Catalytic, asymmetric aza-Baylis-Hillman reaction of N-sulfonated imines with activated olefins by quinidine-derived chiral amines

The chiral nitrogen Lewis base, tricyclic cinchona alkaloid derivative TQO, is an effective promoter in the catalytic, asymmetric aza‐Baylis–Hillman reaction of N‐sulfonated imines Ar? CH?NR′ 1 (R′ = Ts, Ms, Ns, SES) with various activated olefins such as methyl vinyl ketone (MVK), ethyl vinyl ketone (EVK), acrolein, methyl acrylate, phenyl acrylate, or α‐naphthyl acrylate to give the corresponding adducts in moderate to good yields with good to high ee (up to 99 %) at ?30 °C or 45 °C in various solvents, including DMF/MeCN (1:1, v/v). The first such reaction of 1 with the simplest Michael acceptor MVK and methyl acrylate has been achieved with excellent enantioselectivity. The adducts derived from MVK and EVK had the opposite absolute configuration to those from acrolein, methyl acrylate, phenyl acrylate, and α‐naphthyl acrylate. A plausible mechanism has been proposed on the basis of previous reports and the authors’ investigations. An effective bifunctional chiral nitrogen Lewis base–Brønsted acid system has been revealed in this type of aza‐Baylis–Hillman reaction.     

Multifunktionellebis-(trifluormethyl)-substituierte Synthesezwischenstufen aus 4,4-Bis-(trifluormethyl)-1-oxa-3-azabuta-1,3-dienen viaBaylis-Hillman Reaktion

Summary TheBaylis-Hillman reaction of 4,4-bis-(trifluoromethyl)-1-oxa-3-azabuta-1,3-dienes with acrolein, methyl vinyl ketone, ethyl vinyl ketone, acrylonitrile, ethyl acrylate, andn-butyl acrylate provides useful multifunctional partial fluorinated building blocks in one step.

Prof. Dr. Rolf Huisgen zum 75. Geburtstag gewidmet     

Highly stereospecific palladium-catalysed vinylation of vinylic halides under solid-liquid phase transfer conditions.

(E,E) and (E,Z) conjugated dienoates, dienones and dienals are obtained with high stereospecificity (?95%) and in high yields from the corresponding (E) and (Z) vinylic halides and vinylic substrates (methyl acrylate, methyl vinyl ketone or acrolein), in the presence of potassium carbonate, tetrabutylammonium chloride and a catalytic amount of palladium acetate, in N,N-dimethylformamide at room temperature.     

Dinitramide and its salts

Dinitramide readily adds to acrolein, methyl vinyl ketone, and phenyl vinyl ketone, but not to acrylonitrile or methyl acrylate. Treatment of dinitro compounds (O₂N)₂NCH₂CH₂COR (R = H, Me, Ph, OMe) with bases results in dinitramide salts in 66–83 % yields.For part 1, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1264–1266, July, 1994.     

Free radical polymerization with catalytic chain transfer: Using NMR to probe the strength of the cobalt–carbon bond in small molecule model reactions

This work examines cobalt–carbon bond formation between the cobalt (II) macrocycle, (tetrakis(p‐methoxyphenyl)porphyrinato)cobalt (II), (TAP)Co, and a variety of radicals derived from vinyl compounds to facilitate a better understanding of the various factors affecting the cobalt–carbon bond strength in catalytic chain transfer polymerization. The reaction of (TAP)Co with the following vinylic molecules was studied: methacrylonitrile, cyclohexene, methyl methacrylate, styrene, methyl acrylate, vinyl acetate, vinyl benzoate, methyl crotonate, cis‐2‐pentenenitrile, and ethyl α‐hydroxymethacrylate. Different concentrations of each vinylic compound were added to (TAP)Co and 2,2′‐azobis(isobutyronitrile) in CDCl₃ at 60 °C. The ratio of Co(III) to Co(II) and the nature of the radical bound to the cobalt macrocycle were determined via nuclear magnetic resonance measurements. Several factors are shown to affect the reaction of the radical and the cobalt (II) species (and hence the strength of the cobalt–carbon bond in the resulting compound). These factors are as follows: the number of pathways by which a radical may be derived from the vinyl compound; the variety of radicals that can be produced from the vinylic molecule; the stability of the radical(s) generated; and the relative propagation rate of the vinyl compound. A discussion on the relevance of this study to the behavior of different monomers in catalytic chain transfer reactions is included. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6171–6189, 2006     

Michael additions to acrylonitrile,methyl acrylate and methyl vinyl ketone to Nb-benzylidenetryptophan methyl ester

Michael addition to methyl acrylate and methyl vinyl ketone of N_b-benzylidene-L-tryptophan methyl ester 1 gave 2-(3-indolylmethyl)glutamic dimethyl ester 2a and α-(3-oxobutyl)tryptophan methyl ester 2b respectively. Addition to acrylonitrile of 1 yielded α,N_a-dicyanoethyltryptophan methyl ester 3 .     

Captodative olefins in normal and inverse Diels-Alder Reactions

Olefins with captodative substitution are reactive dienophiles in Diels-Alder reactions with normal and inverse electron demand. This is shown for reactions of 2-(tert-butylthio)acrylonitrile ( 1 ) with various dienes and heterodienes, e.g. 1,3-cyclohexadiene, hexachloro-1, 3-cyclopentadiene, acrolein, methacrolein, and methyl vinyl ketone (Schemes 2 and 3). In case of the hetrodienes, 3,4-dihydro-2H-pyrans are formed beside small amounts of tetrahydrothiophenes; however, with methyl vinyl ketone, both reaction pathways are equally followed. The high reactivity of captodative olefins in Diels-Alder reactions are rationalized on the basis of Sustmann's FMO model under consideration of Viehe's concept of captodative substitution of alkenes.     

Measurements of the kinetics of the OH‐initiated oxidation of methyl vinyl ketone and methacrolein

The mechanisms of the OH‐initiated oxidation of methyl vinyl ketone and methacrolein have been studied at 300 K and 100 Torr total pressure, using a turbulent flow technique coupled with laser‐induced fluorescence detection of the OH radical. The rate constants for the OH + methyl vinyl ketone and OH + methacrolein reactions were measured to be (1.78 ± 0.08) × 10^?11 and (3.22 ± 0.10) × 10^?11 cm³ molecule^?1 s^?1, respectively, and were found to be in excellent agreement with previous studies. In the presence of O₂ and NO, the OH radical propagation and the loss of OH through radical termination resulting from the production of methyl vinyl ketone‐ and methacrolein‐based alkyl nitrates were measured at 100 Torr total pressure and compared to the simulations of the kinetics of these reaction systems. The results of these experiments are consistent with an overall rate constant of (2.0 ± 1.3) × 10^?11 cm³ molecule^?1 s^?1 for both the methyl vinyl ketone‐based peroxy radical + NO and methacrolein‐based peroxy radical + NO reactions, each with branching ratios of 0.90 ± 0.10 for the bimolecular channel (oxidation of NO to NO₂) and 0.10 ± 0.10 for the termolecular channel (production of methyl vinyl ketone‐ and methacrolein‐based alkyl nitrates). © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 12–25, 2003     

A product study of the gas-phase reaction of Isoprene with the OH radical in the presence of NOx

The gas-phase reaction of isoprene with the OH radical, in the resence of NO_x, was investigated at 298 ± 2 K and atmospheric pressure of air by long path length FT-IR spectroscopy. The primary products identified and their formation yields were: methacrolein, 0.21 ± 0.05; methyl vinyl ketone, 0.29 ± 0.07; and HCHO, with the observed yield being consistent with the sum of the methacrolein and methyl vinyl ketone yields. Combined with the previously reported yield of 0.044 ± 0.006 for 3-methylfuran, these products accounted for 55 ± 9% of the isoprene which reacted. Under conditions where the dark reaction of isoprene with NO₂is not significant, the balance of the isoprene consumed could possibly be accounted for by the “organic nitrates” and “other carbonyl compounds” formed in estimated overall yields of ca. 12% and ca. 25%, respectively.     

Polymerization of vinyl monomers with salts of bronsted acids

The polymerization of vinyl monomers (N-phenylmaleimide, acrylamide, acrylonitrile, methyl vinyl ketone, methyl methacrylate, vinyl chloride, and styrene) with sodium salts of Brønsted acids (sodium cyanide, sodium nitrite, sodium hydroxide, etc.) were investigated at 0°C in dimethylformamide. N-Phenylmaleimide, acrylonitrile, and methyl vinyl ketone were found to undergo polymerization with sodium cyanide, however the other monomers were not polymerized with this salt. In the polymerizations of acrylonitrile and N-phenylmaleimide with sodium cyanide, the rates of the polymerizations were found to be proportinal to the initiator concentration and to the square of the monomer concentration. The activation energy of acrylonitrile polymerization was 3.7 kcal/mole, and that of N-phenylmaleimide ws 3.0 kcal/mole. The results of the copolymerization of acrylonitrile with methyl methacrylate at 0°C in dimethyl-formamide with sodium cyanide confirm that these polymerizations proceeded by an anionic mechanism initiated by the Michael addition reaction of the monomers with the salts. In these polymerizations, the monomer reactivity increased with increase in the e values. The initiation ability of sodium salts increased with increasing pK_a of the conjugate acids and with decreasing electronegativity of metal ion in the series of lithium, sodium, and potassium cyanide. The polymerizations took place only in aprotic polar solvents, and did not occur in weak polar solvents and in protonic solvents.     

Iron powder and tin/tin chloride as new reducing agents of Meerwein arylation reaction with unexpected recycling to anilines

Abstract

Simple and rapid route for Meerwein arylation reaction using iron powder or a mixture of tin/tin chloride has been developed. In the presence of iron powder, different aryl diazonium salts reacted with methyl vinyl ketone, acrylates, and isopropenyl acetate. Production of oximes was detected as the main product with acrylates or in a mixture with β-aryl methyl ketones in the case of methyl vinyl ketone. The in situ produced HNO₂ from an excess of NaNO₂/HCl was trapped by alkyl aryl radical to form oximes in the E configuration form. The presence of tin/tin chloride mixture in the reaction of the aryl diazonium salts with methyl vinyl ketone produced Michael products along with β-aryl methyl ketones. The predicted α-aryl methyl ketones from the reaction of isopropenyl acetate with the diazotized anilines were obtained using iron or tin/tin chloride mixture.     

Modification of Vinylformamide by Michael Addition to Methyl Acrylate and Methyl Vinyl Ketone,and Copolymers Derived from the Resulting Products

Vinylformamide reacts with methyl acrylate and methyl vinyl ketone under conditions of base catalysis, following the Michael addition pattern, to give methyl 3-(vinylformylamino)propionate and previously unknown 4-(vinylformylamino)-2-butanone. Radical copolymerization of these compounds with vinylformamide and N-vinylpyrrolidone was studied.     

Combined Experimental and Computational Investigations of Rhodium‐Catalysed CH Functionalisation of Pyrazoles with Alkenes

Detailed experimental and computational studies have been carried out on the oxidative coupling of the alkenes C₂H₃Y (Y=CO₂Me ( a ), Ph ( b ), C(O)Me ( c )) with 3‐aryl‐5‐R‐pyrazoles (R=Me ( 1 a ), Ph ( 1 b ), CF₃ ( 1 c )) using a [Rh(MeCN)₃Cp*][PF₆]₂/Cu(OAc)₂ ? H₂O catalyst system. In the reaction of methyl acrylate with 1 a , up to five products ( 2 aa – 6 aa ) were formed, including the trans monovinyl product, either complexed within a novel Cu^I dimer ( 2 aa ) or as the free species ( 3 aa ), and a divinyl species ( 6 aa ); both 3 aa and 6 aa underwent cyclisation by an aza‐Michael reaction to give fused heterocycles 4 aa and 5 aa , respectively. With styrene, only trans mono‐ and divinylation products were observed, whereas with methyl vinyl ketone, a stronger Michael acceptor, only cyclised oxidative coupling products were formed. Density functional theory calculations were performed to characterise the different migratory insertion and β‐H transfer steps implicated in the reactions of 1 a with methyl acrylate and styrene. The calculations showed a clear kinetic preference for 2,1‐insertion and the formation of trans vinyl products, consistent with the experimental results.     

Synthesis of optically active 5,6,7,8-tetrahydroquinolines

(+)-(R)-5-Methyl- and (+)-(R)-2,5-dimethyl-8-isopropylidene-5,6-dihydro-7H-quinoline, 7 and 11 , were synthesized by reaction of (R)-pulegon morpholino-enamine with acrolein or methyl vinyl ketone. The Michael adducts thus formed were reacted with hydroxylammonium hydrochloride in polar media. Compound 7 was also obtained by thermal rearrangement of the O-allyl ether of pulegone oxime. The selectivity of both synthetic methods were rather poor (30–49%). Isolation of 7 and 11 in the pure state was accomplished by preparative glc.     

Product formation from the reaction of the NO3 radical with isoprene and rate constants for the reactions of methacrolein and methyl vinyl ketone with the NO3 radical

Using a relative rate method, rate constants for the gas-phase reactions of the NO₃ radical with methacrolein and methyl vinyl ketone were determined to be (4.4 ± 1.7) × 10⁻¹⁵ cm³ molecule⁻¹ s⁻¹ and <6 × 10⁻¹⁶ cm³ molecule⁻¹ s⁻¹, respectively, at 296 ± 2 K. The molar formation yields of methacrolein and methyl vinyl ketone from the gas-phase reaction of the NO₃ radical with isoprene at 296 ± 2 K and atmospheric pressure of air were measured to be 0.035 ± 0.014 each. The tropospheric implications of these kinetic and product data are discussed, and it is concluded that the nighttime NO₃ radical reactions with methacrolein and methyl vinyl ketone are not important. However, during nighttime the formation of methacrolein and methyl vinyl ketone from the reaction of isoprene with the NO₃ radical may dominate over their formation from the O₃ reaction with isoprene. Atmospheric pressure ionization tandem mass spectrometry (API-MS/MS) was used to investigate the products of the reactions of the NO₃ radical with isoprene and isoprene-d₈, and C₅-nitrooxycarbonyl(s) (e.g., O₂NOCH₂C(CH₃) (DOUBLEBOND) CHCHO), C₅-hydroxynitrate(s) (e.g., O₂NOCH₂C(CH₃)(DOUBLEBOND) CHCH₂OH), C₅-nitrooxyhydroperoxide(s) (e.g., O₂NOCH₂C(CH₃)(DOUBLEBOND) CHCH₂OOH), and C₅-hydroxycarbonyl(s) (e.g., HOCH₂CH(DOUBLEBOND) C(CH₃)CHO) and their deuterated analogs were observed from these reactions. © 1996 John Wiley & Sons, Inc.     

Theoretical study of the Michael addition of acetylacetone to methyl vinyl ketone catalyzed by the ionic liquid 1‐butyl‐3‐methylimidazolium hydroxide

By performing density functional theory calculations, we have investigated the Michael addition of acetylacetone to methyl vinyl ketone in the absence and presence of the ionic liquid 1‐butyl‐3‐methylimidazolium hydroxide ([bmIm]OH). In the absence of ionic liquids, acetylacetone is firstly tautomerized to enol form and then takes place Michael addition to methyl vinyl ketone. As in the catalyzed Michael addition reaction, a bmIm⁺‐OH^? ion pair is introduced into the reaction system to model the effect of the ionic liquid environment on the reactivity. The calculated results show that the anion enhances nucleophilic ability of acetylacetone since the OH^? anion captures a proton to form an acetylacetone anion‐H₂O complex, and the cation improves the electrophilic ability of methyl vinyl ketone by forming intermolecular hydrogen‐bonds. Both the remarkable effects of the cation and anion on the reactivity of reactants promote this reaction, which take place more easily compared with uncatalyzed reaction. The calculated results show that the main product of the Michael addition is in its ketone form. Our study provides a detailed reaction mechanism of Michael addition catalyzed by basic ionic liquid [bmIm]OH and clearly reveal the catalytic role of ionic liquid in important chemical reaction. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Alternating copolymerization of methyl acrylate with donor monomers having a protected amine group

Attempts were made to copolymerize p-aminostyrene, p-acetamidostyrene, N-methyl-p-aceta-midostyrene, N-(4-vinylphenyl) phthalimide, N-vinyl succinimide, and N-vinyl phthalimide with methyl acrylate complexed with ethyl aluminum sesquichloride. Only reactions involving N-(4-vinylphenyl)phthalimide and N-vinyl phthalimide yielded alternating copolymers. N-vinyl succinimide gave nonalternating copolymers insoluble in common solvents and the other monomers did not copolymerize. In some cases, the conventional radical copolymers were prepared for comparison purposes. The reactivity ratios of the free-radical initiated copolymerization of methyl acrylate (I) with N-(4-vinylphenyl)phthalimide (II) were r₁ = 0.14 and r₂ 1.56. The alternating copolymers were studied by ¹H-NMR and ¹³C-NMR spectroscopy. The alternating copolymer of N-(4-vinylphenyl)phthalimide with methyl acrylate was hydrazinolyzed to form the alternating copolymer of methyl acrylate with p-aminostyrene. Hydrazinolysis of the alternating copolymer of methyl acrylate with N-vinyl phthalimide removed the phthalimide moiety and generated vinyl amine units which readily cyclized with neighboring methyl acrylate units to form copolymers that contained five-membered lactam rings. The infrared (IR) spectra of the hydrazinolyzed products contain bands due to amine or amide groups and are devoid of the characteristic bands of the phthalimide ring.     

Synthesis and photopolymerization of novel multifunctional vinyl esters

Novel mono‐ and multifunctional vinyl ester monomers containing thioether groups were synthesized via an amine‐catalyzed Michael addition reaction between vinyl acrylate and multifunctional thiols. Using photo‐differential scanning calorimetry and real‐time Fourier transform infrared (RTIR) spectroscopy, the polymerization kinetics and oxygen inhibition of the homopolymerizations of the vinyl ester monomers were investigated. The effect of the vinyl ester and thioether group on acrylate/vinyl ester and thiol/vinyl ester copolymerizations was determined using real‐time IR spectroscopy to monitor polymerization rates of acrylate, vinyl, and thiol groups simultaneously. Polymerization of the vinyl esters used was found to be relatively insensitive to oxygen inhibition. We propose that the thioether group is responsible for reducing oxygen inhibition by a series of chain transfer/oxygen‐scavenging reactions. In polymerization of a acrylate/vinyl ester mixture both in nitrogen and in air, the vinyl ester monomer significantly enhances the polymerization rates and the conversion of the acrylate double bonds via plasticization of the crosslinked matrix and reduction of inhibition by oxygen. Ultimately, the vinyl ester monomer is incorporated into the polymer network. Thiol/vinyl ester free‐radical copolymerization is much faster than either thiol/allylether copolymerization or vinyl ester homopolymerization. The electron‐rich vinyl ester double bonds ensure rapid copolymerization with thiol. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4424–4436, 2004     

New Entry to 9-Acetyl/Formyl-Substituted 2H,8H-Pyrano[2,3-f]Chromen-2-ones through Baylis–Hillman Reaction

A new facile route to 9-acetyl/formyl-substituted 2H,8H-pyrano[2,3-f]chromen-2-ones is described. The Baylis–Hillman reaction involving the condensation of methyl vinyl ketone/acrolein with 7-hydroxy-2-oxo-2H-chromen-8-carbaldehydes in the presence of diazabicyclo[2.2.2]octane (DABCO) under N₂ atmosphere at room temperature furnished the desired compounds in good yields.     

Anionic polymerization of vinyl monomers with xanthates

The polymerization of vinyl monomers with various xanthates (potassium tert-butylxanthate, potassium benzylxanthate, zinc n-butylxanthate, etc.) were carried out at 0°C in dimethylformamide. N-Phenylmaleimide, acrylonitrile, methyl vinyl ketone, and methyl methacrylate were found to undergo polymerization with potassium tert-butylxanthate; however, styrene, methyl acrylate, and acrylamide were not polymerized with this xanthate. In the anionic polymerization of methyl vinyl ketone with potassium tert-butylxanthate, the rate of the polymerization was found to be proportional to the catalyst concentration and to the square of the monomer concentration. The activation energy of methyl vinyl ketone polymerization was 2.9 kcal/mole. In the polymerization, the order of monomer reactivity was as follows: N-phenylmaleimide > methyl vinyl ketone > acrylonitrile > methyl methacrylate. The initiation ability of xanthates increased with increasing basicity of the alkoxide group and with decreasing electronegativity of the metal ion in the series, lithium, sodium, and potassium tert-butylxanthate. The relative effects of the aprotic polar solvents on the reactivity of potassium tert-butylxanthate was also determined as follows: diethylene glycol dimethyl ether > dimethylsulfoxide > hexamethylphosphoramide > dimethylformamide > tetrahydrofuran (for methyl vinyl ketone); dimethyl sulfoxide > hexamethylphosphoramide > dimethylformamide ? diethylene glycol dimethyl ether (for acrylonitrile).