Generation of Aryl and Heteroaryl Magnesium Reagents in Toluene by Br/Mg or Cl/Mg Exchange

The alkylmagnesium alkoxide sBuMgOR?LiOR (R=2‐ethylhexyl), which was prepared as a 1.5 m solution in toluene, undergoes very fast Br/Mg exchange with aryl and heteroaryl bromides, producing aryl and heteroaryl magnesium alkoxides (ArMgOR?LiOR) in toluene. These Grignard reagents react with a broad range of electrophiles, including aldehydes, ketones, allyl bromides, acyl chlorides, epoxides, and aziridines, in good yields. Remarkably, the related reagent sBu₂Mg?2 LiOR (R=2‐ethylhexyl) undergoes Cl/Mg exchange with various electron‐rich aryl chlorides in toluene, producing diorganomagnesium species of type Ar₂Mg?2 LiOR, which react well with aldehydes and allyl bromides.     

Pd-catalyzed cross-coupling of α-(acyloxy)-tri-n-butylstannanes with alkenyl, aryl, and heteroaryl electrophiles

Racemic and scalemic α-(acyloxy)-tri-n-butylstannanes undergo Pd-catalyzed cross-couplings with alkenyl/aryl/heteroaryl iodides, bromides, and triflates in moderate to good yields in THF at 45 °C. Simple aryl iodides and unprotected aza-arenes, two classes of electrophiles that typically react sluggishly, are also good substrates. Cross-couplings proceed with retention of configuration at the alkenyl and stannyl-substituted stereocenters.     

Heteroaryl manganese reagents: direct preparation and reactivity studies

Direct preparation of various heteroaryl manganese reagents was performed by using highly active manganese (Mn∗) and heteroaryl halides. The resulting organomanganese reagents were coupled with electrophiles such as aryl halides, vinyl halides, and benzoyl chlorides under mild reaction conditions. The corresponding coupling products were obtained in good yields.     

Direct aminoalkylation of arenes and hetarenes via Ni-catalyzed Negishi cross-coupling reactions

A direct room-temperature Ni-catalyzed cross-coupling of aminoalkylzinc halides, readily available from the corresponding aminoalkyl chlorides via Grignard reagents, with aryl and hetaryl electrophiles, allows a convenient one-step preparation of aminoalkyl (het)arenes, bearing a basic tertiary nitrogen in the side chain, including piperidine and tropane derivatives. Such aminoalkylarene scaffolds are widely present in various biologically active molecules.     

Preparation of cyclic alkenylmagnesium reagents via an iodine/magnesium exchange

The reaction of various cyclic alkenyl iodides with i-PrMgCl.LiCl produces the corresponding alkenylmagnesium reagents under mild conditions. After reaction with various electrophiles, like allylic halides, disulfides, aldehydes and acid chlorides, the expected products are obtained in 53-91% yield. Remarkably, the mild conditions of the I/Mg-exchange tolerate the presence of sensitive diene functionalities.     

Preparation and Suzuki-Miyaura coupling reactions of tetrahydropyridine-2-boronic acid pinacol esters

[reaction: see text] A study on the conversion of lactam-derived vinyl triflates and phosphates into the corresponding vinyl boronates was carried out. While delta-valerolactam-derived vinyl triflates were successfully converted into 1,4,5,6-tetrahydropyridine-2-boronic acid pinacol ester derivatives by Pd-catalyzed coupling reaction with both bis(pinacolato)diboron and pinacolborane, pyrrolidinone and epsilon-caprolactam derivatives either did not react or were readily reduced. The delta-valerolactam-derived vinyl boronates are thermally stable compounds that efficiently coupled, under Pd catalysis, with structurally diverse aryl and heteroaryl bromides and triflates, vinyl iodides and bromides, and aromatic acid chlorides, to give the corresponding 2-substituted piperidines in good to excellent yields. The number of electrophiles that can virtually be coupled with these new boronic esters makes them very useful reagents for the synthesis of N-heterocyclic compounds.     

Iron-catalyzed enyne cross-coupling reaction

In the presence of 0.5-1 mol % of FeCl(3) with lithium bromide as a crucial additive, alkynyl Grignard reagents, prepared from the corresponding alkynes and methylmagnesium bromide, react with alkenyl bromides or triflates to give the corresponding conjugated enynes in high to excellent yields. The reaction shows wide applicability to various terminal alkynes and alkenyl electrophiles.     

Highly reactive, general and long-lived catalysts for palladium-catalyzed amination of heteroaryl and aryl chlorides, bromides, and iodides: scope and structure-activity relationships

We describe a systematic study of the scope and relationship between ligand structure and activity for a highly efficient and selective class of catalysts containing sterically hindered chelating alkylphosphines for the amination of heteroaryl and aryl chlorides, bromides, and iodides. In the presence of this catalyst, aryl and heteroaryl chlorides, bromides, and iodides react with many primary amines in high yields with part-per-million quantities of palladium precursor and ligand. Many reactions of primary amines with both heteroaryl and aryl chlorides, bromides, and iodides occur to completion with 0.0005-0.05 mol % catalyst. A comparison of the reactivity of this catalyst for the coupling of primary amines at these loadings is made with catalysts generated from hindered monophosphines and carbenes, and these data illustrate the benefits of chelation. Studies on structural variants of the most active catalyst indicate that a rigid backbone in the bidentate structure, strong electron donation, and severe hindrance all contribute to its high reactivity. Thus, these complexes constitute a fourth-generation catalyst for the amination of aryl halides, whose activity complements catalysts based on monophosphines and carbenes.     

An efficient Negishi cross-coupling reaction catalyzed by nickel(II) and diethyl phosphite

A combination of diethyl phosphite-DMAP and Ni(II) salts forms a very effective catalytic system for the cross-coupling reactions of arylzinc halides with aryl, heteroaryl, and alkenyl bromides, chlorides, triflates, and nonaflates. The choice of solvent is quite important and the mixture of THF-N-ethylpyrrolidinone (NEP) (8:1) was found to be optimal. The reaction usually requires only 0.05 mol % of NiCl₂ or Ni(acac)₂ as catalyst and proceeds at room temperature within 1-48 h.     

One-pot Negishi cross-coupling reactions of in situ generated zinc reagents with aryl chlorides, bromides, and triflates

In situ generated aryl, heteroaryl, alkyl, or benzylic polyfunctional zinc reagents obtained by the addition of zinc and LiCl to the corresponding organic iodides undergo smooth Pd(0)-catalyzed cross-coupling reactions with aryl bromides, chlorides, and triflates in the presence of PEPPSI as a catalyst. This procedure avoids the manipulation of water and air-sensitive organozinc reagents and produces cross-coupling products in high yields.     

Pd/C-catalyzed room-temperature hydrodehalogenation of aryl halides with hydrazine hydrochloride

Treatment of aryl and heteroaryl halides with catalytic amounts of Pd/C in the presence of hydrazine hydrochloride in basic medium (sodium hydroxide or sodium t-butylate) at room temperature leads to the corresponding hydrodehalogenation products with high selectivity. Aryl iodides, bromides, chlorides and fluorides can be reduced using this reagent combination. The reduction is compatible with various electron-donating or electron-withdrawing groups.     

Regiospecific synthesis of 1,5-disubstituted-1H-pyrazoles containing differentiated 3,4-dicarboxylic acid esters via Suzuki coupling of the corresponding 5-trifluoromethane sulfonates

A general procedure is described for the regiospecific preparation of 1-substituted-5-hydroxy-1H-pyrazoles containing differentiated ester moieties at the 3- and 4-positions. This process involves the coupling of monosubstituted benzyl carbazates with various malonyl chlorides or acids, deprotection of the coupling products via catalytic hydrogenation, and subsequent derivatization of the resulting hydrazides with monoalkyl oxalyl chlorides. The 5-hydroxy-1H-pyrazoles are readily transformed to the corresponding trifluoromethane sulfonates, which undergo palladium-mediated Suzuki coupling with a variety of boronic acids (aryl, heteroaryl, and alkenyl) in moderate to excellent yields (24-92%). The ester groups present in one of the resulting 1,5-disubstituted-1H-pyrazoles are further modified by selective hydrolysis or conversion to the corresponding dicarboxylic acid derivative followed by selective mono-esterification.     

Stereospecific cross-coupling of alpha-(thiocarbamoyl)organostannanes with alkenyl, aryl, and heteroaryl iodides

Racemic and scalemic PTC-protected alpha-hydroxystannanes cross-couple with alkenyl/aryl/heteroaryl iodides in moderate to good yields using copper(I) thiophene-2-carboxylate (CuTC) in THF at or below room temperature. Simple aryl iodides and 1-iodocyclohexene, two classes of electrophiles that typically react sluggishly, are also good substrates. Cross-couplings proceed with retention of configuration at the alkenyl- and stannyl-substituted stereocenters.     

An "anti-Baldwin" 3-exo-dig cyclization: preparation of vinylidene cyclopropanes from electron-poor alkenes

Stabilized carbanions undergo an uncommon 3-exodig cyclization onto propargyl halides through an SN2' substitution. Propargyl iodides as electrophiles are necessary to achieve good yields (36-95%) for most substrates, although the usefulness of chlorides and bromides is documented. A variety of monocyclic and bicyclic vinylidene cyclopropanes can be prepared. These products are not available by standard carbene methodology.     

Magnesiation of electron-rich aryl bromides and their use in nickel-catalyzed cross-coupling reactions

Electron-rich aryl bromides are rapidly converted to the corresponding lithium triarylmagnesiates with (n-Bu)3MgLi, which undergo efficient nickel-catalyzed Kumada-Corriu cross-coupling reactions with a variety of aryl and alkenyl bromides, chlorides, tosylates, and triflates.     

Acyclic diaminocarbenes: simple, versatile ligands for cross-coupling reactions

Acyclic diaminocarbenes are found to be useful ligands for palladium catalyzed Suzuki-Miyaura, Sonogashira and Heck cross-coupling reactions of aryl/alkenyl bromides and chlorides.     

Cascade alkenyl amination/Heck reaction promoted by a bifunctional palladium catalyst: a novel one-pot synthesis of indoles from o-haloanilines and alkenyl halides

A novel approach for the synthesis of the important indole ring is described. Indoles are obtained from o-bromoanilines and alkenyl halides in a Pd-catalyzed cascade process that involves an alkenyl amination followed by an intramolecular Heck reaction. The overall process represents the first example of the participation of alkenyl amination reactions in Pd-catalyzed cascade reactions. Initially, the relative reactivity of aryl and alkenyl bromides and chlorides towards Pd-catalyzed amination was investigated. Competition experiments were carried out in the presence of primary and secondary amines, and these revealed the reactivity order alkenyl bromides > aryl bromides > alkenyl chlorides > aryl chlorides, as well as very high chemoselectivity; the more reactive halide was always favored. Thereafter, optimized reaction conditions for the sequential alkenyl amination/Heck cyclization to give indoles were investigated with the model reaction of o-bromoaniline with alpha-bromostyrene. An extensive screening of ligands, bases, and reaction conditions revealed that the [Pd2(dba)3]/DavePhos, NaOtBu, toluene combination at 100 degrees C were the optimized reaction conditions to carry out the cascade process (dba=dibenzylideneacetone, DavePhos=2-dicyclohexylphosphino-2'-N,N-dimethylaminobiphenyl). The reaction proceeds with aryl, alkyl, and functionalized substitutents in both starting reactants. The cyclization was also studied with N-substituted o-bromoanilines (which would give rise to N-substituted indoles); however, in this case, indole formation occurred only with 1-substituted-2-bromoalkenes. Finally, the application of this methodology to o-chloroanilines required further optimization. Although the catalyst based on DavePhos failed to promote the cascade process, a catalytic combination based on [Pd2(dba)3]/X-Phos promoted the formation of the indole ring also from the less reactive chloroanilines.     

Pd-catalyzed aryl amination mediated by well defined, N-heterocyclic carbene (NHC)-Pd precatalysts, PEPPSI

Pd-N-heterocyclic carbene (NHC)-catalyzed Buchwald-Hartwig amination protocols mediated by Pd-PEPPSI precatalysts is described. These protocols provide access to a range of hindered and functionalized drug-like aryl amines in high yield with both electron-deficient and electron-rich aryl- and heteroaryl chlorides and bromides. Variations in solvent polarity, base and temperature are tolerated, enhancing the scope and utility of this protocol. A mechanistic rationalization for base strength (pKb) requirements is also provided.     

Preparation of new polyfunctional magnesiated heterocycles using a chlorine-, bromine-, or iodine-magnesium exchange

The reaction of heteroaryl iodides with i-PrMgBr (ca. 1.0 equiv) in THF provides the corresponding magnesiated heterocycles. Functional groups such as an ester, cyano, or chloride functions are tolerated in these new Grignard reagents if the exchange can be performed below -20 degrees C. This is the case for all heterocycles bearing electron-withdrawing groups or chelating functions facilitating the iodine-magnesium exchange. In many cases, the exchange can be extended to heteroaryl bromides, and a case of a chlorine-magnesium exchange is described with tetrachlorothiophene. This new preparation of functionalized heteroarylmagnesium compounds provides after reaction with various electrophiles a new entry to a broad range of polyfunctional pyridines, imidazoles, furanes, thiophenes, pyrroles, antipyrines, and uracil derivatives. The application of the halogen-magnesium exchange in the solid phase allows the performance of solid-phase synthesis, with potential applications for combinatorial chemistry.     

Palladium-catalyzed Suzuki-Miyaura cross-coupling reactions of potassium aryl- and heteroaryltrifluoroborates

An extended study of the reactivity of potassium aryl- and heteroaryltrifluoroborates in Suzuki-Miyaura cross-coupling reactions is presented. The coupling of aryl- and electron-rich heteroaryltrifluoroborates with aryl and activated heteroaryl bromides proceeds readily under ligandless conditions. When deactivated aryl- and heteroaryltrifluoroborates are coupled with aryl and heteroaryl bromides and chlorides, a low loading (0.5-2%) of PdCl(2)(dppf).CH(2)Cl(2) efficiently catalyzes the reactions. Under either condition, reactions can generally be carried out in an open atmosphere.