Kinetic determinations of accurate relative oxidation potentials of amines with reactive radical cations

Accurate oxidation potentials for organic compounds are critical for the evaluation of thermodynamic and kinetic properties of their radical cations. Except when using a specialized apparatus, electrochemical oxidation of molecules with reactive radical cations is usually an irreversible process, providing peak potentials, E(p), rather than thermodynamically meaningful oxidation potentials, E(ox). In a previous study on amines with radical cations that underwent rapid decarboxylation, we estimated E(ox) by correcting the E(p) from cyclic voltammetry with rate constants for decarboxylation obtained using laser flash photolysis. Here we use redox equilibration experiments to determine accurate relative oxidation potentials for the same amines. We also describe an extension of these experiments to show how relative oxidation potentials can be obtained in the absence of equilibrium, from a complete kinetic analysis of the reversible redox kinetics. The results provide support for the previous cyclic voltammetry/laser flash photolysis method for determining oxidation potentials.     

Determination of HMO parameters with MS-Xα-SCF method

A technique for determining the HMO parameters with MS-Xα-SCF method has been developed. The ionization potentials of even polyenes and condensed benzene compounds have been calculated. The average deviation from the existent experimental values is 0.34 eV.     

Special Features of the Electrochemical Oxidation of Substituted 4-Carboxy-1,4-dihydropyridines

Electrochemical oxidation potentials of 1,4-dihydropyridines substituted with 4-COOH, 4-COOR, and 4-CONRR' groups have been determined in aprotic acetonitrile by the rotating ring-disk electrode method (RRDE). The electrochemical reduction potentials of the resulting products were also determined at the ring electrode. It was established that protonated pyridines are formed in the oxidation of derivatives with and without a substituent in position 4 of the heterocycle. In the case of 4-alkoxycarbonyl substituted compounds the substituent at position 4 is generally retained. 1,4-Dihydrogenated derivatives of isonicotinic acid as a rule loose the substituent at position 4 on oxidation, and both types of product were recorded for the corresponding 4-carbamoyl derivatives. The substituent at position 9 of the heterocycle was mainly retained on electrochemical oxidation of the 3,3,6,6-tetramethyl-1,8-dioxo-1,2,3,4,5,6,7,8,9,10-decahydroacridine derivatives studi! ed.     

Electrochemical oxidation of substituted 3,4-dihydro-2-pyridones at a rotating graphite electrode with a ring

Using the method of a rotating disk (graphite) electrode with a ring, UV spectroscopy, and prolonged electrolysis, it has been shown that the first stage of the electrochemical oxidation of substituted 3,4-dihydro-2-pyridones in anhydrous acetonitrile corresponds to a two-electron process taking place by an ECE mechanism and leads to the formation of the corresponding substituted 2-pyridones. The potentials of the electrochemical oxidation of the 3-cyano and 3-carbamoyl derivatives of the reduced forms and the potentials of the electroreduction of the corresponding oxidized compounds have been determined.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 87–91, January, 1984.     

Combination of MOMM and VEH methods to calculate electronic properties of polymers

A Molecular-Orbital-Based Molecular Mechanics method (MOMM) has been employed to calculate the structures of cyclopentadiene, pyrrole, furan, thiophene, dibenzocyclopentadiene (fluorene), dibenzopyrrole, dibenzofuran, and dibenzothiophene. The dimer structures of the above compounds have also been calculated using the same method to derive the unit cells of polycyclopentadiene, polypyrrole, polyfuran, polythiophene, polydibenzocyclopentadiene, polydibenzopyrrole, polydibenzofuran, and polydibenzothiophene. The band structures, densities of states, ionization potentials, band gaps, reduction potentials, and oxidation potentials of these polymers then have been calculated by using the Valence Effective Hamiltonian method (VEH). The structural effects on electronic properties are discussed.     

A study of the initial act of the oxidation of Lignin and compounds modeling it

The initial stage of the oxidation of lignin and of compounds modeling it has been studied by differential oscillographic voltammetry. The half-wave oxidation potentials of the compounds are given, and it is shown that the phenoxyl radicals formed are extremely unstable and take part immediately in subsequent chemical reactions.     

Redox potentials of trifluoromethyl-containing compounds

Trifluoromethylation reactions are important transformations in the research and development of drugs, agrochemicals and functional materials. An oxidation/reduction process of trifluoromethyl-containing compounds is thought to be involved in many recently tested catalytic trifluoromethylation reactions. To provide helpful physical chemical data for mechanistic studies on trifluoromethylation reactions, the redox potentials of a variety of trifluoromethyl-containing compounds and trifluoromethylated radicals were studied by quantum-chemical methods. First, wB97X-D was found to be a reliable method in predicting the ionization potentials, electron affinities, bond dissociation enthalpies and redox potentials of trifluoromethyl-containing compounds. One-electron absolute redox potentials of 79 trifluoromethyl substrates and 107 trifluoromethylated radicals in acetonitrile were then calculated with this method. The theoretical results were found to be helpful for interpreting experimental observations such as the relative reaction efficiency of different trifluoromethylation reagents. Finally, the bond dissociation free energies (BDFE) of various compounds were found to have a good linear relationship with the related bond dissociation enthalpies (BDE). Based on this observation, a convenient method was proposed to predict one-electron redox potentials of neutral molecules.     

Die elektrochemische oxidation aliphatischer nitroxyl-radikale

The electrochemical oxidation of seven different nitroxyl radicals has been investigated in acetonitrile at a platinum electrode. Cyclic and bicyclic nitroxyls are oxidized in a reversible one-electron-step to the corresponding oxammonium ions. From oxidation and ionization potentials the electrostatic solvation enthalpies of two oxammonium ions were calculated. The ionization potentials of the remaining compounds could be estimated. Heterogenous rate constants of the electrode reaction have been determined.     

Volt-amperometry of 1,4-dihydropyridine derivatives

It was found that compounds of the 3,5-dicarbonyl-1,4-dihydropyridine series are oxidized on a rotating platinum microelectrode in acetonitrile at potentials that are accessible for electrochemical investigation (from 0.8 to 1.4 V relative to a saturated calomel electrode). The electrochemical oxidation potentials of 41 compounds were determined, and the influence of electronic effects of substituents introduced into various positions of the dihydropyridine ring on E_p and E_1/2 was revealed. The potentials obtained were compared with the peculiarities of the chemical and enzymatic oxidation of-the corresponding compounds.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 84–87, January, 1972.     

Theoretical study of ionization and one‐electron oxidation potentials of N‐heterocyclic compounds

A number of density functionals was utilized to predict gas‐phase adiabatic ionization potentials (IPs) for nitrogen‐rich heterocyclic compounds. Various solvation models were applied to the calculation of difference in free energies of solvation of oxidized and reduced forms of heterocyclic compounds in acetonitrile (AN) for correct reproduction of their standard oxidation potentials. We developed generally applicable protocols that could successfully predict the gas‐phase adiabatic ionization potentials of nitrogen‐rich heterocyclic compounds and their standard oxidation potentials in AN. This approach is supported by a MPW1K/6‐31+G(d) level of theory which uses SMD(UA0) approximation for estimation of solvation energy of neutral molecules and PCM(UA0) model for ionized ones. The mean absolute derivation (MAD) and root mean square error (RMSE) of the current theoretical models for IP are equal to 0.22 V and 0.26, respectively, and for oxidation potentials MAD = 0.13 V and RMSE = 0.17. © 2013 Wiley Periodicals, Inc.     

Mechanistic Investigation of the Oxidative Cleavage of the Carbon–Carbon Double Bond in α,β‐Unsaturated Compounds by Hexachloroiridate(IV) in Acetate Buffer

The hexachloroiridate(IV) oxidation of α,β‐unsaturated compounds such as acrylic acid, acrylamide, and acrylonitrile (CH₂=CHX; X = –COOH, –CONH₂, and –CN) was carried out in NaOAc‐AcOH buffer medium. The reaction follows complex kinetics, being first order in [Ir^IV] and complex order in [CH₂=CHX]. H⁺ ion has no effect on the reaction rate in the pH range 3.42–4.63. The pseudo–first‐order rate constant decreases with a decrease in the dielectric constant and with a decrease of ionic strength of the medium. The oxidation rate follows the sequence: acrylonitrile > acrylamide > acrylic acid. A mechanism is proposed involving the formation of an unstable intermediate complex between the substrate and the oxidant which is transformed to the radical cation in a slow rate‐determining step with the concomitant reduction of Ir(IV) to Ir(III). The radical cation subsequently decomposes to the aldehyde that appears as the ultimate product of the carbon–carbon double bond cleavage. The major product of oxidation was identified as HCHO by ¹H NMR. Activation parameters for the slow rate‐determining step and thermodynamic parameters associated with the equilibrium step of the proposed mechanism have been evaluated. The enthalpy of activation is linearly related to the entropy of activation, and this linear relationship confirms that the oxidation of all the α,β‐unsaturated compounds follows a common mechanism.     

(Photo)electrochemical behavior of selected organic compounds on TiO2 electrodes. Overall relevance to heterogeneous photocatalysis

Oxidation potentials of resorcinol, 4-chlororesorcinol, 4,6-dichlororesorcinol, catechol, 3,4-dihydroxybenzoic acid and 1,2,4-trihydroxybenzene were measured on particulate TiO₂ (Degussa P-25) thin films, immobilized on optically transparent SnO₂ conducting glass electrodes, by cyclic voltammetry in 0.5M KCl aqueous electrolyte solutions. The effect of adsorption on oxidation potentials was examined with the compounds adsorbed on the TiO₂ particle surface. Scan rate dependencies of oxidation peak currents indicate that adsorbed species are consistently characterized by less positive oxidation potentials compared to those attributed to solution free species; the difference ranges from about 0.2 to 0.8 V. Results show that depending on the nature of the working electrode, associating a single oxidation potential to such compounds does not adequately describe their electrochemical behavior. Such observations have relevance in heterogeneous photocatalysis in that predictions of whether a substance will be photooxidized or photoreduced cannot be based on Fermi levels (redox potentials) of the redox couples in homogeneous solutions.     

Substituent effects on redox potentials and optical gap energies of molecule-like Au38(SPhX)24 nanoparticles

A molecule-like substituent effect on redox formal potentials in the nanoparticle series Au(38)(SPhX)(24) has been discovered. Electron-withdrawing "X" substituents energetically favor reduction and disfavor oxidation, and give formal potentials that correlate with Hammett substituent constants. The ligand monolayer of the nanoparticles is shown, thereby, to play a strong role in determining electronic energies of the nanoparticle core and is more than simply a protecting or capping layer. The substituent effect does not, however, detectably change the HOMO-LUMO gap energy, being identical for the HOMO and LUMO levels and presumably inductive in nature.     

Theoretic calculation for understanding the oxidation process of 1,4-dimethoxybenzene-based compounds as redox shuttles for overcharge protection of lithium ion batteries

The effect of substituents on the oxidation potential for the one-electron reaction of 1,4-dimethoxybenzene was understood with a theoretical calculation based on density functional theory (DFT) at the level of B3LYP/6-311+G(d). It is found that the oxidation potential for the one-electron reaction of 1,4-dimethoxybenzene is 4.13 V (vs Li/Li(+)) and can be changed from 3.8 to 5.9 V (vs Li/Li(+)) by substituting electron-donating or electron-withdrawing groups for the hydrogen atoms on the aromatic ring. These potentials are in the range of the limited potentials for the lithium ion batteries using different cathode materials, and thus the substituted compounds can be selected as the redox shuttles for the overcharge prevention of these batteries. The oxidation potential of 1,4-dimethoxybenzene decreases when the hydrogen atoms are replaced with electron-donating groups but increases when replaced with electron-withdrawing groups. The further oxidation of these substituted compounds was also analyzed on the basis of the theoretic calculation.     

Charge transfer reactions in alkane and cycloalkane systems. Estimated ionization potentials

Rate constants of change transfer reactions k_CT, involving C₃? C₉ alkanes and cycloalkanes, have been determined in an ion cyclotron resonance mass spectrometer. The rate constants are significantly lower than the corresponding rate constants for collision when the reaction is less than about 0.5 eV exothermic for linear alkane ions, or less than about 0.2 eV exothermic for cycloalkane ions. In this region of low reaction efficiency, the efficiency of reaction with linear or branched alkanes seems to depend primarily on reaction exothermicity. (The efficiencies of reaction of a given ion with cyclic alkanes also depend on ΔH_rn, but are higher than for reactions with other compounds). Although the lowered reaction efficiencies probably result, at least in part, from unfavorable Franck–Condon factors in the energy range near the ionization onset, quantitative correlations between reaction efficiency and estimated relative Franck–Condon factors were not observed. When the enthalpy of reaction is small (less than about ?0.15 eV), it is seen that the reverse charge transfer can also occur, and equilibrium is established under the conditions of these experiments. From the observed equilibrium constants, values for the standard free energy change are derived, and assuming that ΔS is small for electron transfer equilibria, values of ΔH_rn are estimated. In the case of the equilibria involving cyclohexane ion, these values of ΔH_rn lead to estimates of the ionization potentials of methylcyclopentane, 3-methylpentane, n-octane, 2,2-dimethylbutane, and 2,3-dimethylbutane, which are lower than the ionization potentials of cyclohexane, that is, <9.88 eV, although all these compounds had previously been reported to have ionization potentials above 10.03 eV. That the ionization potentials are indeed lower than 10.03 eV is confirmed by determining the quantum yields of ionization with 10.03-eV photons. It is pointed out that the conclusions reached here apparently also apply to the charge transfer reactions of alkane ions in the liquid phase.     

Physicochemical Grounds for Application of Schungite for Neutralization of 1,1-Dimethylhydrazine in Wastewater

Chromatography–mass spectrometry and MALDI mass spectrometry have been used to study the interaction of 1,1-dimethylhydrazine and products of its oxidation with the surface of mineral schungite in aqueous solutions. A comparative analysis has been performed for organic compounds contained in initial and equilibrium 1,1-dimethylhydrazine solutions brought in contact with schungite, as well as compounds desorbed from the modified surfaces of the mineral and its inorganic components. The analysis has revealed the efficiency of schungite as a low-cost and environmentally friendly sorbent capable of catalyzing the profound oxidation of 1,1-dimethylhydrazine and products of its transformation to nontoxic low-molecularmass substances. Environmentally safe methods have been proposed for the regeneration of used schungite.     

Determination of cyanide in the pure state and in mixtures with organic halosulfonamides

Eight aryl halosulfonamides, both mono and dihalo compounds, have been prepared and characterized by recording their IR and NMR spectra and successfully used for determining cyanide in solution. The behavior of these compounds as oxidimetric analytical reagents toward CN⁻ ion in metal salts and complexes has been investigated and general procedures for its estimation in the pure state, in the presence of halide or in cyanide and thiocyanate mixtures, have been proposed. The same procedures are also useful for computing the number of cyanide ligands present in the complexes. The results are reproducible and compare favorably with the argentometric method. The oxidation involves a two-electron change per CN⁻ ion.     

Electrochemical oxidation of tetracycline on a boron doped diamond electrode within the stability potentials of water

Electrochemical oxidation of tetracycline on a boron doped diamond electrode within the stability potentials of water was studied in order to develop an approach for the purification of waste water containing medicinal agents. Cyclic voltammetry, HPLC, and high resolution mass spectrometry were used to establish that in the electrochemical oxidation process, tetracycline adds one oxygen atom to further form organic compounds with molecular weights higher than that of tetracycline. It was found that tetracycline in this region of potentials can be almost completely deactivated without its mineralization.     

Formation of peroxide compounds on the oxidation of lignin by oxygen in an organic solvent

The results are given of a determination of the steady-state concentrations of peroxide compounds on the oxidation of lignin by oxygen in dioxane. An iodometric method of determining peroxides was used, with spectrophotometric control of the amount of iodine formed. It was established that the achievable steady-state concentration of peroxide compounds on the oxidation of lignin is 0.28–0.44 wt. % of O_act (oxygen pressure 1 atm, temperature 50–80°C). With a rise in the temperature, the steady-state concentration of peroxide compounds decreased. The addition of water (30 vol. %) to the organic solvent led to an increase in the rate of accumulation of peroxide compounds. It has been shown that the presence of alkaline and acidic catalysts exerts no appreciable influence on the achievable steady-state concentration and the rate of accumulation of peroxide compounds during the oxidation of lignin.Bratsk Industrial Institute. All-Union Scientific Production Combine of the Pulp and Paper Industry, Leningrad. Translated from Khimiya Prirodnykh Soedinenii, Nos. 3,4, pp. 413–417, May–August, 1992.     

Synthesis, electrochemistry, and gas-phase photoelectron spectroscopic and theoretical studies of 3,6-bis(perfluoroalkyl)-1,2-dithiins

3,6-bis(trifluoromethyl)- and 3,6-bis(pentafluoroethyl)-1,2-dithiin (1a,b), the first known perfluoroalkyl-substituted 1,2-dithiins, were synthesized from (Z,Z)-1,4-bis(tert-butylthio)-1,3-butadiene (2) to evaluate the effects of electron-withdrawing groups on the ionization and oxidation potentials of 1,2-dithiins. Analysis of the photoelectron spectra of 1a and 1b provided a basis for assigning orbital compositions. Ab initio calculations on these compounds showed that they adopt a twist geometry as does 1,2-dithiin (1c) itself. Cyclic voltammetric studies on 1a and 1b revealed a reversible oxidation followed by an irreversible oxidation at much more positive potentials than for 1,2-dithiin and 3,6-dimethyl-1,2-dithiin (1d). The oxidation potentials determined electrochemically do not correlate with the ionization potentials determined by photoelectron spectroscopy. This result supports the previously advanced hypothesis that there is a geometry change on electrochemical oxidation leading to a planar radical cation.