The crystallinity and melting temperature (T _m) of N66 components decreased with increasing PEG content, but T _m depression of copolymers at the same mole content decreased with increasing MW of PEG, suggesting that the copolymer structures are not of the random type but of the block type at the higher MW of PEG. The water absorption increased with increasing PEG content, and its increase was much higher at the higher MW of PEG. The enzymatic degradation was estimated by the weight loss of copolymer films in the buffer solution with and without a lipase at 37°C. The weight loss was enhanced appreciably by the presence of a lipase, and increased abruptly at higher PEG content, which was correlated to water absorption and the concentration of ester linkages. The enzymatic degradation of these N66 copolymers was much higher than that of previously reported PET copolymers with PEG. The abrupt increase of weight loss by alkali hydrolysis was fairly comparable to that of water absorption.     

Surface chemical studies on the competitive adsorption of poly(ethylene glycol) and ammonium poly(methacrylate) onto alumina

The adsorption of poly(ethylene glycol) (PEG) and ammonium poly(methacrylate) (APMA) onto alumina has been examined both individually and in combination. The adsorption density of APMA was found to be higher than that of PEG onto alumina. The adsorption isotherms of PEG and APMA for alumina exhibited a Langmuirian behavior. The adsorption density of PEG was significantly reduced in the presence of APMA, but the reverse was not true. About 60% desorption of PEG from alumina was achieved, while in the case of APMA the amount desorbed was only 10% in the pH range of 3-6. The zeta potential values of alumina were decreased and the isoelectric point (i.e.p.) values were shifted toward acidic pH values, proportional to the concentration of APMA added. However, such changes in the electrokinetic behavior were not observed by the addition of PEG. The dispersion behavior of alumina in the combined presence of PEG and APMA essentially followed the trends obtained for the alumina-APMA system, corroborating the electrokinetic measurements. Coprecipitation tests confirmed complexation between aluminum species and APMA in the bulk solution, but not with PEG. The interaction between alumina and PEG is primarily governed by hydrogen-bonding forces, while both hydrogen bonding and chemical interaction are involved in the case of the alumina-APMA system. FTIR spectroscopic studies provided evidence in support of the interaction mechanisms proposed.     

Well-defined Poly(lactic acid)s Containing Poly(ethylene glycol) Side-chains

Poly(ethylene glycol) (PEG) side-chain functionalized lactide analogues have been synthesized in four steps from commercially available L-lactide. The key step in the synthesis is the 1,3-dipolar cycloaddition between PEG-azides and a highly strained spirolactide-heptene monomer, which proceeds in high conversions. The PEG-grafted lactides analogues were polymerized via ring-opening polymerization using triazacyclodecene as organocatalyst to give well-defined tri- and hepta-(ethylene glycol)-poly(lactide)s (PLA) with molecular weights above 10 kDa and polydispersity indices between 1.6 and 2.1. PEG-poly(lactide) (PLA) with PEG chain M(n) 2000 was also prepared but GPC analysis showed a bimodal profile indicating the presence of starting macromonomer. Cell adhesion assays were performed using MC3T3 E-1 osteoblast-like cells demonstrating that PEG-containing PLA reduces cell adhesion significantly when compared to unfunctionalized PLA.     

Catalytic asymmetric assembly of stereodefined propionate units: an enantioselective total synthesis of (-)-pironetin

Double diastereoselection in alkaloid-catalyzed acyl halide-aldehyde cyclocondensation (AAC) reactions provides a strategy for realizing syn- or anti-selective propionate aldol additions from a common reaction manifold. Matched AAC homologation of enantioenriched aldehydes afford cis-disubstituted beta-lactones as surrogates for syn aldols; the mismatched AAC reactions provide anti-selective aldols in the form of trans-disubstituted 2-oxetanones. The utility of this reaction technology in synthesis activities is exemplified in a catalytic asymmetric total synthesis of (-)-pironetin.     

Use of poly(ethylene glycol) to control cell aggregation and fusion

Although poly(ethylene glycol) (PEG) has been widely used as an agent to induce cell aggregation and fusion, the physicochemical principles of its function are only becoming understood recently. PEG has an extremely high affinity for water. The PEG commonly used for these applications is in the molecular weight range of 8000 to 10 000. At low concentrations (0–15 wt.%), PEG in this molecular weight range tends to deplete from cell or lipid surfaces, creating an osmotic gradient which brings cells or lipid vesicles together. The depletion force is measured using a surface force apparatus. The corresponding reduction of surface viscosity is verified by shear viscosity measurements and by vesicle tumbling experiments. At higher concentrations (15–45 wt.%), the extremely high osmotic pressure generated by PEG compresses apposing surfaces of aggregated cells or vesicles to within limits where the membrane is no longer stable, and fusion occurs at point defects. A fusion lumen is formed with the help of cell swelling. If PEG is adsorbed or covalently link to the cell or vesicle surface, the surface force profile becomes entirely repulsive, and aggregation and fusion is inhibited. The repulsion is accountable by steric and electrostatic forces. Therefore, the fusogenic function of PEG can be explained quantitatively by colloidal stability theories.     

The synthesis and studies towards the self-replication of bis(capped porphyrins)

Connecting two facially-protected porphyrins was expected to lead to an equal mixture of laterally-bridged doubly-protected bis-porphyrins; one in which the two porphyrin units were protected on the same face (syn) and one with the two prophyrin units protected on opposite faces (anti). Addition of a co-factor (bidentate ligand) was expected to lead predominantly to the syn-bis-porphyrin by a templated self-replication process. This concept was explored using Baldwin's capped porphyrin. Bis(capped porphyrins) were synthesised in several steps starting from zinc(II) capped porphyrin 2. Nitration of 2 followed by reduction and photo-oxidation yields a mixture of zinc(II) porphyrindiones 7 and 8 that can separated by HPLC. The condensation of 2 molar eq. of zinc(II) porphyrin-7,8-dione 8 with 1,2,4,5-benzenetetramine leads to the formation of a 1:1 mixture of syn- and anti-dizinc(II) bis(7,8-capped porphyrins), 11 and 12, respectively, that have almost identical spectroscopic properties. These two geometric isomers were distinguished by significant differences in their molecular recognition properties. Likewise the syn- and anti-dizinc(II) bis(2,3-capped porphyrins), 9 and 10, respectively, are synthesised from the related zinc(II) capped porphyrin-2,3-dione 7, and were also identified using molecular recognition studies. The molecular recognition properties of these bis(capped porphyrins) were utilised in studies of self-replicating porphyrin systems. The results show that tetraazaanthraceno-bis-porphyrins 9-12 can catalyse their own formation but self-replication was not observed. These results highlight the potential that these interesting hosts have as templates in supramolecular chemistry, synthesis and catalysis.     

离子液体中β-葡萄糖苷酶生物催化合成红景天甙

比较了聚乙二醇修饰的β-葡萄糖苷酶在三种离子液体([bmim]PF6,[bmim]BF4,[bmim]Tf2N)及两种常用有机溶剂(1,4-二氧六环、正己烷)中的催化性能,确定了适宜的反应介质;考察了底物浓度、温度、体系含水量和反应时间等因素对β-葡萄糖苷酶催化合成红景天甙反应的影响.结果表明,在最佳反应介质[bmim...     

Asymmetric nitroaldol reaction. Synthesis of taxotere side chain and (-)-bestatin using (1R)-8-phenylmenthyl glyoxylate

The nitroaldol reaction of (1R)-8-phenylmenthyl glyoxylate (3b) with 1-nitro-1-phenylmethane (4) or with 1-nitro-2-phenylethane (13) led stereoselectively to adducts syn-2b and syn-12b, which were then transformed into the Taxotere side chain and (-)-bestatin hydrochloride in overall yields of 52% and 31%, respectively.     

New approach on the development of plasticized polylactide (PLA): Grafting of poly(ethylene glycol) (PEG) via reactive extrusion

In this work, new ways of plasticizing polylactide (PLA) with low molecular poly(ethylene glycol) (PEG) were developed to improve the ductility of PLA while maintaining the plasticizer content at maximum 20 wt.% PLA. To this end, a reactive blending of anhydride-grafted PLA (MAG-PLA) copolymer with PEG, with chains terminated with hydroxyl groups, was performed. During the melt-processing, a fraction of PEG was grafted into the anhydride-functionalized PLA chains. The role of the grafted fraction was to improve the compatibility between PLA and PEG. Reactive extrusion and melt-blending of neat and modified PLA with PEG did not induce any dramatic drop of PLA molecular weight. The in situ reactive grafting of PEG into the modified PLA in PLA/PEG blends showed a clear effect on the thermal properties of PLA. It was demonstrated by DSC that the mobility gained by PLA chains in the plasticized blends yielded crystallization. The grafting of a fraction of PEG into PLA did not affect this process. However, DSC results obtained after the second heating showed an interesting effect on the T_g when 20 wt.% PEG were melt blended with neat PLA or 10 wt.% MAG-PLA. In the latter case, the T_g displayed by the reactive blend was shifted to even lower temperatures at around 14 °C, while the T_g of neat PLA and PLA blended with 20 wt.% PEG was around 60 and 23 °C, respectively. Regarding viscoelastic and viscoplastic properties, the presence of MAG-PLA does not significantly influence the behavior of plasticized PLA. Indeed, with or without MAG-PLA, elastic modulus and yield stress decrease, while ultimate strain increases with the addition of PEG into PLA.