Large-scale fabrication of aligned single-walled carbon nanotube array and hierarchical single-walled carbon nanotube assembly

Aligned single-walled carbon nanotubes (SWNTs) and hierarchical SWNT assembly were fabricated by electrospinning. The high fiber elongation and high DC electric field applied during the electrospinning process result in the orientation of the SWNTs along the axial direction of the fiber. The alignment of the electropsun composite fiber transfers this local SWNT orientation to macroscopically aligned SWNTs. After removing the polymer component from the aligned composite fiber, we produced large area aligned SWNTs. The results show that the directional control of SWNT alignment and debundling of SWNTs into individual tubes can be simultaneously realized.     

Atomic Force Microscopic and Electrochemical Investigations of an Electrostatically Fabricated Single‐Wall Carbon Nanotubes Modified Electrode

Single‐wall carbon nanotubes (SWNTs) sub‐monolayer film has been prepared by simply electrostatically adsorbing nanotubes onto a 2‐aminoethanethiol self‐assembled monolayer (SAM) on a gold bead electrode. Tapping‐mode atomic force microscopy (TM‐AFM) is used to characterize the SWNT film, which exhibits that the orientation of SWNTs on the SAM is horizontal and the surface coverage is quite low. The SWNTs modified electrode shows nearly ideal electrochemical response to Fe(CN) /Fe(CN) redox probe. The electrode with such a low SWNTs coverage, however, shows good electrocatalytic behavior to cytochrome c.     

Crystal plane dependent growth of aligned single-walled carbon nanotubes on sapphire

On single-crystal substrates, such as sapphire (alpha-Al 2O 3) and quartz (SiO 2), single-walled carbon nanotubes (SWNTs) align along specific crystallographic axes of the crystal, indicating that the SWNT growth is influenced by the crystal surface. Here, we show that not only the orientation, but also the diameter and chirality of SWNTs are affected by the crystal plane of the sapphire substrate. The aligned SWNTs grown on the A- and R-planes of sapphire have narrower diameter distributions than randomly oriented tubes produced on the C-plane sapphire and amorphous SiO 2. Photoluminescence measurements reveal a striking difference between the aligned SWNTs: near-zigzag tubes are observed on the A-plane and near-armchair tubes on the R-plane. This study shows the route for the diameter and chirality control of SWNTs by surface atomic arrangements of a single-crystal substrate.     

Coronene Encapsulation in Single‐Walled Carbon Nanotubes: Stacked Columns,Peapods, and Nanoribbons

Encapsulation of coronene inside single‐walled carbon nanotubes (SWNTs) was studied under various conditions. Under high vacuum, two main types of molecular encapsulation were observed by using transmission electron microscopy: coronene dimers and molecular stacking columns perpendicular or tilted (45–60°) with regard to the axis of the SWNTs. A relatively small number of short nanoribbons or polymerized coronene molecular chains were observed. However, experiments performed under an argon atmosphere (0.17 MPa) revealed reactions between the coronene molecules and the formation of hydrogen‐terminated graphene nanoribbons. It was also observed that the morphology of the encapsulated products depend on the diameter of the SWNTs. The experimental results are explained by using density functional theory calculations through the energies of the coronene molecules inside the SWNTs, which depend on the orientation of the molecules and the diameter of the tubes.     

Selective interaction of large or charge-transfer aromatic molecules with metallic single-wall carbon nanotubes: critical role of the molecular size and orientation

Using first principles calculations, we report for the first time that large nearly neutral aromatic molecules, such as naphthalene and anthracene, and small charge-transfer aromatic molecules, such as TCNQ and DDQ, interact more strongly with metallic single-wall carbon nanotubes (SWNTs) versus their semiconducting counterparts as the molecular orientation of DDQ is taken into account. Hence two new mechanisms for separating metallic and semiconducting SWNTs via noncovalent pi-pi stacking or charge-transfer interaction are suggested.     

Carbon nanotubes in benzene: internal and external solvation

The structure and dynamics of benzene inside and outside of single-walled carbon nanotubes (SWNTs) in the (n,n) armchair configuration are studied via molecular dynamics computer simulations. Irrespective of the nanotube diameter, benzene molecules form cylindrical solvation shell structures on the outside of the nanotubes. Their molecular planes near the SWNTs in the first external solvation shell are oriented parallel to the nanotube surface, forming a π-stacked structure between the two. By contrast, the benzene distributions in the interior of the SWNTs are found to vary markedly with the nanotube diameter. In the case of the (7,7) and (8,8) nanotubes, internal benzene forms a single-file distribution, either in a vertex-to-vertex (n = 7) or face-to-face (n = 8) orientation between two neighboring molecules. Inside a slightly wider (9,9) nanotube channel, however, a cylindrical single-shell distribution of benzene arises. A secondary solvation structure, which begins to appear inside (10,10), develops into a full structure separate from the first internal solvation shell in (12,12). The ring orientation of internal benzene is generally parallel to the nanotube wall for n = 9-12, while it becomes either slanted with respect to (n = 7), or perpendicular to (n = 8), the nanotube axis. The confinement inside the small nanotube pores exerts a strong influence on the dynamics of benzene. Both translational and rotational dynamics inside SWNTs are slower and more anisotropic than in liquid benzene. It is also found that reorientational dynamics of internal benzene deviate dramatically from the rotational diffusion regime and change substantially with the nanotube diameter.     

Electronic structures and energetics of [5,5] and [9,0] single-walled carbon nanotubes

Standard enthalpies of formation, ionization potentials, electron affinities, and band gaps of finite-length [5,5] armchair and [9,0] zigzag single-walled carbon nanotubes (SWNTs) capped with C(30) hemispheres obtained by halving the C(60) fullerene have been computed at the B3LYP/6-311G* level of theory. Properties of SWNTs are found to depend strongly on the tube length and, in the case of the [9,0] zigzag species, on the relative orientation of the caps. The metallic character of an uncapped infinite-length [5,5] armchair SWNT manifests itself in the oscillatory dependence of the properties of capped finite-length tubes on their size. An infinite-length [9,0] zigzag SWNT is predicted to be a semiconductor rather than a metal irrespective of the presence of caps. The present results underscore the slow convergence of SWNT properties with respect to the tube length and uncover small but significant radial distortions along the long axes of SWNTs.     

Growth of millimeter-long and horizontally aligned single-walled carbon nanotubes on flat substrates

Millimeter-long and well-aligned single-walled carbon nanotubes (SWNTs) have been produced on silica/silicon surfaces using the carbon monoxide chemical vapor deposition (CO-CVD) method. The orientation of the nanotube arrays can be well-controlled by the gas flow during the growth. The majority of the orientated SWNTs are straight and individual. The length of the nanotubes can be >2 mm for a 10 min growth. Furthermore, multidimensional crossed-networks of SWNT can be easily generated by multistep processes. These results present a great opportunity in the controllable production of organized SWNT arrays for large-scale carbon nanotube-based nanodevice fabrication.     

Vertical alignment of single-walled carbon nanotube films formed by electrophoretic deposition

Films of chemically shortened and functionalized single-walled carbon nanotubes (SWNTs) have been formed on a gold electrode by electrophoretic deposition. Applying ultrasonic energy resulted in dramatic changes of the film morphology; the deposited SWNT bundles reassembled and oriented normal to the electrode. Oriented SWNT bundles with high density (more than 250 bundles/microm (2)) not only presented narrow size distributions, but uniformly spread on the electrode. We discuss the mechanism of SWNT orientation by analyzing the variation in the film morphology with ultrasonication time. In addition, we suggest that the 3D displays of AFM images can lead to misjudgment of nanotube alignment. The method for aligning SWNTs normal to the electrode may be competitive with chemical vapor deposition or screen printing, the predominant methods by which vertically aligned SWNT films have been fabricated to date.     

Interaction of a transition metal atom with intrinsic defects in single-walled carbon nanotubes

Interaction of a transition metal atom with defects in single-walled carbon nanotubes (SWNTs) were investigated through density functional theory calculations. For three kinds of intrinsic defects (single vacancies, double vacancies and Stone-Wales defects) in (5,5) armchair and (10,0) zigzag SWNTs, stable configurations were analyzed. The orientation of the specific bonds of the defects is related to the most stable configuration among several possible configurations. The stable adsorption sites and binding energies of a Ni atom on three intrinsic defects were calculated and compared to those on perfect side walls. All defects enhance Ni adsorption, and the single vacancy shows the most exothermic binding. These results shed light on the nature of the interaction of the transition metal with defects in SWNT, an important topic to the many aspects of carbon nanotubes interacting with transition metals. Particularly, this is useful for the fabrication of nanosized transition metal particles supported on carbon nanotubes.     

The effect of catalyst concentration on the synthesis of single-wall carbon nanotubes

Single wall carbon nanotubes (SWNTs) were synthesized by electric arc discharge method with a mixture of nickel and yttrium as catalysts. The effect of the catalyst concentration on the synthesis of SWNTs was studied. Raman spectra of SWNTs have been recorded with excitation wavelengths from 476.5 to 1064 nm. The Raman peaks of the radial breathing modes (RBM) of SWNTs were assigned. The results indicate that the diameter distribution of SWNTs is in the range of 1.2-1.6 nm, and the SWNTs with diameter 1.43 nm are in the majority. The catalyst concentrations have large effect on the yield of SWNTs and little effect on the diameter distribution of SWNTs.     

Photochemical Behavior of Single‐Walled Carbon Nanotubes in the Presence of Propylamine

This report describes the photochemical behavior of single‐walled carbon nanotubes (SWNTs) in the presence of propylamine. The SWNTs are characterized by absorption and Raman spectroscopy. The spectral changes due to photoirradiation indicate that reactions occur predominantly with the metallic SWNTs and small‐diameter SWNTs. The detection of amine radicalcation species by ESR spectroscopy reveals photoinduced electron transfer from the amine to the excited SWNTs. After exposure of the photoirradiated SWNTs to air, the characteristic spectra were recovered, except for that of the small‐diameter SWNTs. The results suggest that, after photoreduction of the SWNTs, subsequent selective sidewall functionalization of the small‐diameter SWNTs occurs.     

Studies of bromine modified single-walled carbon nanotubes using photoelectron spectroscopy and density-functional theory

Many applications based on single-walled carbon nanotubes (SWNTs) require chemical modification of carbon nanotube to optimize the functionalities of the device. In this contribution we discuss the properties of SWNTs immersed in a hydrobromic acid (HBr) solution. Changes of atomic and electronic structures of bromine modified SWNTs were investigated using photoelectron spectroscopy (PES). Spectra of SWNTs before and after immersion in the HBr solution exhibit different features. To understand the mechanism of interaction between SWNTs and bromine, we performed density-functional theory calculations to reveal the structural changes, adsorption energy and chemical bonding information of SWNTs interacting with bromine. In addition, based on the Gelius model, from the molecular orbitals (MOs), we calculated ultraviolet photoelectron spectra (UPS) of SWNTs with and without functionalizing and compared them with the experiment. The present study is a first step in the understanding of the functionalization mechanism of carbon nanotubes.     

Deformation of single‐walled carbon nanotubes by interaction with graphene: A first‐principles study

The interaction between single‐walled carbon nanotubes (SWNTs) and graphene were studied with first‐principles calculations. Both SWNTs and single‐layer graphene (SLG) or double‐layer graphene (DLG) display more remarkable deformations with the increase of SWNT diameter, which implies a stronger interaction between SWNTs and graphene. Besides, in DLG, deformation of the upper‐layer graphene is less than in SLG. Zigzag SWNTs show stronger interactions with SLG than armchair SWNTs, whereas the order is reversed for DLG, which can be interpreted by the mechanical properties of SWNTs and graphene. Density of states and band structures were also studied, and it was found that the interaction between a SWNT and graphene is not strong enough to bring about obvious influence on the electronic structures of SWNTs. © 2015 Wiley Periodicals, Inc.     

Fluorescence derivatization of single-walled carbon nanotubes for analysis by means of conventional CE-LIF

Single-walled carbon nanotubes (SWNTs) are now widely used in many fields, and while many analytical methods for SWNTs have been reported, there are few practical analytical methods that combine the necessary levels of selectivity and sensitivity. We have developed a highly sensitive separation method for fluorescence-derivatized SWNTs by means of conventional CE with laser-induced fluorescence. First, SWNTs were dispersed using a triphenylene derivative into the water, and the excess dispersant was removed by nitric acid treatment. The dispersed SWNTs were then derivatized with a fluorescence reagent, 4-aminofluorescein. Finally, the derivatized SWNTs were analyzed using a conventional apparatus CE-LIF detection. The SWNTs migrated within 20 min. The detection sensitivity of SWNTs was improved by about 170 times with LIF detection as compared with UV detection. We anticipate that the derivatized SWNTs can also be detected with high sensitivity using LC.     

Separation of Semiconducting Single‐Walled Carbon Nanotubes by Using a Long‐Alkyl‐Chain Benzenediazonium Compound

We designed and synthesized 4‐dodecyloxybenzenediazonium tetrafluoroborate ( 1 ), which preferentially reacts with metallic single‐walled carbon nanotubes (SWNTs) by kinetic control. We first determined the suitable experimental conditions for the preferential reaction of 1 with individually dissolved SWNTs by monitoring the decrease in absorbance for the metallic SWNT in the range of 400–650 nm in the absorption spectrum of the SWNTs. The reacted SWNTs were thoroughly rinsed with THF to obtain THF‐insoluble SWNTs. The Raman spectrum of the THF‐insoluble SWNTs showed a strong peak near 180 cm^?1, which corresponds to a semiconducting breathing band. The metallic breathing bands (≈220 cm^?1) and Breit–Wingner–Fano (BWF) modes (1520 cm^?1) corresponding to the metallic SWNTs were much weaker than those of the pristine SWNTs. We also confirmed that metallic peaks in the range of 400–650 nm in the absorption spectrum of THF‐insoluble SWNTs that were individually dissolved in an aqueous micelle of sodium cholate were almost nondetectable. All the results indicate that the THF‐insoluble SWNTs are semiconducting.     

单壁碳纳米管自还原法制备负载Pt催化剂及其催化性能

金属Pt是良好的催化加氢、脱氢催化剂, 利用单壁碳纳米管(SWNTs)自身的还原性, 将K2PtCl6溶液中的Pt直接还原并负载在SWNTs表面上, 制备了具有良好催化性能的SWNTs/Pt负载型催化剂. 通过TEM, XPS和TG对材料进行了表征, 研究了K2PtCl6浓度及溶剂对Pt负载量、粒径的影响, 并测试了SWNTs/Pt的催化性能. 实验结果表明, SWNTs负载的Pt颗粒小, 分散均匀, 负载量高, 与SWNTs结合紧密, 催化性能好, 是催化加氢和脱氢反应的良好催化剂.     

Sidewall functionalization of single-walled carbon nanotubes by addition of dichlorocarbene

We report the sidewall functionalization of soluble HiPco single-walled carbon nanotubes (SWNTs) by addition of dichlorocarbene. The dichlorocarbene-functionalized SWNTs [(s-SWNT)CCl(2)] retain their solubility in organic solvents such as tetrahydrofuran and dichlorobenzene. The degree of dichlorocarbene functionalization was varied between 12% and 23% by using different amounts of the dichlorocarbene precursor. Because the addition of dichlorocarbene saturates the carbon atoms on the sidewall of the SWNTs and effectively replaces the delocalized partial double bonds with a cyclopropane functionality, the optical spectra of the SWNTs change dramatically. We estimate that the saturation of 25% of the pi-network electronic structure of the SWNTs is sufficient to remove all vestiges of the interband transitions in the infrared spectrum. The transitions at the Fermi level in the metallic SWNTs that appear in the far-infrared (FIR) region of the spectrum show a dramatic decrease of intensity on dichlorocarbene functionalization. The FIR region of the spectrum allows a clear differentiation between the covalent and the ionic chemistry of SWNTs. In contrast with covalent functionalization, we show that reaction of the SWNTs with bromine vapor leads to a strong increase in absorptions at the Fermi level that is observable in the FIR due to hole doping of the semiconducting SWNTs. Thermal treatment of the (s-SWNT)CCl(2) above 300 degrees C resulted in the breakage of C-Cl bonds, but did not restore the original electronic structure of the SWNTs.     

Supramolecular hybrid of gold nanoparticles and semiconducting single-walled carbon nanotubes wrapped by a porphyrin-fluorene copolymer

We describe the design, synthesis, and characterization of a supramolecular hybrid of gold nanometals and semiconducting single-walled carbon nanotubes (SWNTs) wrapped by a porphyrin-fluorene copolymer (1), as well as fabrication of a thin-film transistor (TFT) device using the hybrid. Photoluminescence mapping revealed that the copolymer selectively dissolved SWNTs with chirality indices of (8,6), (8,7), (9,7), (7,6), and (7,5); dissolution of (8,6), and (8,7) SWNTs was especially efficient. The solubilized SWNTs were connected to gold nanoparticles (AuNPs) via a coordination bond to prepare a supramolecular hybrid composed of AuNPs/copolymer 1-wrapped SWNTs, which were studied by atomic force and scanning and transmission electron microscopies. A fabricated TFT device using the semiconducting SWNTs/copolymer 1 shows evident p-type transport with an On/Off ratio of ~10(5). The transport properties of the TFT changed after coordination of the AuNPs with the SWNTs/copolymer 1.     

Preferential growth of single-walled carbon nanotubes on silica spheres by chemical vapor deposition

The preferential growth of single-walled carbon nanotubes (SWNTs) on silica spheres with various diameters was realized for the first time by chemical vapor deposition (CVD) of methane. SWNTs tend to wrap the silica spheres to form a new superstructure of uniform SWNT nanoclaws when the diameters of the silica spheres are larger than 400 nm. The SWNTs obtained on silica spheres have highly graphitic tubular walls as characterized by Raman spectroscopy and HRTEM. This is a new method to obtain tunable uniform elastic deformation of SWNTs, which may act as the model for the study about the effect of delocalized bending on the properties of SWNTs. In addition, the combination of SWNTs with monodispersed silica spheres could conveniently integrate SWNTs into photonic crystals.