Mixotrophic Cultivation of Microalgae for Biodiesel Production: Status and Prospects

Biodiesel from microalgae provides a promising alternative for biofuel production. Microalgae can be produced under three major cultivation modes, namely photoautotrophic cultivation, heterotrophic cultivation, and mixotrophic cultivation. Potentials and practices of biodiesel production from microalgae have been demonstrated mostly focusing on photoautotrophic cultivation; mixotrophic cultivation of microalgae for biodiesel production has rarely been reviewed. This paper summarizes the mechanisms and virtues of mixotrophic microalgae cultivation through comparison with other major cultivation modes. Influencing factors of microalgal biodiesel production under mixotrophic cultivation are presented, development of combining microalgal biodiesel production with wastewater treatment is especially reviewed, and bottlenecks and strategies for future commercial production are also identified.     

Screening,Growth Medium Optimisation and Heterotrophic Cultivation of Microalgae for Biodiesel Production

This article presents a study on screening of microalgal strains from the Peking University Algae Collection and heterotrophic cultivation for biodiesel production of a selected microalgal strain. Among 89 strains, only five were capable of growing under heterotrophic conditions in liquid cultures and Chlorella sp. PKUAC 102 was found the best for the production of heterotrophic algal biodiesel. Composition of the growth medium was optimised using response surface methodology and optimised growth conditions were successfully used for cultivation of the strain in a fermentor. Conversion of algal lipids to fatty acid methyl esters (FAMEs) showed that the lipid profile of the heterotrophically cultivated Chlorella sp. PKUAC 102 contains fatty acids suitable for biodiesel production.     

Low-Cost Production of Green Microalga Botryococcus braunii Biomass with High Lipid Content Through Mixotrophic and Photoautotrophic Cultivation

Botryococcus braunii is a microalga that is regarded as a potential source of renewable fuel because of its ability to produce large amounts of lipid that can be converted into biodiesel. Agro-industrial by-products and wastes are of great interest as cultivation medium for microorganisms because of their low cost, renewable nature, and abundance. In this study, two strategies for low-cost production of B. braunii biomass with high lipid content were performed: (i) the mixotrophic cultivation using molasses, a cheap by-product from the sugar cane plant as a carbon source, and (ii) the photoautotrophic cultivation using nitrate-rich wastewater supplemented with CO₂ as a carbon source. The mixotrophic cultivation added with 15 g L^?1 molasses produced a high amount of biomass of 3.05 g L^?1 with a high lipid content of 36.9 %. The photoautotrophic cultivation in nitrate-rich wastewater supplemented with 2.0 % CO₂ produced a biomass of 2.26 g L^?1 and a lipid content of 30.3 %. The benefits of this photoautotrophic cultivation are that this cultivation would help to reduce accumulation of atmospheric carbon dioxide and more than 90 % of the nitrate could be removed from the wastewater. When this cultivation was scaled up in a stirred tank photobioreactor and run with semi-continuous cultivation regime, the highest microalgal biomass of 5.16 g L^?1 with a comparable lipid content of 32.2 % was achieved. These two strategies could be promising ways for producing cheap lipid-rich microalgal biomass that can be used as biofuel feedstocks and animal feeds.     

Mass Cultivation of Microalgae on Animal Wastewater: a Sequential Two-Stage Cultivation Process for Energy Crop and Omega-3-Rich Animal Feed Production

In this study, 97 microalgal strains purchased from algae bank and 50 microalgal strains isolated from local waters in Minnesota were screened for their adaptability growing on a 20-fold diluted digested swine manure wastewater (DSMW). A pool of candidate strains well adapted to the DSMW was established through a high-throughput screening process. Two top-performing facultative heterotrophic strains with high growth rate (0.536?day^?1 for UMN 271 and 0.433?day^?1 for UMN 231) and one strain with high omega-3 unsaturated fatty acid (EPA, 3.75?% of total fatty acids for UMN 231) were selected. Subsequently, a sequential two-stage mixo-photoautotrophic culture strategy was developed for biofuel and animal feed production as well as simultaneous swine wastewater treatment using above two strains. The maximal biomass concentration and lipid content at the first and second stages reached 2.03?g/L and 23.0?%, and 0.83?g/L and 19.0?% for UMN 271 and UMN 231, respectively. The maximal nutrient removals for total phosphorus and ammonia after second-stage cultivation were 100 and 89.46?%, respectively. The experiments showed that this sequential two-stage cultivation process has great potential for economically viable and environmentally friendly production of both renewable biofuel and high-value animal feed and at the same time for animal wastewater treatment.     

Enhanced Harvesting of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> Using Combined Flocculants

In this study, a novel flocculation strategy for harvesting Chlorella vulgaris with combined flocculants, poly (γ-glutamic acid) (γ-PGA) and calcium oxide (CaO), has been developed. The effect of flocculant dosage, the order of flocculant addition, mixing speed, and growth stage on the harvesting efficiency was evaluated. Results showed that the flocculation using combined flocculants significantly decreases the flocculant dosage and settling time compared with control. It was also found that CaO and γ-PGA influenced microalgal flocculation by changing the zeta potential of cells and pH of microalgal suspension. The most suitable order of flocculant addition was CaO first and then γ-PGA. The optimal mixing speed was 200 rpm for 0.5 min, followed by 50 rpm for another 4.5 min for CaO and γ-PGA with the highest flocculation efficiency of 95 % and a concentration factor of 35.5. The biomass concentration and lipid yield of the culture reusing the flocculated medium were similar to those when a fresh medium was used. Overall, the proposed method requires low energy input, alleviates biomass and water contamination, and reduces utilization of water resources and is feasible for harvesting C. vulgaris for biofuel and other bio-based chemical production.     

Oil Crop Biomass Residue-Based Media for Enhanced Algal Lipid Production

The aim of this study was to evaluate the use of hydrolysates from acid hydrolysis of four different oil crop biomass residues (OCBR) as low cost culture media for algae growth. The one-factor-at-a-time method was used to design a series of experiments to optimize the acid hydrolysis conditions through examining the total nitrogen, total phosphorus, chemical oxygen demand, and ammonia nitrogen in the hydrolysates. The optimal conditions were found to be using 3 % sulfuric acid and hydrolyzing residues at 90 °C for 20 h. The hydrolysates (OCBR media) produced under the optimal conditions were used to cultivate the two algae strains, namely UM258 and UM268. The results from 5 days of cultivation showed that the OCBR media supported faster algae growth with maximal algal biomass yield of 2.7 and 3 g/L, respectively. Moreover, the total lipids for UM258 and UM268 were 54 and 35 %, respectively, after 5 days of cultivation, which suggested that the OCBR media allowed the algae strains to accumulate higher lipids probably due to high C/N ratio. Furthermore, over 3 % of omega-3 fatty acid (EPA) was produced for the two algae strains. In conclusion, OCBR media are excellent alternative for algae growth and have a great potential for large-scale production of algae-based ingredients for biodiesel as well as high-value food and pharmaceutical products.     

The Utilization of Post-chlorinated Municipal Domestic Wastewater for Biomass and Lipid Production by <Emphasis Type="Italic">Chlorella</Emphasis> spp. Under Batch Conditions

South Africa has a rich microalgal biodiversity which has the potential to be used for renewable bio-fuel production in the region. Bioprospecting for oleaginous microalgae in KwaZulu Natal Province, South Africa, resulted in the establishment of a microalgal culture collection system for alternative energy research in the country. A potential hyper-lipid-producing Chlorella spp. strain was isolated, purified, and cultured in supplemented post-chlorinated wastewater for biomass and lipid production at the laboratory scale under batch mode. The microalgal strain was cultivated in different strengths of BG-11 media supplemented with wastewater from a local municipal domestic wastewater treatment plant. The Chlorella spp. was grown using ambient dissolved carbon dioxide in shake flasks under photosynthetically active radiation (±120 μmolm⁻²s⁻¹). Microalgal biomass and lipid productivity were monitored at 24-h intervals in the batch mode. The microalgal biomass was analyzed by direct light microscopy and indirectly by spectrophotometry at 600 nm, and the lipids were extracted and quantified. The growth rate of the Chlorella spp. was enhanced in post-chlorinated wastewater supplemented with 5 mM NaNO₃ with maximal biomass productivity. A dramatic increase in lipid yield was achieved with the post-chlorinated wastewater supplemented with 25 mM NaNO₃. Low dosages of free chlorine were found to enhance microalgal growth. These findings serve as a basis for further scale-up trials using municipal wastewater as a medium for microalgal biomass and lipid production.     

Nitrogen Limitation in Neochloris oleoabundans: A Reassessment of Its Effect on Cell Growth and Biochemical Composition

The aim of this work was to reassess the effect of nitrogen limitation (from 0 to 1 mM nitrate), on the growth and the biochemical composition of Neochloris oleoabundans cultures, where only the CO₂ available in the air was provided. Slight differences in the initial nitrate concentration, even minimal increments of 0.2 mM, significantly modify the microalgal response towards nitrogen limitation. This stress condition reduced cell proliferation, but increased cell mass values due to the simultaneous accumulation of two storage compounds: lipids, which contained up to a 55.9 % of total fatty acids; and carbohydrates, which may be primarily composed by starch. The highest biomass and lipid productivities of 98.24 and 43.24 mg/l/day, respectively, were attained at an initial nitrate concentration of 0.6 mM. The theoretical annual projection, based on these productivities, allowed the estimation of the liquid fuel energy yields, which are comparable or even higher than those calculated for several biomass feedstocks such as corn, oil palm, sugarcane, or even fast growing grasses, confirming the potential of nitrogen-limited N. oleoabundans biomass as an appropriate feedstock for biofuel purposes.     

Growth Parameters,Photosynthetic Performance,and Biochemical Characterization of Newly Isolated Green Microalgae in Response to Culture Condition Variations

This work aimed to characterize two native microalgal strains newly isolated from South Mediterranean areas and identified as Chlorella sorokiniana ES3 and Neochloris sp. AM2. The growth properties and biochemical composition of these microalgae were evaluated in different culture media (Algal, BG-11, f/2, and Conway). Among the tested media, nitrate- and phosphate-rich Algal medium provided the maximum biomass productivities (85.5 and 111.5 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively), while the nitrate- and phosphate-deficient f/2 medium resulted in the highest lipid productivities (24.1 and 35.8 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively). The physiological state of both microalgae was investigated under different light and temperature levels using the pulse amplitude-modulated fluorometry. The better photosynthetic efficiency of C. sorokiniana was obtained at 23 °C with a light saturation of 156 μE m^?2 s^?1, while that of Neochloris sp. was achieved at 15 °C with a light saturation of 151 μE m^?2 s^?1. The analysis of fatty acid profile and biodiesel parameters revealed that C. sorokiniana, cultivated in Algal and f/2 media, can be considered as a suitable candidate for high-quality biodiesel production.     

Oil Production Towards Biofuel from Autotrophic Microalgae Semicontinuous Cultivations Monitorized by Flow Cytometry

Two microalgae species (Scenedesmus obliquus and Neochloris oleoabundans) were cultivated in closed sleeve photobioreactors in order to select the best oil producer for further large-scale open raceway pond cultivations, aiming at biofuel production. Scenedesmus obliquus reached a higher maximum biomass concentration (1.41 g l⁻¹) with a lower lipid content (12.8% w/w), as compared to N. oleoabundans [maximum biomass concentration of 0.92 g l⁻¹ with 16.5% (w/w) lipid content]. Both microalgae showed adequate fatty acid composition and iodine values as substitutes for diesel fuel. Based on these results, N. oleoabundans was selected for further open raceway pond cultivations. Under these conditions, N. oleoabundans reached a maximum biomass concentration of 2.8 g l⁻¹ with 11% (w/w) of lipid content. A high correlation between the Nile Red fluorescence intensity measured by flow cytometry and total lipid content assayed by the traditional gravimetric lipid analysis was found for both microalgae, making this method a suitable and quick technique for the screening of microalgae strains for lipid production and optimization of biofuel production bioprocesses. Medium growth optimization for enhancement of microalgal oil production is now in progress.     

Mycelial pellet formation by Rhizopus oryzae ATCC 20344

Factors in a cultivation medium affecting fungal growth morphology and funmaric acid production by Rhizopus oryzae ATCC 20344 were investigated. These factors included the initial pH value and trace metals such as zinc, magnesium, iron, and manganese in the cultivation medium. It was found that a significant change in the growth morphology of R. oryzae ATCC 20344 occurs when the initial pH value is varied. A lower initial pH value in the cultivation medium was inhibitory to fungal growth, and fast growth in the cultivation medium at a higher initial pH value promoted, the formation of large pellets or filamentous forms. Trace metals in the cultivation media also had significant effects on pellet formation and fumaric acid fermentation.     

Isolation of Novel Microalgae from Acid Mine Drainage and Its Potential Application for Biodiesel Production

Microalgae were selected and isolated from acid mine drainage in order to find microalgae species which could be cultivated in low pH condition. In the present investigation, 30 microalgae were isolated from ten locations of acid mine drainage in South Korea. Four microalgae were selected based on their growth rate, morphology, and identified as strains of KGE1, KGE3, KGE4, and KGE7. The dry biomass of microalgae species ranged between 1 and 2 g L^?1 after 21 days of cultivation. The growth kinetics of microalgae was well described by logistic growth model. Among these, KGE7 has the highest biomass production (2.05?±?0.35 g L^?1), lipid productivity (0.82?±?0.14 g L^?1), and C16–C18 fatty acid contents (97.6 %). These results suggest that Scenedesmus sp. KGE 7 can be utilized for biodiesel production based on its high biomass and lipid productivity.     

Simultaneous production of citric acid and erythritol from crude glycerol by Yarrowia lipolytica Wratislavia K1

This study shows a possible microbial process for utilization of crude glycerol generated by the biodiesel industry for citric acid and erythritol production. Simultaneous production of citric acid and erythritol under nitrogen-limited conditions with glycerol as the carbon source was achieved with an acetate negative mutant of Y. lipolytica Wratislavia K1 in fed-batch cultivations. The effect of the initial glycerol concentration (from 30–180 g dm⁻³) on the citrate and erythritol production was investigated. As a result of the experiments, maximum citric acid production (110 g dm⁻³) and a very high amount of erythritol (81 g dm⁻³) were determined after 168 h of fed-batch cultivation with the initial glycerol concentration of 150 g dm⁻³ and the total glycerol concentration of 250 g dm⁻³. In addition, the citric acid to isocitric acid ratio of the products from this strain was 35.5:1. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Lipid Accumulation by Pelletized Culture of Mucor circinelloides on Corn Stover Hydrolysate

Microbial oil accumulated by fungal cells is a potential feedstock for biodiesel production, and lignocellulosic materials can serve as the carbon source to support the fungal growth. The dilute acid pretreatment of corn stover can effectively break down its lignin structure, and this process generates a hydrolysate containing mostly xylose at very dilute concentration and numerous by-products that may significantly inhibit the cell growth. This study utilized corn stover hydrolysate as the culture media for the growth of Mucor circinelloides. The results showed that Mucor cells formed pellets during the cell growth, which facilitates the cell harvest from dilute solution. The results also showed that the inhibitory effect of furfural, 5-hydroxymethylfurfural (HMF), and acetic acid could be avoided if their concentration was low. In fact, all these by-products may be assimilated as carbon sources for the fungal growth. The results proved the feasibility to reuse the cultural broth water for acid pretreatment and then use for subsequent cell cultivation. The results will have a direct impact on the overall water usage of the process.     

Ultrasound‐enhanced and microwave‐assisted extraction of lipid from Dunaliella tertiolecta and fatty acid profile analysis

Microalgal lipid is considered as a potential biodiesel resource due to its advantages compared to other bioresources. The production of biofuel from microalgae includes several stages like microalgae cultivation, biomass harvest, biomass treatment, lipid extraction, and the ultimate biodiesel synthesis. Lipid extraction is closely associated with the productivity and cost of energy production. In the present study, lipid of green algae Dunaliella tertiolecta was extracted by chemical agents with involvement of ultrasound and microwave. The optimization of experimental conditions was carried out by response surface methodology and orthogonal test design. Using the ultrasonic technique, an extraction rate of 45.94% was obtained under the optimum conditions of ultrasonic power 370 W, extraction time 5 min and liquid/solid ratio 125 mL/g. The extraction rate of 57.02% was obtained by the means of microwave assistance under the optimized conditions of extraction time 160 s, microwave power 490 W and liquid/solid ratio 100 mL/g. The comparison of the two results indicated microwave was more effective than ultrasound in extracting process. When the two techniques were utilized in combination, the optimized condition was ultrasonic power 320 W, ultrasonic time 4 min, microwave power 280 W, microwave time 120 s and liquid/solid ratio 100 mL/g, and the extraction rate was 49.97%.     

Sustainability Evaluation of Immobilized Acid-Adapted Microalgal Technology in Acid Mine Drainage Remediation following Emergy and Carbon Footprint Analysis

Sustainability evaluation of wastewater treatment helps to reduce greenhouse gas emissions, as it emphasizes the development of green technologies and optimum resource use rather than the end-of-pipe treatment. The conventional approaches for treating acid mine drainages (AMDs) are efficient; however, they need enormous amounts of energy, making them less sustainable and causing greater environmental concern. We recently demonstrated the potential of immobilized acid-adapted microalgal technology for AMD remediation. Here, this novel approach has been evaluated following emergy and carbon footprint analysis for its sustainability in AMD treatment. Our results showed that imported energy inputs contributed significantly (>90%) to the overall emergy and were much lower than in passive and active treatment systems. The microalgal treatment required 2–15 times more renewable inputs than the other two treatment systems. Additionally, the emergy indices indicated higher environmental loading ratio and lower per cent renewability, suggesting the need for adequate renewable inputs in the immobilized microalgal system. The emergy yield ratio for biodiesel production from the microalgal biomass after AMD treatment was >1.0, which indicates a better emergy return on total emergy spent. Based on greenhouse gas emissions, carbon footprint analysis (CFA), was performed using default emission factors, in accordance with the IPCC standards and the National Greenhouse Energy Reporting (NGER) program of Australia. Interestingly, CFA of acid-adapted microalgal technology revealed significant greenhouse gas emissions due to usage of various construction materials as per IPCC, while SCOPE 2 emissions from purchased electricity were evident as per NGER. Our findings indicate that the immobilized microalgal technology is highly sustainable in AMD treatment, and its potential could be realized further by including solar energy into the overall treatment system.     

Biofuels from microalgae biomass: A review of conversion processes and procedures

Achieving the EU 2030 vision of a 15% minimum amount of biofuels utilized in the road transportation require more research on biofuel production from biomass feedstock. To this end, this review study examines the use of green, deep eutectic solvents and direct transesterification approaches for biomass conversion to biofuels. Next, biogas production from anaerobic co-digestion of microalgae biomass is presented. Lastly, the effect of operating conditions, as well as advantages and limitations of several biomass conversion techniques are outlined. Of note, this study presents promising microalgae conversion processes which could be progressed are the use of bio-based solvents and supercritical fluids for biodiesel production, hydrothermal liquefaction for biogas production, microwave-induced pyrolysis for syngas production, and ultrasound/microwave enhanced extraction for bio-oil production. These are based on the possibility of high yield and process economics. We have also enumerated knowledge gaps needed to propel future studies.     

Effect of α-Ketoglutarate on Monoclonal Antibody Production of Hybridoma Cell Lines in Serum-Free and Serum-Containing Medium

Process development and optimization for increase population growth and protein productivity in mammalian cell culture have been studied for many years. In this study, the behavior of hybridoma cells was investigated using six-well micro-titer plate systems with a working volume of 4 ml. Mouse hybridoma cell lines D2 and 2C83G2 were seeded in serum-free and serum-containing media and cultured for 8 days. alpha-Ketoglutarate is an integral component of the tricarboxylic acid (TCA) cycle and is produced from glutamine via glutamate. To study its effect on cell growth, metabolism, and monoclonal antibody (mAb) production, 2 mM alpha-ketoglutarate (pH 7.2) was added in both media at the beginning of the cultivation and in another set after 72 h. High cell density was observed in D2 cell culturing in serum-free medium, while 2C83G2 cell line showed high cell density in serum-containing medium. However, both cell lines cultured in serum-free medium gave viability above 70% when grown for 8 days. The supplement of 2 mM alpha-ketoglutarate supported cell growth and mAb production of both hybridoma cell lines in serum-free and serum-containing medium. The addition of alpha-ketoglutarate at the beginning of the batch cultivation gave better result in cell growth and mAb production as compared to alpha-ketoglutarate supplementation after 72 h. However, addition after 72 h was better than no addition at all. This indicates that alpha-ketoglutarate have a positive effect on production and release of antibody.     

Mushroom Polysaccharides and Lipids Synthesized in Liquid Agitated and Static Cultures. Part I: Screening Various Mushroom Species

The effect of four synthetic media containing glucose (initial concentration 30?g?l^?1) on mycelial growth, exopolysaccharides (EPS) and cellular lipids production was examined in 11 mushroom species after 12 and 16?days of culture in static- and shake-flasks. Fatty acid analysis of cellular lipids produced was also performed. Agitation had a positive effect on biomass production, glucose consumption and lipid biosynthesis. Media that favoured the production of biomass were not suitable for EPS biosynthesis and vice versa. Biomass values varied from ??1.0?g?l^?1 (Lentinula edodes) to ??19?g?l^?1 (Pleurotus ostreatus), while the highest EPS quantity achieved ranged between 1.6 and 1.8?g?l^?1 (for Ganoderma lucidum and L. edodes, respectively). Quantities of total cellular lipids varied between 2.5 and 18.5?% w/w, in dry mycelial mass for the fungi tested. Lipid in dry weight values were influenced by the medium composition. Cellular lipids presented noticeable quantities of poly-unsaturated fatty acids like linoleic acid. Compared to most of the mushrooms tested, lipids of Volvariella volvacea were more saturated. The ability of several mushroom species of our study to produce in notable quantities the above-mentioned added-value compounds renders these fungi worthy for further investigations.     

Biotechnological Utilization of Biodiesel-Derived Glycerol for the Production of Ribonucleotides and Microbial Biomass

Ten yeast strains were evaluated concerning their capabilities to assimilate biodiesel-derived glycerol in batch cultivation. The influence of glycerol concentration, temperature, pH and yeast extract concentration on biomass production was studied for the yeast selected. Further, the effect of agitation on glycerol utilization by the yeast Hansenula anomala was also studied. The yeast H. anomala CCT 2648 showed the highest biomass yield (0.30?g?g^?1) and productivity (0.19?g?L^?1?h^?1). Citric acid, succinic acid, acetic acid and ethanol were found as the main metabolites produced. The increase of yeast extract concentration from 1 to 3?g?L^?1 resulted in high biomass production. The highest biomass concentration (21?g?L^?1), yield (0.45?g?g^?1) and productivity (0.31?g?L^?1?h^?1), as well as ribonucleotide production (13.13?mg?g^?1), were observed at 700?rpm and 0.5?vvm. These results demonstrated that glycerol from biodiesel production process showed to be a feasible substrate for producing biomass and ribonucleotides by yeast species.