萃取-紫外分光光度法测定微晶蜡中3, 4-苯并芘含量

要采用萃取-紫外吸收光谱法，测定微晶微量3，4-苯并芘的含量．选择二甲亚砜作为萃取溶剂，绘制工作曲线．结果表明，3，4-苯并芘含量在50-3000ng／g的范围内，成良好的线性关系，相关系数为0．9995．检出限为16ng／g．方法重复性好，相对标准偏差为6．2％，回收率在97．0％-99．4％之间．     

反相高效液相色谱法同时测定三七药材中4种皂苷的含量

建立了以0．02％磷酸-乙腈为流动相，梯度洗脱反相高效液相色谱同时测定中药材三七中三七皂苷R1、人参皂苷Rg1、Rb1和Rd 4种皂苷的新方法。R1、Rg1、Rb1和Rd 4种皂苷的加样回收率分别为89．54％、90．08％、82．82％与84．46％；线性范围分别为0．244-6．110、0．820-20．510、0．396-9．890与0．260-6．500μg。测定了不同规格、部位和来源的三七药材里的4种皂苷R1、Rg1、Rb1和Rd。方法准确可靠，结果稳定，重现性好，可用于三七及其制剂的质控。     

氢化物发生原子荧光光谱法测定磷酸中的砷

采用HCl处理H3PO4试样，氢化物发生原于荧光光谱法测定As，对仪器条件、HCl酸度、预还原剂用量、还原剂用量、共存干扰进行了试验，方法的检出限为0．18ng／mL，测定精密度1．9％-3．0％，回收率为96．0％-98．0％。     

标准加入火焰原子吸收法测定钨及钨化合物中的钾、钠

在以钨为基体的溶液中，利用柠檬酸为掩蔽剂，氯化铯为消电离剂，应用火焰原子吸收法进行钨及钨化合物中钾、钠的测定，5次测定结果的极差值在0．0002％-0．0004％之间，K、Na的加标准回收率分别为98．0％-104．0％及96．4％-102．6％。本方法已应用于钨及钨化合物中钾、钠的测定。     

Sn4+离子修饰的Pd/γ-Al2O3催化卤代芳香硝基化合物选择性加氢

用乙醇．水混合溶液还原方法制备了以聚乙烯吡咯烷酮（PVP）稳定的Pd／γ-Al2O3负载型单金属催化剂，用于二氯代硝基苯中硝基的选择性加氢．实验结果表明，在催化反应体系中直接加入Sn^4＋作为修饰剂，虽在一定程度上降低了Pd／γ-Al2O3的催化活性，却大大提高了二氯苯胺的选择性．在其它反应条件相同的情况下，当不添加和添加Sn^4＋时，二氯代硝基苯的转化率分别在80℃和110℃达100%，而2，5-、2，4-、2，3-二氯苯胺的选择性分别由不加修饰剂的84．5％、76．1％、86．8％上升到Sn^4＋修饰后的98．7％、100％、100％．Sn^4＋的添加方式影响对催化剂的修饰效果．     

SDE-GC-ECD分析水体中有机氯农药

运用单滴溶剂萃取-气相色谱-微池电子捕获检测器(SDE—GC—μECD)联用技术对水体中有机氯农药进行了分析，优化了影响单滴溶剂萃取的多种因素。该方法除了对P，P′-DDD的线性范围在0．4～4ng／mL之间外，其余的七种目标物(α-666，β-666，γ-666，δ-666，P，P′-DDE，0，P′-DDT，P，P′-DDT)线性范围均在0．04～4．0ng／mL之间，相关系数为0．9976～0．9999，回收率范围为83．3％～96．1％，相对标准偏差为2．1％～7．8％。与传统的液液萃取相比，单滴溶剂萃取不仅准确度、精密度相当，而且还具有省时、省溶剂的优点。     

火焰原子吸收光谱法测定尘铅前处理方法的研究

采用火焰原子吸收光谱法测定尘铅样品,在0-1．00mg／L范围内样品中铅含量与吸光度呈良好线性关系,检出限为2．88μg／m^2（按定容体积50mL、采样体积400L计）。采取酸煮法、索氏提取法、微波消解法、超声波提取法等4种前处理方法,在0．100,0．500,1．00mg3个质量水平对空白滤筒进行加标回收试验,4种前处理方法的回收率和测定结果的相对标准偏差分别为91．8％-97．4％,2．2％～3．2％;83．0％-86．8％,7．4％-10．3％;93．6％-97．2％,2．5％～3．7％;89．3％-90．9％,3．2％～4．5％,提取效果以酸煮法和微波消解法最佳,超声波提取法次之,索氏提取法最差。     

改良型比光谱-导数分光光度法在四元混合体系同时测定中的应用

提出了可应用于四元混合体系同时测定的比光谱-导数分光光度法，阐述了该方法的基本原理，并将其应用于氨基比林、苯巴比妥、咖啡因和非那西丁四元混合体系中各组分的同时测定。结果表明，氨基比林、笨巴比妥、咖啡因和非那西丁的回收率分别是109．3％（RSD=4．3％）、102．4％（RSD=6．6％）、108.7％（RSD=5．1％）、98．62％（RSD=3．2％）。方法的准确度和精密度都可以满足四组分同时测定的要求，方法简单、快速。     

顶空进样气质联用法测定涂料中12种卤代烃和苯系物

采用顶空进样气质联用法测定涂料中12种卤代烃和苯系物，选用硅油作母液制备一系列标准样品，对采样温度、平衡时间以及色谱条件进行了讨论。方法也适用于溶剂型涂料和水性涂料。操作简单，定性定量准确可靠，线性范围为1-1000mg／L，最低检测浓度为0．05-0．1mg/L，方法回收率为73．4％-113．3％，相对标准偏差为2．27％-8．69％，并对实际样品进行了测定，取得满意结果。     

溶剂萃取原子吸收光谱法测定头蜡中铅铬镉镍钴

用高压溶样弹将头蜡用HNO3-H2O2溶解，经0．0500mol/L 8-羟基喹啉体氯仿溶液萃取，用原子吸收光谱法测定痕量铅、铬、镉、镍和钴。方法回收率分别为99．0％、99．5％、96．0％、102％和98．5％，RSD分别为2．9％、3．0％、4．1％、3．8％和2．0％。方法可应用于出口头蜡检测。     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Simultaneous propane dehydrogenation andco2hydrogenation overCrOx/SiO2catalyst

Summary Single reverse water-gas shift (RWGS) and dehydrogenation of propane with CO₂(DH-CO₂) reactions in the presence and absence of the CrO_x/SiO₂ catalyst have been studied between 673 and 873 K. It was found that the CrO_x/SiO₂ catalyst is active both in the dehydrogenation of propane and in the RWGS reactions. The obtained results suggest that the dehydrogenation of propane to propene in the presence of CO₂on CrO_x/SiO₂can be facilitated by the RWGS reaction.</o:p>     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

An investigation of the promotional effect of propylene or propane traces on the activity of sulfatedPt/g-Al2O3andPt-Sn/g-Al2O3inCH4combustion

Summary A strong promoting effect of the presence of C₃H₈or C₃H₆was determined for the combustion of CH₄in excess oxygen, over pre-sulfated 1%Pt/g-Al₂O₃and pre-sulfated 1%Pt-2%Sn/g-Al₂O₃catalysts.</o:p>     

LixZryOz三元化合物的制备及表征

采用高温固相法制备了4种高纯度晶相组成的LixZryOz三元化合物,研究了焙烧温度、时间、反应物的种类和初始反应物物质的量比对产物组成的影响,进一步用XRD、SEM及BET分析方法对产物的晶相结构、表面形貌及比表面积进行了表征.实验结果表明,Li2CO3与ZrO2在适当条件下可以合成得到单斜相Li3ZrO3;以LiOH替代Li2CO3,在适当条件下可以分别合成得到四方相Li2ZrO3和三斜/单斜相Li6Zr2O7;进一步以Zr(NO3)4·5H2O代替Zr02,可将单斜相Li6Zr2O7的制备时间由96 h缩短至24 h.SEM照片显示产物硬团聚明显,粒径分布在1～10μm间,BET分析表明样品比表面积处于1.0～9.0 m2·g-1间分布,反应过程中锂的过量以及长时间高温焙烧是引起产物粒径长大和产生硬团聚的主要原因.     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.