A theoretical study on the inhibition efficiencies of some quinoxalines as corrosion inhibitors of copper in nitric acid

Quantum chemical calculations based on DFT method were performed on three quinoxalines compounds namely ethyl 2-(4-(2-ethoxy-2-oxoethyl)-2-p-tolylquinoxalin-1(4H)-yl)acetate (Q1), 1-[4-acetyl-2-(4-chlorophenyl)quinoxalin-1(4H)-yl]acetone (Q2) and 2-(4-methylphenyl)-1,4-dihydroquinoxaline (Q3), used as corrosion inhibitors for copper in nitric acid media to determine the relationship between the molecular structure of quinoxalines and inhibition efficiency. Quantum chemical parameters such as the highest occupied molecular orbital energy (E_HOMO), the lowest unoccupied molecular orbital energy (E_LUMO), energy gap (ΔE), dipole moment (μ), electronegativity (χ), electron affinity (A), global hardness (η), softness (σ), ionization potential (I), the fraction of electrons transferred (ΔN), and the total energy (TE), were calculated. The theoretically obtained results were found to be consistent with the experimental data reported.     

Experimental and Quantum Chemical Studies of 5-Fluoroisatin-3-(N-Cyclohexylthiosemicarbazone) and Its Metal Complexes

Abstract

Zn(II) and Ni(II) complexes of 5-fluoroisatin-3-[-(N-cyclohexylthiosemicarbazone)] (H₂FIC) have been prepared and characterized structurally by means of elemental analyses, FTIR, electronic, and ¹H NMR spectra. The theoretical wavenumbers, IR intensities, and molecular parameters have been calculated by the ab-initio Hartree–Fock (HF) method with the LanL2DZ basis set. The theoretical wavenumbers show a good agreement with experimental data. The bond lengths, bond angles, the highest occupied molecular orbital energy (E_HOMO), the lowest unoccupied molecular orbital energy (E_LUMO), the energy gap between E_HOMO and E_LUMO (ΔE_HOMO-LUMO), dipole moment, and charges on the atoms of H₂FIC as monomer form were studied by the density functional theory/Becke-3-Lee-Yang-Parr (DFT/B3LYP) and ab-initio HF methods using 6-31G(d,p) basis set. The trimeric possible structure of H₂FIC was also investigated using HF method. The observed IR wavenumbers of the H₂FIC were analyzed in the light of the computed vibrational spectra of its monomer and trimer forms.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Synthesis and evaluation of bipyrazolic derivatives as inhibitors of corrosion of C38 steel in molar hydrochloric acid

Methyl 2-(bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)amino) acetate, BT36, and methyl 2-(bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)amino)-3-(1H-indol-3-yl)propanoate, BT 43, have been synthesized. Investigation by weight-loss measurement and use of electrochemical techniques revealed the compounds are very effective inhibitors of corrosion of C38 steel in 1 M HCl solutions—percentage protection exceeded 95 % for BT43 at concentrations as low as 10^?2 M. An impedance study in the absence and presence of these compounds revealed the mechanism of protection was cathodic inhibition by polarization and charge-transfer. The Langmuir adsorption isotherm was obeyed. Quantum chemical data calculated by use of DFT at the B3LYP/6-31G* level of theory revealed a good correlation between inhibition efficiency and the molecular structure of BT36 and BT43. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, the separation energy (ΔE), and the dipole moment (μ) from the inhibitor to the metal surface explain the experimental data well.     

Theoretical approach to the corrosion inhibition efficiency of some quinoxaline derivatives of steel in acid media using the DFT method

Corrosion inhibition efficiencies of 1,4-dihydroquinoxaline-2,3-dione (Q1) and 2-phenylthieno[2,3-b]quinoxaline (Q2) as corrosion inhibitors against the corrosion of steel surface in hydrochloric acid is studied by means of density functional approach B3LYP/6-31G calculations. Quantum chemical parameters such as highest occupied molecular orbital energy (E _HOMO), lowest unoccupied molecular orbital energy (E _LUMO), energy gap (ΔE), dipole moment (μ), electronegativity (χ), electron affinity (A), global hardness (η), softness (σ), ionization potential (I), the fraction of electrons transferred (?N), the global electrophilicity ω, and the total energy were calculated. All calculations have been performed by considering density functional theory using the GAUSSIAN03W suite of programs.     

Synthesis, structure analysis and thermodynamics of [Ni(H2O)4(TO)2](NO3)2·2H2O (TO = 1,2,4-triazole-5-one)

A novel complex [Ni(H₂O)₄(TO)₂](NO₃)₂·2H₂O (TO = 1,2,4-triazole-5-one) was synthesized and structurally characterized by X-ray crystal diffraction analysis. The decomposition reaction kinetic of the complex was studied using TG-DTG. A multiple heating rate method was utilized to determine the apparent activation energy (E _a) and pre-exponential constant (A) of the former two decomposition stages, and the values are 109.2 kJ mol^?1, 10^13.80 s^?1; 108.0 kJ mol^?1, 10^23.23 s^?1, respectively. The critical temperature of thermal explosion, the entropy of activation (ΔS ^≠), enthalpy of activation (ΔH ^≠) and the free energy of activation (ΔG ^≠) of the initial two decomposition stages of the complex were also calculated. The standard enthalpy of formation of the new complex was determined as being ?1464.55 ± 1.70 kJ mol^?1 by a rotating-bomb calorimeter.     

Theoretical studies of some sulphonamides as corrosion inhibitors for mild steel in acidic medium

Density functional theory (DFT) at the B3LYP/6‐31G (d,p) and BP86/CEP‐31G* basis set levels and ab initio calculations using the RHF/6‐31G (d,p) methods were performed on four sulfonamides (namely sulfaacetamide (SAM), sulfapyridine (SPY), sulfamerazine (SMR), and sulfathiazole (STI)) used as corrosion inhibitors for mild steel in acidic medium to determine the relationship between molecular structure and their inhibition efficiencies (%IE). The order of inhibition efficiency obtained was SMR > SPY > STI > SAM which corresponded with the order of most of the calculated quantum chemical parameters namely E_HOMO (highest occupied molecular orbital energy), E_LUMO (lowest unoccupied molecular orbital energy), the energy gap (ΔE), the Mulliken charges on the C, O, N, S atoms, hardness (η), softness (S), polarizability (α), dipole moment (μ), total energy change (ΔE_T), electrophilicity (ω), electron affinity (A), ionization potential (I), the absolute electronegativity (χ), and the fraction of electrons transferred (ΔN). Quantitative structure activity relationship (QSAR) approach has been used and a correlation of the composite index of some of the quantum chemical parameters was performed to characterize the inhibition performance of the sulfonamides studied. The results showed that the %IE of the sulfonamides was closely related to some of the quantum chemical parameters but with varying degrees/order. The calculated %IE of the sulfonamides studied was found to be close to their experimental corrosion inhibition efficiencies. The experimental data obtained fits the Langmuir adsorption isotherm. The negative sign of the E_HOMO values and other thermodynamic parameters obtained indicates that the data obtained supports physical adsorption mechanism. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Theoretical Study of Substituent Effect in Aryl Group Migration in (<Emphasis Type="Italic">para</Emphasis>-C<Subscript>6</Subscript>H<Subscript>4</Subscript>X)Mn(CO)5 Complexes

In this study, we report substituent effect on aryl group migration in (para-C₆H₄X)Mn(CO)₅ complexes using mpw1pw91 quantum chemical calculations. These calculations reveal good linear relationships between barrier energy (ΔE), activation energy (ΔH^?), activation free energy (ΔG^?) values and rate constants with Hammett constants of X-substituents. The occupancy values of Mn–CO_cis and Mn–C(O)-(para-C₆H₄X) bonds in reactant, transition state and product were calculated by Natural bond orbital (NBO) method.     

Theoretical investigation of inhibition of the corrosion of A106 steel in NaCl solution by di-n-butyl bis(thiophene-2-carboxylato-O,O′)tin(IV)

This work reports results from potentiodynamic polarisation and impedance investigation, with a rotating disc electrode, of inhibition of corrosion of A106 steel in aerated, unstirred 3.0 % NaCl solutions using di-n-butyl bis(thiophene-2-carboxylato-O,O′)tin(IV) as inhibitor. These studies showed that it is a mixed-type inhibitor. Inhibition efficiency increased with increasing di-n-butyl bis(thiophene-2-carboxylato-O,O′)tin(IV) concentration and decreases with increasing solution temperature. Maximum efficiency of inhibition of the inhibitor of approximately 78 % is observed at a concentration at 10^?2 M. The inhibition process was attributed to formation of an adsorbed film on the metal surface that protects the metal against corrosive agents. The adsorption isotherm confirms the applicability of Langmuir equation to describe the adsorption process. Thermodynamic functions for the adsorption process were determined. The efficiency of corrosion inhibitors and global chemical reactivity depend on such properties as energy of the highest occupied molecular orbital (E _HOMO), energy of the lowest unoccupied molecular orbital (E _LUMO), energy gap (ΔE), which were calculated. All calculation was been performed by density functional theory (DFT) using the Gaussian03W suite of software. Calculated results were usually in agreement with the experimental data.     

On the chemical bonding features in palladium containing compounds: A combined QTAIM/DFT topological analysis

Topological analyses of the electron density on N-benzoyl-L-pheylalanine and its palladium(II) complexes are carried out using the quantum theory of atoms in molecules (QTAIM) at the M06/6-31G(d) theoretical level. The topological parameters derived from the Bader theory are also analyzed; these are characteristics of Pd bond critical points and ring critical points. The calculated structural parameters are the highest occupied molecular orbital energy (E _HOMO), the lowest unoccupied molecular orbital energy (E _LUMO), the hardness (η), the softness (S), the absolute electronegativity (χ), the electrophilicity index (ω), and the fractions of electrons transferred (ΔN) from ethylenediamine, 2,2′-bipyridine and 1,10-phenanthroline complexes to N-benzoyl-L-pheylalanine. The numerous correlations and dependences between the energy terms of the symmetry adapted perturbation theory approach, geometrical, topological, and energy parameters are detected and described.     

Syntheses and crystal structures of four new organotin complexes with Schiff bases containing triazole

Four new organotin complexes, namely [(Bu₂Sn)₂O(EtO)(L1)]₂ (1), [(Bu₂Sn)₂O(EtO)(L2)]₂ (2), [(Bu₂Sn)₂O(EtO)(L3)]₂ (3) and [Ph₃Sn(L4)] · 0.5H₂O (4), were obtained by reactions of Bu₂SnO and Ph₃SnOH with 4-phenylideneamino-3-methyl-1,2,4-triazole-5-thione (HL1), 4-furfuralideneamino-3-methyl-1,2,4-triazole-5-thione (HL2), 4-(2-thienylideneamino)-3-ethyl-1,2,4 -triazole-5-thione (HL3) and 4-(3,5-di-t-butylsalicylideneamino)-3-ethyl-1,2,4-triazole-5-thione (HL4). Compounds 1-4 were characterized by elemental analysis, IR spectra and their structures were determined by single-crystal X-ray diffraction methods. Complexes 1-3 show similar structures containing a Sn₄O₄ ladder skeleton in which each of the exo tin atoms is bonded to the N atom of a corresponding thione-form deprotonated ligand. Complex 4 shows a mononuclear structure in which the tin atom of triphenyltin group is coordinated by the S atom of a thiol-form L4⁻ anion.     

Experimental and theoretical studies on thermodynamics and properties of tautomers of 2-substituted 6(4)-methyl-1,4(1,6)-dihydropyrimidine-5-carboxylates

Experimental and theoretical studies on the thermodynamics and properties of 2-substituted 6(4)-methyl-1,4(1,6)-dihydropyrimidine-5-carboxylates were undertaken by ¹H NMR measurements and DFT (density functional theory) calculations. The ratios of tautomers a/b of dihydropyrimidines (DPs) 1, 2, and 3 were determined under various conditions to reveal the effects of temperature, solvent, and concentration on the thermodynamic data. The observed results, the free energy differences (ΔG), enthalpy differences (ΔH), and entropy differences (ΔS), are discussed in terms of the molecular structures, dipole moments (DM), and the electrostatic potential maps calculated by the DFT to clarify the nature of the DPs.     

Intramolecular cyclization of 4-amino-3-alkylsulfanyl-1,2,4-triazoles as a method for annelation of thiadiazine and thiadiazole rings

4-Amino-5-(pyridin-4-yl)-4H-1,2,4-triazole-3-thiols reacted with N-substituted isatins to give 2-oxo-3-[5-(pyridin-4-yl)-3-sulfanyl-4H-1,2,4-triazole-4-ylimino]-2,3-dihydro-1H-indoles which were treated with phenacyl bromides to obtain the corresponding S-phenacyl derivatives. The latter underwent base-catalyzed intramolecular cyclization with formation of 6,7-dihydro-5H-1,2,4-triazolo[3,4-b][1,3,4]thiadiazines spiro-fused to 2-oxo-2,3-dihydro-1H-indole fragment at C³. Analogous cyclization of 2,6-di-tert-butyl-4-[5-hetaryl-3-(2-aryl-2-oxoethylsulfanyl)-4H-1,2,4-triazole-4-ylimino]cyclohexa-2,5-dienones involved the imino nitrogen atom to produce the corresponding 6-aroyl-5-(3,5-di-tert-butyl-4-hydroxyphenyl)-3-hetaryl-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazoles.     

Synthesis and pancreatic lipase inhibitory activities of some 1,2,4-triazol-5(3)-one derivatives

In this study, starting from 4-amino-5-(4-chlorobenzyl)-2,4-dihydro-3H-1,2,4-triazole-3-one ( 1 ), the 4-Amino-5-(4-chlorobenzyl)-2-undecyl-2,4-dihydro-3H-1,2,4-triazol-3-one ( 2 ) was first synthesized and this compound was converted to Schiff base derivatives ( 3a-e ). In the second step of the study, the 2-[3-(4-chlorobenzyl)-5-oxo-1-undecyl-1,5-dihydro-4H-1,2,4-triazole-4-yl]-acetohydrazide ( 6 ), which was used as a key product in the synthesis of many heterocyclic compounds was synthesized in four steps, and then this compound was converted into methylidene acetohydrazide ( 7a-e ), thiosemicarbazide ( 8a-e ), and 1,2,4-triazole-5-thione ( 9a-e ) derivatives. Also, in the last part of the study, 1,2,4-triazole-5-thione derivatives were changed into Mannich bases ( 10a-b ) bearing a 4-phenylpiperazine ring. These new compounds were tested with regard to pancreatic lipase (PL) inhibition activity, and compound 3b , 3d , 7d , 8d , and 9d showed a considerable anti-lipase activity at various concentrations. The activity of compounds 7b (IC₅₀ = 1.45 ± 0.12 μM) was the highest in terms of IC₅₀, comparable to that of orlistat, a well-known PL inhibitor used as an antiobesity drug.     

Tautomerism of azacycles: III. Molecular and crystal structures of 3<Emphasis Type="Italic">H</Emphasis>-and 2-phenyl-1<Emphasis Type="Italic">H</Emphasis>,4<Emphasis Type="Italic">H</Emphasis>-4,5-dihydro-1,2,4-triazole-5-thiones

Compounds capable of tautomerism: sulfanyl-1,2,4-triazole, its C-phenyl derivative, and the crystal hydrate of the latter, were studied by single crystal X-ray diffraction. In the crystals they exist in the form of 3-R-1(H),4(H)-4,5-dihydro-1,2,4-triazole-5-thione with a considerable contribution of the bipolar structure. Published data on the tautomerism of sulfanyl-1,2,4-triazoles and their N-substituted analogs and on the correlation between the spectral characteristics and structures of sulfanyl-1,2,4-triazoles capable of tautomerism are discussed.     

Synthesis and reactions of 3-(3-ethoxycarbonyl-1-phenyl-1<Emphasis Type="Italic">H</Emphasis>-pyrazol-4-yl)propenic acid

The reaction of ethyl 4-formyl-1-phenyl-1H-pyrazole-3-carboxylate with the malonic acid led to the formation (2E)-3-(3-ethoxycarbonyl-1-phenyl-1H-pyrazol-4-yl)propenic acid. In reactions of this acid chloride with 4-amino-5-aryl(hetaryl)-4H-1,2,4-triazole-3-thiols were obtained ethyl 4-[(E)-2-{3-aryl(hetaryl)[1,2,4]triazolo[3,4-b][1,3,4]thiadiazol-6-yl}ethenyl]-1-phenyl-1H-pyrazoe-3-carboxylates, with 5-aryltetrazoles, ethyl 4-[(E)-2-(5-aryl-1,3,4-oxadiazol-2-yl)-ethenyl]-1-phenyl-1H-pyrazole-3-carboxylates, with 1-(2-hydroxy-3,5-dimethylphenyl) followed by the Baker-Venkataraman rearrangement and the cyclization, ethyl 4-[(E)-2-(6,8-dimethyl-4-oxo-4Hchromen-2-yl)ethenyl]-1-phenyl-1H-pyrazole-3-carboxylate.     

DFT Study for a Series of Less-Symmetrical Crown Ethers and Their Complexes with Alkali Metal Cations

A series of ring‐contracted (14‐crown‐5, 17‐crown‐6) and ring‐enlarged (16‐crown‐5, 17‐crown‐5, 19‐crown‐6, 20‐crown‐6) crown ethers and their complexes with alkali‐metal cations Na⁺ and K⁺ had been explored using density functional theory (DFT) at B3LYP/6‐31G* level in order to reveal the effects of the methylene‐chain length in a crown ether. The nucleophilicity of all crown ethers had been investigated by the Fukui functions. The quantum chemistry parameters, such as the energy gap (ΔE), the highest occupied molecular orbital energy (E_HOMO) and the lowest unoccupied molecular orbital energy (E_LUMO) for less‐symmetrical crown ethers and symmetrical frameworks (15‐crown‐5, 18‐crown‐6) had been calculated. In addition, the thermodynamic energies of complexation reactions had also been studied. The results of the DFT calculations show that the methylene‐chain length plays an important role in determining the structure characters of the crown ethers and also strongly influences the properties of the ethers. Some of the calculated results are in a good agreement with the experimental values.     

Non-catalyzed addition of heterocyclic thiols and 5-substituted-1H-tetrazoles to vinyl ethers

The alkylation of 1-substituted 1H-tetrazole-5-thiols and 4-substituted 4 H-1,2,4-triazole-3-thiols with alkyl halides or sulfonates lead to the formation of S-alkylated products regardless of the substituent on the heterocycle. In this work, we found that substituted 1H-tetrazole-5-thiols and 4 H-1,2,4-triazole-3-thiols readily reacted with vinyl ethers in the absence of a catalyst to exclusively form N-substituted 1H-tetrazole-5(4H)-thiones and 1H-1,2,4-triazole-5(4H)-thiones, respectively. Furthermore, the reactions of 5-substituted-1H-tetrazoles with vinyl ethers under the same conditions selectively yielded 2,5-disubstitued tetrazoles.     

Quantum chemical studies on some thiadiazolines as corrosion inhibitors for mild steel in acidic medium

Density functional theory at the B3LYP/6-31G(d,p) basis set level was performed on three thiadiazolines, namely 4-chloro-N-(5-phenyl-1,3,4-thiadiazol-2(3H)-ylidene)aniline (TD01), 4-chloro-N-(5-(4-methoxyphenyl)-1,3,4-thiadiazol-2(3H)-ylidene)aniline (TD02), and 2-(5-(4-chlorophenylimino)-4,5-dihydro-1,3,4-thiadiazol-2-yl) phenol (TD03), and the inhibitive effect of these thiadiazolines against the corrosion of mild steel in acidic medium is elucidated. The calculated quantum chemical parameters correlated to the inhibition efficiency are E_HOMO (highest occupied molecular orbital energy), E_LUMO (lowest unoccupied molecular orbital energy), the energy gap (ΔE) hardness (η), softness (S), dipole moment (μ), electron affinity (EA) ionization potential (IE), the absolute electro negativity (χ), and the fraction of electron transferred (ΔN). The decreasing order of %IE of the thiadiazolines studied was found to be in agreement with experimental corrosion inhibition efficiencies. The local reactivity has been analyzed through the condensed Fukui function and local softness indices using population analysis.     

Photochemical synthesis of triazolo[3,4-b]-1,3(4H)-benzothiazines: a detailed mechanistic study on photocyclization/photodesulfurisation of triazole-3-thiones

Irradiation of 4-(2-halobenzyl)-5-substituted-1,2,4-triazole-3-thiones under base mediated (CH₃CN/2 M NaOH) condition afforded triazolo[3,4-b]-1,3(4H)-benzothiazines and desulfurized triazoles. Benzophenone sensitized photolysis of triazole-3-thiones gave desulfurized triazoles exclusively. The mechanism of the photocyclization/photodesulfurization and the involvement of singlet and triplet energy levels are discussed.     

Electroanalytical studies of the corrosion-protection properties of 4-amino-4H-1,2,4-triazole-3,5-dimethanol (ATD) on mild steel in 0.5?N sulfuric acid

Inhibition of the corrosion of mild steel in aerated 0.5?N H₂SO₄ solution by 4-amino-4H-1,2,4-triazole-3,5-dimethanol (ATD) was investigated by use of potentiodynamic polarization (Tafel), electrochemical impedance spectroscopy, adsorption, and surface morphological studies. The effects on the rate of corrosion of inhibitor concentration, temperature, extent of surface coverage, adsorption kinetics, and surface morphology were investigated. Inhibition efficiency increased markedly with increasing ATD concentration and decreased slightly with increasing temperature. The presence of ATD reduced the capacitance of the double layer and increased the charge-transfer resistance. Values of the activation energy (E _a) and of the thermodynamic data adsorption equilibrium constant (K _ads) and free energy of adsorption (??G _ads) were computed from the temperature dependence of the corrosion current. The inhibitor molecule first became adsorbed on the mild steel surface, obeying the Langmuir adsorption isotherm, and substantially reduced the rate of corrosion. Results of electroanalytical studies revealed that ATD acts as a mixed-type inhibitor.