Self-sorting in rodlike micelles of chiral bisurea bolaamphiphiles

We have demonstrated the formation of segregated enantiomeric dynamic rods in water, from the self-sorting of chiral trans-1,2-bisureido cyclohexane-based bolaamphiphiles. Fluorescence probes have been used to investigate the self-sorting through forming exciplex and FRET.     

Investigations on a detergent system with rodlike micelles

Conductivity, kinetic, static and dynamic light scattering, electric birefringence and rheological measurements were carried out on aqueous solutions of Tetradecylpyridinium-n-Heptanesulfonate (C₁₄PyC₇SO₃) up to high concentrations. In dilute solutions between the critical micelle concentration (cmc) and another characteristic concentration (c _t) spherical micelles were detected whose radii were independent of detergent concentration and equal to the length of a detergent molecule; the aggregation numbern of these micelles of about 100 monomers per micelle was also in agreement with the existence of normal spherical micelles of aC ₁₄-detergent.Above the concentrationc _t, the spherical micelles were found to grow to rodlike aggregates whose short axis was still independent of concentration and equal to the length of a monomer, while the lengthsL of the rods increased with increasing detergent concentration. When the lengthsL of the rods became comparable with the mean distancea between them, the starting interaction between the rods slowed down their growth. In this concentration range of overlapping rods, the data could be evaluated with a recently developed theory by Doi and Edwards for stiff rods. The rods reached finally a maximum length of about 500 å and decreased again in size upon further increase of concentration when the overlap ratioL/a reached a value of about 1,5.     

Hollow nanoparticles prepared from pH‐responsive template polymer micelles

Water‐soluble crosslinked hollow nanoparticles were prepared using pH‐responsive anionic polymer micelles as templates. The template micelles were formed from pH‐responsive diblock copolymers (PAMPS‐PAaH) composed of the poly(sodium 2‐(acrylamido)‐2‐methylpropanesulfonate) and poly(6‐(acrylamido)hexanoic acid) blocks in an aqueous acidic solution. The PAMPS and PAaH blocks form a hydrophilic anionic shell and hydrophobic core of the core‐shell polymer micelle, respectively. A cationic diblock copolymer (PEG‐P(APTAC/CEA)) with the poly(ethylene glycol) block and random copolymer block composed of poly((3‐acrylamidopropyl)trimethylammonium chloride) containing a small amount of the 2‐(cinnamoyl)ethylacrylate photo‐crosslinkable unit can be adsorbed to the anionic shell of the template micelle due to electrostatic interaction, which form a core‐shell‐corona three‐layered micelle. The shell of the core‐shell‐corona micelle is formed from a polyion complex with anionic PAMPS and cationic P(APTAC/CEA) chains. The P(APTAC/CEA) chains in the shell of the core‐shell‐corona micelle can be photo‐crosslinked with UV irradiation. The template micelle can be dissociated using NaOH, because the PAaH blocks are ionized. Furthermore, electrostatic interactions between PAMPS and PAPTAC in the shell are screened by adding excess NaCl in water. The template micelles can be completely removed by dialysis against water containing NaOH and NaCl to prepare the crosslinked hollow nanoparticles. Transmission electron microscopy observations confirmed the hollow structure. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

The adsorption of polymerized rodlike micelles at the solid-liquid interface

Solutions of rodlike polymeric micellar aggregates, formed from the polymerization of cetyltrimethyl-ammonium 4-vinylbenzoate (CTVB), adsorb at the solid-liquid interface. The poly-CTVB aggregates are imaged in situ using soft contact atomic force microscopy. The aggregates form self-organized two-dimensional films that show a high degree of order on nanometer to micrometer length scales. Unlike their simple surfactant analogues, the adsorbed layer structures are permanently adsorbed and the structure is resilient to washing with pure solvent. In the case of poly-CTVB, the adsorbed aggregates appear to be rigid cylindrical structures of between 30 and 60 nm in length. At the interface, the center to center spacing of the aligned aggregates is 8+/-1 nm. Images of a second series ofpolymerized aggregates formed by the copolymerization of CTVB with sodium vinyltosylate revealed a change in the aggregate structure to a set of linked spherical aggregates. These polymerized aggregates also spontaneously form a permanent adsorbed layer at the solid-liquid interface.     

Effects of organic solvents on the scission energy of rodlike micelles

The linear viscoelastic response of erucyl bis(hydroxyethyl) methylammonium chloride with added KCl has been studied as a function of temperature and nonpolar solvent addition. The plateau modulus is independent of temperature from 25 to 40 degrees C, in contrast to previous studies with salicylate counterions that showed a plateau modulus increasing with temperature over this range. The average micelle length, L, predicted by the model of Cates, depends experimentally on Escis/kBT, where Escis is the scission energy of the chain and kBT is the Boltzmann constant times the absolute temperature. With ethanol addition, the calculated average contour length, L, decreases by a factor of 4 as ethanol concentration varies from 0 to 1.3 M. This corresponds to an apparent energy for scission, Escis, decrease from 81 +/- 8 to 74 +/- 7 kJ/mol. On the other hand, only 80 mM of hexane is required to cause a decrease in Escis to the same level, and for hexane addition levels above 70 mM a disruption in the plateau modulus indicates the disruption of the rodlike structure. The correspondence between the effect of temperature and the effect of solvent addition allows the development of "solvent/temperature" superposition rules to predict the rheology of these viscoelastic fluids at elevated temperatures.     

The influence of solubilized additives on surfactant solutions with rodlike micelles

Static and dynamic light scattering, electric and flow birefringence, kinetic and rheological measurements were carried out on solutions of alkylpyridinium and alkyltrimethylannoniumsalicylates with various additives. The additives were: the aliphatic n-alcohols from ethanol to octanol, decane, toluene and cyclohexane. The pure surfactants in aqueous solutions form rodlike micelles already at low concentrations and have only a small concentration range above the cmc in which spherical micenes exist. The rods were characterized by the experiments; they increase in length with increasing concentration until their rotational volumes start to overlap at a characteristic concentration C1. Above C1, the lengths decrease again on further increase of the concentration.     

Polymerized rodlike nanoparticles with controlled surface charge density

Stable rodlike nanoparticles with highly controlled surface charge density have been developed by the free radical polymerization of the mixture of polymerizable cationic surfactant, cetyltrimethylammonium 4-vinylbenzoate (CTVB), and hydrotropic salt sodium 4-styrenesulfonate (NaSS) in aqueous solution. The surface charge of the polymerized CTVB/NaSS rodlike nanoparticles was controlled by varying the NaSS concentration during the polymerization process, and the charge variation was interpreted in terms of the overcharging effect in colloidal systems. The SANS measurements show that the diameter of the polymerized CTVB/NaSS rodlike nanoparticles is constant at 4 nm and the particle length ranges from 24 to 85 nm, depending on the NaSS concentration. The polymerized particles are longest when the NaSS concentration is 5 mol % which corresponds to the charge inversion or neutral point. The SANS and zeta potential measurements show that the Coulomb interactions between the particles are strongly dependent on the NaSS concentration and the zeta potential of the polymerized CTVB/NaSS nanoparticles changes from positive to negative (+12.8 approximately -44.2 mV) as the concentration of NaSS increases from 0 to 40 mol %. As the NaSS concentration is further increased, the zeta potential is saturated at approximately -50 mV.     

Polyaniline/iron nanocomposites prepared by cryomilling

The polyaniline/iron nanocomposites with both conducting and magnetic properties have been prepared by cryomilling (high‐energy ball milling under cryogenic temperature), in which the average size of iron grains attains 20 nm. Enhanced coercivity of 206 Oe and decreased conductivity of 0.1 S cm^?1 at room temperature have been obtained for the nanocomposites containing 10% volume fraction of iron in polyaniline after cryomilling for 20 h. The high value of the coercivity could be considered due to the presence of a fraction of single‐domain particles in the nanocomposites. The low value of the conductivity could be considered due to the dedoping of conducting polyaniline with the cryomilling time. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3157–3164, 2006     

Inorganic nanoparticles prepared in miniemulsion

The defined synthesis of inorganic nanoparticles is the crucial step for their successful application. Thus, preparation methods to control composition, shape, size, and aggregation behavior are of high interest and relevance. Here, the possibilities that the miniemulsion technique offers for the generation of inorganic nanoparticles are reviewed. Several of the traditional synthetic methods as the controlled precipitation or sol–gel chemistry were confined to the droplets of a miniemulsion, leading to new structures and morphologies. Furthermore, the focus is put on polymer- and latex-assisted mineralization and a miniemulsion-based approach to nonconventional colloidal lithography.     

DNA-polymer micelles as nanoparticles with recognition ability

The Watson-Crick binding of DNA single strands is a powerful tool for the assembly of nanostructures. Our objective is to develop polymer nanoparticles equipped with DNA strands for surface-patterning applications, taking advantage of the DNA technology, in particular, recognition and reversibility. A hybrid DNA copolymer is synthesized through the conjugation of a ssDNA (22-mer) with a poly(ethylene oxide)-poly(caprolactone) diblock copolymer (PEO-b-PCl). It is shown that, in water, the PEO-b-PCl-ssDNA(22) polymer forms micelles with a PCl hydrophobic core and a hydrophilic corona made of PEO and DNA. The micelles are thoroughly characterized using electron microscopy (TEM and cryoTEM) and small-angle neutron scattering. The binding of these DNA micelles to a surface through DNA recognition is monitored using a quartz crystal microbalance and imaged by atomic force microscopy. The micelles can be released from the surface by a competitive displacement event.     

Disk micelles from amphiphilic Janus gold nanoparticles

Janus gold nanoparticles are synthesised via a simple preparation method and behave as amphiphiles self-assembling in water into disk-shaped micelles.     

Thin liquid films containing micelles or nanoparticles

The stratification/microstructure formation inside suspended thin liquid films containing micelles or other nanoparticles is reviewed with the aim of clarifying some key issues and suggesting unresolved questions requiring further investigation. New experiments reveal that the micellar layer thinning phenomenon is a reversible process in films formed from non-ionic micellar solutions. The important factors contributing to the correlation between the ordered microstructure formation that leads to a high structural stabilization force in a single free suspended film and the stability of macrodispersions (such as foams and emulsions and particle suspensions) are also discussed.     

Phase behavior of monoglycerol fatty acid esters in nonpolar oils: reverse rodlike micelles at elevated temperatures

We have studied nonaqueous phase behavior and self-assemblies of monoglycerol fatty acid esters having different alkyl chain lengths in different nonpolar oils, namely, liquid paraffin (LP 70), squalane, and squalene. At lower temperatures, oil and solid surfactants do not mix at all compositions of mixing. Upon an increase in the temperature of the surfactant system, the solid melts to give isotropic single or two-liquid phases, depending on the nature of the oil and the surfactant. All monolaurin/oil systems form an isotropic single-phase liquid, but with a decreasing alkyl chain length of surfactant, they become less lipophilic and immiscible in oils. As a result, a two-phase domain is observed in the oil rich region of all monocaprylin/oil systems over a wide range of concentrations. Judging from the phase diagrams, the surfactants are the least miscible with squalane, and the order of miscibility tendency is squalene > LP 70 > squalane. With a further increase of temperature, the solubility of the surfactant in the oil increases, and the two-liquid phase transforms to an isotropic single phase. This phase transformation corresponds to the reverse of the cloud-point phenomenon observed in aqueous nonionic surfactant systems. Small-angle X-ray scattering (SAXS) measurements show the presence of reversed rodlike micelles in the isotropic single phase, and the length of the aggregates decreases with increasing temperature and increasing alkyl chain length of the surfactant. These results indicate a rod-sphere transformation with increasing lipophilicity of the surfactant and confirms the validity of Ninham's penetration model in the reversed system. An addition of a small amount of water dramatically enhances the elongation of the reverse micelles. Increasing the surfactant concentration or changing the oil from squalene to LP 70 also increases the length of the rodlike aggregates.     

Polyether nanoparticles from covalently crosslinked copolymer micelles

Double hydrophilic block copolymers poly(ethylene oxide)-b-polyglycidol were synthesized using living anionic polymerization. The polyglycidol blocks were made hydrophobic by the esterification of a part of hydroxyl groups with cinnamic acid, thus simultaneously attaching UV-sensitive double bonds to the polymer backbone. The block copolymers were found to spontaneously associate in aqueous solution forming well-defined micelles, where the corona of the micelles was formed of EO units and the cores consisted of hydrophobic glycidyl cinnanamate units. The critical micelle concentration was determined by light-scattering measurements and fluorescence spectroscopy. Stabilization of micelles was obtained by covalently crosslinking the cores of polyether micelles formed from amphiphilic block copolymers of the type poly(ethylene oxide)-b-poly(glycidol-co-glycidyl cinnamate) (denoted EO(113)-b-(Gl(33)-co-GlCA(33-x))). To obtain stable nanoparticles double bonds of cinnamate units contained in core were crosslinked under UV irradiation. The kinetics of the stabilization process was investigated using SEC-MALLS and UV spectroscopy. The parameters of the micelles and nanogels were calculated from the light-scattering data.     

Tuning the properties of CdSe nanoparticles in reverse micelles

A new and simple approach of synthesizing size-quantized CdSe colloids in reverse micellar suspension is described. The room temperature reaction between Cd²⁺ and selenosulfate is carried out within the water pool of di-octyl sulphosuccinate (Aerosol-OT) reverse micelles. The size dependent absorption and emission properties of these small CdSe particles (3—5 nm) are described. The Q-sized CdSe nanoparticles exhibit an emission yield of 0.13. Up to a factor of two enhancement in the emission efficiency can be achieved following the surface functionalization of CdSe colloids with triethyl amine.     

Preparation of cadmium sulfide nanoparticles in self-reproducing reversed micelles

Octyl octanoate (O-OL) underwent hydrolysis in sodium octanoate (NaOA) reversed micelles in 85:15 = isooctane:octanol (OL) (v/v), containing w = [H2O]/[NaOA] = 40. The products of the hydrolysis, octanoic acid (OA) and octanol (OL), lead to the formation of additional (albeit smaller) reversed micelles; hence the process is considered to be self-reproducing. Self-reproduction was found to be catalyzed by lithium hydroxide, solubilized in the water pools, as well as by hydrogen sulfide, added to the solution of the reversed micelles. Addition of hydrogen sulfide to cadmium perchlorate containing self-reproducing reversed micelles resulted in the formation of cadmium sulfide (CdS) nanoparticles. Diameters of the CdS containing nanoparticles could be altered from 5.4 to 1.8 nm by changing the [Cd2+]/[H2S] ratios from 0.25 to 10. The CdS nanoparticles formed were capped by mercaptopropionic acid, isolated as solids, and could be repeatedly redispersed in water without changing their sizes. Additional CdS nanoparticles were generated in the supernatants removed from the precipitated capped CdS nanoparticles.