Sonochemical Synthesis of Ag/AgCl Nanocubes and Their Efficient Visible‐Light‐Driven Photocatalytic Performance

A novel one‐step sonochemical approach to synthesize a plasmonic photocatalyst of AgCl nanocubes (ca. 115 nm in edge length) with a small amount of Ag metal species is presented. The nanoscale Ag/AgCl hybrid photocatalysts with cubic morphology are readily formed under ambient ultrasonic conditions and neither external heat treatment nor reducing agents are required. The size of the Ag/AgCl photocatalysts could be controlled by changing the concentrations of Ag⁺ ions and polyvinylpyrrolidone molecules in precursor solutions. The compositions, microstructures, influencing factors, and possible growth mechanism of the Ag/AgCl hybrid nanocubes were systematically investigated. The Ag/AgCl photocatalysts show excellent photocatalytic performance for degradation of various dye molecules under visible light.     

Synthesis and Study of Plasmon‐Induced Carrier Behavior at Ag/TiO2 Nanowires

Nanocomposites of Ag/TiO₂ nanowires with enhanced photoelectrochemical performance have been prepared by a facile solvothermal synthesis of TiO₂ nanowires and subsequent photoreduction of Ag⁺ ions to Ag nanoparticles (AgNPs) on the TiO₂ nanowires. The as‐prepared nanocomposites exhibited significantly improved cathodic photocurrent responses under visible‐light illumination, which is attributed to the local electric field enhancement of plasmon resonance effect near the TiO₂ surface rather than by the direct transfer of charge between the two materials. The visible‐light‐driven photocatalytic performance of these nanocomposites in the degradation of methylene blue dye was also studied, and the observed improvement in photocatalytic activity is associated with the extended light absorption range and efficient charge separation due to surface plasmon resonance effect of AgNPs.     

Probing nanocolumnar silver nanoparticle/zinc oxide hierarchical assemblies with advanced surface plasmon resonance and their enhanced photocatalytic performance for formaldehyde removal

Recent advances in photocatalysis focus on the development of materials with hierarchical structure and on the surface plasmon resonance (SPR) phenomenon exhibited by metal nanoparticles (NPs). In this work, both are combined in a material where size‐controllable Ag‐NPs are uniformly loaded onto the hierarchical microporous and mesoporous and nanocolumnar structures of ZnO, resulting in Ag‐NP/ZnO nanocomposites. The embedded Ag‐NPs slightly decrease the hydrophobicity of fibrous ZnO, improve its wettability, and increase the absorption of formaldehyde (H₂CO) onto the photocatalyst, all of this resulting in excellent photodegradation of formaldehyde in aqueous solution. Besides, we found that Ag‐NPs with optimal size not only accelerate the charge transfer to the surface of ZnO, but also strengthen the SPR effect in the intercolumnar channels of fibrous ZnO particles combining with high concentration of photo‐generated radical species. The micro‐to‐mesoporous ZnO is like a nanoarray packed Ag‐NPs. With Ag‐NPs of diameter 2.5 < ? < 6.5 nm, ZnO exhibits the most superior photodegradation rate constant value of 0.0239 min^?1 with total formaldehyde removal of 97%. This work presents a new feasible approach involving highly sophisticated Ag‐NP/ZnO architecture combining the SPR effect and hierarchically ordered structures, which results in high photocatalytic activity for formaldehyde photodegradation.     

压电增强的等离激元光催化材料Ag/BaTiO3的制备及性能研究

针对光催化过程中的低光利用率和低催化效率，采用光化学还原法将Ag纳米颗粒均匀修饰在BaTiO₃纳米压电材料表面，制备了x mol/L-Ag/BaTiO₃（x=0.01、0.02、0.04，x为Ag的浓度）等离激元压电光催化剂.研究了压电光催化过程中的反应机理及等离激元颗粒负载的浓度对光催化剂性能的影响.研究结果显示，0.02 mol/L-Ag/BaTiO₃在全光谱光辐照和超声激发的压电场的辅助下，在75 min内可降解91%的罗丹明B，将降解效率提升了21%，证实了纳米复合结构中压电势对表面等离激元光催化活性的重要影响.催化性能的提升源于压电效应和表面等离子体共振效应的协同作用.Ag纳米颗粒的等离子体共振效应（LSPR），使光吸收范围从紫外光区扩大至可见光波段.超声驱动可使BaTiO₃纳米压电体发生形变而于表面产生压电电荷，压电势的存在进一步增强了LSPR诱导的光生载流子分离，促进羟基自由基的生成，加速有机染料的降解.本工作将BaTiO₃的压电效应引入等离子体光催化中，可推广到其他材料和催化系统中，为环境净化提供一种有效的技术.     

Silver Nanoparticles Supported on CeO2‐SBA‐15 by Microwave Irradiation Possess Metal–Support Interactions and Enhanced Catalytic Activity

Metal–support interactions (MSIs) and particle size play important roles in catalytic reactions. For the first time, silver nanoparticles supported on CeO₂‐SBA‐15 supports are reported that possess tunable particle size and MSIs, as prepared by microwave (MW) irradiation, owing to strong charge polarization of CeO₂ clusters (i.e., MW absorption). Characterizations, including TEM, X‐ray photoelectron spectroscopy, and extended X‐ray absorption fine structure, were carried out to disclose the influence of CeO₂ contents on the Ag particle size, MSI effect between Ag nanoparticles and CeO₂‐SBA‐15 supports, and the strong MW absorption of CeO₂ clusters that contribute to the MSIs during Ag deposition. The Ag particle sizes were controllably tuned from 1.9 to 3.9 nm by changing the loading amounts of CeO₂ from 0.5 to 2.0 wt %. The Ag nanoparticle size was predominantly responsible for the high turnover frequency (TOF) of 0.41 min^?1 in ammonia borane dehydrogenation, whereas both particle size and MSIs contributed to the high TOF of 555 min^?1 in 4‐nitrophenol reduction for Ag/0.5CeO₂‐SBA‐15, which were twice as large as those of Ag/SBA‐15 without CeO₂ and Ag/CeO₂‐SBA‐15 prepared by conventional oil‐bath heating.     

Fabrication of a Simple and Cheap Screen-printed Silver/Silver Chloride (Ag/AgCl) Quasi-reference Electrode

In this work, a silver/silver chloride ink is fabricated using two steps. First the silver ink is prepare using silver, nail polish and acetone. Then the silver ink is painted in a paper substrate and a silver chloride layer is deposited using a bleach solution. The result is the silver/silver chloride conductive ink. The silver ink is cheap ($2.49/g), well-dispersive and very easy to fabricate. The materials were characterized by SEM and XRD. The Ag ink showed the formation of a continuous network throughout the silver ink film with fewer agglomeration. The effective chlorination process was also observed in the Ag/AgCl characterization. Since the Ag/AgCl substrate will be used as a quasi-reference electrode, it is important to investigate the electrical properties. The Ag ink showed an average ohmic resistance of 2.27 Ω. The addition of the AgCl layer decreases the conductivity, as expected. In summary, the Ag/Ag/Cl ink developed is simple, well-dispersed, cheap and with good conductivity. Therefore, it can be used as a conductive ink in the fabrication of quasi-reference electrodes.     

Theoretical Design and Experimental Realization of Quasi Single Electron Enhancement in Plasmonic Catalysis

By a combination of theoretical and experimental design, we probed the effect of a quasi‐single electron on the surface plasmon resonance (SPR)‐mediated catalytic activities of Ag nanoparticles. Specifically, we started by theoretically investigating how the E‐field distribution around the surface of a Ag nanosphere was influenced by static electric field induced by one, two, or three extra fixed electrons embedded in graphene oxide (GO) next to the Ag nanosphere. We found that the presence of the extra electron(s) changed the E‐field distributions and led to higher electric field intensities. Then, we experimentally observed that a quasi‐single electron trapped at the interface between GO and Ag NPs in Ag NPs supported on graphene oxide (GO‐Ag NPs) led to higher catalytic activities as compared to Ag and GO‐Ag NPs without electrons trapped at the interface, representing the first observation of catalytic enhancement promoted by a quasi‐single electron.     

Ag@AgCl修饰的锐钛矿相TiO2纳米管的制备及其光催化性能

首先采用水热合成法和双氧水处理制备了具有锐钛矿相的TiO2纳米管,然后通过沉淀和光化学反应将Ag@AgCl纳米粒子负载于其上,从而制得TiO2纳米管负载的表面等离子体光催化剂.结果表明,经Ag@AgCl纳米粒子修饰后,锐钛矿相TiO2纳米管因表面等离子共振效应而对可见光具有明显的响应,光生电子-空穴对更容易分离,因而T...     

Effect of Chemical Charging/Discharging on Plasmonic Behavior of Silver Metal Nanoparticles Prepared using Citrate‐Stabilized Cadmium Selenide Quantum Dots

The thermodynamics and kinetics of the chemical and electrochemical charging of a catalyst surface are very important to understand its applicability as a catalyst material, particularly in redox catalysis. Through the present study, we hereby communicate the results obtained from our detailed investigations related to the effect of chemical charging on the plasmonic behavior of silver metal nanoparticles (Ag MNPs) as redox catalysts. Two different batches of Ag MNPs were prepared through thermally assisted chemical reduction of silver ions. The difference in these batches was the use or not of citrate‐capped cadmium selenide quantum dots (Q‐CdSe) for the reduction of solution‐phase silver ions to their colloidal plasmonic phase. The charge on the surfaces of the Ag MNPs was varied by the chemical electron injection method by using BH₄^? ions from a NaBH₄ solution. The processes of charging and discharging were monitored by using UV/Vis absorption spectroscopy. The impact of the concentration of the reductant on the charging and discharging processes was also investigated. The Ag MNPs were also tested for their voltammetric response, wherein it was observed that it was more difficult to oxidize the Ag MNPs prepared with Q‐CdSe seeds than to oxidize Ag MNPs prepared without Q‐CdSe particles. Our results demonstrate that Q‐CdSe seeds not only enhance the redox catalytic activity of Ag MNPs but also provide stability towards polarization of their plasmonic behavior.     

Close‐Packed Two‐Dimensional Silver Nanoparticle Arrays: Quadrupolar and Dipolar Surface Plasmon Resonance Coupling

Silver nanoparticles (NPs) ranging in size from 40 to 100 nm were prepared in high yield by using an improved seed‐mediated method. The homogeneous Ag NPs were used as building blocks for 2D assembled Ag NP arrays by using an oil/water interface. A close‐packed 2D array of Ag NPs was fabricated by using packing molecules (3‐mercaptopropyltrimethoxysilane) to control the interparticle spacing. The homogeneous 2D Ag NP array exhibited a strong quadrupolar cooperative plasmon mode resonance and a dipolar red‐shift relative to individual Ag NPs suspended in solution. A well‐arranged 2D Ag NP array was embedded in polydimethylsiloxane film and, with biaxial stretching to control the interparticle distance, concomitant variations of the quadrupolar and dipolar couplings were observed. As the interparticle distance increased, the intensity of the quadrupolar cooperative plasmon mode resonance decreased and dipolar coupling completely disappeared. The local electric field of the 2D Ag NP array was calculated by using finite difference time domain simulation and qualitatively showed agreement with the experimental measurements.     

Photochemical Preparation of Nanoparticles of Ag in Aqueous-Alcoholic Solutions and on the Surface of Mesoporous Silica

Stable nanoparticle colloids of silver were obtained by irradiation of aqueous-alcoholic solutions of AgNO₃ in the presence of mesoporous SiO₂ powder and films modified with benzophenone (BP/SiO₂). Colloidal solutions of Ludox silica were used to stabilize the photochemically produced nanoparticles of silver in solution. Formation of nanoparticles of Ag on the surface of mesoporous silica occurred on irradiation of SiO₂ modified with silver ions (Ag⁺/SiO₂) in the presence of benzophenone solution.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 2, pp. 100–104, March–April, 2005.     

Rapid microwave-assisted synthesis of phenyl ethers under mildly basic and nonaqueous conditions

A mild method for O-alkylation of phenols has been developed using stoichiometric amounts of K₂CO₃ as a base and microwave irradiation. The method is suitable for substrates that are sensitive towards strong bases or hydrolysis, or difficult to extract from an aqueous medium.     

Plasmon-resonance-enhanced visible-light photocatalytic activity of Ag quantum dots/TiO2 microspheres for methyl orange degradation

We successfully prepared Ag quantum dots modified TiO₂ microspheres by facile solvothermal and calcination method. The as-prepared Ag quantum dots/TiO₂ microspheres were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy and UV-vis diffuse reflectance spectroscopy. The Ag quantum dots/TiO₂ photocatalyst showed excellent visible light absorption and efficient photocatalytic activity for methyl orange degradation. And the sample with the molar ratio of 0.05 (Ag to Ti) showed the best visible light photocatalytic activity for methyl orange degradation, mainly because of the surface plasmon resonance (SPR) effects of Ag quantum dots to generate electron and hole pairs for enhanced visible light photocatalysis. Finally, possible visible light photocatalytic mechanism of Ag quantum dots/TiO₂ microspheres for methyl orange degradation was proposed in detail.     

银/铂双金属中空纳米颗粒的制备及光学性质研究

通过以Ag纳米颗粒为模板的置换和沉积反应,制备了Ag/Pt双金属复合纳米颗粒.用透射电子显微镜(TEM)对颗粒的形貌、尺寸和结构进行了表征,发现复合颗粒具有中空结构.紫外可见吸收光谱(UV-Vis)研究表明,Ag/Pt双金属中空复合纳米颗粒具有单峰的表面等离子共振吸收特征,随着反应溶液中氯铂酸和硝酸银摩尔比的增加,吸收峰先红移后蓝移.表面增强拉曼光谱实验结果表明,Ag/Pt双金属复合纳米颗粒对吡啶分子具有较好的增强效果.     

Surface Plasmon Resonance‐Enhanced Visible‐NIR‐Driven Photocatalytic and Photothermal Catalytic Performance by Ag/Mesoporous Black TiO2 Nanotube Heterojunctions

Ag/mesoporous black TiO₂ nanotubes heterojunctions (Ag‐MBTHs) were fabricated through a surface hydrogenation, wet‐impregnation and photoreduction strategy. The as‐prepared Ag‐MBTHs possess a relatively high specific surface area of ≈85 m² g^?1 and an average pore size of ≈13.2 nm. The Ag‐MBTHs with a narrow band gap of ≈2.63 eV extend the photoresponse from UV to the visible‐light and near‐infrared (NIR) region. They exhibit excellent visible‐NIR‐driven photothermal catalytic and photocatalytic performance for complete conversion of nitro aromatic compounds (100 %) and mineralization of highly toxic phenol (100 %). The enhancement can be attributed to the mesoporous hollow structures increasing the light multi‐refraction, the Ti³⁺ in frameworks and the surface plasmon resonance (SPR) effect of plasmonic Ag nanoparticles favoring light‐harvesting and spatial separation of photogenerated electron–hole pairs, which is confirmed by transient fluorescence. The fabrication of this SPR‐enhanced visible‐NIR‐driven Ag‐MBTHs catalyst may provide new insights for designing other high‐performance heterojunctions as photocatalytic and photothermal catalytic nanomaterials.