Titanium-capped carbon chains as promising new hydrogen storage media

The capacity of Ti-capped sp carbon atomic chains for use as hydrogen storage media is studied using first-principles density functional theory. The Ti atom is strongly attached at one end of the carbon chains via d-p hybridization, forming stable TiC(n) complexes. We demonstrate that the number of adsorbed H(2) molecules on Ti through Kubas interactions depends upon the chain types. For polyyne (n even) or cumulene (n odd) structures, each Ti atom can hold up to five or six H(2) molecules, respectively. Furthermore, the TiC(5) chain effectively terminated on a C(20) fullerene can store hydrogen with an optimal binding energy of 0.52 eV per H(2) molecule. Our results reveal a possible way to explore high-capacity hydrogen storage materials in truly one-dimensional carbon structures.     

Computational study of hydrogen storage in organometallic compounds

The authors have performed a systematic computational study of the hydrogen storage capacity of model organometallic compounds consisting of Sc, Ti, and V transition metal atoms bound to CmHm rings (m=4-6). For all the complexes considered, the hydrogen storage capacity is limited by the 18-electron rule. The maximum retrievable H2 uptake predicted is 9.3 wt% using ScC4H4, slightly better than the 9.1 wt% hydrogen using TiC4H4, and much larger than the approximately 7 wt% hydrogen with VC4H4, where only four H2 molecules can be adsorbed. The kinetic stability of these hydrogen-covered organometallic complexes is reviewed in terms of the energy gap between the highest occupied and lowest unoccupied molecular orbitals and the strength and nature of successive H2 bindings.     

Origins of dihydrogen binding to metal-inserted porphyrins: electric polarization and Kubas interaction

Using density functional theory calculations, we have investigated the interactions between hydrogen molecules and metalloporphyrins. A metal atom, such as Ca or Ti, is introduced for incorporation in the central N(4) cavity. Within local density approximation (generalized gradient approximation), we find that the average binding energy of H(2) to the Ca atom is about 0.25 (0.1) eV/H(2) up to four H(2) molecules, whereas that to the Ti atom is about 0.6 (0.3) eV per H(2) up to two H(2) molecules. Our analysis of orbital hybridization between the inserted metal atom and molecular hydrogen shows that H(2) binds weakly to Ca-porphyrin through a weak electric polarization in dihydrogen, but is strongly hybridized with Ti-porphyrin through the Kubas interaction. The presence of d orbitals in Ti may explain the difference in the interaction types.     

Hydrogen storage and the 18-electron rule

We show that the 18-electron rule can be used to design new organometallic systems that can store hydrogen with large gravimetric density. In particular, Ti containing organic molecules such as C(4)H(4), C(5)H(5), and C(8)H(8) can store up to 9 wt % hydrogen, which meets the Department of Energy target for the year 2015. More importantly, hydrogen in these materials is stored in molecular form with an average binding energy of about 0.55 eV /H(2) molecule, which is ideal for fast kinetics. Using molecular orbitals we have analyzed the maximum number of H(2) molecules that can be adsorbed as well as the nature of their bonding and orientation. The charge transfer from the H(2) bonding orbital to the empty d(xy) and d(x(2)-y(2) ) orbitals of Ti has been found to be singularly responsible for the observed binding of the hydrogen molecule. It is argued that early transition metals are better suited for optimal adsorption/desorption of hydrogen.     

Hydration of gaseous copper dications probed by IR action spectroscopy

Clusters of Cu (2+)(H 2O) n , n = 6-12, formed by electrospray ionization, are investigated using infrared photodissociation spectroscopy, blackbody infrared radiative dissociation (BIRD), and density functional theory of select clusters. At 298 K, the BIRD rate constants increase with increasing cluster size for n >or= 8, but the trend reverses for the smaller clusters where Cu (2+)(H 2O) 6 is less stable than Cu (2+)(H 2O) 8. This trend in stability is consistent with a change in fragmentation pathway from loss of a water molecule for clusters with n >or= 9 to loss of hydrated protonated water clusters and the formation of the corresponding singly charged hydrated metal hydroxide for n 相似文献   

Site-dependent electron-stimulated reactions in water films on TiO2(110)

Electron-stimulated reactions in thin [<3 ML (monolayer)] water films adsorbed on TiO(2)(110) are investigated. Irradiation with 100 eV electrons results in electron-stimulated dissociation and electron-stimulated desorption (ESD) of adsorbed water molecules. The molecular water ESD yield increases linearly with water coverage theta for 0< or =theta< or =1 ML and 11 ML, the water ESD yield per additional water molecule adsorbed (i.e., the slope of the ESD yield versus coverage) is 3.5 times larger than for theta<1 ML. In contrast, the number of water molecules dissociated per incident electron increases linearly for theta< or =2 ML without changing slope at theta=1 ML. The total electron-stimulated sputtering rate, as measured by postirradiation temperature programmed desorption of the remaining water, is larger for theta>1 ML due to the increased water ESD for those coverages. The water ESD yields versus electron energy (for 5-50 eV) are qualitatively similar for 1, 2, and 40 ML water films. In each case, the observed ESD threshold is at approximately 10 eV and the yield increases monotonically with increasing electron energy. The results indicate that excitations in the adsorbed water layer are primarily responsible for the ESD in thin water films on TiO(2)(110). Experiments on "isotopically layered" films with D(2)O adsorbed on the Ti(4+) sites (D(2)O(Ti)) and H(2)O adsorbed on the bridging oxygen atoms (H(2)O(BBO)) demonstrate that increasing the water coverage above 1 ML rapidly suppresses the electron-stimulated desorption of D(2)O(Ti) and D atoms, despite the fact that the total water ESD and atomic hydrogen ESD yields increase with increasing coverage. The coverage dependence of the electron-stimulated reactions is probably related to the different bonding geometries for H(2)O(Ti) and H(2)O(BBO) and its influence on the desorption probability of the reaction products.     

Two-dimensional superstructures and softened C-H stretching vibrations of cyclohexane on Rh(111): effects of preadsorbed hydrogen

Adsorption structures and interaction of cyclohexane molecules on the clean and hydrogen-preadsorbed Rh(111) surfaces were investigated using scanning tunneling microscopy, spot-profile-analysis low-energy electron diffraction, temperature-programmed desorption, and infrared reflection absorption spectroscopy (IRAS). Various ordered structures of adsorbed cyclohexane were observed as a function of hydrogen and cyclohexane coverages. When the fractional coverage (θ(H)) of preadsorbed hydrogen was below 0.8, four different commensurate or higher-order commensurate superstructures were found as a function of θ(H); whereas more densely packed incommensurate overlayers became dominant at higher θ(H). IRAS measurements showed sharp softened C-H vibrational peaks at 20 K, which originate from the electronic interaction between adsorbed cyclohexane and the Rh surface. The multiple softened C-H stretching peaks in each phase are due to the variation in the adsorption distance from the substrate. At high hydrogen coverages they became attenuated in intensity and eventually diminished at θ(H) = 1. The gradual disappearance of the soft mode correlates well with the structural phase transition from commensurate structures to incommensurate structures with increasing hydrogen coverage. The superstructure of adsorbed cyclohexane is controlled by the delicate balance between adsorbate-adsorbate and adsorbate-substrate interactions which are affected by preadsorbed hydrogen.     

Influence of quantum effects on the physisorption of molecular hydrogen in model carbon foams

The physisorption of molecular hydrogen in model carbon foams has been investigated from 50 K to room temperature. The study is carried out within the framework of the density functional theory for quantum liquids at finite temperatures. Calculations are performed in the grand canonical ensemble, i.e., the adsorbed fluid is assumed to be in equilibrium with an external gas of hydrogen molecules with concentrations ranging from 8×10(-4) kg m(-3) to n=71 kg m(-3). It is shown that, while strong zero-point energy effects are present even at room temperature, the adsorption isotherms exhibit only a weak dependence on the explicit incorporation of the bosonic exchange symmetry of hydrogen molecules. The increase of the average particle density prevents the deviations from the Maxwell-Boltzmann statistics to become noticeable if the system is cooled down. The volumetric storage capacity of these materials at low temperatures is about one half of the U. S. Department of Energy goal, while the gravimetric capacity is still far from the standards required by mobile applications. The relation between the microscopic structure of the hydrogen fluid and the calculated adsorption properties is also addressed.     

Ti-MWW分子筛吸附H2O和NH3的结构和振动光谱的密度泛函理论计算

Ti-MWW分子筛具有10元环(10MR)孔道体系和12MR超笼以及外表面杯状空穴,在以H2O2水溶液为氧化剂的催化氧化反应中表现出不同于其他钛硅分子筛的特殊溶剂效应和立体选择性.已有的实验和密度泛函理论(DFT)计算研究表明,骨架Ti(IV)可能分布在10MR孔道和12MR超笼中.最近,我们采用DFT计算研究了Ti-MWW分子筛中骨架钛落位,通过比较Ti/Si替代能和红外振动光谱,提出Ti(IV)最可能落位在T1和T3位,并以[Ti(OSi)4]形态存在,显示960 cm–1钛特征振动峰.[Ti(OSi)4]物种水解时Ti–O键发生选择性断裂,生成具有翻转Ti–OH的[Ti(OSi)3OH]物种.由于Ti中心具有Lewis酸性,与配体分子络合后使Ti(IV)的配位状态改变. Ti-MWW分子筛中不同的骨架Ti(IV)落位和形态可能呈现不同的催化选择性.本文应用DFT研究了Ti-MWW分子筛中T1和T3位上不同钛物种与H2O和NH3的吸附作用,考察了其几何结构、吸附能以及红外振动光谱性质,为深入理解骨架Ti(IV)的微观结构及实验红外光谱表征提供参考数据.计算采用36T簇模型,从MWW分子筛晶体结构中分别以T1和T3为中心截取七层骨架原子,末端设为Si–H键并固定为1.46?.结构优化时松弛内部四层骨架原子并固定最外三层骨架原子.所有计算在B3LYP/6-31G(d,p)理论水平完成,计算的吸附能都经过BSSE校正,计算的频率以约化因子0.961校正.所有计算在Gaussian 09软件包完成.计算结果表明,四配位的[Ti(OSi)4]和[Ti(OSi)3OH]物种都能与H2O或NH3分子作用生成三角双锥的五配位络合物. H2O或NH3分子有选择性地进攻Ti–O键的Ti端,形成近乎直线的L–Ti–O键, L–Ti距离可达2.2–2.4?. T1位钛物种的Lewis酸性比T3位的略高.对于[Ti(OSi)3OH]物种, Ti–OH的存在使得Ti(IV)的酸性大大增强,表现出很强的吸附作用.此外,[Ti(OSi)3OH]物种也能通过Ti–OH基团与H2O和NH3形成氢键络合物,但是其吸附能比形成配位络合物的能量更小,说明配体分子更趋向于吸附在Ti中心形成配位络合物.自然键轨道分析表明, Ti(IV)中心的Lewis酸性归因于Ti的空4p轨道接受配体提供的孤对电子,并且属于LUMO+3.所有吸附络合物的特征振动频率分布在两个区域,即钛特征振动区域和羟基振动区域. T1和T3位的[Ti(OSi)4]物种的钛特征振动频率都在960 cm–1,与H2O形成五配位的吸附络合物之后,钛特征振动频率位移到970 cm–1.[Ti(OSi)3OH]物种的钛特征振动频率分别为990 cm–1(T1位)和970 cm–1(T3位),吸附H2O分子后都位移到980 cm–1.相应的NH3吸附络合物的钛特征振动峰频率都高出5 cm–1.分析表明,钛特征振动模式归属于Ti–O–Si键的不对称伸缩振动的协同振动.在羟基伸缩振动区域,气相H2O、末端Si–OH基团以及Ti–OH基团的羟基伸缩振动在3600–3760 cm–1.吸附H2O后,羟基伸缩振动移到3460–3150 cm–1区域.[Ti(OSi)3OH]物种与NH3和H2O形成氢键络合物后,钛羟基的伸缩振动频率分别红移500和1100 cm–1,出现在2700和3200 cm–1区域.吸附分子的O–H和N–H的伸缩振动频率略微蓝移,这反映了Ti物种具有Lewis酸性.     

Structure and vibrational spectra of Ti(IV) hydroxides and their clusters with expanded titanium coordination. DFT study

Equilibrium structures of H(4-n)Ti(OH)n (n = 2-4) molecules and the Ti(OH)4 dimer and trimers were optimized at the B3LYP level of theory. Theoretical vibrational frequencies of TiO stretching modes obtained with several basis sets were compared with the existing experimental frequencies of these vibrations, and the 6-31+G(d) set was chosen for cluster calculations. Only one energy minimum was found for the [Ti(OH)4](2) dimer, but two isomers without symmetry elements stabilized by internal hydrogen bonds and two isomers, belonging to C(s) and C(i) point groups, with free OH groups were found as minima at the [Ti(OH)4](3) potential energy surface. The structure with the linear arrangement of hexacoordinated titanium atoms in the Ti3O12 skeleton may be proposed for trimeric species observed in liquid titanium alkoxides as the only structure satisfying experimental spectroscopic evidence about the presence of center of inversion in these species. Frequency changes of TiO4 modes which accompany the oligomer formation are predicted and discussed.     

Change of electrical conductivities between hydrated and dehydrated samples of honeycomb sheet structures with mixed oxidation state paddlewheel dirhodium complexes and halide ions

A series of mixed oxidation state compounds, [{Rh(2)(acam)(4)}(3)(μ(3)-X)(2)]·nH(2)O (Hacam = acetamide; X = Cl, n = 4 (1·4H(2)O); X = Br, n = 10 (2·10H(2)O); X = I, n = 10 (3·10H(2)O)) and [{Rh(2)(pram)(4)}(3)(μ(3)-X)(2)]·6H(2)O (Hpram = propionamide; X = Cl (4·6H(2)O), Br (5·6H(2)O), I (6·6H(2)O)) were synthesized and their X-ray structures were determined. In the crystal structure of all of these complexes, dirhodium complexes and halide ions construct 2-D honeycomb sheet arrangements in which the walls consist of Rh(2) units and halide ions lie at the corners. Complexes 1·4H(2)O, 4·6H(2)O, 5·6H(2)O and 6·6H(2)O have three independent Rh(2) units, in which there are two Rh(2)(5+) and one Rh(2)(4+). In these structures, the water molecules hydrogen bond to O atoms and from the N atoms of the amidate ligands. The number of hydrogen bonds from water molecules to the Rh(2)(4+) unit is greater than that to the Rh(2)(5+) units. This suggests that there exists pinning of the oxidation states by water molecules. In the structures of 2·10H(2)O and 3·10H(2)O, all of the Rh(2) units are crystallographically equivalent. In these structures, eight of the 10 water molecules form a honeycomb-like network between the {Rh(2)(acam)(4)}(3)X(2) honeycomb sheets. The former four structures show very low electrical conductivities of ca. 10(-8) S cm(-1) (room temperature, pellets) and the latter structures have the higher values of ca. 10(-4) S cm(-1). In the former complexes, improvement of the values to 10(-6) S cm(-1) was observed, caused by loss of pinning water.     

Hydrogen storage in nanoporous carbon materials: myth and facts

We used Grand canonical Monte Carlo simulation to model the hydrogen storage in the primitive, gyroid, diamond, and quasi-periodic icosahedral nanoporous carbon materials and in carbon nanotubes. We found that none of the investigated nanoporous carbon materials satisfy the US Department of Energy goal of volumetric density and mass storage for automotive application (6 wt% and 45 kg H(2) m(-3)) at considered storage condition. Our calculations indicate that quasi-periodic icosahedral nanoporous carbon material can reach the 6 wt% at 3.8 MPa and 77 K, but the volumetric density does not exceed 24 kg H(2) m(-3). The bundle of single-walled carbon nanotubes can store only up to 4.5 wt%, but with high volumetric density of 42 kg H(2) m(-3). All investigated nanoporous carbon materials are not effective against compression above 20 MPa at 77 K because the adsorbed density approaches the density of the bulk fluid. It follows from this work that geometry of carbon surfaces can enhance the storage capacity only to a limited extent. Only a combination of the most effective structure with appropriate additives (metals) can provide an efficient storage medium for hydrogen in the quest for a source of "clean" energy.     

Photoelectron spectroscopic and theoretical study of aromatics-Pb(m) anionic complexes (aromatics = C6H5, C5H4N, C4H3O, and C4H4N; m = 1-4): a comparative study

The reactions between lead vapored by laser ablation and different aromatic molecules (C6H6, C5H5N, C4H4O, or C4H5N) seeded in argon carrier gas were studied by a reflectron time-of-flight mass spectrometer (RTOF-MS) with a photoelectron spectrometer. The adiabatic electron affinities (EAs) of the dominant anionic products PbmC6H5(-), Pb(m)C5H4N(-) (m = 1-4) and Pb(m)C4H3 (-), Pb(m)C4H4N(-) (m = 1-3) dehydrogenated complexes are obtained from the photoelectron spectra with 308 and 193 nm photon, respectively. It is found that the EAs of Pb(m)C4H4N are higher than those of Pb(m)C6H5, Pb(m)C5H4N, and Pb(m)C4H3O with the same metal number m. The possible structures for Pb(m)C4H4N(-) complexes were calculated with density functional theory (DFT) and the most stable structure was confirmed. The adiabatic detachment energies for the most stable structure were in agreement with the experimental PES results. The calculated density of state (DOS) agrees with the experimental PES spectrum well. It was confirmed by the theoretical calculations that the C4H4N group bonds on lead clusters through the Pb-N sigma bond.     

Gas-phase interaction of thiophene with the Ti(8)C(12)(+) and Ti(8)C(12) met-car clusters

The reactivity of the Ti(8)C(12)(+) met-car cation toward thiophene was investigated using density functional theory (DFT) and mass selective ion chemistry. It is shown that the experimentally observed mass spectrum can be well described by the DFT calculations. In contrast to the weak bonding interactions seen for thiophene on a TiC(001) surface, the Ti(8)C(12)(+) met-car cation is able to interact strongly with up to four thiophene molecules with the cluster staying intact. In the most stable conformation, the thiophene molecules bond to the four low-coordinated Ti(0) sites of Ti(8)C(12)(+) via a eta(5)-C,S coordination. The stability and the activity of the Ti(8)C(12)(+) met-car is observed to increase with an increasing number of attached thiophene molecules at the Ti(0) sites, which is associated with a significant transfer of electron density from thiophene to the cluster. The additional electron density on the Ti(8)C(12)(+) cation cluster, however, is not sufficient to cleave the C-S bonds of thiophene and the dissociation reaction of thiophene is predicted to be a highly activated process. By contrast, DFT calculations for the neutral Ti(8)C(12) met-car predict that the dissociation reaction leading to adsorbed S and C(4)H(4) fragments is energetically favorable for the first thiophene molecule. The binding behavior for subsequent addition of thiophene molecules to the neutral met-car is also presented and compared to that of the cation.     

Reactions of large water cluster anions with hydrogen chloride: formation of atomic hydrogen and phase separation in the gas phase

The reactions of water cluster anions (H2O)n-, n = 30-70, with hydrogen chloride have been studied by Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry. The first HCl taken up by the clusters is presumably ionically dissolved. The solvated electron recombines with the proton, which is thereby reduced to atomic hydrogen and evaporates from the cluster. This process is accompanied by blackbody radiation and collision induced loss of water molecules. Subsequent collisions lead to uptake of HCl and loss of H2O, yielding mixed clusters Cl-(HCl)m(H2O)n until they are saturated with HCl. Those saturated clusters lose H2O and HCl in a characteristic sequence. The final stage of the reaction, involving clusters with m = 0-4 and n = 0-6, is studied in detail with density functional theory calculations. The Cl-(HCl)4(H2O)6 cluster represents an example for supramolecular self-organization in the gas phase: it consists of a tetrahedral Cl-(HCl)4, connected on one side of the tetrahedron to a compact water hexamer.     

CH3SH…HOO开壳型氢键复合物的结构及其电子密度拓扑性质

在DFT-B3LYP/6-311++G**水平下求得CH3SH…HOO复合物势能面上的稳定构型. 计算结果表明, 在HOO以其O8—H7作为质子供体与CH3SH分子中的S5原子为质子受体形成的氢键复合物1和2中, O8—H7明显被“拉长”, 且其伸缩振动频率发生显著的红移, 红移值分别为330.1和320.4 cm-1; 在CH3SH分子以其S5—H6作为质子供体与HOO的端基O9原子为质子受体形成的氢键复合物3和4中, 也存在类似的情况, 但S5—H6伸缩振动频率红移不大. 经MP2/6-311++G**水平计算的4种复合物含BSSE校正的相互作用能分别为-20.81, -20.10, -4.46和-4.52 kJ/mol. 自然键轨道理论(NBO)分析表明, 在CH3SH…HOO复合物1和2中, 引起H7—O8键长增加的因素包括两种电荷转移, 即孤对电子n1(S5)→σ*(H7—O8)和孤对电子n2(S5)→σ*(H7—O8), 其中后者为主要作用. 在复合物3和4中也有相似的电荷转移情况, 但轨道间的相互作用要弱一些. AIM理论分析结果表明, 4个复合物中的S5…H7间和O9…H6间都存在键鞍点, 且其Laplacian量▽2ρ(r)都是很小的正值, 说明这种相互作用介于共价键和离子键之间, 偏静电作用为主.     

Probing the bent bonds in cyclopropane systems for gas storage and separation process: A computational study

The hydrogen, carbon dioxide, and carbon monoxide gas adsorption and storage capacity of lithium-decorated cyclopropane ring systems were examined with quantum chemical calculations at density functional theory, DFT M06-2X functional using 6-31G(d) and cc-pVDZ basis sets. To examine the reliability of M06-2X DFT functional, a few representative systems are also examined with complete basis set CBS-QB3 method and CCSD-aug-cc-pVTZ level of theory. The cyclopropane systems can bind to one Li⁺ ion; however, the corresponding the methylated systems can bind with two Li⁺ ions. The cyclopropane systems can adsorb six hydrogen molecules with an average binding energy of 3.8 kcal/mol. The binding free energy (ΔG) values suggest that the hydrogen adsorption process is feasible at 273.15 K. The calculation of desorption energies indicates the recyclable property of gas adsorbed complexes. The same number of CO₂ and CO gas molecules can also be adsorbed with an average binding energy of −14.4 kcal/mol and −10.7 kcal/mol, respectively. The carbon dioxide showed ~3–4 kcal/mol better binding energy as compared to carbon monoxide and hence such designed systems can function as a potential candidate for the separation of these flue gas molecules. The nature of interactions in complexes was examined with atoms in molecules analysis revealed the electrostatic nature for the interaction of Li⁺ ion with cyclopropane rings. The chemical hardness and electrophilicity calculations showed that the gas adsorbed complexes are rigid and therefore robust as gas storage materials.     

Design for hydrogen storage materials via observation of adsorption sites by computer tomography

An effective method denoted as "computer tomography for materials" (mCT) was employed to study the adsorption sites inside metal-organic frameworks (MOFs) at any positions and any view angles. For MOF-5, the first adsorption site alpha(-COO)3 was clearly observed from the mCT images; it locates at the position where three -COO groups joined like a cup. There are four alpha(-COO)3 sites around the Zn4O cluster. Two of them located at the diagonal of the Zn4O cluster are in the same plane "A", whereas the other two equivalent adsorption sites are in another plane "B", which is about 5.4 A away from the plane A. It was found that the electronegativity of oxygen atoms is very important to the adsorption of hydrogen molecules. The hydrogen amount adsorbed in MOFs might be enhanced by introducing some strong electronegative atoms to the organic linkers or frameworks. On the basis of this point of view, five new MOF materials were designed. The adsorbed amounts both in number of hydrogen molecules per unit cell and weight uptake for all of the designed MOFs were calculated. The adsorption amounts of designed MOFs were improved, and the amount for MOF-d5 at 1 bar is as high as 3.7 wt %. It is nearly 5-6 times of that of MOF-5 as a whole. It can be observed that extra adsorption sites were formed in the pores and the effective occupation rate of pore space was obviously improved viewing from the mCT images. These results may give helpful suggestions for the synthetic experimentalists.     

Hydrogen adsorption on Ti containing organometallic structures grafted on silsesquioxanes

The adsorption of hydrogen molecule on a novel structure of Ti containing organometallic complexes grafted on silsequioxanes (SQ, H₈Si₈O₁₂) was investigated by means of DFT method. The hydrogen adsorption properties of the complex structures TiRH₇Si₈O₁₂ (R = C₄H₃, C₅H₄, C₆H₅) keep almost the same as that of corresponding Ti containing organometallic complexes. Moreover, these complex structures can avoid the problem of transition metal clustering which is a disadvantage for hydrogen adsorption. The maximum number of hydrogen molecules adsorbed was still determined by 18 electron rule, that is to say 5, 4, and 4 H₂ molecules for TiRH₇Si₈O₁₂ with R = C₄H₃, C₅H₄, and C₆H₅, respectively. At the same time, all the average binding energy of H₂ is located in 0.2–1.0 eV, which is an advantage for hydrogen storage at ambient conditions. Therefore, the materials studied here may provide some enlightenment for developing new types of hydrogen storage materials.     

Li修饰B12N12储氢行为的密度泛函理论研究

采用基于密度泛函理论(DFT)的第一性原理投影缀加波方法, 研究了Li 修饰的B₁₂N₁₂笼子的储氢行为.计算结果表明: Li 原子吸附在B₁₂N₁₂笼子的四元环和六元环相交的B－N桥位上, 相对于其它六个高对称吸附位置更稳定, B₁₂N₁₂笼子周围最多可以吸附3 个Li 原子, 最稳定的构型是三个Li 原子同时吸附在N原子顶位(Top-N site). 每个Li 原子的周围能吸附三个氢分子, 笼子外侧还可以吸附两个氢分子, 内部最多可以吸附5 个氢分子. 考虑到笼内和笼外的吸附, B₁₂N₁₂笼子总的储氢量(氢分子)达到9.1% (w).