Repeated buckling and its influence on the geometrical imperfections of stiffened cylindrical shells under combined loading

The present experimental study aims at providing better inputs for improvement of the buckling load predictions of stiffened cylindrical shells subjected to combined loading. The work focuses on two main factors which considerably affect the combined buckling load of stiffened shells, namely geometric imperfections and boundary conditions. Six shells with nominal simple supports were tested under various combinations of axial compression and external pressure. The vibration correlation technique is employed to define the real boundary conditions. The geometric imperfections of the integrally stiffened shells are measured in the present experiments in situ and are used as inputs to a multimode analysis which yields the corresponding “knockdown” factor for various combinations of loading. Thus, when employing the repeated buckling procedure for obtaining interaction curves, each point on the curve is adjusted (using the multimode analysis) for the measured “new” surface of the shell and this results in more realistic interaction curves. The geometrical imperfections of the preloaded shells can also serve as an input to the International Imperfection Data Bank for future studies on the correlation between the manufacturing method of the shell and their geometric imperfections.     

Buckling of unstiffened conical shells under combined loading

An experimental program was conducted in order to determine the family of interaction curves for the buckling of unstiffened conical shells under combined axial compression, torsion, and external or internal pressure. Careful experimental technique permitted many repeated buckling tests on the same aluminumalloy shell without noticeable damage and yielded reliable interaction curves. Results of combined-loading tests are presented and compared with linear theory. Test results show that the interaction curve for compression-torsion-pressure loading is defined by superposition of compression-pressure, torsion-pressure and compression-torsion behavior.     

轴向瞬间阶梯载荷下圆柱壳动力屈曲的双特征参数分析

对于轴向瞬间阶梯载荷下圆柱壳的弹性非轴对称动力屈曲问题，将临界应力和屈曲惯性项指数参数作为双特征参数求解。由能量转换和守恒准则，导出压缩波阵面上的屈曲变形附加约束条件。失稳控制方程、边界条件和波阵面上的连续条件，连同此附加约束条件构成求解两个特征参数和动力失稳模态的完备定解条件。由伽辽金法得出求解双特征参数问题的数值方法。     

Thermomechanical postbuckling of composite laminated cylindrical shells with local geometric imperfections

The effect of local geometric imperfections on the buckling and postbuckling of composite laminated cylindrical shells subjected to combined axial compression and uniform temperature loading was investigated. The two cases of compressive postbuckling of initially heated shells and of thermal postbuckling of initially compressed shells are considered. The formulations are based on a boundary layer theory of shell buckling, which includes the effects of the nonlinear prebuckling deformation, the nonlinear large deflection in the postbuckling range and the initial geometric imperfection of the shell. The analysis uses a singular perturbation technique to determine buckling loads and postbuckling equilibrium paths. Numerical examples are presented that relate to the performances of cross-ply laminated cylindrical shells with or without initial local imperfections, from which results for isotropic cylindrical shells follow as a limiting case. Typical results are presented in dimensionless graphical form for different parameters and loading conditions.     

圆柱薄壳的动相变屈曲行为

利用MTS809材料试验机对TiNi圆柱薄壳进行了轴向动渐进相变屈曲实验,对轴向冲击下处于伪弹性状态的TiNi合金柱壳的动相变屈曲行为进行了数值模拟研究。结果表明,不同的加载强度将会激发出柱壳不同的动屈曲响应模态。当冲击速度较高时,柱壳两端首先形成轴对称环形相变屈曲波纹,并产生应力平台;随着马氏体含量不断增加,环形相变屈曲波纹逐渐贯穿整个壳体,名义应力缓慢抬升;当名义应变超过一定阈值时,对称环形屈曲模态突变为非轴对称块状屈曲模态,名义应力大幅下降。撞击速度为40 m/s的算例（含10％随机缺陷）与S.Nemat-Nasser等的实验结果很好吻合,说明本文中计算模型、方法和结果的有效性经过了实验的考核。结果还表明,相变耗能是TiNi柱壳吸收冲击能量的主要机制,适合制作可重复使用的高效吸能元件,并给出了相应的理想厚径比。     

Twin-characteristic-parameter solution of axisymmetric dynamic plastic buckling for cylindrical shells under axial compression waves

In the present investigation on the dynamic plastic buckling of cylindrical shells under axial compression waves, the critical axial stress and the exponential parameter of inertia terms in stability equations are treated as a couple of characteristic parameters. The criterion of transformation and conservation of energy in the process of buckling initiation is used to derive the supplementary restraint equation of buckling deformation at the fronts of axial elastic and plastic compression waves. The supplementary restraint equation, stability equations, boundary conditions and continuity conditions constitute the necessary and sufficient conditions of determining the two characteristic parameters. Two characteristic equations are derived for the two characteristic parameters. The critical axial stress or the critical buckling time, the exponential parameter of inertia terms and the initial modes of buckling deformation are calculated quantitatively from the solution of the characteristic equations.     

Torsional,flexural, and torsional-flexural buckling modes of a cylindrical shell under combined loading

Stability problems for cylindrical shells under various loading modes were considered in numerous papers. A detailed analysis of such problems can be found, e.g., in the monograph [1]. We refer to the solutions presented in this monograph as classical.For long cylindrical shells in axial compression, one of the buckling modes is the purely beam flexural mode similar to the classical buckling mode of a straight rod. It is well known that it can be studied by using the nonlinear or linearized equations of the membrane theory of shells. In [2], it was shown that, on the basis of such equations constructed starting from the noncontradictory version of geometrically nonlinear elasticity relations in the quadratic approximation [3], under the separate action of the axial compression, external pressure, and torsion, there are also previously unknown nonclassical buckling modes, most of which are shear ones.In the present paper, we show that the use of the above equations for cylindrical shells under compression and external pressure with simultaneous pure torsion or bending permits revealing the earlier unknown torsional, beam flexural, and beam torsional-flexural buckling modes, which are nonclassical, just as those found in [2]. The second of these buckling modes is realized when axially compressing forces are formed in the shell with simultaneous torsion, and the third of them is realized under compression combined with pure bending.It was found that, earlier than the classical buckling modes, the torsional buckling modes can be realized for relatively short shells with small shear rigidity in the tangent plane, while the second and third buckling modes can be realized for relatively long shells.     

On buckling of axisymmetric thin elastic-plastic shells

A buckling criterion for shells with an axisymmetric middle surface and subjected to edge loads and hydrostatic surface pressure loading is formulated starting from Hill's three-dimensional continuum theory for uniqueness of deformation of inelastic solids. It turns out that a physically consistent two-dimensional set of equations may be derived for a quite general class of strain-hardening elastic-plastic solids, the only essential restriction being that of a smooth yield function. The intrinsic errors inherent in the derived rate equations, being an integral part of an eigenvalue problem, are discussed in relation to a circular cylinder under axial compression. Analytical results are given which illustrate the influence of the constitutive properties and the boundary contraints on the magnitude of the critical load.     

Stability and limit states of elastoplastic spherical shells under static and dynamic loading

The problem of elastoplastic deformation, buckling, and postcritical behavior of spherical shells is solved using a finite element method and a cross-type explicit scheme of time integration. Stability problems for hemispherical shells under external pressure and compression between rigid plates are considered. The influence of holes and boundary conditions on shell deformation is investigated. It is shown that the calculation results are in good agreement with experimental data.     

Buckling and Postbuckling of Laminated Thin Cylindrical Shells under Hygrothermal Environments

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ,ｆｉｂｅｒ＿ｒｅｉｎｆｏｒｃｅｄｃｏｍｐｏｓｉｔｅｌａｍｉｎａｔｅｄｓｈｅｌｌｓｔｒｕｃｔｕｒｅｓａｒｅｗｉｄｅｌｙｕｓｅｄｉｎｔｈｅａｅｒｏｓｐａｃｅ ,ｍａｒｉｎｅｉｎｄｕｓｔｒｙ ,ａｕｔｏｍｏｂｉｌｅｉｎｄｕｓｔｒｙａｎｄｏｔｈｅｒｅｎｇｉｎｅｅｒｉｎｇａｐｐｌｉｃａｔｉｏｎｓ.Ｄｕｒｉｎｇｔｈｅｏｐｅｒａｔｉｏｎａｌｌｉｆｅ ,ｔｈｅｖａｒｉａｎｃｅｏｆｔｅｍｐｅｒａｔｕｒｅａｎｄｍｏｉｓｔｕｒｅｒｅｄｕｃｅｓｔｈｅｅｌａｓｔｉｃｍｏｄｕｌｉ…     

Stability of Laminated Shells Made of Materials with one Plane of Elastic Symmetry

The paper sets forth a technique, based on the Kirchhoff–Love theory of shells, for solving stability problems for thin-walled laminated shells of revolution made of an anisotropic material with one plane of elastic symmetry. The resolving system of differential equations is of the 16th order since the symmetric and asymmetric buckling modes are coupled. The results from a stability analysis of cylindrical shells made of carbon plastics and subjected to compression are analyzed against the angle of the principal directions of elasticity. The influence of boundary conditions is studied. The error due to neglecting the coupling of buckling modes is estimated     

Delamination growth of laminated composite cylindrical shells

The local buckling may occur in delaminated cylindrical shells under axial compression. This often causes delamination growth and structure failure. Based on the variational principle of moving boundary, in this paper, the postbuckling governing equations for the laminated cylindrical shells are derived, and the corresponding boundary and matching conditions are given. At the same time, according to the Griffith criterion, the formulas of energy release rate along the delamination front are obtained and the delamination growth is studied. In the numerical calculation, the delamination growth of axisymmetrical laminated cylindrical shells is analyzed, and the effects of delamination sizes and depths, the boundary conditions, the material properties and the laminate stacking sequences on delamination growth are discussed.     

热环境中功能梯度圆柱薄壳分岔屈曲的边界约束效应

基于前屈曲一致理论,研究了热环境中受轴压功能梯度圆柱薄壳分岔屈曲的边界约束效应问题.导出前屈曲变形的解析解,结合分离变量法与有限差分法求解分岔屈曲控制方程,由此导出确定临界轴压的非线性特征值问题.考虑材料热物性质与温度的相关性,分别就两端简支和两端固支边界条件,分析了温度梯度、初始几何缺陷、组分材料体积分数对分岔屈曲临...     

A semi-analytical buckling analysis of imperfect cylindrical shells under axial compression

In the framework of the cellular bifurcation theory, we investigate the effect of distributed and/or localized imperfections on the buckling of long cylindrical shells under axial compression. Using a double scale perturbative approach including modes interaction, we establish that the evolution of amplitudes of instability patterns is governed by a non-homogeneous second order system of three non-linear complex equations. The localized imperfections are included by employing jump conditions for their amplitude and permitting discontinuous derivatives. By solving these amplitude equations, we show the influence of distributed and/or localized imperfections on the reduction of the critical load. To assess the validity of the present method, our results are compared to those given by two finite element codes.     

轴向应力波作用下圆柱壳塑性轴对称动力屈曲

运用有限元特征值分析方法对应力波作用下圆柱壳塑性轴对称动力失稳问题进行了研究。基于应力波理论和相邻平衡准则导出了圆柱壳轴对称动力失稳时的特征方程,在分析中同时考虑了应力波效应及横向惯性效应,把圆柱壳塑性动力失稳问题归结为特征值问题。通过引入圆柱壳动力失稳时的波前约束条件实现了此类问题的有限元特征值解法。计算结果揭示了圆柱壳塑性轴对称动力屈曲变形发展的机理,以及轴向应力波和屈曲变形的相互作用规律。     

Plastic buckling of cylindrical shells under biaxial loading

The predictions for plastic buckling of shells are significantly affected by the plasticity model employed, in particular in the case of nonproportional loading. A series of experiments on plastic buckling of cylindrical aluminum alloy shells under biaxial loading (external pressure and axial tension), with well-defined loading and boundary conditions, was therefore carried out to provide experimental data for evaluation of the suitability of different, plasticity models. In the experiments, initial imperfections and their growth under load were measured and special attention was paid to buckling detection and load path control. The Southwell plot was applied with success to smooth the results. The results show that axial tension decreases resistance to buckling under external pressure in the plastic region due to softening of the material behavior. Comparison with numerical calculations usingJ ₂ deformation and incremental theories indicate that both theories do not predict correctly plastic buckling under nonproportional loading.Babcock (SEM Member), deceased, was Professor of Aeronautics and Applied Mechanics, California Institute of Technology, Pasadena, CA 91125.     

Vibrations and buckling of axially loaded stiffened cylindrical shells with elastic restraints

A theory is derived for calculation of the influence of elastic edge restraints on the vibrations and buckling of stiffened cylindrical shells. The stiffeners are considered “smeared” and the edge restraints can be axial, radial, circumferential or rotational. Extensive computations are performed for special kinds of stringer-stiffened shells, and the theoretical predictions are compared with experimental results. A method of definition of equivalent elastically restrained boundary conditions by use of vibration tests is discussed. Application of this technique to tests on 10 shells significantly reduces the scatter in the ratio of experimental to predicted buckling loads.     

两参数轴向冲击载荷作用下圆柱壳弹塑性动力屈曲

研究圆柱壳在两参数轴向冲击载荷下的弹塑性动力屈曲问题，基本控制方程由弹塑性连续介质中关于加速度的最小原理获得，本构关系采用增量理论。研究表明：屈曲过程可划分为两相，两相之间由临界时间ｔ表征，并分别讨论了应力波对屈曲的影响，压缩波与弯曲波的相互作用及几何尺寸，材料参数，初始缺陷，载荷峰值及持续时间等诸多因素与动力屈曲的关系。     

Dynamic Stability Problems of Anisotropic Cylindrical Shells via a Simplified Analysis

An analytical–numerical method involving a small number of generalized coordinates is presented for the analysis of the nonlinear vibration and dynamic stability behaviour of imperfect anisotropic cylindrical shells. Donnell-type governing equations are used and classical lamination theory is employed. The assumed deflection modes approximately satisfy simply supported boundary conditions. The axisymmetric mode satisfying a relevant coupling condition with the linear, asymmetric mode is included in the assumed deflection function. The shell is statically loaded by axial compression, radial pressure and torsion. A two-mode imperfection model, consisting of an axisymmetric and an asymmetric mode, is used. The static-state response is assumed to be affine to the given imperfection. In order to find approximate solutions for the dynamic-state equations, Hamiltons principle is applied to derive a set of modal amplitude equations. The dynamic response is obtained via numerical time-integration of the set of nonlinear ordinary differential equations. The nonlinear behaviour under axial parametric excitation and the dynamic buckling under axial step loading of specific imperfect isotropic and anisotropic shells are simulated using this approach. Characteristic results are discussed. The softening behaviour of shells under parametric excitation and the decrease of the buckling load under step loading, as compared with the static case, are illustrated.     

Effects of lateral loads and constraints on buckling of cracked thin plates under compressive edge loads

Critical buckling load is important in investigation of behaviors of thin plates or shells. The presence of cracks in these structures can affects their safety factor with respect to the common modes of failure such as buckling. Some analytical solutions were obtained for un-cracked plates with different boundary conditions. Their numerical results have good agreement with these solutions. In this paper, we also studied the effects of lateral loads and constraints on the critical buckling load of cracked plates under axial compression, experimentally and numerically. Effects of length and orientation of cracks are investigated in presence of the lateral loads. Finally, tests data are compared with the results of numerical calculations.