肝癌细胞蛋白差异凝胶电泳技术系统评估方法

利用二维差异凝胶电泳技术(two-d im ensional d ifferential in-gel electrophoresis,2D-D IGE)研究肝癌细胞与正常细胞的差异时应先对其蛋白样品进行标记系统评估,以确保正式实验的成功。在细胞水平上展开蛋白质组研究应尽可能提取到细胞的所有蛋白,为此本研究先比较了机械刮除法、胰酶消化法和PBSE消化法收获肝癌细胞后的细胞形态与蛋白得率,结果显示PBSE消化法收集肝癌细胞时细胞形态完整,提取的蛋白得率最高。然后将提取的细胞蛋白经D IGETM试剂盒的3重荧光(Cy2、Cy3、Cy5)标记后再进行聚丙烯酰胺凝胶电泳(SDS-PAGE)和双向电泳(2DE,two-d im ensional electrophoresis)。前者图像使用Im ageQuant软件进行分析,结果说明肝癌细胞蛋白提取液与该染料能相互兼容,样品得到了有效的标记。2DE的扫描图像使用DeCyder 5.0软件的胶内分析(d ifferential in-gel analysis,D IA)和胶间分析(b iological variation analysis,BVA)模式,结果表明,Cy3和Cy5标记的蛋白质定量结果基本一致,但该染料标记肝癌细胞蛋白后会造成极少量蛋白出现位置偏差,给蛋白定量带来一定的误差影响,而BVA中的反标策略能够有效纠正这种由于不同荧光标记带来的定量误差。总之,本研究首次报道了用同一肝癌样品进行不同荧光标记后进行2DE的评估方法,该方法支持了D IGE体系定量的可靠性,而且能给出定量的误差范围,完善了评估体系,为D IGE技术平台的质量控制提供了参考。     

Structural analysis of the recombinant therapeutic product rFVIII and its PEGylated variants using 2-D DIGE

2-D DIGE is a method that circumvents the gel-to-gel variability inherent in conventional 2-DE and is particularly useful for studying proteome changes in diverse applications such as developmental biology and tissue proteomics. We developed a 2-D DIGE protocol for recombinant factor VIII (rFVIII), a therapeutic protein used for the treatment of hemophilia A. The factor VIII heterodimer is composed of heterogeneous, heavily glycosylated heavy and light chains that are held together by a divalent cation. 2-DE of rFVIII led to a separation of the various fragments whose identity could be determined by Western blot. A comparison of two rFVIII batches by 2-D DIGE revealed their identical composition, whereas an rFVIII variant lacking its central B domain was congruent with the smallest heavy and light chain fragments of rFVIII only. A simpler pattern was obtained upon removal of the terminal sialic acids of rFVIII's glycans, due to a better focusing in the first dimension. 2-D DIGE was also well suited to structurally evaluate various PEGylated rFVIII conjugates. 2-D DIGE thus proved an excellent and straightforward method for structural analysis of rFVIII. Our data suggest that the method could serve as a tool for quality control of very complex pharmaceutically active ingredients.     

Oxidative protein labeling in mass-spectrometry-based proteomics

Oxidation of proteins and peptides is a common phenomenon, and can be employed as a labeling technique for mass-spectrometry-based proteomics. Nonspecific oxidative labeling methods can modify almost any amino acid residue in a protein or only surface-exposed regions. Specific agents may label reactive functional groups in amino acids, primarily cysteine, methionine, tyrosine, and tryptophan. Nonspecific radical intermediates (reactive oxygen, nitrogen, or halogen species) can be produced by chemical, photochemical, electrochemical, or enzymatic methods. More targeted oxidation can be achieved by chemical reagents but also by direct electrochemical oxidation, which opens the way to instrumental labeling methods. Oxidative labeling of amino acids in the context of liquid chromatography(LC)–mass spectrometry (MS) based proteomics allows for differential LC separation, improved MS ionization, and label-specific fragmentation and detection. Oxidation of proteins can create new reactive groups which are useful for secondary, more conventional derivatization reactions with, e.g., fluorescent labels. This review summarizes reactions of oxidizing agents with peptides and proteins, the corresponding methodologies and instrumentation, and the major, innovative applications of oxidative protein labeling described in selected literature from the last decade.     

Microscale solution IEF combined with 2-D DIGE substantially enhances analysis depth of complex proteomes such as mammalian cell and tissue extracts

Current gel-based protein profiling methods such as 2-DE and fluorescent 2-D difference in gel electrophoresis (DIGE) evaluate small portions of complex proteomes. Hence, sample prefractionation is essential for more comprehensive proteome coverage and detection of low-abundant proteins. In this study, we describe the combination of DIGE labeling with microscale solution IEF (MicroSol-IEF) fractionation and subsequent analysis on slightly overlapping narrow pH range 2-D gels. By fluorescently tagging and mixing samples and controls prior to prefractionation, complications resulting from minor run-to-run variations during MicroSol-IEF separations of multiple samples are avoided. This greatly improves the reliability of quantitative comparisons. To illustrate its utility, this 3-D DIGE strategy was applied to analysis of human melanoma cells and mouse lung tissue extracts. Approximately 1000 reproducible spots can be obtained from narrow range 2-D gels of individual MicroSol-IEF fractions, and approximately 6000 spots can be obtained from entire proteomes. Quantitative changes in closely related samples could be more reliably detected and the method has a greatly increased capacity to distinguish between closely related protein isoforms. Thus the 3-D DIGE strategy produces a powerful method for more comprehensive and more reliable quantitative comparisons of protein profiles of very complex proteomes.     

结构蛋白质组学研究进展

蛋白质结构与其生物学功能直接相关，蛋白质功能的调控也主要依赖于其构象和相互作用的动态调节。对蛋白质结构和功能的研究一直是生命科学领域的研究热点，也是当前蛋白质组学研究的重要发展方向。该综述重点讨论了近年来基于质谱的结构蛋白质组学主要分析方法的原理、进展和应用，主要包括非变性质谱法、限制性蛋白质酶切法、化学交联法、氢氘交换法、共价化学标记法、热稳定性分析法等；最后对结构蛋白质组学的发展进行了总结与展望。     

Recent advances in capillary separations for proteomics

The sequencing of several organisms' genomes, including the human's one, has opened the way for the so-called postgenomic era, which is now routinely coined as "proteomics". The most basic task in proteomics remains the detection and identification of proteins from a biological sample, and the most traditional way to achieve this goal consists of protein separations performed by two-dimensional polyacrylamide gel electrophoresis (2-D PAGE). Still, the 2-D PAGE-mass spectrometry (MS) approach remains lacking in proteome coverage (for proteins having extreme isoelectric points or molecular masses as well as for membrane proteins), dynamic range, sensitivity, and throughput. Consequently, considerable efforts have been devoted to the development of non-gel-based proteome separation technologies in an effort to alleviate the shortcomings in 2-D PAGE while reserving the ability to resolve complex protein and peptide mixtures prior to MS analysis. This review focuses on the most recent advances in capillary-based separation techniques, including capillary liquid chromatography, capillary electrophoresis, and capillary electrokinetic chromatography, and combinations of multiples of these mechanisms, along with the coupling of these techniques to MS. Developments in capillary separations capable of providing extremely high resolving power and selective analyte enrichment are particularly highlighted for their roles within the broader context of a state-of-the-art integrated proteome effort. Miniaturized and integrated multidimensional peptide/protein separations using microfluidics are further summarized for their potential applications in high-throughput protein profiling toward biomarker discovery and clinical diagnosis.     

Applications of stable isotope dimethyl labeling in quantitative proteomics

Mass spectrometry has proven to be an indispensable tool for protein identification, characterization, and quantification. Among the possible methods in quantitative proteomics, stable isotope labeling by using reductive dimethylation has emerged as a cost-effective, simple, but powerful method able to compete at any level with the present alternatives. In this review, we briefly introduce experimental and software methods for proteome analysis using dimethyl labeling and provide a comprehensive overview of reported applications in the analysis of (1) differential protein expression, (2) posttranslational modifications, and (3) protein interactions.     

Playing tag with quantitative proteomics

There is steady need for new proteomic strategies on quantitative measurements that provide essential components for detailing dynamic changes in many cellular functions and processes. Stable isotope labeling is a rapidly evolving field, which can be used either after protein extraction with chemical labeling, or in cell culture with metabolic incorporation. In this review, we explore the most frequently utilized quantitation techniques with particular attention paid to chemical labeling using different isotopic tags, including a recent labeling strategy—soluble polymer-based isotopic labeling (SoPIL)—that achieves efficient labeling in homogeneous conditions. Special care should be devoted to the selection of appropriate quantitation approaches according to the needs of the sample and overall experimental design. We evaluate recent advances in quantitative proteomics using stable isotope labeling and their applications to current insightful biological inquiries. Figure Chemical modules of isotopic tags for quantitative proteomics.     

Quantitative proteomics for cancer biomarker discovery

The mass spectrometry (MS)-based quantitative proteomics is powerful to discover disease biomarkers that can provide diagnostic, prognostic and therapeutic targets, and it also can address important problems in clinical and translational medical research. The current status of MS-based quantification strategy and technical advances of several main quantitative assays (two-dimensional (2-D) gel-based methods, stable isotope labeling with amino acids in cell culture (SILAC), isotope-coded affinity tag (ICAT), the isobaric tags for relative and absolute quantification (iTRAQ), 1?O labeling, absolute quantitation and label-free quantitation) have been summarized and reviewed. At present, except 2-D gel-based methods, several stable isotope labeling quantitative techniques, including SILAC, ICAT and iTRAQ, etc, have been widely applied in identification of differential expression of proteins, post-translational modifications and protein-protein interactions in order to look for novel candidate cancer biomarkers from different physiological states of cells, body fluids or tissue samples. Also, the advantages and challenges of different quantitative proteomic approaches are discussed in identification and validation of candidate targets.     

比较蛋白质组学研究中的稳定同位素标记技术

比较蛋白质组学是指在蛋白质组学水平上研究正常和病理情况下细胞或组织中蛋白质表达变化,以期发现具有重要功能的生物标识物,为疾病的早期诊断提供依据。近年来它正成为蛋白质组学研究的热点和发展趋势。比较蛋白质组学的研究方法和策略有多种,本文就最近几年来稳定同位素标记技术(体内代谢标记技术和体外化学标记技术)在比较蛋白质组学研究中的进展进行综述。     

The development of the DIGE system: 2D fluorescence difference gel analysis technology

Two-dimensional (2D) gel electrophoresis is a powerful technique enabling simultaneous visualization of relatively large portions of the proteome. However, the well documented issues of variation and lack of sensitivity and quantitative capabilities of existing labeling reagents, has limited the use of this technique as a quantitative tool. Two-dimensional difference gel electrophoresis (2D DIGE) builds on this technique by adding a highly accurate quantitative dimension. 2D DIGE enables multiple protein extracts to be separated on the same 2D gel. This is made possible by labeling of each extract using spectrally resolvable, size and charge-matched fluorescent dyes known as CyDye DIGE fluors. 2D DIGE involves use of a reference sample, known as an internal standard, which comprises equal amounts of all biological samples in the experiment. Including the internal standard on each gel in the experiment with the individual biological samples means that the abundance of each protein spot on a gel can be measured relative (i.e. as a ratio) to its corresponding spot in the internal standard present on the same gel. Ettan DIGE is the system of technologies that has been optimized to fully benefit from the advantages provided by 2D DIGE.Cy, CyDye, DeCyder, Ettan, ImageMaster and Typhoon are trademarks of Amersham Biosciences Limited. Amersham and Amersham Biosciences are trademarks of Amersham plc.     

Recent liquid chromatographic-(tandem) mass spectrometric applications in proteomics

Conventional proteomics makes use of two-dimensional gel electrophoresis followed by mass spectrometric analysis of tryptic fragments derived from in-gel digestion of proteins. Although being a very strong technique capable of separating and visualizing hundreds of proteins, 2D-gel electrophoresis has some well-documented disadvantages as well. More recently, liquid chromatographic-(tandem) mass spectrometric techniques have been developed to overcome some of the shortcomings of 2D-gel electrophoresis. In this review we have described several recent applications of liquid chromatography-(tandem) mass spectrometry in the field of proteomics and especially in the field of membrane proteomics, quantitative proteomics and in the analysis of post-translational modifications.     

Analysis of Ras-induced oncogenic transformation of NIH-3T3 cells using differential-display 2-DE proteomics

Ras proteins control at least three crucial signalling networks responsible for several cellular processes including anchorage independence, survival, and proliferation. Point mutations in one of the three ras genes are frequent in human tumours. In these tumours, Ras oncoproteins contribute significantly to the malignant phenotype, including deregulation of tumour-cell growth, apoptosis and invasiveness, and the ability to induce angiogenesis. Although significant strides have been made in understanding Ras biology, the collaborative actions of Ras effectors are still poorly understood. Here, we describe a proteomics approach to study global changes in protein expression in Ras-transformed NIH3T3 cells. We exploited 2-D difference gel electrophoresis (DIGE) for pre-separation fluorescent protein labelling with three separate dyes to reduce gel-to-gel variability, to increase sensitivity and dynamic range of protein detection, and to enhance quantification of dysregulated proteins. Proteins dysregulated (> 1.5-fold) by oncogenic Ras transformation reported to be implicated in Ras-regulated pathways include S-methyl-5-thioadenosine phosphorylase, stress-induced-phosphoprotein 1, galectin-1, annexin A7 (synexin), 60S acidic ribosomal protein P0, serine/threonine protein phosphatase type 1 (PP1alpha) and prohibitin. Significantly, we report for the first time the expression of the newly discovered cytokine IL-25 (or IL-17E) in mouse embryonic fibroblast cells and its down-regulation (2.1-fold) upon Ras-induced oncogenic transformation.     

On 3-D graphical representation of proteomics maps and their numerical characterization

We consider numerical characterization of proteomics maps by representing a map as a three-dimensional graphical object based on x, y coordinates of the spots and using their relative abundance as the z coordinate. In our representation the protein spots are first ordered based on their relative abundance and labeled accordingly. In the next step a 3-D path is constructed connecting spots having adjacent labels. Finally a matrix is constructed by assigning to each pairs of labels (i, j) matrix element, the numerical value of which is based on the quotients of the Euclidean distance and the distance along the 3-D zigzag between the two points. The approach has been illustrated on a fragment of a proteomics map and compared with 2-D graphical representation of proteomics maps.     

Recent developments and contributions from Chinese scientists in multidimensional separations for proteomics and traditional Chinese medicines

The most basic task in proteomics remains the detection and identification of proteins from a biological sample, and the most traditional way to achieve this goal consists in protein separations performed by two-dimensional polyacrylamide gel electrophoresis (2-D PAGE). Yet the 2-D PAGE-mass spectrometry (MS) approach has its drawbacks with regard to automation, sensitivity, and throughput. Consequently, considerable effort has been devoted to the development of non-gel-based proteome separation technologies in an effort to alleviate the shortcomings of 2-D PAGE. In addition, traditional Chinese medicines (TCMs), due to their long period of clinical testing and reliable therapeutic efficacy, are attracting increased global attention. However, hundreds or even thousands of components are usually present in TCMs, which results in great difficulties of separation. As a mainstream separation tool, multidimensional liquid separation systems have shown powerful separation ability, high peak capacity, and excellent detectability in the analysis of complex samples including biological samples and TCMs, etc. Therefore, this review emphasizes the most recent advances in multidimensional liquid chromatography and capillary electrophoresis-based separation techniques, and the corresponding applications in proteomics and TCMs. In view of the significant contributions from Chinese scientists, this review focuses mainly on the work of Chinese scientists in the above fields.     

Canonical labels for protein spots of proteomics maps

We consider the problem of canonical labeling for a class of maps, which include proteomics maps, which consist of a set of vertices or protein spots. If this problem is solved and followed, different laboratories studying proteomics maps will arrive at the same numbering of spots, which would facilitate comparisons of data from different sources. In addition, the proposed canonical numberings of protein spots would allow compiling a catalog of proteomics maps just as canonical labeling allows making catalogs graphs, or molecules, and other canonically labeled systems, which would make search for similar sets of maps very efficient. We approach the problem by modifying the algorithm of Jeffrey for graphical representation of DNA based on the chaos game. Graphical representation of DNA as a chaos game map has an important property in that this representation allows one to assign sequential labels to spots in a DNA map. We have modified the approach for sequential labeling of chaos game map representations to graphical representation of any tabular data, such as listing of (x, y) coordinates of protein spots of proteomics maps.     

Mass spectrometry-based structural proteomics

Structural proteomics is the application of protein chemistry and modern mass spectrometric techniques to problems such as the characterization of protein structures and assemblies and the detailed determination of protein-protein interactions. The techniques used in structural proteomics include crosslinking, photoaffinity labeling, limited proteolysis, chemical protein modification and hydrogen/deuterium exchange, all followed by mass spectrometric analysis. None of these methods alone can provide complete structural information, but a "combination" of these complementary approaches can be used to provide enough information for answering important biological questions. Structural proteomics can help to determine, for example, the detailed structure of the interfaces between proteins that may be important drug targets and the interactions between proteins and ligands. In this review, we have tried to provide a brief overview of structural proteomics methodologies, illustrated with examples from our laboratory and from the literature.     

From proteomics to genomics

Presently, science is moving from genomics to proteomics in order to get insight into the functional network of gene expression. Actually however, proteomics is much older than genomics and dates back to the introduction of the two-dimensional gel electrophoresis technique (2-DE) independently by Klose and O'Farrell. Based on this approach almost all cellular proteins can be separated. New developments in mass spectrometry allowed identification of single spots in the 2-DE protein pattern, including the underlying genes. Joachim Klose has focused his pioneering 2-DE studies on mouse models with special emphasis on quantitative protein variants. According to him, proteins are living molecules exhibiting a characteristic protein phenotype.     

基于稳定同位素标记的蛋白质组学定量方法研究进展

定量蛋白质组学已经成为后基因时代的重要研究方向之一。目前该领域的研究主要采用无标记定量方法和稳定同位素标记定量法。其中,基于稳定同位素标记的蛋白质组定量方法发展非常迅速,已为生命科学研究提供了重要的技术支撑。本文分析了基于稳定同位素标记的蛋白质组学定量方法,包括相对定量方法和绝对定量方法,并对其发展进行了展望。     

Dissociation techniques in mass spectrometry-based proteomics

The field of proteomics, the large-scale analysis of proteins, has undergone a huge expansion over the past decade. Mass spectrometry-based proteomics relies on the dissociation of peptide and/or protein ions to provide information on primary sequence and sites of post-translational modifications. Fragmentation techniques include collision-induced dissociation, electron capture dissociation and electron transfer dissociation. Here, we describe each of these techniques and their use in proteomics. The principles, advantages, limitations, and applications are discussed.