Dynamics of CO in mesoporous silica monitored by time-resolved step-scan and rapid-scan FT-IR spectroscopy

Carbon monoxide molecules generated in the channels of mesoporous MCM-41 silica sieve from a precursor (diphenyl cyclopropenone) by photodissociation with a nanosecond laser pulse were monitored by time-resolved Fourier transform infrared (FTIR) spectroscopy using the step-scan and rapid-scan methods. A very broad absorption of CO is observed in the region 2200-2080 cm(-1) at room temperature that decays in a biphasic mode. Two-thirds of the band intensity decays on the hundreds of microsecond scale (lifetime 344 +/- 70 micros). The process represents the escape of the molecules through the mesopores into the surrounding gas phase, and a diffusion constant of 1.5 x 10(-9) m(2)/s is derived (assuming control by intra-MCM-41 particle diffusion). The broad profile of the absorption is attributed to contact of the random hopping CO with siloxane and silanol groups of the pore surface. Measurements using MCM-41 with the silanols partially capped by trimethyl silyl groups gave further insight into the nature of the IR band profile. These are the first observations on the diffusion behavior of carbon monoxide in a mesoporous material at room temperature. The residual carbon monoxide remains much longer in the pores and features distinct peaks at 2167 and 2105 cm(-1) characteristic for CO adsorbed on SiOH groups C end on and O end on, respectively. The bands decrease with time constants of 113 +/- 3 ms (2167 cm(-1)) and 155 +/- 15 ms (2105 cm(-1)) suggesting that CO in these sites is additionally trapped by surrounding diphenyl acetylene coproduct and/or precursor molecules.     

Studies on the Adsorption and Dissociation of Methane and Carbon Dioxide on Nickel

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalysts were extensively investigated by TPSR, TPD, XPS and pulse reaction methods. These studies showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalysts. Carbidic Cα, carbonaceous Cβ and carbidic clusters Cγ surface carbon species formed by the decomposition of methane demonstrated different surface mobility, thermal stability and reactivity. Carbidic Cα is a very active and important intermediate in carbon dioxide reforming with methane, and the carbidic clusters Cγ species might be the precursor of surface carbon deposition. The partially dehydrogenated Cβ species can react with H2 or CO2 to form CH4 or CO. On the other hand, it was proven that CO2 can be weakly adsorbed on supported nickel catalysts, and only one kind of CO2 adsorption state is formed. The interaction mechanism between the species dissociated from CH4 and CO2 during reforming was then hypothesized.     

Reactions of trimethylindium on TiO2 nanoparticles: experimental and computational study

This article reports the results of an experimental and computational study on the reaction of trimethylindium, In(CH3)(3), adsorbed on TiO2 nanoparticle films. Experimentally, Fourier transform infrared (FTIR) spectra have been measured by varying In(CH3)(3) dosing pressure, UV irradiation time in the absence and presence of oxygen, and surface annealing temperature on both "clean" and HO-covered TiO2 nanoparticle films. Computationally, adsorption energies, molecular structures, and vibrational frequencies of possible adsorbates have been predicted by first-principles calculations based on the density functional theory (DFT) and the pseudopotential method. Three important reactions involving CH3 elimination, CH4 elimination, and CH3 migration from the adsorbed trimethylindium have been elucidated in detail. CH(3 migration is the only exothermic process with the lowest reaction barrier. On the basis of experimental and computational results, the two sharpest peaks at 2979 and 2925 cm(-1), detected in the dosage and UV irradiation experiments in the absence of oxygen, are attributable to the asymmetric and symmetric C-H vibrations of methyl groups in In(CH3)3(a) and its derivatives, (H3C)2In(a), H3CIn(a), and H3CO(a). In the UV irradiation experiment in the presence of oxygen, the methyl groups attached to the In atom were quickly oxidized to the methoxy with the C-H vibrations at 2925 and 2822 cm(-1) and to the carboxyl group with vibrations at 2888 cm(-1) (vs(CH)), 1577 cm(-1) (va(OCO)), 1380 cm(-1) (delta(CH)), and 1355 cm(-1) (vs(OCO)). Finally, from the computed energies with vibrational analysis, the adsorbed structure of the carboxyl group was confirmed to involve two oxygen atoms doubly adsorbed on two surface Ti atoms.     

漫反射付立叶红外光谱法研究二氧化碳的催化甲烷化

用漫反射付立叶红外光谱法（ＤＲＩＦＴ）研究了二氧化碳甲烷化催化剂Ｎｉ／Ａｌ２Ｏ３体系的表面物种及催化反应过程．结果表明：二氧化碳难以直接在催化剂表面发生吸附，而是通过与其它反应物的作用，生成含氧酸根类表面吸附物种，并以此为主要中间物进行下一步反应．含氧酸根类物种主要吸附于载体表面．一氧化碳不是反应的主要中间物，而仅作为一种副产物出现     

Surface-enhanced Raman spectroscopic evidence of methanol oxidation on ruthenium electrodes

Electrooxidation of methanol on Ru surfaces was investigated using in situ surface-enhanced Raman spectroscopy. Although the cyclic voltammogram did not show a significant methanol oxidation current on Ru, a Raman band at approximately 1970-1992 cm(-1) was observed from 0.4 to 0.8 V in 0.1 M HClO(4) + 1 M methanol. By comparing with the C-O stretching band (nu(CO)) of carbon monoxide (CO) adsorbed on RuO(2)(110) in the ultrahigh vacuum and on oxidized Ru electrodes, the observed spectral feature is assigned to nu(CO) of adsorbed CO (CO(ads)) on RuO(2). The formation of CO(ads) suggests that methanol oxidation does occur on Ru at room temperature, which is in contrast to the perception that Ru is not active for the reaction. The lack of significant methanol oxidation current is attributed to the competing rapid surface oxidation, which forms inactive surface oxides and therefore inhibits the methanol oxidation.     

Study on the Reaction Mechanism for Carbon Dioxide Reforming of Methane over supported Nickel Catalyst

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalyst were extensively investigated by TPSR and TPD experiments. It showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalyst, while CO2 adsorbed on the catalyst weakly and only existed in one kind of adsorption state. Then the mechanism of interaction between the species dissociated from CH4 and CO2 during reforming was proposed.     

CO adsorption on CoMo and NiMo sulfide catalysts: a combined IR and DFT study

Experimental IR spectra of carbon monoxide adsorbed on a series of Mo/Al2O3, CoMo/Al2O3, and NiMo/Al2O3 sulfided catalysts have been compared to ab initio DFT calculations of CO adsorption on CoMo and NiMo model surfaces. This approach allows the main IR features of CO adsorbed on the sulfide phase to be assigned with an uncertainty of 15 cm(-1). On the CoMo system, the band at 2070 cm(-1) is specific of the promotion by Co and is assigned to CO interacting either with a Co atom or with a Mo atom adjacent to a Co atom. On the NiMo system, CO adsorption on Ni centers of the promoted phase leads to a high-wavenumber band at approximately 2120 cm(-1) that strongly overlaps the band at 2110 cm(-1) characteristic of nonpromoted Mo sites. For NiMo and CoMo catalysts, broad shoulders at low wave numbers (below 2060 cm(-1)) are characteristic of Mo centers adjacent to promoter atoms, indicating a partial decoration of the MoS2 edges by the promoter.     

The profile of the 2140 cm(-1) solid CO band on different substrates

We have studied the profile of the 2140 cm(-1) fundamental band of solid carbon monoxide (CO) at low temperature (10-15 K) by infrared transmission spectroscopy and by reflection absorption infrared (RAIR) spectroscopy. In particular, transmission spectra have been taken after CO had been adsorbed on a bare crystalline silicon substrate and on pre-adsorbed solid N(2) layers of different thickness. RAIR spectra have been taken after CO had been adsorbed on a bare gold substrate and on pre-adsorbed solid N(2) layers of different thickness. Laboratory spectra show that the profile of the fundamental CO band at about 2140 cm(-1) is different in the different instances considered. In particular, we have found that the relative intensity of the LO and TO modes of the CO band depends on the thickness of the N(2) layer. Here we present the experimental results and show that these can be predicted by the elementary electromagnetic theory.     

Methane dissociative adsorption on the Pt(111) surface over the 300-500 K temperature and 1-10 Torr pressure ranges

The dissociative adsorption of methane on the Pt(111) surface has been investigated and characterized over the 1-10 Torr pressure and 300-500 K temperature ranges using sum frequency generation (SFG) vibrational spectroscopy and Auger electron spectroscopy (AES). At a reaction temperature of 300 K and a pressure of 1 Torr, C-H bond dissociation occurs in methane on the Pt(111) surface to produce adsorbed methyl (CH(3)) groups, carbon, and hydrogen. SFG results suggest that C-C coupling occurs at higher reaction temperatures and pressures. At 400 K, methyl groups react with adsorbed C to form ethylidyne (C(2)H(3)), which dehydrogenates at 500 K to form ethynyl (C(2)H) and methylidyne (CH) species, as shown by SFG. By 600 K, all of the ethylidyne has reacted to form the dissociation products ethynyl and methylidyne. Calculated C-H bond dissociation probabilities for methane, determined by carbon deposition measured by AES, are in the 10(-8) range and increase with increasing reaction temperature. A mechanism has been developed and is compared with conclusions from other experimental and theoretical studies using single crystals.     

Analysis of trace amounts of carbon dioxide, oxygen and carbon monoxide in nitrogen using dual capillary columns and a pulsed discharge helium ionisation detector

Gas mixtures of trace amounts of carbon dioxide (CO(2)), dioxygen (O(2)), and carbon monoxide (CO) in dinitrogen (N(2)) were separated and quantified using parallel dual capillary columns and pulsed discharge helium ionisation detection (PDHID). The detection limits (9 x 10(-9) mol mol(-1) for CO(2), 7 x 10(-9) mol mol(-1) for O(2) and 37 x 10(-9) mol mol(-1) for CO) were lower than those reported previously for similar methods. Uncertainties were calculated and results were validated by comparison of the CO and CO(2) results with those obtained using conventional methods. The method was also used to analyse nitrogen, carbon dioxide and carbon monoxide in oxygen.     

Density functional theory study of CHx (x=1-3) adsorption on clean and CO precovered Rh(111) surfaces

CH(x) (x=1-3) adsorptions on clean and CO precovered Rh(111) surfaces were studied by density functional theory calculations. It is found that CH(x) (x=1-3) radicals prefer threefold hollow sites on Rh(111) surfaces, and the bond strength between CH(x) and Rh(111) follows the order of CH(3)相似文献   

Contribution to the evaluation of density of methane adsorbed on activated carbon

The adsorption isotherms of N(2) at -196 degrees C, CO(2) at 0 degrees C, and CH(4) at 25 degrees C on 35 activated carbons with a wide range of micropore volumes and pore size distributions have been compared to evaluate the density of adsorbed methane. Results indicate that methane is adsorbed in the micropores of the activated carbon with a density that is a function of the carbon porosity because methane is packed more compactly in narrow than in wide micropores. An experimental procedure is proposed to evaluate the density in both types of micropores as a function of pressure. Its application to these porous carbons indicates that density of adsorbed methane increases rapidly with pressure on narrow micropores, the increase becoming slower above 1.5 MPa. The value reached at 3 MPa is 0.21 g/cm(3), near that estimated as the limiting value, 0.23 g/cm(3). Density in wide micropores is low, 0.09 g/cm(3) at 3 MPa, but it continuously increases with pressure.     

Kinetic study of oxidative coupling of methane over Mn and/or W promoted Na_2SO_4/SiO_2 catalysts

A comprehensive kinetic model for oxidative coupling of methane(OCM)over Mn and/or W promoted Na2SO4/SiO2 catalysts was developed based on a micro-catalytic reactor data.The methane conversion and ethylene,ethane,carbon monoxide and carbon dioxide selectivities were obtained in a wide operating condition range of 750 - 825-C,CH4/O2=2.5 - 10 and contact time=267 - 472 kg s m-3.Reaction networks of six models with different rate equation types were compared together.The kinetic rate parameters of each reaction network were estimated using linear regression or genetic algorithm optimization method(GA).A reaction network suggested by Stansch et al.for OCM was found to be the best one and was further used in this work.The suggested model could predict the experimental results of OCM reaction within a deviation range of ± 20%.     

一氧化碳在Ru/Al2O3上吸附态的相互转化和稳定性的研究

本文利用差分红外光谱方法研究了不同预处理条件下,CO在4% Ru/Al₂O₃上的吸附,以及H₂和CO在Ru/Al₂O₃上的共吸附。对CO在Ru上吸附态的红外光谱进行了归属,认为2070cm^-1-2060cm^-1的中频谱带是孪生CO吸附态的对称伸缩振动和线式CO吸附态的伸缩振动相叠合的谱带。讨论了表面碳(C_S)、表面氧(O_S)、表面氢(H_S)对CO吸附态的影响,认为CO在Ru上发生岐化反应形成的表面碳可使Ru=CO键加强,共吸附H₂可使Ru-CO键削弱。表面氧促使形成缺电子的中心,在此中心上生成CO孪生吸附态。CO的孪生吸附是活化吸附过程。     

A computational study on the structures of methylamine-carbon dioxide-water clusters: evidence for the barrier free formation of the methylcarbamic acid zwitterion (CH3NH2+COO-) in interstellar water ices

We investigated theoretically the interaction between methylamine (CH(3)NH(2)) and carbon dioxide (CO(2)) in the presence of water (H(2)O) molecules thus simulating the geometries of various methylamine-carbon dioxide complexes (CH(3)NH(2)/CO(2)) relevant to the chemical processing of icy grains in the interstellar medium (ISM). Two approaches were followed. In the amorphous water phase approach, structures of methylamine-carbon dioxide-water [CH(3)NH(2)/CO(2)/(H(2)O)(n)] clusters (n = 0-20) were studied using density functional theory (DFT). In the crystalline water approach, we simulated methylamine and carbon dioxide interactions on a fragment of the crystalline water ice surface in the presence of additional water molecules in the CH(3)NH(2)/CO(2) environment using DFT and effective fragment potentials (EFP). Both the geometry optimization and vibrational frequency analysis results obtained from these two approaches suggested that the surrounding water molecules which form hydrogen bonds with the CH(3)NH(2)/CO(2) complex draw the carbon dioxide closer to the methylamine. This enables, when two or more water molecules are present, an electron transfer from methylamine to carbon dioxide to form the methylcarbamic acid zwitterion, CH(3)NH(2)(+)CO(2)(-), in which the carbon dioxide is bent. Our calculations show that the zwitterion is formed without involving any electronic excitation on the ground state surface; this structure is only stable in the presence of water, i.e. in a methyl amine-carbon dioxide-water ice. Notably, in the vibrational frequency calculations on the methylcarbamic acid zwitterion and two water molecules we find the carbon dioxide asymmetric stretch is drastically red shifted by 435 cm(-1) to 1989 cm(-1) and the carbon dioxide symmetric stretch becomes strongly infrared active. We discuss how the methylcarbamic acid zwitterion CH(3)NH(2)(+)CO(2)(-) might be experimentally and astronomically identified by its asymmetric CO(2) stretching mode using infrared spectroscopy.     

利用TiO2/SO42-光触媒催化还原CO2之参数影响与反应路径探讨

将改良式溶胶-凝胶法制备的酸性触媒TiO2/SO24-涂布于不锈钢网上,并利用自行设计之批次式光催化反应器,在三组近紫外灯管(波长为365nm,光强度为2.0mW/cm2)照射下,进行CO2光催化还原反应操作参数(还原剂种类、CO2初始浓度和反应温度)之影响研究.结果显示,使用氢气为还原剂可获得最高的光催化还原速率,光还原反应之主要气态产物为CO和甲烷,其次为微量的乙烯与乙烷.同时,光催化还原速率亦随着CO2初始浓度及反应温度的提高而增加.FT-IR光谱分析发现,TiO2/SO42-光触媒表面有甲酸、甲醇、碳酸盐、甲酸盐及甲酸甲酯等产物之存在.TiO2/SO42-光触媒催化还原CO2有两种可能反应路径,其中一种反应路径生成CO,CH4,C2H4及C2H6等气态产物;而另一种反应路径则生成CO23a-ds,CH3OHads,HCOOa-ds,HCOOHads,HCOHads与HCOOCH3ads等吸附在光触媒表面的产物.     

Photoinduced adsorption of hydrogen and methane on gamma-alumina. the photoinduced chesorluminescence (PhICL) effect

Adsorption of hydrogen and methane on a preirradiated surface of gamma-Al2O3 produces an afterglow, which has been described as a photoinduced chesorluminescence (PhICL), whose spectral features identify with the intrinsic photoluminescence of alumina. The emission spectrum consists of at least four overlapping single emission bands. For methane adsorption, the PhICL phenomenon is seen only if the solid is preirradiated in the presence of oxygen. Emission decay kinetics of the PhICL effect for gamma-Al2O3 reveal two wavelength regimes: a short wavelength regime at lambda = 300-370 nm (decay time tau = 1.1 +/- 0.2 s; signal width = 2.8 s), and a longer wavelength regime at lambda = 380-700 nm (decay time tau = 2.1 +/- 0.1 s; signal width = 4.3 s). A model is proposed in which there exist two different emission centers and, thus, two different pathways for emission decay. In the first, emission originates with electron trapping by such deep energy traps as anion vacancies {e- + Va --> F+ + hv1} to yield electron F-type color centers, whereas in the second, emission originates from electron/trapped hole recombination {e- + Os*- --> Os2- + hv2}. The first common step of the pathways is homolytic dissociative chemisorption of hydrogen and methane upon interaction with surface-active hole centers Os*-, produced upon preirradiation of alumina, to give atomic hydrogen H* and methyl radicals CH3*. Thermoprogrammed desorption spectra of photoadsorbed or postsorbed oxygen show that adsorbed oxygen interacts with atomic hydrogen and methyl radicals. The products of thermodesorption were H2O for hydrogen and H2O, CO2, and CH3CH3 for methane. The Solonitsyn memory effect coefficient was also evaluated for oxygen photoadsorption.     

氮化钴电催化还原二氧化碳为一氧化碳

电催化还原二氧化碳是一种潜在的解决全球变暖的途径,但是仍有许多挑战. 本文报道了使用氮化钴在水溶液中电催化还原二氧化碳为一氧化碳. 通过对比不同煅烧温度及气氛合成的催化剂表明氮掺杂对催化活性的提高至关重要. 其中700-Co_5.47N/C展现了最高的催化活性,在较低的电势-0.7 V(vs. RHE)下,一氧化碳的电流密度达到9.78 mA·cm^-2. 另外,通过改变电解电压,CO/H₂ 的比例能在1:3到3:2之间调节. 91 mV·dec^-1的Tafel 斜率表明形成表面吸附的CO₂^·-中间体是CO₂表面还原的决速步骤,而氮化策略可以增加表面碱性位点的数量,从而稳定还原的中间体,提高反应效率和产物选择性.     

天然气和甲烷固体氧化物燃料电池中的Ni-LCCM-GDC阳极性能研究

采用溶胶-凝胶法合成了纳米粉体La_1-xCe_xCr_0.5Mn_0.5O_3-δ(x=0.05,0.10,0.15,0.20)(LCCM),并采用共压-共烧结法制备了以复合阳极Ni-La_0.9Ce_0.1Cr_0.5Mn_0.5O_3-δ-Ce_0.8Gd_0.2O_2-δ(GDC)为支撑、GDC为电解质、La_0.8Sr_0.2Co_0.8Fe_0.2O_3-δ(LSCF)-GDC为复合阴极的单电池。利用XRD和SEM等方法对阳极材料进行了晶相结构、化学相容性、微观形貌分析。在500~750 ℃范围内,分别以湿天然气(3% H₂O)和甲烷为燃料气,氧气为氧化气测试了单电池的电化学性能,同时检测了以甲烷为燃料气的阳极尾气组成。结果表明：复合阳极材料具有良好的化学相容性;阳极和阴极具有较好的孔隙结构。以天然气和甲烷为燃料气的单电池在700 ℃时最大电流密度分别为131.96 mA·cm^-2,162.36 mA·cm^-2; 最大比功率分别为28.61 mW·cm^-2,31.03 mW·cm^-2。在500~750 ℃范围内阳极尾气中均检测出CO,CO₂,在700 ℃时CO,CO₂含量达到最大值,分别为2.39254%,6.20891%。