交联密度对聚硅氧烷/聚丙烯酸酯同步互穿聚合物网络阻尼材料性能的影响

阻尼性能;交联密度对聚硅氧烷/聚丙烯酸酯同步互穿聚合物网络阻尼材料性能的影响     

胶乳型互穿聚合物网络(LIPN)阻尼材料

详细讨论了LIPN体系的阻尼原理。高分子材料在发生玻璃化转变时,大分子链段在玻璃化转变温度Tg附近的运动可以把振动能转化为热能耗散掉,借此可以达到减振、降噪的目的。这也是LIPN作为阻尼材料的依据。阻尼笥能是分子运动的结果,LIPN组分间的相容性及相互作用是影响阻尼性能的重要因素;采用不同的合成方法,将形成不同的微观形态,也会导致材料阻尼性能的差异。因此本文又深入探讨了各种合成参数及合成条件对体系性能的影响,并且指出了合成过程中特别需要注意的几个问题。     

聚氨酯/乙烯基酯树脂互穿聚合物网络阻尼性能的研究

采用二步法制备了聚氨酯／乙烯基酯树脂互穿聚合物网络,动态力学分析法研究了ＩＰＮ的阻尼性能。结果表明,聚氨酯／乙烯基酯树脂互穿聚合物网络出现宽温度阻尼范围。当聚氨酯／乙烯基酯树脂＝４０／６０时,材料的宽温度范围的阻尼性能最好。在体系中引入柔性链可改善低温阻尼性能,而引入刚性链则降低阻尼值、提高阻尼温度、阻尼温度范围变窄。在体系中引入大侧基能显著提高聚氨酯／乙烯基酯树脂互穿聚合物网络的阻尼性能,提高交     

均匀增粘剂在橡胶阻尼材料中的应用

本文对均匀增粘剂的作用机理和应用进行了研究。结果表明:均匀增粘剂可显著降低橡胶阻尼材料胶料的门尼粘度,改善混炼胶体系的混炼工艺、分散性和降低胶料相的尺寸,提高相态稳定性,优化了产品的表观质量,对橡胶阻尼材料的力学性能和阻尼性能影响不大。当用量为4份时,可达到加工性能和使用性能的最佳平衡。     

聚氨酯互穿聚合物网络阻尼性能研究进展

介绍了聚氨酯互穿聚合物网络（ＰＵ ＩＰＮ）作为阻尼材料的研究进展,分别讨论了聚氨酯（ＰＵ）／环氧树脂（ＥＰ）ＩＰＮ和ＰＵ／乙烯基聚合物ＩＰＮ的阻尼性,以及影响阻尼性能的因素,并比较了不同类型的ＰＵ ＩＰＮ的优缺点及新的可能的探讨方向。     

聚丙烯酸酯/聚苯乙烯乳胶互穿聚合物网络阻尼性能的研究

聚丙烯酸酯／聚苯乙烯乳胶互穿聚合物网络阻尼性能的研究刘瑞瑛王静媛韩庆国李玉玮汤心颐（吉林大学化学系长春１３００２３）关键词互穿聚合物网络，聚丙烯酸酯，聚苯乙烯，阻尼性能，乳胶自１９６９年Ｓｐｅｒｌｉｎｇ和Ｆｒｉｓｃｈ分别发展了ＭｉｌａｒＩＰＮ的...     

聚环氧氯丙烷氨酯阻尼材料的阻尼性能研究

<正> 一般来讲,聚合物材料的阻尼性能来源于分子链运动带来的内摩擦力以及分子间物理键的破坏与再生,分子链运动所产生的阻尼在聚合物的玻璃化转变温度范围内最为有效。因此具有极性较强、体积较大的一CH_2Cl侧基的环氧氯丙烷聚合物应具有优异的阻尼性能,专利文献[1—2]报道过由多羟基(官能度≥2)聚环氧氯丙烷预聚物为原料制得的聚氨酯泡沫具有良好的阻燃性能,作者在聚环氧氯丙烷氨酯阻尼材料方面进行了尝试。     

PMPS/PMAc相容性与同步互贯聚合物网络的阻尼性能研究

互贯聚合物网络是一种聚合物合金 ,其组分的热力学性质决定组分间的相容性和微相结构 ,从而影响材料的阻尼性能 .采用同步互贯聚合物网络 (SIN)技术制备了一种新型的聚苯基硅氧烷 (PMPS) 聚甲基丙烯酸酯 (PMAc)阻尼材料 ,用DMA和AFM等表征研究了其玻璃化温度转变行为与微观相态结构 .结果表明 ,由相容性好的组分制备的SIN材料阻尼值最高 ,tanδmax 可达 1 4,只有一个玻璃化温度转变峰 ,其微相结构为双相连续 ;组分介于相容与不相容之间时 ,所构成的SIN样品的tanδ≥ 0 3的温度区间最宽 ,可达 170℃ ,微相结构为单相连续 ;由相容性差的组分制得的SIN阻尼材料的内耗峰裂分为两个区间 .PMPS PMAcSIN材料的阻尼性能可以通过调节组分的相容性进行控制 .     

阻尼材料研究进展

对各种阻尼材料的研究进展进行了概述,内容涉及材料阻尼性能的评价方法,各种材料的阻尼机理及其影响因素,还简单介绍了先进的阻尼材料———智能阻尼材料及先进的阻尼技术———等离子真空沉积技术的研究概况。     

（甲基）丙烯酸酯及其共聚体系L′IPN的合成和性能研究Ⅱ．（甲基）丙烯酸酯及其共聚体系L′IPN的阻尼性能和力学性能

通过动态力学谱试验（ＤＭＳ）、应力－应变测量，研究了以丙烯腈、苯乙烯、醋酸乙烯酯等单体为共聚组分引入全（甲基）丙烯酸酯Ｌ′ＩＰＮ（胶乳型互穿聚合物网络）中对共混体系阻尼性能、力学性能的影响，发现通过无规共聚引进不同链结构能有效调节材料室温域的阻尼水平；初步探讨了ＩＰＮ（互穿聚合物网络）中某些组分侧链（基）结构对阻尼性能的影响规律及可能原因；本文所研究的ＩＰＮ体系在力学（物理）状态上处于皮革态，而交联密度、组分含量等对ＩＰＮ的力学性能具有较为复杂的影响。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.