Effect of chelating agents on the selectivity of a hydrophobic ionic liquid membrane

Selective separation of a model mixture of Cs⁺ and Cu²⁺ ions through a liquid membrane based on a 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide hydrophobic ionic liquid (IL) in the presence of chelating compounds under an electric field gradient has been studied. Modifying the hydrophobic ionic liquid membrane with a crown ether (18-crown-6 (18C6) or dibenzo-18-crown-6 (DB18C6)) provides selective separation of cesium and copper(II) ions.     

Use of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate in countercurrent chromatography

Room temperature ionic liquids (RTIL) are molten salts that are liquids at room temperature. Their liquid state makes them possible candidates as solvents in countercurrent chromatography (CCC), which uses solvents as both the mobile and stationary phases. The study focuses on 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM PF₆), an easy to synthesize and purify RTIL whose melting point is –8°C. It is shown that BMIM PF₆ behaves like a solvent of significant polarity (comparable with that of ethanol). The ternary phase diagram water–acetonitrile–BMIM PF₆ is given, because it was necessary to add acetonitrile to reduce the ionic liquid viscosity. The 40:20:40% w/w water–acetonitrile–BMIM PF₆ biphasic liquid system was found to be appropriate as a biphasic liquid system for CCC. Different aromatic solutes, including bases, acids, and neutral compounds, were injected into the CCC column to estimate their distribution constants between the ionic liquid-rich phase and the aqueous phase. The resulting K_il/w constants were compared with the corresponding literature octanol–water partition coefficients, K_o/w. The important drawbacks in the use of RTIL in CCC are clearly pointed out: high viscosity producing pressure build-up, UV absorbance limiting the use of the convenient UV detector, and non-volatility precluding the use of the evaporative light-scattering detector for continuous detection.     

Preparation and characterization of novel crown ether functionalized ionic liquid-based solid-phase microextraction coatings by sol-gel technology

A novel crown ether functionalized ionic liquid (IL), 1-allyl-3-(6'-oxo-benzo-15-crown-5 hexyl) imidazolium hexafluorophosphate was synthesized and used as selective stationary phase to prepare task-specific IL-based solid phase microextraction (SPME) fibers by sol-gel method and free radical cross-linking technology. The underlying mechanism of the sol-gel reaction was proposed and the successful chemical bonding of the crown ether functionalized IL to the formed hybrid organic-inorganic copolymer coating was confirmed by FT-IR spectroscopy. The performance of this in situ created crown ether functionalized IL-based SPME fibers, was investigated in detail. The coating has porous surface structure, stable performance in high temperature (to 340 °C) and in different solutions (water, organic solvent, acid and alkali), and good coating preparation reproducibility. In contrast to the sol-gel derived 1-allyl-3-methyl imidazolium hexafluorophosphate-based coating prepared in our previous work with the identical procedure, the extraction performance of this newly developed sol-gel crown ether functionalized IL-based coating was superior for alcohols, phthalate esters, phenolic environmental estrogens, fatty acids and aromatic amines due to the introduction of benzo-15-crown-5 functional group in IL structure. Moreover, it was shown to provide higher or comparable extraction efficiencies for most analytes studied than did the commercial PDMS, PDMS/DVB and PA fibers.     

Stability of divalent europium in an ionic liquid: spectroscopic investigations in 1-methyl-3-butylimidazolium hexafluorophosphate

In this work, devoted to 1-methyl-3-butylimidazolium hexafluorophosphate ionic liquid (BumimPF(6)), the importance of the purity of the solvent for spectroscopic investigations is highlighted. Results from small angle X-ray scattering indicate that the pure solvent exhibits a local organization. Europium(II), which appears to be unusually stable in BumimPF(6), is characterized by spectroscopic techniques (absorption, luminescence). Solvation of Eu(II) in BumimPF(6) and complexation effects in the presence of the crown ether 15C5 solubilized in the ionic liquid are discussed.     

Octanol/water partition of ionic species, including 544 cations

[structure: see text] Partition coefficients of single ions in the octanol/water system (log P(oct)) have been assigned on the (Ph4As+, Ph4P+) = Ph4B- assumption. The log P(oct) values of Cl-, Br-, and I- ions are then used to obtain the partition coefficients of cations from partition coefficients of the neutral combination of anion and cation. Partition coefficients of 544 cations derived from 585 organic salts from the MedChem database have been studied. The contributions of the aliphatic charge N+ and aromatic charge n+ in these cations have been investigated. The results show that the contributions of N+ and n+ in different homologous series are affected by the attached functional groups and are not constant, although the effect of the central cation is constant along any given homologous series. The latter can be accounted for qualitatively and semiquantitatively by the electrostatic theory of ionic solvation of Abraham and Liszi. A number of regression equations have been established between partition coefficients of ions and partition coefficients of the corresponding neutral species. These equations can be used to estimate octanol/water partition coefficients for additional cations to about 0.5 log unit.     

Limonene in Arizona liquid systems used in countercurrent chromatography. I Physicochemical properties

Limonene is a biorenewable cycloterpene solvent derived from orange peel waste. Its potential as a “green” solvent to replace heptane was recently evaluated. Countercurrent chromatography (CCC) is a preparative separation technique using biphasic liquid systems. One liquid phase is the mobile phase; the other liquid phase is the stationary phase held in place by centrifugal fields. A particular range of special proportions of the heptane/ethyl acetate/methanol/water system is called the Arizona (AZ) liquid system when the heptane/ethyl acetate ratio is exactly the same as the methanol/water ratio. A continuous polarity decrease is obtained between the most polar A composition (ethyl acetate/water or 0/1/0/1 v/v) and the least polar Z composition (heptane/methanol or 1/0/1/0 v/v), replacing heptane by limonene and methanol by ethanol produce biphasic liquid systems much more environmentallyfriendly than the original AZ compositions. The chemical compositions of the two liquid phases of 12 AZ limonene/ethyl acetate/ethanol/water proportions were fully determined by Karl-Fisher titration of water and by gas chromatography for the organic solvents. The results were compared with the compositions of the corresponding AZ mixtures containing heptane and methanol. Significant differences in ethyl acetate and ethanol distribution between phases of the two systems with identical volume proportions were established. The ratio of the upper phase over the lower phase volumes and the phase density difference are important in CCC, there are also significant differences between the classic and “green” AZ systems that are discussed.     

Solvent extraction of amino acids into a room temperature ionic liquid with dicyclohexano-18-crown-6

Amino acids Trp, Gly, Ala, Leu are extracted efficiently from aqueous solution at pH 1.5–4.0 (Lys and Arg at pH 1.5–5.5) into the room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF₆) with dicyclohexano-18-crown-6 (CE). The most hydrophilic amino acids such as Gly are extracted as efficiently as the less hydrophilic (92–96%). The influence of pH, amino acid and crown ether concentration, volume ratio of aqueous and organic phases, and presence of some cations on amino acid recovery were studied. The ratio of amino acid to crown ether in the extracted species is 1:1 for cationic Trp, Leu, Ala, and Gly and to 1:2 for dicationic Arg and Lys. This ionic liquid extraction system was used successfully for the recovery of amino acids from pharmaceutical samples and fermentation broth, and was followed by fluorimetric determination.These results were published in part in Smirnova SV (2002) Ph.D. Thesis, Moscow State University.     

Stability constant of the sodium complex with 18-crown-6 in the mixed water-ionic liquid solvent

The stability constant of the Na⁺ complex with dibenzo-18-crown-6, [Na(DB18C6)]⁺, was measured by the ²³Na NMR method in the mixed water-ionic liquid solvent at 23°C. N-Butyl-4-methylpyridinium tetrafluoroborate (BMPTB) was used as room temperature ionic liquid. It was found that for the solvent containing 0.8 mol fraction of water and 0.2 mol fraction of BMPTB, the value log K = 0.77 ± 0.05. The addition of BMPTB to water was found to increase the solubility of the crown ether but to decrease the sodium nitrate solubility.     

Hydrogen-bonding abilities for phenols assessed by quantitative analyses of their partition coefficients derived from different partitioning systems

We recently proposed a new hydrogen-accepting scale, S(HA), on the basis of the heat of formation calculated by the conductor-like screening model (COSMO) method. In this work, the same approach was applied to a series of compounds with a common hydrogen-donor group. Thus the S(HA) values for monosubstituted phenols were calculated and used for correlating their log P(oct) values (P(oct): 1-octanol/water partition coefficient) with log P(CL) (P(CL): chloroform/water partition coefficient) and log P(E) (P(E): butyl ether/water partition coefficient). It was demonstrated that the S(HA) parameter works effectively, providing excellent correlations whose physicochemical meanings are well rationalized in terms of hydrogen-bonding characteristics of the substituents.     

Photoinduced electron-transfer reactions in two room-temperature ionic liquids: 1-butyl-3-methylimidazolium hexafluorophosphate and 1-octyl-3-methylimidazolium hexafluorophosphate

Photoinduced electron transfer in two room-temperature ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF(6)) and 1-octyl-3-methylimidazolium hexafluorophosphate (OMIM-PF(6)), has been investigated using steady-state fluorescence quenching of 9,10-dicyanoanthracene with a series of single electron donors. From these fluorescence quenching rates, reorganization energy (lambda) values and k(diff) values can be derived from a Rehm-Weller analysis. In many cases, these fluorescence quenching reactions occur at rates larger than what would be expected based on the Smoluchowski equation. In addition, lambda values of 10.1 kcal/mol and 16.3 kcal/mol for BMIM-PF(6) and OMIM-PF(6), respectively, have been determined.     

Effect of crown ethers on the solvent extraction and separation of lanthanide(III) ions with 4-benzoyl-3-methyl-1-phenyl-2-pyrazolin-5-one

Synergistic solvent extraction of 14 lanthanides with mixtures of 4-benzoyl-3-methyl-1-phenyl-2-pyrazolin-5-one (HP) and the crown ethers (S), 18-crown-6, benzo-18-crown-6 or dibenzo-18-crown-6 from an aqueous chloride medium with the constant ionic strength of 0.1 mol dm⁻³ was investigated using benzene as a diluent. The composition of the species extracted was determined as LnP3 · S. The addition of a crown ether to the chelating extractant produced rather significant synergistic effects. On basis of experimental data, values of equilibrium constants, synergistic coefficients, and separation factors were calculated.     

Chiral Discrimination of Amino Acids by an Optically Active Crown Ether Studied by HPLC, Extraction and a Liquid Membrane Transport Experiments

A chiral crown ether incorporating a methyl -d-mannopyranoside unit displayed pronounced enantioselection of amino acids in partition liquid chromatography experiments involving solvent systems of limited miscibility: water–ethanol–2,2,4-trimethylpentane. The same system has been used for amino acid transport across a liquid membrane containing the crown ether, and in liquid–liquid extraction experiments. Remarkable enantioselection has been noted for amino acids in all the processes studied.     

Mild oxidation of alcohols with O-iodoxybenzoic acid (IBX) in ionic liquid 1-butyl-3-methyl-imidazolium chloride and water

[reaction: see text] A mild, efficient, and eco-friendly procedure for the oxidation of alcohols with IBX in ionic liquid [bmim]Cl and water has been developed. Simply stirring of a solution of the alcohol and IBX in [bmim]Cl/water at room temperature followed by extraction with ether or ethyl acetate and removal of the solvent gives excellent yields of the corresponding carbonyl compounds. Recycling and reuse of the oxidant and ionic liquid have also been reported.     

Determination of Polycyclic Aromatic Hydrocarbons in Tobacco Smoke by Ionic Liquid Enrichment and Gas Chromatography – Mass Spectrometry

A rapid, efficient and environmentally friendly method based on the ionic liquid (IL) 1-hexyl-3-methylimidazolium hexafluorophosphate ([C₆MIM][PF₆]) was developed for the determination of 16 polycyclic aromatic hydrocarbons (PAHs) in mainstream tobacco smoke. This technique combined ionic liquid (IL) enrichment with solvent reverse extraction for the replacement of solid phase extraction and rotary evaporation in the traditional method and enriched PAHs in the organic solvent. Several parameters, including the type of ionic liquid, volume of ionic liquid and water, extraction time, vortex time and reverse extraction time, were optimized. After pretreatment, the analytes were analyzed by gas chromatography-mass spectrometry (GC-MS) using selective ion monitoring (SIM). Satisfactory results were achieved when this method was applied to determine PAHs in mainstream tobacco smoke. The calibration curves were linear with correlation coefficients ranging from 0.9955 to 0.9999 at concentration levels of 10–800?µg?L^?1, and the relative standard deviations of the optimized method were between 0.7% and 5.3%. The limits of detection were 0.01–0.6?ng cig^?1, and the recoveries of the compounds were 80.2–118%. A comparison of this protocol with literature methods demonstrated that the proposed procedure provides accurate and reliable sample-treatment for the determination of PAHs in tobacco samples.     

Block copolymer micelle shuttles with tunable transfer temperatures between ionic liquids and aqueous solutions

Four poly((1,2-butadiene)- block-ethylene oxide) (PB-PEO) diblock copolymers were shown to self-assemble into micelles with PB cores and PEO coronas (including spheres, cylinders, and vesicles) in the ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]). All four systems exhibited the "micelle shuttle" (He, Y.; Lodge, T. P. J. Am. Chem. Soc. 2006, 128, 12666-12667), whereby PB-PEO micelles transferred, reversibly and with preservation of micelle structure, from an aqueous phase at room temperature to a hydrophobic ionic liquid at high temperature. The micelle size (both mean and distribution) depends on whether it was initially dissolved in water or in the ionic liquid, but the initial micelle structures in the ionic liquid were shown by dynamic light scattering to be preserved during the transfer and persist essentially unchanged for months in both the ionic liquid and water. The transfer was shown to be driven by the deteriorating solvent quality of water for PEO at high temperature, while the ionic liquid remains a good solvent. The transfer temperature could be tuned by adding ionic or nonionic additives to the aqueous phase to change the solvent quality of water for PEO, and by using ionic liquids with different polarity.     

Nickel Complexes Catalyzed Hydrodechlorination of Aryl Chlorides in Ionic Liquid

The hydrodechlorination performance of nickel complex catalysts, Ni[phen]₂(PF₆)₂ and Ni[bpy]₃(PF₆)₂, were investigated with [Bmim]Br as the ionic liquid solvent. It is proved that Ni[phen]₂(PF₆)₂ is efficient for the hydrodechlorination of aryl chlorides under mild conditions with water as the hydrogen source. The hydrogen source of reaction is from the water which was confirmed by the deuterium incorporation experiments. Recycling experiments showed a decreasing activity of this catalyst due to a small leaching of nickel complex from the ionic liquid phase during the recycling process where n‐heptane was used as the extractant. A plausible reaction route has been suggested.     

Hydrophobicity parameters determined by reversed-phase liquid chromatography. XV: optimal conditions for prediction of log P(oct) by using RP-HPLC procedures

The use of log k derived from reversed phase (RP)-HPLC retention times provides a convenient method for estimating log P(oct) values (P(oct): 1-octanol/water partition coefficient). In order to establish optimal HPLC conditions, the difference between chromatographic (C18 modified column and aqueous methanol eluents) and bulk solvent systems was examined by use of a batch-like equilibration with octane/aqueous methanol. Comparison of values for log P(O/M-W) (log P for the Octane/MeOH-Water partitioning system) and log k measured for monosubstituted pyrazines at different methanol concentrations, showed closest correlation (r, 0.94) with 50% aqueous methanol; and importantly, under these conditions, log k shows even better correlation (r, 0.99) with log P(oct). Effects of residual silanols on HPLC retention with C18 stationary phases were examined. The results show that, in the presence of a small quantity of accessible silanols, the use of 50% aqueous methanol (M50) as eluent yields values of log k directly proportional to log P(oct) in accord with our earlier proposal that use of log k(M50) provides a convenient means for rapid estimation and prediction of log P(oct).     

CO2/离子液体体系热力学性质的分子动力学模拟

超临界CO2和离子液体(ILs)是两种绿色溶剂. 离子液体可以溶解超临界CO2, 而超临界CO2不能溶解离子液体. 由此设计构成的CO2/IL二元系统, 同时具备了超临界CO2和离子液体的许多优点: 既可以降低离子液体的粘度, 还便于相分离, 是新型的耦合绿色溶剂. 其物理化学性质对于设计反应、分离等过程非常重要. 因此, 本文以CO2/IL二元系统为研究对象, 通过选择合适的分子力场和系综, 运用分子动力学(MD)模拟方法研究了CO2/[bmim][PF6]、CO2/[bmim][NO3]等体系的热力学性质. 结果表明, CO2对ILs膨胀度的影响非常小, 当CO2摩尔分数为0.5时, ILs膨胀仅为15%. CO2/ILs的扩散系数远小于CO2膨胀甲醇、乙醇溶液的扩散系数. 随着CO2含量的增加, ILs的扩散系数提高, 粘度显著下降, 表明CO2能有效地改善ILs扩散性, 减小其粘度. 因此CO2可用以改善离子液体溶剂体系的传递特性, 增强反应分离过程在其中的进行.     

Isolation and purification of alkaloids from lotus leaves by ionic‐liquid‐modified high‐speed countercurrent chromatography

An effective high‐speed countercurrent chromatography method was successfully established by using ionic liquids as the modifier of the two‐phase solvent system. Adding a small amount of ionic liquids significantly shortens the separation time and improves the separation efficiency. The conditions of ionic‐liquid‐modified high‐speed countercurrent chromatography including solvent systems, types and content of added ionic liquids, and ionic liquids posttreatment were investigated. The established method was successfully applied to separate alkaloids from lotus leaves using a two‐phase solvent system composed of petroleum ether/ethyl acetate/methanol/water/[C₄mim][BF₄] (1:5:1:5:0.15, v/v/v/v/v). Four alkaloids pronuciferine (1.7 mg), N‐nornuciferine (4.3 mg), nuciferine (3.1 mg), and roemerine (2.1 mg) were obtained with the purities of 90.53, 92.25, 99.86, and 98.63%, respectively, from 100 mg crude extract of lotus leaves. The results indicated that the ionic‐liquid‐modified high‐speed countercurrent chromatography method was suitable for alkaloid separation from lotus leaves and would be a promising method for the separation of alkaloids from other natural products.