Study of dielectric and magnetic properties of PbZr0.52Ti0.48O3-Mn0.3Co0.6Zn0.4Fe1.7O4 composite

Results of detailed structural, dielectric, magnetic and magnetoelectric studies of (x)PbZr_0.52Ti_0.48O₃-(1−x)Mn_0.3Co_0.6Zn_0.4Fe_1.7O₄ composites where x=65, 70, 75 and 80 are shown in this work. Manganese substituted cobalt ferrites are known to exhibit large strain derivative (dx/dH) and on the other hand substitution of Zn in pure cobalt ferrite is known to enhance its permeability μ and permittivity ε. The choice of ferrite as Mn, Zn simultaneously substituted cobalt ferrite (MCZFO) is made keeping in view that for good magnetoelectric (ME) voltage coefficient the magnetostrictive constituent phase of the composite should have large strain derivative (dx/dH) along with large permittivity and permeability. It is shown here that although the dielectric transition temperature changes significantly with change in the mole ratio of the two component phases, magnetic transition temperature (much less compared to the bulk cobalt ferrite) is relatively non-responsive to the changing molar ratio of the two component phases. In the vicinity of the magnetic transition temperature we observed an anomaly in tan δ vs. T plots, which indicates a possible magnetoelectric coupling in the samples. Magnetoelectric voltage coefficient (α_E) has been measured using static magnetoelectric method. Highest magnetoelectric voltage coefficient (α_E=0.312 mV/cmOe) is obtained for sample 80:20 at H_DC=1000 Oe.     

Magnetic and microwave absorption properties of BaFe12−x (Mn0.5Cu0.5Zr)x/2O19 synthesized by sol–gel processing

BaFe_12−x (Mn_0.5Cu_0.5Zr)_x/2O₁₉ hexaferrites with x=1, 2 and 3 were prepared by sol–gel process. The ferrite powders possess hexagonal shape and are well separated from one another. The powders of these ferrites were mixed with polyvinylchloride (PVC) plasticizer to be converted into a microwave absorbing composite ferrite with a thickness of 1.8 mm. X-ray diffractometer (XRD), scanning electron microscope (SEM), ac susceptometer, vibrating sample magnetometer and vector network analyzer were used to analyze its structure, electromagnetic and microwave absorption properties. The results showed that magnetoplumbite structures for all samples were formed. The sample with higher magnetic susceptibility and coercivity exhibits a larger microwave absorbing ability. Also the present investigation demonstrates that a microwave absorber using BaFe_12−x(Mn_0.5Cu_0.5Zr)_x/2O₁₉ (x=2 and 3)/PVC with a matching thickness of 1.8 mm can be fabricated for applications over 15 GHz, with reflection loss more than −25 dB for specific frequencies, by controlling the molar ratio of the substituted ions.     

Studies on the activation energy from the ac conductivity measurements of rubber ferrite composites containing manganese zinc ferrite

Manganese zinc ferrites (MZF) have resistivities between 0.01 and 10 Ω m. Making composite materials of ferrites with either natural rubber or plastics will modify the electrical properties of ferrites. The moldability and flexibility of these composites find wide use in industrial and other scientific applications. Mixed ferrites belonging to the series Mn_(1−x)Zn_xFe₂O₄ were synthesized for different ‘x’ values in steps of 0.2, and incorporated in natural rubber matrix (RFC). From the dielectric measurements of the ceramic manganese zinc ferrite and rubber ferrite composites, ac conductivity and activation energy were evaluated. A program was developed with the aid of the LabVIEW package to automate the measurements. The ac conductivity of RFC was then correlated with that of the magnetic filler and matrix by a mixture equation which helps to tailor properties of these composites.     

The influence of Zn ions substitution on the transport properties of Mg-ferrite

The thermoelectric power and electrical conductivity measurements of Zn-substituted Mg-ferrites having the general formula Mg_1−xZn_xFe₂O₄ (where x=0, 0.2, 0.4 and 0.6) were carried out from room temperature to 773 K. The Seebeck coefficient is positive for all the compositions showing that these ferrites behave as p-type semiconductors and the majority charge carriers are holes. The temperature variation of the Seebeck coefficient is also discussed. The Fermi energy (E_F); the density of charge carriers (n) and the carriers mobility (μ) were determined for the studied system. The variation of log σ with reciprocal of temperature shows a discontinuity at Curie temperature. The DC electrical conductivity increases with increasing temperature ensuring the semiconducting nature of the samples. The Curie temperature determined from DC electrical conductivity was found in satisfactory agreement with that determined from initial magnetic permeability measurements. This transition temperature is found to decrease with increasing Zn concentration. The activation energy in the paramagnetic region is found to be lower than that in ferrimagnetic region. The variation of room temperature conductivity with composition indicates that conductivity increases with increasing Zn content. The dependence of the electrical conductivity of Mg-Zn ferrite on Zn content is explained on the basis of the cation distribution.     

Enhancement of microstructure and initial permeability due to Cu substitution in Ni0.50−xCuxZn0.50Fe2O4 ferrites

Structural and magnetic properties of Cu substituted Ni_0.50−xCu_xZn_0.50Fe₂O₄ ferrites (where x=0.0-0.25) prepared by an auto combustion method have been investigated. The X-ray diffraction patterns of these compositions confirmed the formation of the single phase spinel structure. The lattice parameter increases with the increase in Cu²⁺ content obeying Vegard's law. The particle size of the starting powder compositions varied from 22 to 72 nm. The theoretical density increases with increase in copper content whereas the Néel temperature decreases. The bulk density, grain size and permeability increases up to a certain level of Cu²⁺ substitution, beyond that all these properties decrease with increase in Cu²⁺ content. The bulk density increases with increase in sintering temperatures up to 1250 °C for the parent composition, while for substituted compositions it increases up to 1200 °C. Due to substitution of Cu²⁺, the real part of the initial permeability increases from 97 to ∼390 for the sample sintered at 1100 °C and from 450 to 920 for the sample sintered at 1300 °C. The ferrites with higher initial permeability have a relatively lower resonance frequency, which obey Snoek's law. The initial permeability strongly depends on average grain size and intragranular porosity. The saturation magnetization, M_s, and the number of Bohr magneton, n(μ_B)_, decreases up to x=0.15 due to the reduction of the A-B interaction in the AB₂O₄ spinel type ferrites. Beyond that value of x, the M_s and the n(μ_B) values are enhanced. The substitution of Cu²⁺ influences the magnetic parameters due to modification of the cation distribution.     

A.C. and D.C. conductivity of NiZn ferrite nanoparticles in wet and dry conditions

Promising future applications of ferrite nanoparticles in medicine, drug delivery, sensors and ferrofluids are expected to be in wet or humid environments. Therefore nanostructured powders of ferrites having the chemical compositions.Ni_xZn _(1−x)Fe₂O₄ with (x=0.0, 0.25, 0.5, 0.75, and 1) were pressed immediately after preparation - by the co-precipitation method - without any drying to simulate a humid environment. The nanoparticles were characterized by X-ray diffraction analysis (XRD) to be sure of the formation of the ferrite in nanoscale. The infrared (IR) spectroscopy of the samples ensures the existence of water as well as the characteristic absorption bands of ferrites. The ac and dc conductivity of the samples had been investigated immediately after preparation (the as-prepared samples). Then, the samples were dried at 200 °C for about 12 h and reinvestigated. The behavior of conductivity differs significantly in the two cases showing a noticeable effect due to humidity. Also, the magnetic induction of the as-prepared samples was investigated by using the vibrating sample magnetometer (VSM). The samples show superparamagnetic behavior.     

Reentrant spin glass behavior and large initial permeability of Co0.5−xMnxZn0.5Fe2O4

A series of polycrystalline ferrites having nominal chemical composition Co_0.50−xMn_xZn_0.5Fe₂O₄ (0<x<0.4) have been synthesized by the solid-state reaction technique. The XRD analysis confirms single phase cubic spinel structure for all compositions. Lattice constant increases from 0.84195 to 0.84429 nm with the increasing Mn content and obeys Vegard's law. The average grain size increases by increasing both Mn content and sintering temperatures. Room temperature saturation magnetization increases for x=0.1 and decreases for increasing Mn content. The coercivity decreases with increasing Mn content due to the decrease of anisotropy constant. A reentrant spin glass behavior of these samples is observed from the zero field cooled magnetization measurements. The real part of the initial permeability increases by increasing both Mn content and sintering temperatures. This is due to the homogeneous grain growth and densification of the ferrites. The highest initial permeability 137 is observed for x=0.4 sintered at 1573 K on the other hand, the highest relative quality factor (2522) is obtained for the sample Co_0.2Mn_0.3Zn_0.5Fe₂O₄ sintered at 1523 K. The Mn substituted Co_0.50−xMn_xZn_0.5Fe₂O₄ ferrites showed improved magnetic properties.     

Electromagnetic and microwave absorbing properties of Co2Z-type hexaferrites doped with La

Z-type ferrites doped with La³⁺, Ba_3−xLa_xCo₂Fe₂₄O₄₁ (x=0.00-0.30), were prepared by sol-gel method. The effect of the substitution La³⁺ rare-earth ions for Ba²⁺ ions on the microstructure, complex permeability, permittivity and microwave absorption of the samples was investigated. The results show that the major phase of the ferrites changed to Z-phase when sintering temperature was 1250 °C for 5 h. With the increase of the substitution ratio of La³⁺ ions from 0.0 to 0.3, the lattice parameters a and c increased gradually, which resulted in the change of the particle shape and size. The data of magnetism showed that the addition of La³⁺ ions make the ferrite a better soft magnetic material due to increase of magnetization (σ_s) and decrease of coercivity (H_c). The La³⁺ ions doped in the ferrite not only improved complex permeability and complex permittivity, but also microwave absorbency.     

Structural and magnetic properties of MnxCo1−xFe2O4 ferrite nanoparticles

We report on the structural and magnetic properties of nanoparticles of Mn_xCo_1−xFe₂O₄ (x=0.1, 0.5) ferrites produced by the glycothermal reaction. From the analysis of XRD spectra and TEM micrographs, particle sizes of the samples have been found to be about 8 nm (for x=0.1) and 13 nm (for x=0.5). The samples were characterized by DC magnetization in the temperature range 5-380 K and in magnetic fields of up to 40 kOe using a SQUID magnetometer. Mössbauer spectroscopy results show that the sample with higher Mn content has enhanced hyperfine fields after thermal annealing at 700 °C. There is a corresponding small reduction in hyperfine fields for the sample with lower Mn content. The variations of saturation magnetization, remnant magnetization and coercive fields as functions of temperature are also presented. Our results show evidence of superparamagnetic behaviour associated with the nanosized particles. Particle sizes appear to be critical in explaining the observed properties.     

High heat generation ability in AC magnetic field for nano-sized magnetic Y3Fe5O12 powder prepared by bead milling

Nano-sized magnetic Y₃Fe₅O₁₂ ferrite having a high heat generation ability in an AC magnetic field was prepared by bead milling. A commercial powder sample (non-milled sample) of ca. 2.9 μm in particle size did not show any temperature enhancement in the AC magnetic field. The heat generation ability in the AC magnetic field improved with a decrease in the average crystallite size for the bead-milled Y₃Fe₅O₁₂ ferrites. The highest heat ability in the AC magnetic field was for the fine Y₃Fe₅O₁₂ powder with a 15-nm crystallite size (the samples were milled for 4 h using 0.1 mm? beads). The heat generation ability of the excessively milled Y₃Fe₅O₁₂ samples decreased. The main reason for the high heat generation property of the milled samples was ascribed to an increase in the Néel relaxation of the superparamagnetic material. The heat generation ability was not influenced by the concentration of the ferrite powder. For the samples milled for 4 h using 0.1 mm? beads, the heat generation ability (W g⁻¹) was estimated using a 3.58×10⁻⁴ fH² frequency (f/kHz) and the magnetic field (H/kA m⁻¹), which is the highest reported value of superparamagnetic materials.     

Preparation and magnetic properties of La-substituted Zn–Cu–Cr ferrites via a rheological phase reaction method

Nanocrystalline La-substituted Zn–Cu–Cr ferrites Zn_0.6Cu_0.4Cr_0.5La_xFe_1.5−xO₄ (x=0.00, 0.02, 0.04, 0.06) were prepared by a rheological phase reaction method. The obtained powders were characterized by X-ray diffractometer, transmission electron microscopy and vibrating sample magnetometer. Permeability of the samples was investigated using an impedance analyzer. The results indicated that ferrite samples had the single spinel phase at low La content. Lattice parameter increased with increasing La content, while particle size calculated from Scherrer's formula decreased with increasing La content in La-substituted ferrite samples. The magnetic properties of La-substituted ferrites were strongly affected by La content. The saturation magnetization decreased, while coercivity increased with increasing La content. The variation of real permeability with La content was investigated in the frequency range of 1 MHz–1 GHz.     

Low temperature synthesis of Mn0.4Zn0.6In0.5Fe1.5O4 nanoferrite for high-frequency applications

In the present study, nanoferrite of composition Mn_0.4Zn_0.6In_0.5Fe_1.5O₄ has been synthesized by co-precipitation method. Decomposition of residue at a temperature as low as 200 °C gives the ferrite powder. The ferrite has been, finally, sintered at 500 °C. The structural studies have been made by using X-ray diffraction (XRD) technique and scanning electron microscopy (SEM), which confirm the formation of single spinel phase and nanostructure. The dc resistivity is studied as a function of temperature and values found are more than twice those for the samples prepared by the other chemical methods. It is found that the resistivity decreases with increase in temperature. The initial permeability value is found to be higher as compared to the other chemical routes. The initial permeability value is found to increase with increase in temperature. At a certain temperature called Curie temperature, it attains a maximum value, after which the initial permeability decreases sharply. Even at nanolevel, appreciable value of initial permeability is obtained and low magnetic losses make these ferrites especially suitable for high-frequency applications. The particle size is calculated using Scherrer's equation for Lorentzian peak, which comes out between 35 and 49 nm. Possible mechanisms contributing to these processes have been discussed.     

Magnetic properties of nano-crystalline Gd- or Pr-substituted CoFe2O4 synthesized by the citrate precursor technique

The magnetic properties of nano-crystalline CoM_xFe_2−xO₄ (where M=Gd and Pr and x=0, 0.1 and 0.2) powders prepared by a citrate precursor technique have been studied by using vibrating sample magnetometer (VSM). The crystallite sizes of the materials were varied by altering the synthetic conditions and are within the range of a minimum of 6.8 nm and a maximum of 87.5 nm. The materials were characterized by powder X-ray diffraction (XRD) and thermogravimetric (TG) measurements. TG study indicates the formation of the spinel ferrite phase at 220°C. The phase identification of the materials by XRD reveals the single-phase nature of the materials. The room temperature saturation magnetization of the ferrite materials decreases with the reduction of size. This has been attributed to the presence of superparamagnetic fractions in the materials and spin canting at the surface of nano-particles. Insertion of rare-earth atoms in the crystal lattice inhibits the grain growth of the materials in a systematic manner compared with that of the pure cobalt ferrite materials. The improved coercivity compared with those for the pure cobalt ferrites is attributed to the contribution from the single ion anisotropy of the rare-earth ions present in the crystal lattice and the surface effects resulting in alteration of magnetic structures on the surface of nano-particles.     

Li0.5Fe2.5−xMnxO4 ferrite sintered from microwave-induced combustion

Li_0.5Fe_2.5−xMn_xO₄ (0≦x≦1.0) powders with small and uniformly sized particles were successfully synthesized by microwave-induced combustion, using lithium nitrate, ferric nitrate, manganese nitrate and carbohydrazide as the starting materials. The process takes only a few minutes to obtain as-received Mn-substituted lithium ferrite powders. The resultant powders annealed at 650 ^°C for 2 h and were investigated by thermogravimeter/differential thermal analyzer (TG/DTA), X-ray diffractometer (XRD), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and thermomagnetic analysis (TMA). The results revealed that the Mn content were strongly influenced the magnetic properties and Curie temperature of Mn-substituted lithium ferrite powder. As for sintered Li_0.5Fe_2.5−xMn_xO₄ specimens, substituting an appropriate amount of Mn for Fe in the Li_0.5Fe_2.5−xMn_xO₄ specimens markedly improved the complex permeability and loss tangent.     

Synthesis and characterizations of microwave sintered ferrite powders and their composite films for practical applications

Phase pure single phase ferrite powders of (Ni_xR_1−x)_0.5Zn_0.5Fe₂O₄ (R=Mn, Co, Cu; x=0, 0.5) were manufactured using microwave sintering at 930 °C for 10 min in air atmosphere. The powders were characterized for their structure, microstructure, thermal, and magnetic properties. Selected powders were used as fillers to prepare their composite films using polymethyl methacrylate polymers as matrix. The composite films were prepared using the melt blending approach and were tested for their microstructure, thermal, and magnetic hysteresis loop as well as 3D magnetic field space mappings using an electromagnetic compatibility scanner. Among the studied ferrites, cobalt doped ferrites and their composites showed the best electromagnetic interference (EMI) shielding effectiveness value and have potential for practical EMI shielding applications.     

Investigation of flux pinning properties of YBCO:BaZrO3 composite superconductor from temperature dependent magnetization studies

Magnetization studies of YBCO:BaZrO₃ composite superconductor have been done over a wide range of temperature and applied magnetic field using MPMS SQUID VSM and the results are compared with that of pure YBCO. The analysis of the observed results indicate that there is considerable improvement in the values of critical current density (J_C) and pinning force density (F_p) of YBCO:BaZrO₃ composite samples as compared to pure YBCO sample in the entire investigated range of applied magnetic field and temperatures ranging from 4 to 77 K. The variation of J_C with reduced temperature t (=T/T_C) for the composite samples has been found to be similar to that of pure YBCO sample indicating similar nature of the vortex interaction with pinning centres in both pure and composite samples. The enhancement in the value of J_C and F_p in the composite samples as compared to pure YBCO sample has been attributed to the increased defect density in the composite samples due to the presence of BZO particles in YBCO matrix.     

Influence of Sm-substitution on structure and electromagnetic properties of Ba3−xSmxCo2Fe24O41 powders

Sm-substituted barium hexaferrites, Ba_3−xSm_xCo₂Fe₂₄O₄₁ (x=0-0.25), were prepared by a conventional ceramic sintering method. The microstructure, complex permittivity, complex permeability and static magnetic properties of the samples were studied using powder X-ray diffraction, field emission scanning electron microscopy, vector network analyzer and vibrating sample magnetometry. The results reveal that by introducing a relatively small amount of Sm³⁺ instead of Ba²⁺ an important modification of both structure and high-frequency electromagnetic properties can be obtained. Doping of Sm³⁺ suppressed the grain growth and gave rise to a decrease of the grain size. As the Sm content increases, the static magnetic properties continuously increase. The real part and imaginary part of complex permittivity initially increase with Sm content, and then decreases when x>0.10. The imaginary part of complex permeability decreases after Sm³⁺ is doped. There is no obvious change in the real part of the complex permeability for different Sm contents. The reasons are discussed using electromagnetic theory.     

Zn- and Cu-substituted Co2Y hexagonal ferrites: Sintering behavior and permeability

Y-type polycrystalline hexagonal ferrites Ba₂Co_2−x−yZn_xCu_yFe₁₂O₂₂ with 0≤x≤2 and 0≤y≤0.8 were prepared by the mixed-oxide route. Single phase Y-type ferrite powders were obtained after calcinations at 1000 °C. Samples sintered at 1200 °C show a permeability that increases with the substitution of Zn for Co and display maximum permeability of μ′=35 at 1 MHz for x=1.6 and y=0.4. A resonance frequency f_r=500 MHz is observed for Zn-rich ferrites with y=0 and 0.4. The saturation magnetization increases with substitution of Zn for Co. Addition of Bi₂O₃ shifts the temperature of maximum shrinkage down to T≤950 °C. Moreover, an increase of the Cu-concentration further lowers the sintering temperature to T≤900 °C, enabling co-firing of the ferrites with Ag metallization for multilayer technologies. However, low-temperature firing reduces the permeability to μ′=10 and the resonance frequency is shifted to 1 GHz. Thus substituted hexagonal Y-type ferrites can be used as soft magnetic materials for multilayer inductors for high frequency applications.     

Effect of Zn and Mg doping on structural,dielectric and magnetic properties of tetragonal CuFe2O4

The Cu_1?xA_xFe₂O₄ (A = Zn, Mg; x = 0.0, 0.5) ferrites were successfully synthesized by chemical co-precipitation method. X-ray diffraction and Raman spectroscopy reveals that all the ferrite samples are in single-phase with tetragonal structure for CFO and cubic spinel structure for CZFO and CMFO samples. SEM micrograph shows the variation of grain size with Zn and Mg doping in parent CFO sample. Frequency dependent dielectric response confirms the dielectric polarization and electrical conduction mechanism in the present series with a maximum value of dielectric constant and loss tangent for CZFO sample. The anomaly ～493 K in temperature dependent dielectric constant and dielectric loss is assigned to tetragonal to cubic phase transition in CFO sample. The magnetic measurement explored that the saturation value (M_s) is maximum for CZFO as compared to CFO and CMFO ferrites samples.     

Influence of copper cations on the magnetic properties of NiCuZn ferrite nanoparticles

Ni_0.6−xCu_xZn_0.4Fe₂O₄ (x=0-0.5) ferrite nanoparticles were prepared, employing a reverse micelle process. X-ray diffraction and transmission electron microscopy evaluations demonstrated that single phase spinel ferrites with narrow size distribution were obtained. Vibrating sample magnetometer was employed to probe the magnetic properties of the samples. It was found that with an increase in copper content, the saturation magnetization decreases. Magnetic dynamics of the samples was studied by measuring a.c. magnetic susceptibility versus temperature at different frequencies. The phenomenological Néel-Brown and Vogel-Fulcher models were employed to distinguish between the interacting or non-interacting systems. The system exhibits that there is strong interaction among fine particles.