Low‐temperature preparation of crystalline barium sulfide

Barium sulfide (BaS) is a compound with many uses, both commercially and in the scientific research world. Normally, BaS is prepared from the high‐temperature reduction of barite (BaSO₄) with carbon, a process that eliminates CO₂ as a by‐product. Temperatures during the reduction step can be as high as 1200 °C. We now demonstrate that barium disilylamides can be used as precursors to the formation of crystalline BaS in their reactions with hydrogen sulfide gas. As a major advantage, the temperature of BaS production can be lowered to 25–200 °C. The by‐products formed during the reaction are ammonium sulfides, resulting from the acid–base reaction of the liberated amines with excess H₂S. Fortunately, these salts decompose thermally in vacuum under mild conditions. As determined by X‐ray powder diffraction, the BaS formed in this reaction is crystalline, in the face‐centered cubic space group Fm3m. Copyright © 2005 John Wiley & Sons, Ltd.     

Useful and accessible organometallic precursors for preparation of zinc sulfide and indium sulfide thin films via solution pyrolysis (printing) method

Polycrystalline β-zinc sulfide thin films were prepared by solution pyrolysis of an ethylzinc isopropylthiolate–zinc bis(dibutyldithiocarbamate) combined precursor (EtZnSiPr–Zn(S₂CNnBu₂)₂) in chloroform solution on glass or silicon(111) substrates at 300°C. Homogeneous but amorphous indium sulfide thin films were obtained from butylindium bis(isopropylthiolate) (nBuInSiPr₂) in P-xylene on these substrates at 300°C similarly. The sulfide thin films obtained were characterized by means of X-ray photoelectron spectroscopy (XPS), X-ray fluorescence Microanalysis, scanning electron microscopy (SEM) and optical band gap measurements.     

Synthesis and characterization of polyarylene sulfide sulfone/ketone amide

High-molecular-weight polyarylene sulfide sulfone amide (PASSA) and polyarylene sulfide ketone amide (PASKA) were synthesized from diamine monomers containing sulfone or ketone group by a low temperature solution polycondensation reaction in anhydrous N-methylpyrrolidone (NMP). The structures of the monomers and corresponding polymers were identified by IR-spectra and UV spectra. The maximum intrinsic viscosities of the polymers were 0.72 dL/g in NMP (PASSA) and 0.62 dL/g in H₂SO₄ (PASKA) at 30 ± 0.1°C, respectively. The polymers possess excellent thermal properties with the glass transition temperature (T _g) for PASSA and PASKA are 274.9°C and 195.2°C, respectively. The initial degradation temperatures (T _i) for PASSA and PASKA are 461.55°C and 467.08°C, respectively, which suggests that PASSA and PASKA are excellent heat-resistant materials. The dissolvability experiments show that PASSA and PASKA are also corrosion resistance materials. __________ Translated from Journal of Ji Lin University (Science Edition), 2008, 46 (1) (in Chinese)     

Synthesis and Characterization of Poly(meta-aryl sulfide amide amide)

Poly(meta-aryl sulfide amide amide) (m-PASAA) was prepared with aromatic nucleophilic substitution reaction: by the step polycondensation of sodium sulfide(Na₂S· xH₂O) with 3,3′ -bis(4-diflurobenzoyl) aryl diamine between 180–202°C at atmospheric pressure. The polymers were characterized by FT-IR spectrum, ¹H-NMR spectrum, ¹³C-NMR spectrum, X-ray diffraction, element analyzer, DSC, TGA, AFM, instron universal tester and dissolvability experiment. The intrinsic viscosity of m-PASAA was 0.41–0.46 dl/g obtained with optimum synthesis conditions. The polymers were found to have excellent thermal performance with glass transition temperature (T_g) of 233.5–277.8°C, initial degradation temperature (T_d) of 447–456.7°C. They could afford flexible and strong films with tensile strengths 38.4–46.1MPa. At the same time, their solubility was much better than polyphenylene sulfide (polyphenylene sulfide scarcely dissolves in whole organic solvents under 200°C (1 Yang, J. 2006. PAS resin and its application, China: Chemical Industry Press.  [Google Scholar])).     

Effect of temperature and water as additive on the MW and thermal properties of copoly(p-phenylene/biphenylene sulfide)s

Copoly(p-phenylene/biphenylene sulfide)s, PPBS were prepared from sodium sulfide trihydate(Na₂S·3H₂O), p-dichlorobenzene (DCB), and 4,4′-dibromobiphenyl (DBB) comonomers in N-methyl-2-pyrrolidinone (NMP) solvent using an autoclave. The molecular weights of PPBS copolymers were determined by high temperature (210°C) GPC in 1-chloronaphthalene solvent. The reaction temperature had little effect on the molecular weights of PPBS copolymers with water as additive at the level of 3 mol H₂O per 1 mol Na₂S. PPBS copolymer, however, showed maximum molecular weight of M_w = 24.1 × 10³ with the total water content of 9 mol H₂O per 1 mol Na₂S at an optimum polymerization temperature of 270°C. The resulting PPBS copolymer sample showed higher T_g (by 30°C) and lower T_m (by 10°C) than PPS homopolymer prepared under similar conditions. © 1996 John Wiley & Sons, Inc.     

One-pot Synthesis and Characterization of Poly(meta-aryl sulfide sulfone imide imide)

Poly(meta-aryl sulfide sulfone imide imide) (m-PASSII) was synthesized by one-pot process using 4-chlorophthalic anhydride, 3,3′-diamino diphenyl sulfone and sodium sulfide (Na₂S· xH₂O) as starting materials in N-methyl-2-pyrrolidone at atmospheric pressure. The intrinsic viscosity of m-PASSII was obtained with optimum synthesis conditions is 0.21-0.27 dl/g. The polymer and the separated intermediates which generated during the synthesis process were characterized by elemental analysis, FT-IR spectrum, ¹H-NMR spectrum, X-ray diffraction, DSC, TGA and dissolvability experiment. The polymer is found to have excellent thermal performance with glass transition temperature (T _g ) of 224°C and initial degradation temperature (T _d ) of 441°C. Moreover, the polymer is dissolvable in strong polar solvents.     

Activity of catalysts in the synthesis of dimethyl sulfide from dimethyl disulfide

Dimethyl disulfide conversion at T = 190–350°C over catalysts containing acid and basic sites is reported. The products of this reaction are dimethyl sulfide, methanethiol, hydrogen sulfide, carbon disulfide, methane, and ethylene. At 190°C, these products form via parallel reactions. At higher temperature of up to 350°C, dimethyl sulfide can form by the condensation of the resulting methanethiol. The strong basic sites of the catalysts are uninvolved in dimethyl sulfide formation. Over catalysts whose surface has only strong protonic or strong Lewis acid sites, dimethyl sulfide formation does take place, but slowly and nonselectively. The highest dimethyl sulfide formation activity and selectivity are shown by catalysts having medium-strength basic sites along with strong protonic and strong Lewis acid sites.     

Thermolysis of reactive oligo(p-phenylene sulfide) containing disulfide bond

Oligo(phenylene sulfide) (OPS) containing one disulfide bond at the end of the chain, which was obtained by the oxidative polymerization of diphenyl disulfide, had a relatively low Td_10%(temperature for 10% weight loss) of 412 °C because of degradation of the disulfide bond. But this thermal cleavage of the disulfide bond promoted the curing reaction through thiophenoxy radical formation. OPS was allowed to react with diiodobenzene at 220 °C. The thermal stability of OPS was improved through the consumption of the disulfide bond and the coupling of the chain.     

Application of zone-drawing and zone-annealing method to poly(p-phenylene sulfide) fibers

A zone-drawing and zone-annealing treatment was applied to poly(p-phenylene sulfide) fibers in order to improve their mechanical properties. The zone-drawing (ZD) was carried out at a drawing temperature of 90°C under an applied tension of 5.5 MPa, and the zone-annealing (ZA) was carried out at an annealing temperature of 220°C under 138.0 MPa. The differential scanning calorimetry (DSC) thermogram of the ZD fiber had a broad exothermic transition (T_c = 110°C) attributed to cold-crystallization and a melting endotherm peaking at 286°C. The T_c of the ZD fiber was lower than that (T_c = 128°C) of the undrawn fiber. In the temperature dependence of storage modulus (E′) for the ZD fiber, the E′ values decreased with increasing temperature, but increased slightly in the temperature range of 90–100°C, and decreased again. The slight increase in E′ was attributable to the additional increase in the crosslink density of the network, which was caused by strain-induced crystallization during measurement. The resulting ZA fiber had a draw ratio of 6.0, a degree of crystallinity of 38%, a tensile modulus of 8 GPa, and a tensile strength of 0.7 GPa. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1731–1738, 1998     

The effect of potential on the gold dissolution in cyanide solutions in the presence of sulfide ions

The effect of potential on the rate of gold dissolution in the cyanide solutions in the presence of sulfide ions is studied. The dependences of current on the time after the electrode surface renewal were measured under the potentiostatic conditions. The majority of experiments were performed in the solution of the following composition, M: 0.1 KCN, 0.1 KOH, 0.01 KAu(CN)₂, (1.5–2) × 10^?5 Na₂S at 23°C. It is shown that, at the potentials more positive than ?0.1 V (NHE), the rate of gold dissolution starts to increase as soon as the surface is renewed, which is associated with high-rate chemisorption of catalytically active sulfide ions. At E < ?0.1 V, the chemisorption proceeds slowly, and a considerable increase in the current takes much time. Therefore, in the potentiodynamic measurements, at E < ?0.1 V, no catalytic effect of sulfide ions is observed. When the ratio between the concentrations of sulfide and cyanide ions is decreased, the potential, which, by convention, bounds the aforementioned ranges, shifts in the positive direction. Plausible explanations for these regularities are proposed.     

Dimethyl disulfide conversion into dimethyl sulfide in the presence of sulfidized catalysts

The conversion of dimethyl disulfide in the presence of various supported sulfidized metal-containing catalysts at atmospheric pressure and T = 150−350°C was studied. Sulfidized transition metals supported onto aluminum oxide were more active than catalysts based on a carbon support, silicon dioxide, amorphous aluminosilicate, and zeolite ZSM-5. The most active catalyst was 10% Co/Al₂O₃ prepared with the use of cobalt acetate as an active component precursor and treated with a mixture of hydrogen sulfide with hydrogen at T = 400°C. From kinetic data, it follows that all of the reaction products were formed simultaneously at a temperature of <200°C, whereas a consecutive reaction scheme took place at higher temperatures. In the presence of a sulfidized alumina-cobalt catalyst, the output of dimethyl sulfide was higher than that reached with the use of other well-known catalysts.     

Facile esterification promoted by the triphenylstibine oxide-phosphorus sulfide (Ph3SbO/P4S10) system

Various esters are conveniently prepared by direct esterification of the corresponding carboxylic acids with alcohols catalyzed by a triphenylstibine oxide–phosphorus(V) sulfide combined system (Ph₃SbO/P₄S₁₀) under mild conditions (25–80 °C).     

Poly(p‐phenylene sulfide) nonisothermal cold‐crystallization

The poly(p‐phenylene sulfide) (PPS) nonisothermal cold‐crystallization behavior was investigated in a wide heating rate range. The techniques employed were the usual Differential Scanning Calorimetry (DSC), and the less conventional FT‐IR spectroscopy and Energy Dispersive X‐ray Diffraction (EDXD). The low heating rates (Φ) explored by EDXD (0.1 K min^?1) and FT‐IR (0.5–10 K min^?1) are contiguous and complementary to the DSC ones (5–30 K min^?1). The crystallization temperature changes from 95 °C at Φ = 0.05 K min^?1 to 130 °C at Φ = 30 K min^?1. In such a wide temperature range the Kissinger model failed. The model is based on an Arrhenius temperature dependence of the crystallization rate and is widely employed to evaluate the activation energy of the crystallization process. The experimental results were satisfactorily fit by replacing in the Kissinger model the Arrhenius equation with the Vogel–Fulcher–Tamann function and fixing U* = 6.28 k J mol^?1, the activation energy needed for the chains movements, according to Hoffmann. The temperature at which the polymer chains are motionless (T_∞ = 42 °C) was found by fitting the experimental data. It appears to be reasonable in the light of our previously reported isothermal crystallization results, which indicated T_∞ = 48 °C. Moreover, at the lower heating rate, mostly explored by FT‐IR, a secondary stepwise crystallization process was well evidenced. In first approximation, it contributes to about 17% of the crystallinity reached by the sample. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2725–2736, 2005     

Hydrogenolysis of dimethyl disulfide in the presence of bimetallic sulfide catalysts

The hydrogenolysis of dimethyl disulfide in the presence of Ni,Mo and Co,Mo bimetallic sulfide catalysts was studied at atmospheric pressure and T = 160–400°C. At T ≤ 200°C, dimethyl disulfide undergoes hydrogenolysis at the S-S bond, yielding methanethiol in 95–100% yield. The selectivity of the reaction decreases with increasing residence time and temperature due to methanethiol undergoing condensation to dimethyl disulfide and hydrogenolysis at the C-S bond to yield methane and hydrogen sulfide. The specific activity of the Co,Mo/Al₂O₃ catalyst in hydrogenolysis at the S-S and C-S bonds is equal to or lower than the total activity of the monometallic catalysts. The Ni,Mo/Al₂O₃ catalyst is twice as active as the Ni/Al₂O₃ + Mo/Al₂O₃ or the cobalt-molybdenum bimetallic catalyst.     

Simultaneous catalytic hydrolysis of carbonyl sulfide and carbon disulfide over Al2O3-K/CAC catalyst at low temperature

In this work, a series of coal-based active carbon(CAC) catalysts loaded by Al2O3were prepared by sol-gel method and used for the simultaneous catalytic hydrolysis of carbonyl sulfide(COS) and carbon disulfide(CS2) at relatively low temperatures of 30-70 ℃. The influences of calcinations temperatures and operation conditions such as: reaction temperature, O2concentration, gas hourly space velocity(GHSV) and relative humidity(RH) were also discussed respectively. The results showed that catalysts with 5.0 wt% Al2O3calcined at 300 ℃ had superior activity for the simultaneous catalytic hydrolysis of COS and CS2. When the reaction temperature was above 50 ℃, catalytic hydrolysis activity of COS could be enhanced but that of CS2was inhibited. Too high RH could make the catalytic hydrolysis activities of COS and CS2decrease. A small amount of O2introduction could enhance the simultaneous catalytic hydrolysis activities of COS and CS2.     

Chemical and electrochemical processes in low-temperature superionic hydrogen sulfide sensors

Effect the morphology of the surface of the working electrode (PbS) exerts on the sensitivity of a low-temperature potentiometric hydrogen sulfide sensor is studied. The sensor, which is based on electrochemical cell Na _x WO₃/NASICON/PbS, may be used for fast selective detection of hydrogen sulfide in air in natural conditions. It is demonstrated that the sensors with PbS that are deposited out of solution have a faster response than the pressed-to ones. The dependence of EMF on the hydrogen sulfide concentration for the former is linear in semilogarithmic coordinates. Thus difference is explained by the microstructure of the lead sulfide layer. It is shown that the lead sulfide interaction with hydrogen sulfide involves a reversible partial reduction of sulfur and lead at the surface. The species that form in so doing contain sulfur atoms in lower oxidation degrees (poly-and oligo sulfides, sulfite). A mechanism of the sensor operation is proposed on the basis of data yielded by experiment and quantum-chemical simulation. The mechanism includes reversible transport of hydrogen from sulfur atoms to oxygen atoms.     

Synthesis of nickel sulfide and nickel–iron sulfide nanoparticles from nickel dithiocarbamate complexes and their photocatalytic activities

[ Ni(dtc)₂] (dtc = N-(pyrrole-2-ylmethyl)-N-thiophenemethyldithiocarbamate ( 1 ), N-methylferrocenyl-N-(2-phenylethyl)dithiocarbamate ( 2 ), N-furfuryl-N-methylferrocenyldithiocarbamate ( 3 ), and (N-[pyrrole-2-ylmethyl]-N-thiophenemethyldithiocarbamato-S,S′)(thiocyanato-N)(triphenylphosphine)nickel(II) ( 4 ) complexes were prepared and characterized by elemental analysis, infrared, ultraviolet–visible, and nuclear magnetic resonance (¹H and ¹³C) spectroscopies. The data were consistent with the formation of square planar nickel(II) complexes, which was confirmed by single-crystal X-ray diffraction studies on 2 and 4 . Fe···Fe interactions exhibited by complex 2 led to supramolecular aggregation. The structure of 4 reveals intermolecular and intramolecular C-H···Ni anagostic interactions. The anion-sensing properties of 2 were studied with halide ions by cyclic voltammetry. It was observed that 2 acts as sensor for bromide. Complexes 1 , 2 , and 3 , were utilized to prepare nickel sulfide, nickel–iron sulfide-1, and nickel–iron sulfide-2, respectively. The composition, structure, morphology, and optical properties of nickel sulfide and nickel–iron sulfides were examined using powder X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray spectroscopy, ultraviolet–visible, fluorescence, and infrared spectroscopy. Powder X-ray diffraction patterns of nickel sulfide, nickel–iron sulfide-1, and nickel–iron sulfide-2 indicate the formation of orthorhombic Ni₉S₈, cubic NiFeS₂, and cubic Ni₂FeS₄, respectively. The photocatalytic activities of as-prepared nickel sulfide and nickel–iron sulfide-1 nanoparticles were investigated for photodegradation of methylene blue and rhodamine-B under ultraviolet irradiation. Nickel–iron sulfide-1 nanoparticles show slightly higher photodegradation efficiency compared with the nickel sulfide nanoparticles.     

Sensitivity of semiconductor metal oxides (SnO2, WO3, ZnO) to hydrogen sulfide in dry and humid gas media

The sensitivity of semiconductor sensors based on tin (SnO₂), tungsten (WO₃), and zinc (ZnO) oxides and SnO₂ with catalytic admixtures of La₂O₃ and CuO to hydrogen sulfide is studied at H₂S concentration 50 ppm in dry air in the temperature range 100–600°C. Concentration dependences for oxides are studied in the temperature range 350–450°C and H₂S concentration range 0.5–100 ppm at the humidity of gas media 0–80 rel. %. It is shown that, under the specified conditions, the resistance and of sensors to H₂S in air weakly depends on humidity. It was found that sensors based on SnO₂ with an admixture of 3% La₂O₃ working at 350°C are the best for the registration of H₂S by the set of performance and operation characteristics. A presumable mechanism of H₂S interaction with oxide surfaces is considered, according to which each H₂S molecule releases seven electrons to the conductivity zone of the oxide and molecules of metal oxides in the surface layer are, possibly, partially replaced by sulfide molecules.     

Über die Darstellung von CaS,SrS und BaS aus den Metallen und Schwefelwasserstoff in flüssigem Ammoniak

Preparation of CaS, SrS, and BaS from the Metals and Hydrogen Sulfide in Liquid Ammonia. A method is described, by which CaS, SrS, and BaS can be prepared by reaction of the metals in liquid ammonia with excess hydrogen sulfide at temperatures ranging from ?78 to ?33°C and by subsequent outgassing of the reaction products at 700–800°C in a high vacuum. Analytical data and lattice parameters of sulfides prepared in this way are communicated.     

Multiscale physicochemical characterization of a short glass fiber–reinforced polyphenylene sulfide composite under aging and its thermo‐oxidative mechanism

In this paper, the thermo‐oxidation for a short glass fiber–reinforced polyphenylene sulfide (PPS/GF) composite was experimentally and theoretically studied by a wide range of physicochemical and mechanical techniques. The accelerated thermal aging temperatures were fixed at 100°C, 140°C, 160°C, 180°C, and 200°C. Firstly, the results of weight loss under aging indicate the formation of volatile products because of chain scission of end groups. Also, Fourier‐transform infrared spectroscopy (FTIR) results suggest that the formation and accumulation of carbonyl group arising from the formation of hydroperoxides in oxidative propagation process. In all cases of different thermal oxidation temperatures, it is hard to observe some significant change about the concentration of carbonyl group during the induction time. This induction time depends inversely on the oxidation temperature. Moreover, the cross‐linking and chain scissions exist together according to the results of rheological results and it is easier to see the cross‐linking phenomenon at the beginning of oxidation while the chain scissions are more pronounced, with the oxidation process developing further. In aspect of mechanical properties, σ_max increases at the beginning of oxidation because of cross‐linking, and subsequently, the σ_max always decreases because of thermo‐oxidation of the PPS matrix. In addition, the detailed thermo‐oxidation processes are fully discussed in the end of this study. A mechanistic schema has been proposed to present different oxidation reactions of PPS polymer and then a kinetic model has been extracted from this mechanism. Afterwards, the model has been verified by experimental results at different temperatures.