A graphene-based real-time fluorescent assay of deoxyribonuclease I activity and inhibition

Using the remarkable difference in the affinity of graphene oxide (GO) with double strand DNA (dsDNA) and short DNA fragments, we report for the first time a GO-based nonrestriction nuclease responsive system. Our system was composed of GO and a fluorescent dye fluorescein amidite (FAM)-labeled dsDNA substrate (F-dsDNA). At first, the fluorescence of this F-dsDNA substrate was quenched upon addition of GO. When nuclease was added to the mixture of dsDNA and GO, hydrolysis of dsDNA was initiated and small DNA fragments were produced. As a result, the short FAM-linked DNA fragments were released from GO due to the weak affinity of GO with short DNA fragments, and the fluorescence got a restoration. At present, many sensing systems are based on the fact that GO prefers to bind long single strand DNA (ssDNA) over dsDNA or short ssDNA. As for our system, GO has a prior binding with dsDNA over short DNA fragments. Compared with previous methods, this assay platform has some advantages. First, since GO can be prepared in large quantities from graphite available at very low cost, this method shows advantages of simplicity and cost efficiency. Besides, the proposed GO-based nuclease assay provides high sensitivity due to the super quenching capacity of GO. Using deoxyribonuclease I (DNase I) as a model system, DNase I activity can be quantitatively analyzed by the velocity of the enzymatic reaction, and 1.75 U mL⁻¹ DNase I can be significantly detected. Moreover, the fluorescent intensity with various concentrations of nuclease becomes highly discriminating after 3–8 min. Thus, it is possible to detect nuclease activity within 3–8 min, which demonstrates another advantage of quick response of the present system. Finally, use of dsDNA as substrate, our method can achieve real-time nuclease activity/inhibition assay, which is time-saving and effortless.     

A novel fluorescent biosensor for sequence-specific recognition of double-stranded DNA with the platform of graphene oxide

A fluorescent biosensor for sequence-specific recognition of double-stranded DNA (dsDNA) was developed based upon the DNA hybridization between dye-labeled single-stranded DNA (ssDNA) and double-stranded DNA. The fluorescence of FAM-labeled single-stranded DNA was quenched when it adsorbed on the surface of graphene oxide (GO). Upon addition of the target dsDNA, a homopyrimidine·homopurine part of dsDNA on the Simian virus 40 (SV40) (4424-4440, gp6), hybridization occurred between the dye-labeled DNA and the target dsDNA, which induced the dye-labeled DNA desorbed from the surface of GO, and turned on the fluorescence of the dye. Under the optimum conditions, the enhanced fluorescence intensity was proportional to the concentration of target dsDNA in the range 40.0-260 nM, and the detection limit was found to be 14.3 nM alongside the good sequence selectivity.     

水溶性碳纳米粒子的制备及其在DNA和单核苷酸多态性分析中的应用

利用电化学氧化的方法制备了水溶性好、粒径为7～12nm的碳纳米粒子,该碳纳米粒子通过π-π相互作用吸附荧光标记的单链DNA探针,并能有效地猝灭其荧光．当单链DNA探针与匹配的DNA目标分子杂交形成双链DNA时,猝灭的荧光被恢复,由此可以检测1-200nmol／L的DNA目标分子。此外,在碳纳米粒子存在时,由荧光标记的DNA探针和DNA目标分子形成的双链DNA的熔解温度可以简便地被测定,当双链DNA有错配碱基时,其熔解温度降低,由此可方便、快速地分析单核苷酸多态性．     

Conformational change detection of DNA with the fluorogenic reagent of o-phthalaldehyde-beta-mercaptoethanol

o-Phthalaldehyde-beta-mercaptoethanol (OPAME) as a fluorogenic reagent has been found wide applications in the detection of amino acids based on its reaction with primary amino groups. In this contribution, we report our new findings concerning the reactions of OPAME with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA), respectively. It has been found that ssDNA can react with OPAME easily as a result of giving rise to strong fluorescence emissions, while dsDNA, prepared by hybridizing ssDNA with its complementary target prior to the reaction, displays inert chemical activity and gives out weak fluorescence emission. Mechanism investigations have shown that the reaction activity between OPAME and DNA depends on the amino groups that are related to the conformation of uncoiled and exposed extent of DNA structure, and thus the inert chemical activity of dsDNA results from screening of the dsDNA bases in the interior of the double strands. Therefore, we could design a way to detect conformation change of DNA with OPAME and further develop a novel, simple label-free sequence detection method for complementary and single-base mismatched ssDNA in the hybridization of DNA.     

Using molecular beacon to monitor activity of E. coli DNA ligase

NAD(+)-dependent DNA ligase has been widely used in gene diagnostics for disease-associated mutation detection and has proved to be necessary for screening bactericidal drugs targeted to DNA ligases. However, further research has been restricted since conventional ligase assay technology is limited to gel electrophoresis, which is discontinuous, time-consuming and laborious. An innovative approach is developed for monitoring the activity of E. coli DNA ligase catalyzing nucleic acid ligation in the report. This approach utilizes a molecular beacon hybridized with two single-stranded DNA (ssDNA) segments to be ligated to form a hybrid with a nick, and could therefore be recognized by the enzyme. Ligation of the two ssDNA segments would cause conformation changes of the molecular beacon, leading to significant fluorescence enhancement. Compared to gel electrophoresis, this approach can provide real time information about ligase, is more time efficient, and is easier to use. The effect of quinacrine, a drug for malaria, on the activity of the ligase is detected, thereby certifying the capability of the method for developing novel antibacterial drugs targeted at NAD(+)-dependent ligase. The fidelity of strand joining by the ligase is examined based on this approach. The effects of external factors on activity of the ligase are analyzed, and then an assay of E. coli DNA ligase is performed with a broad linear range of 4.0 x 10(-4) Weiss Unit mL(-1) to 0.4 Weiss Unit mL(-1) and the detection limit of 4.0 x 10(-4) Weiss Unit mL(-1).     

Graphene oxide integrated sensor for electrochemical monitoring of mitomycin C-DNA interaction

We present a graphene oxide (GO) integrated disposable electrochemical sensor for the enhanced detection of nucleic acids and the sensitive monitoring of the surface-confined interactions between the anticancer drug mitomycin C (MC) and DNA. Interfacial interactions between immobilized calf thymus double-stranded (dsDNA) and anticancer drug MC were investigated using differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) techniques. Based on three repetitive voltammetric measurements of 120 μg mL(-1) DNA immobilized on GO-modified electrodes, the RSD % (n = 3) was calculated as 10.47% and the detection limit (DL) for dsDNA was found to be 9.06 μg mL(-1). EIS studies revealed that the binding of the drug MC to dsDNA leads to a gradual decrease of its negative charge. As a consequence of this interaction, the negative redox species were allowed to approach the electrode, and thus increase the charge transfer kinetics. On the other hand, DPV studies exploited the decrease of the guanine signal due to drug binding as the basis for specifically probing the biointeraction process between MC and dsDNA.     

A microchip electrophoretic assay for DNA methyltransferase activity based on methylation‐sensitive endonuclease DpnⅡ

DNA methylation is a significant epigenetic modification and the methods for the detection of DNA methyltransferase (MTase) activity are important due to aberrant methylation closely related to the occurrence of cancer. In this study, a simple and rapid microchip electrophoresis (ME) coupled with LED‐induced fluorescence (LEDIF) method was presented for the detection of Dam MTase activity. This strategy was based on methylation‐sensitive endonuclease DpnⅡ which could recognize the same specific site 5′‐GATC‐3′ with Dam MTase in double‐stranded DNA (dsDNA). The adenines in the specific site could be methylated by Dam MTase, then the special site could not be digested by DpnⅡ. Both methylated dsDNA and unmethylated dsDNA could be analyzed by ME‐LEDIF after stained by SYBR gold. The results showed the fluorescence intensities of methylated dsDNA were directly proportional to Dam MTase activities in the range of 0.5–20 U/mL with a detection limit of 0.12 U/mL. Furthermore, the method could successfully be applied to evaluation experiments of Dam MTase inhibitors. The results confirmed the ME‐LEDIF method is a promising approach for inhibitors screening of DNA MTase and development of anticancer drugs     

ssDNA-QDs/GO multicolor fluorescence system for synchronous screening of hepatitis virus DNA

Viral hepatitis is a common infectious disease caused by five viruses (hepatitis virus A, B, C, D, and E). Given the diversity of hepatitis virus, rapid screening and accurate typing of viral hepatitis are the prerequisites for hepatitis therapy. Here, a multicolor fluorescence system was constructed by combining with the multi-color fluorescence properties of CdSe/ZnS quantum dots (QDs, emission wavelengths: 525 nm, 585 nm and 632 nm) and the broad-spectrum fluorescence quenching performance of GO. Taking advantage of the specific recognition of ssDNA modified CdSe/ZnS QDs to target hepatitis virus DNA, the constructed system could effectively distinguish hepatitis A virus DNA (HAV-DNA), hepatitis B virus DNA (HBV-DNA), and hepatitis C virus DNA (HCV-DNA) in a homogeneous solution. Based on the different adsorption property of GO for ssDNA and dsDNA, the fluorescence Forster resonance energy transfer (FRET) process between ssDNA modified QDs and GO could be regulated. The fluorescence signal of the constructed system presented a sensitive response to HAV-DNA, HBV-DNA, and HCV-DNA content in the range of 1.0–192 nM, 8.0–192 nM, and 1.0–128 nM, respectively. The limit of detection for HAV-DNA, HBV-DNA, and HCV-DNA is 0.46 nM, 1.53 nM, and 0.58 nM. The constructed system can be used to screen hepatitis virus DNA in real samples, which provides an alternative strategy for rapid screening and diagnosis of viral hepatitis.     

Sensitive detection of DNA methyltransferase activity based on supercharged fluorescent protein and template-free DNA polymerization

DNA methylation, catalyzed by DNA methyltransferases(MTases), is a key component of genetic regulation, and DNA MTases have been regarded as potential targets in anticancer therapy. Herein, based on our previously developed DNA-mediated supercharged green fluorescent protein(Sc GFP)/graphene oxide(GO) interaction, coupled with methylation-initiated template-free DNA polymerization, we propose a novel fluorescence assay strategy for sensitive detection of DNA MTase activity. A hairpin DNA with a methylation-sensitive site and an amino-modified 3′-terminal(DNA-1) was designed and worked as a starting molecule. In the presence of DNA MTase, methylation-sensitive restriction endonuclease, and terminal deoxynucleotidyl transferase(Td T), DNA-1 can be sequentially methylated, cleaved, and further elongated. The resulting long DNA fragments quickly bind with Sc GFP and form the Sc GFP/DNA nanocomplex. Such nanocomplex can effectively protect Sc GFP from being adsorbed and quenched by GO. Without the methylation-initiated DNA polymerization, the fluorescence of Sc GFP will be quenched by GO. Thus, the DNA MTase activity, which is proportional to the amount of DNA polymerization products, can be measured by reading the fluorescence of Sc GFP/GO. The method was successfully used to detect the activity of DNA adenine methylation(Dam) MTase with a wide linear range(0.1–100 U/m L) and a low detection limit of 0.1 U/m L. In addition, the method showed high selectivity and the potential to be applied in a complex sample. Furthermore, this study was successfully extended to evaluate the inhibition effect of 5-fluorouracil on Dam MTase activity and detect Td T activity.     

基于阳离子型共轭聚合物和核酸适体的腺苷检测新方法

建立了一种基于阳离子型共轭聚合物和核酸适体的腺苷检测新方法. 荧光素修饰的短链DNA与腺苷的核酸适体部分互补, 形成双链DNA; 阳离子型共轭聚合物通过静电作用与双链DNA结合, 发生高效率的荧光共振能量转移(FRET). 加入腺苷后, 腺苷与核酸适体发生特异性结合, 导致双链DNA分解成单链, 使静电吸引力下降, 能量转移效率降低. 通过阳离子型共轭聚合物对单双链DNA的高效识别, 可快速简易地检测出腺苷.     

Aptamer based fluorescent cocaine assay based on the use of graphene oxide and exonuclease III-assisted signal amplification

The article reports an aptamer based assay for cocaine by employing graphene oxide and exonuclease III-assisted signal amplification. It is based on the following scheme and experimental steps: (1) Exo III can digest dsDNA with blunt or recessed 3-terminus, but it has limited activity to ssDNA or dsDNA with protruding 3-terminus; (2) GO can absorb the FAM-labeled ssDNA probe and quench the fluorescence of probe, while the affinity between FAM-labeled mononucleotide and GO is negligible; (3) Cocaine aptamer can be split into two flexible ssDNA pieces (Probe 1 and Probe 2) without significant perturbation of cocaine-binding abilities; (4) The triple complex consisting of Probe 1, Probe 2 and cocaine can be digested by Exo III with the similar efficiency as normal dsDNA. Cocaine aptamer is split into two flexible ssDNA pieces (Probe 2 and 3′-FAM-labeled Probe 1). Cocaine can mediate the cocaine aptamer fragments forming a triplex. The triple complex has unique characteristic with 3′-FAM-labeled blunt end at the Probe 1 and 3′-overhang end at Probe 2. If exonuclease III is added, it will catalyze the stepwise removal of fluorescein (FAM) labeled mononucleotides from the 3-hydroxy termini of the special triplex complex, resulting in liberation of cocaine. The cocaine released in this step can produce a new cleavage cycle, thereby leading to target recycling. Through such a cyclic bound-hydrolysis process, small amounts of cocaine can induce the cleavage of a large number of FAM-labeled probe 1. The cleaved FAM-labeled mononucleotides are not adsorbed on the surface of graphene oxide (GO), so a strong fluorescence signal enhancement is observed as the cocaine triggers enzymatic digestion. Under optimized conditions, the assay allows cocaine to be detected in the 1 to 500 nM concentration range with a detection limit of 0.1 nM. The method was applied to the determination of cocaine in spiked human plasma, with recoveries ranging from 92.0 to 111.8 % and RSD of <12.8 %.

Open image in new window

Graphical abstract Aptamer based fluorescent cocaine assay based on graphene oxide and exonuclease III-assisted signal amplification

     

Label-free fluorescent sensor for mercury(II) ion by using carbon nanotubes to reduce background signal

A simple, selective and sensitive turn-on fluorescent sensor for the detection of mercury(II) ion was developed using Sybr Green I as the signal reporter and SWCNTs as the quencher. Due to the affinity of SWCNTs towards ssDNA and organic dye, Sybr Green I, thymine-rich ssDNA and SWCNTs could form a self-assembly of three components, resulting in fluorescence quenching. Upon addition of another thymine-rich ssDNA and mercury(II) ion, formation of dsDNA via T-Hg(2+)-T base pairs enabled Sybr Green I to intercalate into the dsDNA, resulting in the restoration of fluorescence. SWCNTs were found to reduce the background signal and improve the analytical sensitivity. A linear relationship between the fluorescence intensity and the concentration of mercury(II) ion was observed in the range of 20-1250 nM (R = 0.9985) with a detection limit of 7.9 nM. The proposed method was applied to detect mercury(II) ion in tap water samples with good results.     

Enzyme-free and multiplexed microRNA detection using microRNA-initiated DNA molecular motor

In this work, we have developed a sensitive, simple, and enzyme-free assay for detection of microRNAs (miRNAs) by means of a DNA molecular motor consisting of two stem-loop DNAs with identical stems and complementary loop domains. In the presence of miRNA target, it can hybridize with one of the stem-loop DNA to open the stem and to produce a miRNA/DNA hybrid and a single strand (ss) DNA, the ssDNA will in turn hybridize with another stem-loop DNA and finally form a double strand (ds) DNA to release the miRNA. One of the stem-loop DNA is double-labeled by a fluorophore/quencher pair with efficiently quenched fluorescence. The formation of dsDNA can produced specific fluorescence signal for miRNA detection. The released miRNA will continuously initiate the next hybridization of the two stem-loop DNAs to form a cycle-running DNA molecular motor, which results in great fluorescence amplification. With the efficient signal amplification, as low as 1 pmol/L miRNA target can be detected and a wide dynamic range from 1 pmol/L to 2 nmol/L is also obtained. Moreover, by designing different stem-loop DNAs specific to different miRNA targets and labeling them with different fluorophores, multiplexed miRNAs can be simultaneously detected in one-tube reaction with the synchronous fluorescence spectrum (SFS) technique.     

Ultrasensitive endonuclease activity and inhibition detection using gold nanoparticle-enhanced fluorescence polarization

We have developed a highly sensitive and selective fluorescence polarization assay method based on the specificity of the DNA cleavage reaction with the enhancement of gold nanoparticles (AuNPs) for assaying endonuclease activity and inhibition. This assay can detect EcoRI endonuclease down to 5.0×10(-4) U mL(-1) with a detection range from 5.0×10(-4) to 10 U mL(-1).     

Real-time Monitoring of Nucleotide Excision of Molecular Beacon Catalyzed by Klenow Fragment

Klenow fragment(KF) uses the activity of a separate exonuclease to excise nucleotide, which is a crucial step in DNA replication and repair. Here is a novel sensitive and convenient method introduced for real-time monitoring nucleotide excision by KF with a molecular beacon as a detecting probe in a homogeneous solution. This method, which overcomes the drawbacks of traditional methods such as discontinuity, time consuming and low sensitivity, was used to assay KF activity and the detection limit reached up to 0.4 U/mL. In addition, the method was applied to investigating the effects of metal ions and chemical drugs on the reaction. The results demonstrate that it is a potential high-throughput assay for screening inhibitors and activity analysis of KF in vitro.     

Nucleic acid detection using carbon nanoparticles as a fluorescent sensing platform

In this communication, we demonstrate for the first time the proof of concept that carbon nanoparticles (CNPs) can be used as an effective fluorescent sensing platform for nucleic acid detection with selectivity down to single-base mismatch. The dye-labeled single-stranded DNA (ssDNA) probe is adsorbed onto the surface of the CNP via π-π interaction, quenching the dye. In the target assay, a double-stranded DNA (dsDNA) hybrid forms, recovering dye fluorescence.     

Sequence-specific recognition of HIV-1 DNA based upon nicking-assisted strand displacement amplification and triplex DNA

Nucleic acid amplification test is a reliable method for primary human immunodeficiency virus(HIV) infection diagnosis.Herein, a novel fluorescent method for sequence-specific recognition of DNA fragment of HIV-1 was established based upon nicking-assisted strand displacement amplification(SDA) and triplex DNA. In the presence of target dsDNA, nicking-assisted SDA process generated a lot of ssDNA, which hybridized with molecular beacon to produce signal. The fluorescence intensity was proportional to the concentration of target dsDNA within the range from 5 to 1000 pmol/L, with a detection limit of 1.4 pmol/L. Moreover, it successfully distinguished target dsDNA from the nucleic acid extractive of human blood. Thus this method has the merit of high sensitivity, and it is suitable for sequence-specific recognition of target dsDNA in complex matrices, which made it a potential application in diagnosis of acquired immunodeficiency syndrome(AIDS) in the future.     

Determination of DNA Hypermethylation Using Anti‐cancer Drug‐Temozolomide

An electrochemical drug‐DNA biosensor was developed for the detection of interaction between the anti‐cancer drug, Temozolomide (TMZ), and DNA sequences by using Differential Pulse Voltammetry at the graphite electrode surfaces. TMZ is a pro‐drug and an alkylating agent that crosses the blood‐brain barrier, so it is mainly used for brain cancers treatment. In this study, we aim to develop a‐proof‐of‐concept study to investigate the effect of TMZ on formerly methylated DNA sequences since TMZ shows its anti‐cancer activity by methylating the DNA. Interaction between TMZ and DNA causes localized distortion of DNA away from an idealized B‐form, resulting in a wider major groove and greater steric accessibility of functional groups in the base of the groove. According to the results, TMZ behaves as a ‘hybridization indicator’ because of its different electrochemical behavior to different strands of DNA. After interaction with TMZ, hybrid (double stranded DNA‐dsDNA) signals decreased dramatically whereas probe (single stranded DNA‐ssDNA) and control signals remain almost unchanged. The signal differences enabled us to distinguish ssDNA and dsDNA without using a label or tag. It is the first study to demonstrate the interaction between the TMZ and dsDNA created from probe and target. We use specific oligonucleotides sequences instead of using long dsDNA sequences.     

A simple visual method for DNA detection based on the formation of gold nanoparticles

A simple visual method for DNA detection during the formation of gold nanoparticles (AuNPs) was developed based on different electrostatic properties of single strand DNA (ssDNA) and double strand DNA (dsDNA). Since the ssDNA is easy to bind to AuNPs due to its exposed bases which could prevent salt-induced aggregation of AuNPs. The dsDNA always present negative charge because its negatively charged phosphate backbone is exposed. In this case, the dsDNA could disturb the adsorption between dsDNA and AuNPs and result in non-aggregation of AuNPs. After hybridization, chloroauric acid and ascorbic acid were added to the mixture solution, and the solution changed to red immediately and turned to purple in 10 min in the present of target DNA. TEM results confirmed that the change of color stemed from aggregation of AuNPs. In order to obtain accurate results by naked eye, the DNA detection assay should be conducted under pH 7.0.