Aggregation behavior of aqueous solutions of ionic liquids

The aggregation behavior in aqueous solutions of three ionic liquids based on the 1-alkyl-3-methylimidazolium cation has been investigated by means of surface tension, conductivity, and small-angle neutron scattering (SANS) measurements. From analysis of the SANS data, models for the shapes and sizes of aggregates have been proposed: the short-chain 1-butyl-3-methylimidazolium tetrafluoroborate [C4mim] [BF4] system can be best modeled by treating it as a dispersion of polydisperse spherical aggregates that form above a critical aggregation concentration, whereas the 1-octyl-3-methylimidazolium iodide, [C8mim] [I], solutions can be modeled as a system of regularly sized near-spherical charged micelles that form above a critical micelle concentration. Solutions of 1-octyl-3-methylimidazolium chloride, [C8mim]-[Cl], display weak long-range ordering of possibly disklike particles culminating in the formation of structures with distinct long-range order at higher concentrations.     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

Effect of additives on the surface active and morphological features of 1-octyl-3-methylimidazolium halide aggregates in aqueous media

The influence of two salts as additives namely sodium chloride and sodium sulphate and a nonelectrolyte, 2-butoxyethanol on surface chemical and aggregation characteristics of ionic liquids (IL) of 1-octyl-3-methylimidazolium chloride, [C₈mim][Cl], 1-octyl-3-methylimidazolium bromide, [C₈mim][Br], and 1-octyl-3-methylimidazolium iodide, [C₈mim][I] in aqueous media were monitored through surface tension and small angle neutron scattering measurements. The addition of salts drastically decreased the critical aggregation concentration (CAC) and increased the area per adsorbed IL molecule. The co-ions of salts modify the surface of IL molecules and aggregates through various interactions such as charge neutralization, specific interactions and dehydration The results obtained by analyzing the SANS curves in the whole Q range showed that the oblate ellipsoidal shape of the aggregates of ionic liquids is un-altered upon the addition of additives. However the additives facilitate the growth of the aggregates in to microstructures with cubic packing at high salt concentrations.     

Aggregation behavior of ionic liquids in aqueous solutions: effect of alkyl chain length, cations, and anions

Self aggregation of the ionic liquids, 1-butyl-3-methylimidazolium chloride [C4mim][Cl], 3-methyl-1-octylimidazolium chloride [C8mim][Cl], 1-butyl-3-methylimidazolium tetrafluoroborate [C4mim][BF4], N-butyl-3-methylpyridinium chloride [C4mpy][Cl], in aqueous solution has been investigated through 1H nuclear magnetic resonance (NMR) and steady-state fluorescence spectroscopy. Aggregation properties were determined by application of mass action theory to the concentration dependence of 1H NMR chemical shifts. Aggregation properties showed fairly good agreement with the previously reported results obtained from small angle neutron scattering, conductivity, and surface tension measurements. A detailed analysis of chemical shifts of water and various protons in ILs has been employed to probe the aggregate structure. Fluorescence spectroscopy provided important information about the critical aggregation concentration (cac) and the microenvironment of the aggregates. We could also observe a break point quite consistent with that of 1H NMR and fluorescence spectroscopy at cac from the concentration dependence of refractive index measurements. Standard free energies of aggregation DeltaGom of various ILs derived using the refractive index/concentration profiles were found comparable to those of classical ionic surfactants.     

Separation of ternary systems of hydrophilic ionic liquid with miscible organic compounds by RPLC with refractive index detection

A rapid and simple analytical method was developed for the simultaneous and quantitative determination and separation of hydrophilic imidazolium ionic liquids (ILs) (1-butyl-3-methylimidazolium chloride, [C(4)mim]Cl; 1-hexyl-3-methylimidazolium chloride, [C(6)mim]Cl; 1-octyl-3-methylimidazolium chloride, [C(8)mim]Cl; 1-allyl-3-methylimidazolium chloride, [Amim]Cl; or 1-allyl-3-methylimidazolium bromide, [Amim]Br) with miscible ethyl acetate and EtOH and their mixtures using reverse phase liquid chromatography coupled with refractive index detection (RPLC-RI). The influence of 60 to 100% (volume percentage) methanol in the mobile phase on the IL systems ([C(4)mim]Cl, [C(6)mim]Cl, [C(8)mim]Cl, [Amim]Br, or [Amim]Cl)-ethyl acetate-EtOH was investigated. The optimum mobile phase for the system [C(8)mim]Cl-ethyl acetate-EtOH, [C(4)mim]Cl-ethyl acetate-EtOH, [Amim]Br-ethyl acetate-EtOH and [Amim]Cl-ethyl acetate-EtOH was methanol/water (60:40, v/v), and methanol/water (70:30, v/v) for [C(6)mim]Cl-ethyl acetate-EtOH. Under optimum mobile phase conditions for each system, the RSD of the retention time ranged from 0.02 to 0.04%, and the RSDs of the peak area percent ranged from 0.23 to 1.85%, which showed good reproducibility of the RPLC-RI method. The RPLC-RI method can determine IL, ethyl acetate, and EtOH simultaneously in 5 min, and the analytes, especially IL, can be eluted completely. The results show that the RPLC-RI method can be used to separate and determine ILs in mixtures with organic compounds simultaneously and quantitatively.     

Effect of anionic structure on the phase formation and hydrophobicity of amino acid ionic liquids aqueous two-phase systems

Compared with the conventional ionic liquids, amino acid ionic liquids are more biodegradable and biocompatible, and can enhance stability of biomaterials. In this work, amino acid ionic liquids 1-butyl-3-methylimidazolium L-serine ([C(4)mim][Ser]), 1-butyl-3-methylimidazolium glycine ([C(4)mim][Gly]), 1-butyl-3-methylimidazolium L-alanine ([C(4)mim][Ala]) and 1-butyl-3-methylimidazolium L-leucine ([C(4)mim][Leu]) have been synthesized. These ionic liquids are found to form aqueous two-phase systems (ATPSs) by the salted-out of K(3)PO(4) in aqueous solutions. Phase diagram of the ATPSs and the Gibbs energies of transfer of methylene group from the bottom salt-rich phase to the top ionic liquid-rich phase have been determined at 298.15K and pH 14, and the effect of anionic structure of the ionic liquids on phase formation of the ATPSs and the relative hydrophobicity between the top and the bottom phases are then examined. In order to understand the effect of relative hydrophobicity of the phases in equilibrium in the ATPSs on the extraction/separation capability of biomolecules, the partition coefficients of cytochrome-c (as a model biomolecule) in the ATPSs are measured by spectrophotometry. It is suggested that hydrophobic interactions are mainly responsible for the higher partition coefficients of cytochrome-c in aqueous two-phase systems at pH 14, and the extraction and separation capacity of biomolecules can be improved by the modulation of the relative hydrophobicity of the phases and/or the pH of the system.     

Nanostructural organization in ionic liquids

Nanometer-scale structuring in room-temperature ionic liquids is observed using molecular simulation. The ionic liquids studied belong to the 1-alkyl-3-methylimidazolium family with hexafluorophosphate or with bis(trifluoromethanesulfonyl)amide as the anions, [C(n)mim][PF(6)] or [C(n)mim][(CF(3)SO(2))(2)N], respectively. They were represented, for the first time in a simulation study focusing on long-range structures, by an all-atom force field of the AMBER/OPLS_AA family containing parameters developed specifically for these compounds. For ionic liquids with alkyl side chains longer than or equal to C(4), aggregation of the alkyl chains in nonpolar domains is observed. These domains permeate a tridimensional network of ionic channels formed by anions and by the imidazolium rings of the cations. The nanostructures can be visualized in a conspicuous way simply by color coding the two types of domains (in this work, we chose red = polar and green = nonpolar). As the length of the alkyl chain increases, the nonpolar domains become larger and more connected and cause swelling of the ionic network, in a manner analogous to systems exhibiting microphase separation. The consequences of these nanostructural features on the properties of the ionic liquids are analyzed.     

The ionic parachor and predicting properties of amino acid ionic liquid homologues of 1-alkyl-3-methylimidazolium glycine

The amino acid ionic liquids(AAILs) [C3mim][Gly](1-propyl-3-methylimidazolium glycine) and [C4mim][Gly](1-butyl-3methylimidazolium glycine) have been prepared by the neutralization method and characterized by 1 H NMR spectroscopy and differential scanning calorimetry(DSC).The values of their density,surface tension and refractive index were measured at(298.15 ± 0.05) K.Since the AAILs can form strong hydrogen bonds with water,small amounts of water are difficult to remove from the AAILs by common methods.In order to eliminate the effect of the impurity water,the standard addition method(SAM) was applied to these measurements.A new concept which is called the ionic parachor has been put forward.The [C n mim] + cations were treated as a group of reference ions and the individual values of their ionic parachor were evaluated in terms of an extrathermodynamic assumption.Then,using the values of the ionic parachor of reference ions,the parachor,surface tension γ and refractive index n D of the ionic liquids investigated in this work were estimated.The estimated values correlate quite well with the corresponding experimental values.     

Solvation of carbohydrates in n,n'-dialkylimidazolium ionic liquids: a multinuclear NMR spectroscopy study

The solvation of carbohydrates in N, N'-dialkylimidazolium ionic liquids (ILs) was investigated by means of 13C and 35/37Cl NMR relaxation and 1H pulsed field gradient stimulated echo (PFG-STE) diffusion measurements. Solutions of model sugars in 1- n-butyl-3-methylimidazolium chloride ([C4mim]Cl), 1-allyl-3-methylimidazolium chloride ([CC2mim]Cl), and 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]) were studied to evaluate the effects of cation and anion structure on the solvation mechanism. In all cases, the changes in the relaxation times of carbon nuclei of the IL cations as a function of carbohydrate concentration are small and consistent with the variation in solution viscosities. Conversely, the 35/37Cl and 13C relaxation rates of chloride ions and acetate ion carbons, respectively, have a strong dependency on sugar content. For [C2mim][OAc], the correlation times estimated from 13C relaxation data for both ions reveal that, as the carbohydrate concentration increases, the reorientation rate of the anion decreases faster than that of the cation. Although not as marked as the variations observed in the relaxation data, similar trends were obtained from the analysis of cation and, in the case of [C2mim][OAc], anion self-diffusion coefficients of the sugar/IL systems. Our results show that the interactions between the IL cation and the solutes are nonspecific, confirm that the process is governed by the interactions between the IL anion and the carbohydrate, and, more importantly, indicate no change in the solvation mechanism regardless of the structure of the anion.     

Analysis of phthalates via HPLC-UV in environmental water samples after concentration by solid-phase extraction using ionic liquid mixed hemimicelles

Ionic liquid mixed hemimicelles-based solid-phase extraction for the preconcentration of five phthalates in environmental water sample was investigated in this paper. A comparative study on the use of room temperature ionic liquids (RTILs) 1-hexyl-3-methylimidazolium bromide ([C(6)mim]Br) and 1-dodecyl-3-methylimidazolium bromide ([C(12)mim]Br)-coated silica as sorbents was presented. Owing to having bigger adsorption amounts for analytes [C(12)mim], Br-coated silica was selected as SPE material and the five analytes di-ethyl-phthalate (DEP), di-n-propyl-phthalate (DnPP), di-n-butyl-phthalate (DnBP), di-cyclohexyl-phthalate (DcHP) and di-(2-ethylhexyl)-phthalate (DEHP) can be quantitatively extracted under optimal conditions. The analytes retained on the cartridge were desorbed completely with 3mL methanol (pH 2). Predominant factors influencing the extraction efficiency, such as RTILs concentration, pH value, ionic strength and breakthrough volume were discussed. The proposed method had been applied to determining the five phthalates in four environmental water samples and concentration factor of 600 was achieved easily. Detection limits obtained ranged between 0.12 and 0.17mug/L. The accuracy of this method was evaluated by recovery measurement on spiked samples, and good recovery results (85-107%) with relative standard deviation (R.S.D.) of below 6% were achieved.     

Comparison of physicochemical properties of new ionic liquids based on imidazolium, quaternary ammonium, and guanidinium cations

More than 50 ionic liquids were prepared by using imidazolium, quaternary ammonium, and guanidinium cations and various anions. In these series, different cationic structures such as 1-benzyl-3-methylimidazolium [Bzmim]+, 1,3-dibenzylimidazolium [BzmiBz]+, 1-octyl-3-methylimidazolium [C8mim]+, 1-decyl-3-methylimidazolium [C10mim]+, tricapryl-methylammonium [Aliquat]+, benzyltriethylammonium [BzTEA]+, phenyltrimethylammonium [PhTMA]+, and dimethyldihexylguanidinium [DMG]+ were combined with anions, p-toluenesulfonate [TSA](-), dicyanoamide [DCA]-, saccharine (2-sulfobenzoic acid imide sodium salt) [SAC]-, trifluoroacetate [TFA]-, bis(trifluoromethanesulfonyl)imide [Tf2N]-, trifluoromethanesulfonate [TfO]-, and thiocyanate [SCN]-. Important physical data for these ionic liquids are collated, namely solubility in common solvents, viscosity, density, melting point and water content. Apart from the viscosity, the Newtonian and non-Newtonian behavior of these ionic liquids is also disclosed. Stability of these ionic liquids under thermal, basic, acidic, nucleophilic, and oxidative conditions was also studied. The features of the solid-liquid phase transition were analyzed, namely the glass transition temperature and the heat capacity jump associated with the transition from the non-equilibrium glass to the metastable supercooled liquid. A degradation temperature of each ionic liquid was also determined. Comparisons of the properties of various ionic liquids were made.     

Facile in situ synthesis of nanofluids based on ionic liquids and copper oxide clusters and nanoparticles

Two stable nanofluids comprising of mixed valent copper(I,II) oxide clusters (<1 nm) suspended in 1-butyl-3-methylimidazolium acetate, [C(4)mim][OAc], and copper(II) oxide nanoparticles (<50 nm) suspended in trioctyl(dodecyl)phosphonium acetate, [P(8 8 8 12)][OAc], were synthesised in a facile one-pot reaction from solutions of copper(II) acetate hydrate in the corresponding ionic liquids. Formation of the nanostructures was studied using (13)C NMR spectroscopy and differential scanning calorimetry (DSC). From a solution of Cu(OAc)(2) in 1-ethyl-3-methylimidazolium acetate, [C(2)mim][OAc], crystals were obtained that revealed the structure of [C(2)mim][Cu(3)(OAc)(5)(OH)(2)(H(2)O)]·H(2)O, indicating the formation of copper hydroxo-clusters in the course of the reaction. Synthesised nanostructures were studied using transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Physical properties of the prepared IL-nanofluids were examined using IR and UV-VIS spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and densitometry.     

Carbon-based ionogels: tuning the properties of the ionic liquid via carbon-ionic liquid interaction

The behavior of two ionic liquids (ILs), 1-ethyl-3-methylimidazolium dicyanamide [Emim][DCA] and 1-ethyl-3-methylimidazolium triflate [Emim][TfO], in (meso)porous carbonaceous hosts was investigated. Prior to IL incorporation into the host, the carbon matrix was thermally annealed between 180 and 900 °C to control carbon condensation and surface chemistry. The resulting materials have an increasing "graphitic" carbon character with increasing treatment temperature, reflected in a modified behavior of the ILs when impregnated into the carbon host. The two ILs show significant changes in the thermal behavior as measured from differential scanning calorimetry; these changes can be assigned to anion-π interaction between the IL anions and the pore wall surfaces of these flexible carbonaceous support materials.     

甘氨酸离子液体[C3mim][Gly]和[C4mim][Gly]水溶液的表面张力

本文用中和法合成了基于烷基咪唑的甘氨酸离子液体[C3mim][Gly]（1-丙基-3-甲基咪唑甘氨酸离子液体）和[c4miml[Gly]（1-丁基-3．甲基咪唑甘氨酸离子液体）,在298．15K下,0．0400-0．5000molkg^-1浓度范围内测定了不同浓度[C4mim][Oly]和[c3mim][Gly]离子液体水溶液的密度和表面张力,得到了溶液等张比容的实验值,提出了预测不同浓度溶液等张比容的经验方程,利用这个经验方程和李以圭等人提出的溶液表面张力模型,分别估算了这两种离子液体水溶液的表面张力,其估算值和实验值在误差范围内很好地吻合．     

Raman and ab initio studies of simple and binary 1-alkyl-3-methylimidazolium ionic liquids

Raman spectra of the ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([C4mim][PF6]), 1-hexyl-3-methylimidazolium chloride ([C6mim]Cl), and 1-hexyl-3-methylimidazolium hexafluorophosphate ([C6mim][PF6]), and binary mixtures thereof, have been assigned using ab initio MP2 calculations. The previously reported anti and gauche forms of the [C4mim]+ cation have been observed, and this study reveals this to be a general feature of the long-chain 1-alkyl derivatives. Analysis of mixtures of [C6mim]Cl and [C6mim][PF6] has provided information on the nature of the hydrogen bonding between the imidazolium headgroup and the anions, and the invariance of the essentially 50:50 mixture of the predominant conformers informs on the nature of glass formation in these systems.     

Room temperature ionic liquid as a novel medium for liquid/liquid extraction of metal ions

Room temperature ionic liquids (RTILs) have been used as novel solvents to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. The hydrophobic character and water immiscibility of certain ionic liquids allow their use in solvent extraction of hydrophobic compounds. In this work, a typical room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent to study liquid/liquid extraction of heavy metal ions. Dithizone was employed as a metal chelator to form neutral metal-dithizone complexes with heavy metal ions to extract metal ions from aqueous solution into [C₄mim][PF₆]. This extraction is possible due to the high distribution ratios of the metal complexes between [C₄mim][PF₆] and aqueous phase. Since the distribution ratios of metal dithiozonates between [C₄mim][PF₆] and aqueous phase are strongly pH dependent, the extraction efficiencies of metal complexes can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation, and preconcentraction of heavy metal ions with the biphasic system of [C₄mim][PF₆] and aqueous phase can be achieved by controlling the pH value of the extraction system. Preliminary results indicate that the use of [C₄mim][PF₆] as an alternate solvent to replace traditional organic solvents in liquid/liquid extraction of heavy metal ions is very promising.     

Interactions of 1-butyl-3-methylimidazolium carboxylate ionic liquids with glucose in water: a study of volumetric properties, viscosity, conductivity and NMR

Extensive applications of ionic liquids (ILs) may result in their accumulation in the ecological environment and organisms. Although ILs are popularly called "green solvents", their toxicity, in fact, has been exhibited. Therefore the interaction of ILs with biomolecules is a cutting-edge research subject. Herein, the interactions of 1-butyl-3-methylimidazolium carboxylate ionic liquids ([C(4)mim][HCOO], [C(4)mim][CH(3)COO] and [C(4)mim][CH(3)CH(2)COO]) with glucose in water were studied for their volumetric properties, viscosity, conductivity and NMR spectra. Limiting apparent molar volumes (V(Φ, IL)(0)), viscosity B-coefficients, limiting molar conductivities (Λ(0)) and Walden products (Λ(0)η(0)) were evaluated for the ILs in glucose + water solutions. Volumetric interaction parameters were also obtained from the transfer volumes of the ionic liquids. The contributions of the solvent properties (B(1)) and the ionic liquid-solvent interactions (B(2)) to the B-coefficient were extracted, together with molar activation energies (Δμ(IL)(0≠)) of the ionic liquids for viscous flow of the aqueous glucose + IL solution. In addition, the (13)C and (1)H NMR spectra of methyl β-D-glucopyranoside and ILs in β-D-glucopyranoside + IL + D(2)O were studied. The NMR results show that no special and strong interactions were observed between glucopyranoside and the ILs. However, it was confirmed that the H2 on the imidazolium ring has more activity (acidity) than atoms H4 and H5. The macro-properties and their changes were also discussed in terms of the size, structure and solvation of the ILs and glucose.     

Influence of the Cation on the Solubility of CO<Subscript>2</Subscript> and H<Subscript>2</Subscript> in Ionic Liquids Based on the Bis(trifluoromethylsulfonyl)imide Anion

Experimental values for the solubility of carbon dioxide and hydrogen in three room temperature ionic liquids based on the same anion—(bistrifluoromethylsulfonyl)imide [Ntf₂]—and three different cations—1-butyl-3-methylimidazolium, [C₄mim], 1-ethyl-3-methylimidazolium, [C₂mim] and trimethyl-butylammonium, [N₄₁₁₁]—are reported between 283 and 343 K and close to atmospheric pressure. Carbon dioxide, with a mole-fraction solubility of the order of 10⁻², is two orders of magnitude more soluble than hydrogen. The solubility of CO₂ is very similar in the three ionic liquids although slightly lower in the presence of the [C₂mim] cation. In the case of H₂, noticeable differences were observed with larger mole fraction solubilities in the presence of [N₄₁₁₁] followed by [C₄mim]. All of the mole-fraction solubilities decrease with increasing temperature. From the variation of Henry’s law constants with temperature, the thermodynamic functions of solvation were calculated. The precision of the experimental data, considered as the average absolute deviation of the Henry’s law constants from appropriate smoothing equations, is always better than ±1%.     

Ideal gas solubilities and solubility selectivities in a binary mixture of room-temperature ionic liquids

This study focuses on the solubility behaviors of CO2, CH4, and N2 gases in binary mixtures of imidazolium-based room-temperature ionic liquids (RTILs) using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][Tf2N]) and 1-ethyl-3-methylimidazolium tetrafluoroborate ([C2mim][BF4]) at 40 degrees C and low pressures (approximately 1 atm). The mixtures tested were 0, 25, 50, 75, 90, 95, and 100 mol % [C2mim][BF4] in [C2mim][Tf2N]. Results show that regular solution theory (RST) can be used to describe the gas solubility and selectivity behaviors in RTIL mixtures using an average mixture solubility parameter or an average measured mixture molar volume. Interestingly, the solubility selectivity, defined as the ratio of gas mole fractions in the RTIL mixture, of CO2 with N2 or CH4 in pure [C2mim][BF4] can be enhanced by adding 5 mol % [C2mim][Tf2N].     

Ionic liquids as a convenient new medium for the catalytic asymmetric dihydroxylation of olefins using a recoverable and reusable osmium/ligand

The use of room-temperature ionic liquids (RTILs) in the Sharpless catalytic asymmetric dihydroxylation (AD) as a cosolvent or replacement of the tert-butanol was studied in detail by screening 11 different RTILs. The AD reaction is faster in 1-n-butyl-3-methylimidazolium hexafluorophosphate [C(4)mim][PF(6)] as a cosolvent than in the conventional system of tert-butanol/H(2)O. For the range of six substrates tested, comparable or even higher yields and enantiomeric excess (ee) were found using [C(4)mim][PF(6)] or 1-n-octyl-3-methylimidazolium hexafluorophosphate [C(8)mim][PF(6)] compared to the conventional solvent system. Due to high affinity of the catalytic osmium/quiral ligand system to the ionic liquid, the use of ionic liquid/water (biphasic) or ionic liquid/water/tert-butanol (monophasic) solvent systems provides a recoverable, reusable, robust, efficient, and simple system for the AD reaction. Using 1-hexene and [C(4)mim][PF(6)] as RTIL it was possible to reuse the catalytic system for 9 cycles with only a 5% of yield reduction from the first cycle, allowing an overall yield of 87%, TON = 1566, and with similar ee. Additionally, for each cycle, after extraction of the reaction mixture with diethyl ether, the osmium content in the organic phase (containing the AD product) and in the aqueous phase was in the range of the detection limit (相似文献