Control of the Harmful Alga Microcystis aeruginosa and Absorption of Nitrogen and Phosphorus by Candida utilis

This study is aimed at controlling eutrophication through converting the nutrients such as nitrogen and phosphorus into microbial protein and simultaneously inhibiting the growth of Microcystis aeruginosa by Candida utilis. C. utilis and M. aeruginosa (initial cell density was 2.25?×?10⁷ and 4.15?×?10⁷ cells·mL^?1) were cultured together in the absence or presence of a carbon source (glucose) during a 10-day experiment. In the absence of carbon source, the measured removal efficiencies of NH₄ ⁺–N and PO₄ ^3?–P were 41.39?±?2.19 % and 82.93?±?3.95 %, respectively, at the second day, with the removal efficiency of 67.82?±?2.29 % for M. aeruginosa at the fourth day. In contrast, the removal efficiencies of NH₄ ⁺–N and PO₄ ^3?–P were increased to 87.45?±?4.25 % and 83.73?±?3.55 %, respectively, while the removal efficiency of M. aeruginosa decreased to 37.89?±?8.41 % in the presence of the carbon source (C/N?=?2:1). These results showed that the growth of M. aeruginosa was inhibited by C. utilis. Our finding sheds light on a novel potential approach for yeast to consume nutrients and control harmful algal during bloom events.     

Production of Metabolites with Antioxidant and Emulsifying Properties by Antarctic Strain Sporobolomyces salmonicolor AL1

The Sporobolomyces salmonicolor AL₁ Antarctic strain was cultivated and two bioproducts were obtained: exopolysaccharide and biomass. The biologically active substances ergosterol, torularhodin, torulene, β-carotene and CoQ₁₀ were extracted from the biomass and were quantified as follows: ergosterol 5.2?±?0.2 mg/g, torularhodin 458.3?±?24.5 μg/g, torulene 273.7?±?14.5 μg/g, β-carotene 129.2?±?7.3 μg/g and coenzyme Q₁₀ (CoQ₁₀) 236.1?±?12.1 μg/g. Their antioxidant activity was estimated according to the cathode voltammetry method. The most pronounced antioxidant activity (according to trolox) was exhibited by β-carotene 3.78, followed by CoQ₁₀ 3.60, both of them being the main contributors to the total extract activity of 3.19. The biologically active metabolites in combination with exoglucomannan as emulsifier were used for the creation of model emulsion systems characterised by great stability. The absorption of UVA rays by the model emulsions was studied.     

α-Glucosidase Inhibition and Antioxidant Properties of Streptomyces sp.: In Vitro

Streptomyces strain isolated from the soil sediment was studied for its in vitro α-glucosidase and antioxidant properties. Morphological characterization and 16S rRNA partial gene sequencing were carried out to confirm that the strain Loyola AR1 belongs to genus Streptomyces sp. Modified nutrient glucose broth was used as the basal medium for growth and metabolites production. Ethyl acetate extract of Loyola AR1 (EA-Loyola AR1) showed 50 % α-glucosidase inhibition at the concentration of 860.50?±?2.68 μg/ml. Antioxidant properties such as total phenolic content of EA-Loyola AR1 was 176.83?±?1.17 mg of catechol equivalents/g extracts. EA-Loyola AR1 showed significant scavenging activity on 2,2-diphenyl-picrylhydrazyl (50 % inhibition (IC₅₀), 750.50?±?1.61 μg/ml), hydroxyl (IC₅₀, 690.20?±?2.38 μg/ml), nitric oxide (IC₅₀, 850.50?±?1.77 μg/ml), and superoxide (IC₅₀, 880.08?±?1.80 μg/ml) radicals, as well as reducing power. EA-Loyola AR1 showed strong suppressive effect on lipid peroxidation (IC₅₀, 670.50?±?2.52 μg/ml). Antioxidants of β-carotene linoleate model system reveals significantly lower than butylated hydroxyanisole.     

Environmentally friendly method for determination of ammonia nitrogen in fertilisers and wastewaters based on flow injection-spectrophotometric detection using natural reagent from orchid flower

Crude aqueous extract from the orchid ‘Dendrobium Sonia earsakul’ was utilised as a natural product reagent in flow injection analysis (FIA) incorporating a gas diffusion unit (GD) for the determination of ammonia nitrogen. Sample solution was injected into a NaOH donor stream to generate ammonia gas (NH₃). In the GD unit, NH₃ diffused across a PTFE gas-permeable membrane into the acceptor stream of the orchid extract. As the result, the aqueous orchid reagent became more alkaline and its colour changed from purple to green. The change in the colour of orchid acceptor correlated with the concentration of ammonia nitrogen in the sample and its absorbance monitored by a spectrophotometer at 600 nm. Ammonia nitrogen in chemical fertiliser samples and wastewater samples from agricultural fields were determined and reported as %N (w/w) and mg N L^?1, respectively. For chemical fertilisers which contained high content of ammonia nitrogen, a flow rate of 1.0 mL min^?1 and injection volume of 100 µL were used with a linear range of 5–40 mmol L^?1 and detection limit of 2.12 mmol L^?1. However, a higher sensitivity was required for wastewater samples having low ammonia nitrogen content. The flow rate was reduced to 0.3 mL min^?1 and the injection volume increased to 1000 µL. As a result, detection limit of 0.76 mmol L^?1 was achieved with linear range of 1–5 mmol L^?1. The results of our method agreed well with that using the OPA method employing fluorescence detection.     

Phospholipid/Polydiacetylene Vesicle-Based Colorimetric Assay for High-Throughput Screening of Bacteriocins and Halocins

Multi-phase anaerobic reactor for H₂ and CH₄ production from paperboard mill wastewater was studied. The reactor was operated at hydraulic retention times (HRTs) of 12, 18, 24, and 36 h, and organic loading rates (OLRs) of 2.2, 1.5, 1.1, and 0.75 kg chemical oxygen demand (COD)/m³ day, respectively. HRT of 12 h and OLR of 2.2 kg COD/m³ day provided maximum hydrogen yield of 42.76?±?14.5 ml/g COD_removed and volumetric substrate uptake rate (?rS) of 16.51?±?4.43 mg COD/L h. This corresponded to the highest soluble COD/total COD (SCOD/TCOD) ratio of 56.25?±?3.3 % and the maximum volatile fatty acid (VFA) yield (Y_VFA) of 0.21?±?0.03 g VFA/g COD, confirming that H₂ was mainly produced through SCOD conversion. The highest methane yield (18.78?±?3.8 ml/g COD_removed) and ?rS of 21.74?±?1.34 mgCOD/L h were achieved at an HRT of 36 h and OLR of 0.75 kg COD/m³ day. The maximum hydrogen production rate (HPR) and methane production rate (MPR) were achieved at carbon to nitrogen (C/N) ratio of 47.9 and 14.3, respectively. This implies the important effect of C/N ratio on the distinction between the dominant microorganism bioactivities responsible for H₂ and CH₄ production.     

Experimental and theoretical evidence suggests carbamate intermediates play a key role in CO2 sequestration catalysed by sterically hindered amines

The chemisorption of CO₂ by aqueous-hindered amines has been investigated experimentally and theoretically. Negative-ion ESI–MS analysis of solutions containing a sterically hindered amine and a source of ¹³CO₂ reveals peaks corresponding to [M–H + 45]^?. These ions readily lose 45 Da when subjected to collisional activation, and together with other key fragments confirms the generation of the ¹³C-labelled carbamate derivatives. The thermochemistry of the two key capture reactions: $$2.{\text{amine }} + {\text{ CO}}_{ 2} { \leftrightarrows }{\text{amine}} - {\text{CO}}_{ 2}^{ - } + {\text{ amine}} - {\text{H}}^{ + } {\kern 1pt} \quad 1:{\text{carbam}}$$ $${\text{amine }} + {\text{ CO}}_{ 2} + {\text{ H}}_{ 2} {\text{O}}{ \leftrightarrows }{\text{HCO}}_{ 3}^{ - } + {\text{ amine}} - {\text{H}}^{ + } \quad 2:{\text{ bicarb}}$$ at 298 K was modelled using composite chemistry methods, CCSD(T), DFT, and SM8 free energies of solvation. The aqueous reaction free energies (ΔG ₂₉₈) for reaction 1 are predicted to be more negative than ΔG ₂₉₈ for reaction 2 when amine = ammonia, 2-aminoethanol (MEA), 2-amino-2-methyl-1-propanol (AMP), 2-amino-2-hydroxymethyl-propane-1,3-diol (tris), and 2-piperidinemethanol (2-PM). For AMP, tris, and 2-PM, activation free energies ΔG ₂₉₈ ^? for reaction 1 (SM8 + CCSD(T)/6-311 ++G(d,p)//M08-HX/MG3S: 38–67 kJ mol^?1) are smaller than the corresponding values for 2 (109–113 kJ mol^?1). For 2-PM, the computed carbamate ΔG ₂₉₈ ^? (38 kJ mol^?1) is comparable to the MEA value (45 kJ mol^?1), whereas the primary amines with tertiary alpha carbons have slightly larger values (60–70 kJ mol^?1). The organic amine values are much lower than the value for ammonia (93 kJ mol^?1). The results indicate CO₂ chemisorption proceeds via a carbamate intermediate for all aqueous primary and secondary amines. Hindered carbamates are susceptible to further chemical transformations following their formation.     

Decomposition of 8 mol·L<Superscript>−1</Superscript> Urea Solution at 298.15 K

Degradation of urea in 8 mol·L^?1 aqueous solution (20% w/w N) has been studied at 298.15?±?0.01 K over a time period of 150 days. The data were obtained by periodicaly measuring the electric conductivity, acidity, and concentrations of the main species of the solution, such as cyanate, ammonim carbonate and ammonium hydrogencarbonate. The concentration of un-ionized ammonia was calculated on the basis of the data for the total ammonia content in the solution.     

DSC-TG studies on kinetics of curing and thermal decomposition of epoxy–ether amine systems

The cure behavior of diglycidyl ether of bisphenol A with a simple ether amine (4,7,10, trioxa -1,13, tridecane diamine), system I and a polyether amine (polypropylene glycol block polyethylene glycol block polypropylene glycol bis 2 amino propyl ether), system II was compared by Differential Scanning Calorimetry. The exothermicity of the curing reaction of system I is higher than that of system II (316 ± 15 J g^?1 for System I and 230 ± 15 J g^?1 for system II). Kinetic parameters viz., activation energy, pre-exponential factor, and rate constant for curing were evaluated by Kissinger method and Kissinger–Akahira–Sunose isoconversion method. Both systems showed low glass transition temperatures and System II shows a much lower T _g (?38 °C) than system I (26 °C). The thermogravimetric analysis of the two cured epoxy amine systems showed comparable thermal stability.     

Removal of Lead(II), Cadmium(II), and Arsenic(III) from Aqueous Solution Using Magnetite Nanoparticles Prepared by Green Synthesis with Box–Behnken Design

Two types of magnetite (Fe₃O₄) nanoparticles were investigated as adsorbents for the simultaneous removal of Pb(II), Cd(II), and As(III) metal ions from aqueous solution. Magnetite nanoparticles were prepared by two synthesis procedures, both using water as solvent, and are referred to as conventional Fe₃O₄ nanoparticles and green Fe₃O₄ nanoparticles. The latter used Citrus limon (lemon) aqueous peel extract as the surfactant. Box–Behnken experimental design was used to investigate the effects of parameters such as initial concentration (20–150?mg?L^?1), pH (2–9), and biomass dosage (1–5?g?L^?1) on the removal of Pb(II), Cd(II), and As(III) ions. The optimum parameters for removal of the studied metal ions from aqueous solutions, including the initial ion concentration (20?mg?L^?1), pH (5.5) and adsorbent dose (5?g?L^?1), were determined. The pseudosecond-order model exhibited the best fit for the kinetic studies, while adsorption equilibrium isotherms were best described by Langmuir and Freundlich models. The optimum conditions were applied for the treatment wastewater. The removal efficiencies of Pb(II), Cd(II), and As(III) using the conventional and green synthesized Fe₃O₄ nanoparticles were 59.4?±?4.3, 18.7?±?1.9 and 17.5?±?1.6, and 98.8?±?5.6, 46.0?±?1.3, and 48.2?±?2.6%, respectively. These results demonstrate the potential of magnetite nanoparticles synthesized using C. limon peel extract as highly efficient adsorbents for the removal of Pb(II), Cd(II), and As(III) ions from aqueous solution.     

Nutrient Removal Efficiency and Physiological Responses of Desmodesmus communis at Different HRTs and Nutrient Stress Condition Using Different Sources of Urban Wastewater Effluents

The objective of the present study was to evaluate the nutrient removal efficiency and the physiological responses in terms of growth, biochemical composition and photosynthetic activity of the autochthonous freshwater algal strain Desmodesmus communis. Microalgae were grown in a primary municipal effluent under different hydraulic retention times (HRTs) and in a two-phases process using both primary and secondary wastewater effluents. Semi-continuous cultures were operated for 7 day at 5-, 3- and 1.5-day HRT and the different dilution rate showed a greater influence on the biomass composition and nutrient removal efficiency. Removal of N-NH₃ and P-PO₄ was over 99 % and the highest accumulation of polysaccharides (57.2 wt.%) was obtained at high HRT (5 day); the maximum content of proteins (26.9 wt.%) was achieved at 1.5-day HRT, even if, under this condition, a clear inefficiency in terms of ammonia removal was observed. Moreover the accumulation of N-NH₃ occurring at 1.5-day HRT caused the decrease of the photosynthetic response in terms of efficiency of light capture (α) and relative electron transport rate (rETR), both parameters extracted from the rapid light curves (RLC) measurements. No significant differences were observed for the total fatty acids (TFAs), with a content of 2–3.5 wt.% for each HRT condition. On the other hand, in the two-phases process, when a nutrient deprivation condition was induced by diluting the culture with the secondary wastewater effluent, the algal cells accumulated TFAs, achieving a maximum content of 9.7 wt.% and a great increment in terms of biomass (1.64?±?0.02 g L^?1) due to the ability of this algal strain to accumulate intracellular N. The wide and accurate investigation of the different aspects related to the whole process represents a relevant point of novelty in this research field and suggests the operational conditions for the start-up of an open pond system for wastewater treatment and biomass production for further applications.     

Extract from Eugenia punicifolia is an Antioxidant and Inhibits Enzymes Related to Metabolic Syndrome

The present study aimed to investigate in vitro biological activities of extract of Eugenia punicifolia leaves (EEP), emphasizing the inhibitory activity of enzymes related to metabolic syndrome and its antioxidant effects. The antioxidant activity was analyzed by free radicals scavengers in vitro assays: DPPH·, ABTS^·+, O₂ ^·?, and NO· and a cell-based assay. EEP were tested in inhibitory colorimetric assays using α-amylase, α-glucosidase, xanthine oxidase, and pancreatic lipase enzymes. The EEP exhibited activity in ABTS^·+, DPPH·, and O₂ ^·? scavenger (IC₅₀?=?10.5?±?1.2, 28.84?±?0.54, and 38.12?±?2.6 μg/mL), respectively. EEP did not show cytotoxic effects, and it showed antioxidant activity in cells in a concentration-dependent manner. EEP exhibited inhibition of α-amylase, α-glucosidase, and xanthine oxidase activities in vitro assays (IC₅₀?=?122.8?±?6.3; 2.9?±?0.1; 23.5?±?2.6), respectively; however, EEP did not inhibit the lipase activity. The findings supported that extract of E. punicifolia leaves is a natural antioxidant and inhibitor of enzymes, such as α-amylase, α-glucosidase, and xanthine oxidase, which can result in a reduction in the carbohydrate absorption rate and decrease of risks factors of cardiovascular disease, thereby providing a novel dietary opportunity for the prevention of metabolic syndrome.     

Discovery of potent and selective acetylcholinesterase (AChE) inhibitors: acacetin 7-O-methyl ether Mannich base derivatives synthesised from easy access natural product naringin

Naringin, as a component universal existing in the peel of some fruits or medicinal plants, was usually selected as the material to synthesise bioactive derivates since it was easy to gain with low cost. In present investigation, eight new acacetin-7-O-methyl ether Mannich base derivatives (1–8) were synthesised from naringin. The bioactivity evaluation revealed that most of them exhibited moderate or potent acetylcholinesterase (AChE) inhibitory activity. Among them, compound 7 (IC₅₀ for AChE = 0.82 ± 0.08 μmol?L^?1, IC₅₀ for BuChE = 46.30 ± 3.26 μmol?L^?1) showed a potent activity and high selectivity compared with the positive control Rivastigmine (IC₅₀ for AChE = 10.54 ± 0.86 μmol?L^?1, IC₅₀ for BuChE = 0.26 ± 0.08 μmol?L^?1). The kinetic study suggested that compound 7 bind to AChE with mix-type inhibitory profile. Molecular docking study revealed that compound 7 could combine both catalytic active site (CAS) and peripheral active site (PAS) of AChE with four points (Trp84, Trp279, Tyr70 and Phe330), while it could bind with BuChE via only His 20.     

Multi-walled carbon nanotubes used as support for lipase from <Emphasis Type="Italic">Burkholderia cepacia</Emphasis>

Commercial lipase from Burkholderia cepacia is immobilized on functionalized multi-walled carbon nanotubes (MWNT-COOH and MWNT-OH) provided by a physical adsorption. The immobilization processes for the carbon nanotubes are defined using immobilization time (0–30 min) and distinct adsorbent:adsorbate ratios (1:4, 1:7, and 1:10) with lipase loading of 100, 175, and 250 mg, respectively. The characterization of the immobilized preparations, the free lipase, and the pure nanotubes (MWNT-COOH and MWNT-OH) indicate that the lipase adsorption is increased. Thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy are used. The specific surface area, pore volumes, and average pore diameters are determined by nitrogen adsorption–desorption isotherms. For the pure lipase, in the range between 40 and 300 °C, the micrograph is acquired. Experimental results clearly show an effective lipase adsorption in a lower period of time (5 min) in MWNT-COOH and MWNT-OH as well as a decrease in the surface area (98.30–45.9(86)?±?2.5 and 97.61–37.71?±?3.3(7) m² g^?1) and the pore volume (0.48–0.25?±?0.01 and 0.39–0.24?±?0.05 cm³ g^?1), indicating that functionalized multi-walled carbon nanotubes can be successfully used as enzyme support.     

AnSBBR Applied to Organic Matter and Sulfate Removal: Interaction Effect Between Feed Strategy and Cod/Sulfate Ratio

A mechanically stirred anaerobic sequencing batch reactor containing anaerobic biomass immobilized on polyurethane foam cubes, treating low-strength synthetic wastewater (500 mg COD L^?1), was operated under different operational conditions to assess the removal of organic matter and sulfate. These conditions were related to fill time, defined by the following feed strategies: batch mode of 10 min, fed-batch mode of 3 h and fed-batch mode of 6 h, and COD/[SO₄ ^2?] ratios of 1.34, 0.67, and 0.34 defined by organic matter concentration of 500 mg COD L^?1 and sulfate concentrations of 373, 746, and 1,493 mg SO₄ ^2? L^?1 in the influent. Thus, nine assays were performed to investigate the influence of each of these parameters, as well as the interaction effect, on the performance of the system. The reactor operated with agitation of 400 rpm, total volume of 4.0 L, and treated 2.0 L synthetic wastewater in 8-h cycles at 30?±?1°C. During all assays, the reactor showed operational stability in relation to the monitored variables such as COD, sulfate, sulfide, sulfite, volatile acids, bicarbonate alkalinity, and solids, thus demonstrating the potential to apply this technology to the combined removal of organic matter and sulfate. In general, the results showed that the 3-h fed-batch operation with a COD/[SO₄ ^2?] ratio of 0.34 presented the best conditions for organic matter removal (89%). The best efficiency for sulfate removal (71%) was accomplished during the assay with a COD/[SO₄ ^2?] ratio of 1.34 and a fill time of 6 h. It was also observed that as fill time and sulfate concentration in the influent increased, the ratio between removed sulfate load and removed organic load also increased. However, it should be pointed out that the aim of this study was not to optimize the removal of organic matter and sulfate, but rather to analyze the behavior of the reactor during the different feed strategies and applied COD/[SO₄ ^2?] ratios, and mainly to analyze the interaction effect, an aspect that has not yet been explored in the literature for batch reactors.     

Surfactant-assisted transport of lead ion through a bulk liquid membrane containing dicyclohexyl-18-crown-6: efficient removal of lead from blood serum and sea water

The selective and efficient surfactant assisted transport of Pb²⁺ ions using a bulk liquid membrane composed of dicyclohexyl-18-crown-6, as a highly selective carrier, in chloroform solution is reported. In the presence of 6.0 × 10^?2 M P₂O₇ ^4? ions and 10^?3 M sodium dodecylsulfate, as suitable stripping agent and membrane/receiving phase interface modifier, respectively, in the receiving phase and 2.4 × 10^?3 M picric acid, as a counter ion in the source phase, the amount of lead transported across the liquid membrane after 5 h is 100.0 ± 1.1. The designed transport system was successfully applied to the removal of lead from sea water and blood serum samples.     

Isolation and Identification of Antioxidative Peptides from Frog (Hylarana guentheri) Protein Hydrolysate by Consecutive Chromatography and Electrospray Ionization Mass Spectrometry

Frog (Hylarana guentheri) proteins were hydrolyzed by papain and Flavourzyme to obtain antioxidative peptides. The antioxidant activities of the frog protein hydrolysates (FPHs) were measured, including 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity (IC₅₀?=?9.94?±?0.13 mg/mL), reducing power (0.39?±?0.01 at 5.0 mg/mL), and oxygen radical absorbance capacity (ORAC) value (789.15?±?75.10 μmol Trolox equivalents/g). The hydrolysates were purified by ultrafiltration, ion exchange chromatography, gel filtration chromatography, and reverse-phase high-performance liquid chromatography (RP-HPLC). Through analysis of ESI-MS/MS, two dipeptides were identified as Leu/Ile-Lys (259.1607 Da) and Phe-Lys (293.1446 Da), respectively.     

Optimization of Anaerobic Co-digestion of Strawberry and Fish Waste

Anaerobic co-digestion of agri-food waste is a promising management alternative. Its implementation, however, requires evaluating the proportion in which waste should be mixed to optimize their centralized treatment. The combined treatment of strawberry extrudate and fish waste, which are widely generated in Mediterranean areas, was optimized. Strawberry extrudate and fish waste were mixed and treated at different proportions (88:12, 94:6, and 97:3, respectively; wet basis). The proportions selected for the mixture allow the different flows to be absorbed simultaneously. The highest methane production was observed for the ratio 94:6 (0.205 m³ _STP CH₄/kg volatile solid) (VS) (STP; 0 °C, 1 atm), with a methane production rate in the range of 5?·?10^?3–9?·?10^?3 m³ _STP/kg VS?·?d, while the highest organic loading rate was observed for the mixture at a proportion 88:12 (1.9?±?0.1 kg VS/m³?·?d). Biodegradability was found to be similar for the 88:12 and 94:6 proportions, with values around 90 % in VS. Nevertheless, the 97:3 ratio was not viable due to a low methane production. An inhibition phenomenon occurred at increasing loads due to the effect of some compounds contained in the fish waste such as chloride or nitrogen.     

Microbial Leaching of Waste Solder for Recovery of Metal

This study proposes an environment-friendly bioleaching process for recovery of metals from solders. Tin-copper (Sn-Cu), tin-copper-silver (Sn-Cu-Ag), and tin-lead (Sn-Pb) solders were used in the current study. The culture supernatant of Aspergillus niger removed metals faster than the culture supernatant of Acidithiobacillus ferrooxidans. Also, the metal removal by A. niger culture supernatant is faster for Sn-Cu-Ag solder as compared to other solder types. The effect of various process parameters such as shaking speed, temperature, volume of culture supernatant, and increased solder weight on bioleaching of metals was studied. About 99 (±1.75)?% metal dissolution was achieved in 60 h, at 200-rpm shaking speed, 30 °C temperature, and by using 100-ml A. niger culture supernatant. An optimum solder weight for bioleaching was found to be 5 g/l. Addition of sodium hydroxide (NaOH) and sodium chloride (NaCl) in the bioleached solution from Sn-Cu-Ag precipitated tin (85?±?0.35 %) and silver (80?±?0.08 %), respectively. Passing of hydrogen sulfide (H₂S) gas at pH 8.1 selectively precipitated lead (57.18?±?0.13 %) from the Sn-Pb bioleached solution. The proposed innovative bioleaching process provides an alternative technology for recycling waste solders to conserve resources and protect environment.     

Physicochemical and Biochemical Profiling of Diphenyl Diselenide

The objective of the present study was to evaluate the physicochemical and biochemical profiling of diphenyl diselenide (PhSe)₂, a selenoorganic compound with biological activity. Experimental protocols were established for chemical stability in isotonic phosphate buffer (PBS) pH 7.4 and in simulated gastric and intestinal fluids, biological stability (bovine serum albumin (BSA) and plasma), solubility in PBS pH 7.4, distribution coefficient (Log D) in octanol/PBS, and determination of free (PhSe)₂ concentrations in BSA and plasma by using liquid chromatography with ultraviolet detection and tandem mass spectrometry. (PhSe)₂ was found to be chemically stable and not susceptible to degradation in plasma. The aqueous solubility was 0.98?±?0.072 μM and the Log D in octanol/PBS system was found to be 3.13. The percentage of unbound fractions of (PhSe)₂ obtained by equilibrium dialysis from BSA and plasma incubated with 100 μM (PhSe)₂ were 0.69?±?0.12 and 0.44?±?0.09 %, respectively. The findings indicated that (PhSe)₂ presents chemical and biological stability. Though, the compound showed low aqueous solubility, high Log D value and high binding to plasmatic protein. These data contribute to the knowledge of the toxicokinetic properties of (PhSe)₂ and further explain its low bioavailability in experimental models.     

Evaluation of the cytotoxicity on breast cancer cell of extracts and compounds isolated from Hyptis pectinata (L.) poit

Abstract

Hyptis pectinata is a herb popularly used in Brazil for the treatment of inflammations, pain, bacterial infections and cancer. In the present study, inflorescences (MPIn), leaves (MPL), branches (MPB), root (MPR) extracts and three compounds isolated from MPIn were assayed against breast tumor cell lines. The structures of the three compounds (pectinolide J, hyptolide and pectinolide E) were determined by means of spectroscopic analysis. Pectinolide J was isolated for the first time. The MPIn, MPL and MPR exhibited specific antiproliferative activity on tumor cell lines when compared to normal cell lines with IC₅₀ of 52.01?±?0.64, 45.91?±?0.02?μg/mL and 82.84?±?0.03?μg/mL, respectively. Although the isolated substances did not present good antiproliferative activity, when the three were associated, a greater biological effect was observed, suggesting a synergistic effect. Hyptolide (5.6?±?0.4?μg/mL) showed IC₅₀ sufficiently low to be considered as a drug prototype.