Group Additive Values for the Gas‐Phase Standard Enthalpy of Formation,Entropy and Heat Capacity of Oxygenates

A complete and consistent set of 60 Benson group additive values (GAVs) for oxygenate molecules and 97 GAVs for oxygenate radicals is provided, which allow to describe their standard enthalpies of formation, entropies and heat capacities. Approximately half of the GAVs for oxygenate molecules and the majority of the GAVs for oxygenate radicals have not been reported before. The values are derived from an extensive and accurate database of thermochemical data obtained by ab initio calculations at the CBS‐QB3 level of theory for 202 molecules and 248 radicals. These compounds include saturated and unsaturated, α‐ and β‐branched, mono‐ and bifunctional oxygenates. Internal rotations were accounted for by using one‐dimensional hindered rotor corrections. The accuracy of the database was further improved by adding bond additive corrections to the CBS‐QB3 standard enthalpies of formation. Furthermore, 14 corrections for non‐nearest‐neighbor interactions (NNI) were introduced for molecules and 12 for radicals. The validity of the constructed group additive model was established by comparing the predicted values with both ab initio calculated values and experimental data for oxygenates and oxygenate radicals. The group additive method predicts standard enthalpies of formation, entropies, and heat capacities with chemical accuracy, respectively, within 4 kJ mol^?1 and 4 J mol^?1 K^?1 for both ab initio calculated and experimental values. As an alternative, the hydrogen bond increment (HBI) method developed by Lay et al. (T. H. Lay, J. W. Bozzelli, A. M. Dean, E. R. Ritter, J. Phys. Chem.­ 1995 , 99, 14514) was used to introduce 77 new HBI structures and to calculate their thermodynamic parameters (Δ_fH°, S°, C_p°). The GAVs reported in this work can be reliably used for the prediction of thermochemical data for large oxygenate compounds, combining rapid prediction with wide‐ranging application.     

First principles based group additive values for the gas phase standard entropy and heat capacity of hydrocarbons and hydrocarbon radicals

In this work a complete and consistent set of 95 Benson group additive values (GAVs) for standard entropies S(o) and heat capacities C(p)(o) of hydrocarbons and hydrocarbon radicals is presented. These GAVs include 46 groups, among which 25 radical groups, which, to the best of our knowledge, have not been reported before. The GAVs have been determined from a set of B3LYP/6-311G(d,p) ideal gas statistical thermodynamics values for 265 species, consistently with previously reported GAVs for standard enthalpies of formation. One-dimensional hindered rotor corrections for all internal rotations are included. The computational methodology has been compared to experimental entropies (298 K) for 39 species, with a mean absolute deviation (MAD) between experiment and calculation of 1.2 J mol(-1) K(-1), and to 46 experimental heat capacities (298 K) with a resulting MAD = 1.8 J mol(-1) K(-1). The constructed database allowed evaluation of corrections on S(o) and C(p)(o) for non-nearest-neighbor effects, which have not been determined previously. The group additive model predicts the S(o) and C(p)(o) within approximately 5 J mol(-1) K(-1) of the ab initio values for 11 of the 14 molecules of the test set, corresponding to an acceptable maximal deviation of a factor of 1.6 on the equilibrium coefficient. The obtained GAVs can be applied for the prediction of S(o) and C(p)(o) for a wide range of hydrocarbons and hydrocarbon radicals. The constructed database also allowed determination of a large set of hydrogen bond increments, which can be useful for the prediction of radical thermochemistry.     

Accurate and efficient method for predicting thermochemistry of polycyclic aromatic hydrocarbons - bond-centered group additivity

A self-consistent estimation method for the thermochemical properties of polycyclic aromatic hydrocarbons (PAH) is presented. This method is based on enthalpies of formation (DeltaHf(degrees), entropies (S(degrees)298, and heat capacities (C(degrees)p obtained from B3LYP/6-31G(d) calculations of the total energies and frequencies for 139 PAHs, including C(60) and C(70) fullerenes. The enthalpies of formation were calculated using an optimized set of homodesmic reactions given the available experimental DeltaHf(degrees) of PAHs. The theoretical entropies were compared with the existing experimental entropies, and some inconsistencies in the experimental data were identified. The estimation method presented here is a systematic extension of the widely employed atom-centered group additivity method originally proposed by Benson. This new method is based on bond-centered groups that define bonds linking two atom-centered groups and specify the size of the rings to which they belong. In addition, a term to describe the resonance energy is included. The thermochemical properties of PAHs up to C(70) fullerene are estimated with a mean average deviation of 2.8 kcal mol(-1) in DeltaHf(degrees), 0.7 cal K(-1) mol(-1) in S(degrees)298, and about 0.5 cal K(-1) mol(-1) in the C(degrees)p. This bond-centered group additivity method for the thermochemical properties of PAHs significantly expands both the range of systems that can be estimated and the accuracy of the estimations. The results of this work also allow us to assess the quality of available experimental data. For example, there are strong indications that the literature DeltaHf(degrees)of benzo[k]fluoranthene is about 10 kcal mol(-1) too low.     

Group additive values for the gas phase standard enthalpy of formation of hydrocarbons and hydrocarbon radicals

A complete and consistent set of 95 Benson group additive values (GAV) for the standard enthalpy of formation of hydrocarbons and hydrocarbon radicals at 298 K and 1 bar is derived from an extensive and accurate database of 233 ab initio standard enthalpies of formation, calculated at the CBS-QB3 level of theory. The accuracy of the database was further improved by adding newly determined bond additive corrections (BAC) to the CBS-QB3 enthalpies. The mean absolute deviation (MAD) for a training set of 51 hydrocarbons is better than 2 kJ mol(-1). GAVs for 16 hydrocarbon groups, i.e., C(C(d))(3)(C), C-(C(d))(4), C-(C(t))(C(d))(C)(2), C-(C(t))(C(d))(2)(C), C-(C(t))(C(d))(3), C-(C(t))(2)(C)(2), C-(C(t))(2)(C(d))(C), C-(C(t))(2)(C(d))(2), C-(C(t))(3)(C), C-(C(t))(3)(C(d)), C-(C(t))(4), C-(C(b))(C(d))(C)(H), C-(C(b))(C(t))(H)(2), C-(C(b))(C(t))(C)(H), C-(C(b))(C(t))(C)(2), C(d)-(C(b))(C(t)), for 25 hydrocarbon radical groups, and several ring strain corrections (RSC) are determined for the first time. The new parameters significantly extend the applicability of Benson's group additivity method. The extensive database allowed an evaluation of previously proposed methods to account for non-next-nearest neighbor interactions (NNI). Here, a novel consistent scheme is proposed to account for NNIs in radicals. In addition, hydrogen bond increments (HBI) are determined for the calculation of radical standard enthalpies of formation. In particular for resonance stabilized radicals, the HBI method provides an improvement over Benson's group additivity method.     

Thermochemistry and bond dissociation energies of ketones

Ketones are a major class of organic chemicals and solvents, which contribute to hydrocarbon sources in the atmosphere, and are important intermediates in the oxidation and combustion of hydrocarbons and biofuels. Their stability, thermochemical properties, and chemical kinetics are important to understanding their reaction paths and their role as intermediates in combustion processes and in atmospheric chemistry. In this study, enthalpies (ΔH°(f 298)), entropies (S°(T)), heat capacities (C(p)°(T)), and internal rotor potentials are reported for 2-butanone, 3-pentanone, 2-pentanone, 3-methyl-2-butanone, and 2-methyl-3-pentanone, and their radicals corresponding to loss of hydrogen atoms. A detailed evaluation of the carbon-hydrogen bond dissociation energies (C-H BDEs) is also performed for the parent ketones for the first time. Standard enthalpies of formation and bond energies are calculated at the B3LYP/6-31G(d,p), B3LYP/6-311G(2d,2p), CBS-QB3, and G3MP2B3 levels of theory using isodesmic reactions to minimize calculation errors. Structures, moments of inertia, vibrational frequencies, and internal rotor potentials are calculated at the B3LYP/6-31G(d,p) density functional level and are used to determine the entropies and heat capacities. The recommended ideal gas-phase ΔH°(f 298), from the average of the CBS-QB3 and G3MP2B3 levels of theory, as well as the calculated values for entropy and heat capacity are shown to compare well with the available experimental data for the parent ketones. Bond energies for primary, secondary, and tertiary radicals are determined; here, we find the C-H BDEs on carbons in the α position to the ketone group decrease significantly with increasing substitution on these α carbons. Group additivity and hydrogen-bond increment values for these ketone radicals are also determined.     

Benson group additivity values of phosphines and phosphine oxides: Fast and accurate computational thermochemistry of organophosphorus species

Composite quantum chemical methods W1X-1 and CBS-QB3 are used to calculate the gas phase standard enthalpy of formation, entropy, and heat capacity of 38 phosphines and phosphine oxides for which reliable experimental thermochemical information is limited or simply nonexistent. For alkyl phosphines and phosphine oxides, the W1X-1, and CBS-QB3 results are mutually consistent and in excellent agreement with available G3X values and empirical data. In the case of aryl-substituted species, different computational methods show more variation, with G3X enthalpies being furthest from experimental values. The calculated thermochemical data are subsequently used to determine Benson group additivity contributions for 24 Benson groups and group pairs involving phosphorus, thereby allowing fast and accurate estimations of thermochemical data of many organophosphorus compounds of any complexity. Such data are indispensable, for example, in chemical process design or estimating potential hazards of new chemical compounds. © 2018 Wiley Periodicals, Inc.     

Thermochemical data and additivity group values for ten species of o-xylene low-temperature oxidation mechanism

o-Xylene could be a good candidate to represent the family of aromatic hydrocarbons in a surrogate fuel. This study uses computational chemistry to calculate standard enthalpies of formation at 298 K, Δ(f)H°(298 K), standard entropies at 298 K, S°(298 K), and standard heat capacities C(p)°(T) over the temperature range 300 K to 1500 K for ten target species present in the low-temperature oxidation mechanism of o-xylene: o-xylene (1), 2-methylbenzyl radical (2), 2-methylbenzylperoxy radical (3), 2-methylbenzyl hydroperoxide (4), 2-(hydroperoxymethyl)benzyl radical (5), 2-(hydroperoxymethyl)benzaldehyde (6), 1-ethyl-2-methylbenzene (7), 2,3-dimethylphenol (8), 2-hydroxybenzaldehyde (9), and 3-hydroxybenzaldehyde (10). Δ(f)H°(298 K) values are weighted averages across the values calculated using five isodesmic reactions and five composite calculation methods: CBS-QB3, G3B3, G3MP2, G3, and G4. The uncertainty in Δ(f)H°(298 K) is also evaluated. S°(298 K) and C(p)°(T) values are calculated at B3LYP/6-311G(d,p) level of theory from molecular properties and statistical thermodynamics through evaluation of translational, rotational, vibrational, and electronic partition functions. S°(298 K) and C(p)°(300 K) values are evaluated using the rigid-rotor-harmonic-oscillator model. C(p)°(T) values at T ≥ 400 K are calculated by treating separately internal rotation contributions and translational, external rotational, vibrational, and electronic contributions. The thermochemical properties of six target species are used to develop six new additivity groups taking into account the interaction between two substituents in ortho (ORT/CH2OOH/ME, ORT/ET/ME, ORT/CHO/OH, ORT/CHO/CH2OOH) or meta (MET/CHO/OH) positions, and the interaction between three substituents (ME/ME/OH123) located one beside the other (positions numbered 1, 2, 3) for two- or three-substituted benzenic species. Two other additivity groups are also developed using the thermochemical properties of benzenic species taken from the literature: the C/CB/H2/OO and the CB/CO groups. These groups extend the capacities of the group additivity method to deal with substituted benzenic species.     

Group additivity values for estimating the enthalpy of formation of organic compounds: an update and reappraisal. 2. C, H, N, O, S, and halogens

This study extends a previous publication on group additivity values (GAVs) for the elements C, H, and O, to include the elements nitrogen, sulfur, and the halogens. The present state and utility of the Benson additivity schemes for estimating the enthalpy of formation (Δ(f)H(0)) of organic compounds are again described, extending them to include more elements. Old and new GAVs for a wide variety of compounds are provided and are revised where necessary. When new terms are proposed, or old ones are significantly altered, the rationale for so doing is presented. GAV derived ring strain values for benzene and pyridine indicate that the aromatic stabilization of each is essentially the same. As before, the thermochemical consequences of replacing one functional group by another are also shown, thus permitting quick shortcuts to the estimation of new Δ(f)H(0) values.     

A group additivity methodology for predicting the thermochemistry of oxygen-containing organosilanes

A combinatorial approach was applied to devise a set of reference Si–C–O–H species that is used to derive group-additivity values (GAVs) for this class of molecules. The reference species include 62 stable single-bonded, 19 cyclic, and nine double-bonded Si–C–O–H species. The thermochemistry of these reference species, that is, the standard enthalpy of formation, entropy, and heat capacities covering the temperature range from 298 to 2000 K was obtained from quantum chemical calculations using several composite methods, including G4, G4MP2, and CBSQB3, and the isodesmic reaction approach. To calculate the GAVs from the ab initio based thermochemistry of the compounds in the training set, a multivariable linear regression analysis is performed. The sensitivity of GAVs to the different composite methods is discussed, and thermodynamics properties calculated via group additivity are compared with available ab initio calculated values from the literature.     

Group additivity values for enthalpies of formation (298 K), entropies (298 K), and molar heat capacities (300 K < T < 1500 K) of gaseous fluorocarbons

A group additivity method was developed to estimate standard enthalpies of formation and standard entropies at 298 K of linear radical and closed-shell, gaseous fluorocarbon neutrals containing four or more carbon atoms. The method can also be used to estimate constant pressure molar heat capacities of the same compounds over the temperature range 300 K to 1500 K. Seventeen groups and seven fluorine–fluorine interaction terms were defined from 12 fluorocarbon molecules. Interaction term values from Yamada and Bozzelli [T. Yamada, J.W. Bozzelli, J. Phys. Chem. A 103 (1999) 7373–7379] were utilized. The enthalpy of formation group values were derived from G3MP2 calculations by Bauschlicher and Ricca [C.W. Bauschlicher, A. Ricca, J. Phys. Chem. A 104 (2000) 4581–4585]. Standard entropy and molar heat capacity group values were estimated from ab initio geometry optimization and frequency calculations at the Hartree–Fock level using the 6-31G(d) basis set. Enthalpies of formation for larger fluorocarbons estimated from the group additivity method compare well to enthalpies of formation found in the literature.     

THERM: a computer code for estimating thermodynamic properties for species important to combustion and reaction modeling

A computer package has been developed called THERM, an acronym for THermodynamic property Estimation for Radicals and Molecules. THERM is a versatile computer code designed to automate the estimation of ideal gas phase thermodynamic properties for radicals and molecules important to combustion and reaction-modeling studies. Thermodynamic properties calculated include heat of formation and entropies at 298 K and heat capacities from 300 to 1500 K. Heat capacity estimates are then extrapolated to above 5000 K, and NASA format polynomial thermodynamic property representations valid from 298 to 5000 K are generated. This code is written in Microsoft Fortran version 5.0 for use on machines running under MSDOS. THERM uses group additivity principles of Benson and current best values for bond strengths, changes in entropy, and loss of vibrational degrees of freedom to estimate properties for radical species from parent molecules. This ensemble of computer programs can be used to input literature data, estimate data when not available, and review, update, and revise entries to reflect improvements and modifications to the group contribution and bond dissociation databases. All input and output files are ASCII so that they can be easily edited, updated, or expanded. In addition, heats of reaction, entropy changes, Gibbs free-energy changes, and equilibrium constants can be calculated as functions of temperature from a NASA format polynomial database.     

Thermochemical properties, rotation barriers, and group additivity for unsaturated oxygenated hydrocarbons and radicals resulting from reaction of vinyl and phenyl radical systems with O2

Oxidation of unsaturated and aromatic hydrocarbons in atmospheric and combustion processes results in formation of linear and cyclic unsaturated, oxygenated-hydrocarbon intermediates. The thermochemical parameters delatafH degrees 298, S degrees 298, and C(p)(f298)(T) for these intermediates are needed to understand their stability and reaction paths in further oxidation. These properties are not available for a majority of these unsaturated oxy-hydrocarbons and their corresponding radicals, even via group additivity methods. Enthalpy, entropy, and heat capacity of a series of 40 oxygenated and non-oxygenated molecules, or radicals corresponding to hydrogen atom loss from the parent stable molecules are determined in this study. Enthalpy (delatafH degrees 298 in kcal mol(-1)) is derived from the density function calculations at the B3LYP/6-311g(d,p) calculated enthalpy of reaction (delatafH degrees rxn,298) and by use of isodesmic (work) reactions. Estimation of error in enthalpy delatafH degrees 298, from use of computational chemistry coupled with work reactions analysis, is presented using comparisons between the calculated and literature enthalpies of reaction. Entropies (S degrees 298) and heat capacities (C(p)(f298)(T)) were calculated using the B3LYP/6-311G(d,p) determined frequencies and geometries. Potential barriers for internal rotors in each molecule were determined and used (in place of torsion frequencies) to calculate contributions to S and C(p)(T) from the hindered rotors. Twenty-six groups for use in group additivity (GA) are also developed.     

An additivity scheme for the estimation of heats of formations,entropies, and heat capacities of silanes,polysilanes, and their alkyl derivatives

Heat of formation data available for silanes and alkylsilanes have been evaluated using the Benson-Luria electrostatic energy corrected bond additivity method for a priori calculations of heats of formation of hydrocarbons. It is concluded that the calculational method is applicable to silanes and alkylsilanes, and that the recent combustion measurements employing HF and O₂ are reliable. Group additivity enthalpies based on these data are presented. Results of a large number of statistical thermodynamic calculations of entropies and heat capacities are also given, and values of the group additivities derivable from these results are presented. Internal consistencies of estimated thermodynamic properties (i.e., estimated reaction enthalpy, entropy, and heat capacity changes) are thought to be reliable to within ±1.5 kcal and ±1.0 e.u., respectively. Group additivity estimates for individual compounds could be significantly less accurate due to the limited accuracy and extent of the ΔH⁰_f data base, and to the uncertainties in assigned frequencies and internal rotational barriers employed in calculating entropies and heat capacities.     

Anharmonic thermochemistry of cyclopentadiene derivatives

This paper focuses on the thermochemistry of some derivatives of cyclopenta‐1,3‐diene, namely, 5‐methylcyclopenta‐1,3‐diene, 5‐ethylcyclopenta‐1,3‐diene, 5‐formylcyclopenta‐1,3‐diene, 5‐methylcyclopenta‐1,3‐diene‐1‐yl radical, 5‐ethylcyclopenta‐1,3‐diene‐1‐yl radical, 5‐carbonylcyclopenta‐1,3‐diene radical, 1‐formylcyclopenta‐2,4‐diene‐1‐yl radical, 5‐methylenecyclopenta‐1,3‐diene radical, 5‐ethylidenecyclopenta‐1,3‐diene radical, and 3,6‐dimethylenecyclohexa‐1,4‐diene. Several different chemistries of these compounds are of interest in combustion modeling. Here, we present gas‐phase thermochemical properties for the above cited species, which are, except for 3,6‐dimethylenecyclohexa‐1,4‐diene, previously unknown. These were obtained from corrected (using bond additivity corrections) high‐level ab initio quantum chemistry calculations validated with well‐known compounds including cyclopentane, cyclopentene, cyclopenta‐1,3‐diene, and cyclopentadienyl radical. Heat capacities and entropies have been corrected for anharmonic molecular motions, in particular for internal rotations. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 453–463, 2003     

Thermochemical properties for n‐propyl,iso‐propyl,and tert‐butyl nitroalkanes,alkyl nitrites,and their carbon‐centered radicals

Density functional theory (DFT) based calculations are performed on a series of alkyl nitrites and nitroalkanes representing large‐scale primary, secondary, and tertiary nitro compounds and their radicals resulting from the loss of their skeletal hydrogen atoms. Geometries, vibration frequencies, and thermochemical properties [S°(T) and C°_p(T) (10 K ? T ? 5000 K)] are calculated at the B3LYP/6‐31G(d,p) DFT level. Δ_fH°₂₉₈ values are from B3LYP/6‐31G(d,p), B3LYP/6‐31+G(2d,2p), and the composite CBS‐QB3 levels. Potential energy barriers for the internal rotations have been computed at the B3LYP/6‐31G(d,p) level of theory, and the lower barrier contributions are incorporated into entropy and heat capacity data. The standard enthalpies of formation at 298 K are evaluated using isodesmic reaction schemes with several work reactions for each species. Recommended values derived from the most stable conformers of respective nitro‐ and nitrite isomers include ?30.57 and ?28.44 kcal mol^?1 for n‐propane‐, ?33.89 and ?32.32 kcal mol^?1 for iso‐propane‐, ?42.78 and ?41.36 kcal mol^?1 for tert‐butane‐nitro compounds and nitrites, respectively. Entropy and heat capacity values are also reported for the lower homologues: nitromethane, nitroethane, and corresponding nitrites. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 181–199, 2010     

Computational study of the thermochemistry of organophosphorus(III) compounds

The enthalpies of formation of organophosphorus(III) compounds have been calculated at the G3X, G3X(MP2), and B3LYP/6-311+G(3df,2p)//B3LYP/6-31G(d,p) levels of theory using the atomization energy procedure and the method of isodesmic reactions. The Delta f H298 degree values for 50 relatively large molecules with up to 10 non-hydrogen atoms, such as P(CH3)3, P(C2H5)3, P(OCH3)3, n-C4H9OPCl2, [(CH3)2N]2PCl, (C2H5)2NPCl2, and [(CH3)2N]2PCN, have been calculated directly from the G3X atomization energies. A good agreement between the known experimental values and G3X results for 14 compounds provides support to our predictions for remaining species whose experimental enthalpies of formation are unknown or known with relatively large uncertainties. On the basis of our calculations and sometimes conflicting experimental data a set of internally consistent enthalpies of formation has been recommended for organophosphorus(III) compounds. Our computational results call into question the experimental enthalpies of formation of P(C2H5)3 and P(n-C4H9)3. From comparison with most reliable experimental data, the accuracy of the theoretical enthalpies of formation is estimated as ranging from 5 to 10 kJ/mol. The recommended Delta f H298 degree values were used to derive the group additivity values (GAVs) for 45 groups involving the phosphorus(III) atom. These GAVs significantly extend the applicability of Benson's group additivity method and may be used to estimate the enthalpies of formation of larger organophosphorus(III) compounds, where high level quantum chemical calculations are impracticable.     

Thermochemical property estimation of hydrogenated silicon clusters

The thermochemical properties for selected hydrogenated silicon clusters (Si(x)H(y), x = 3-13, y = 0-18) were calculated using quantum chemical calculations and statistical thermodynamics. Standard enthalpy of formation at 298 K and standard entropy and constant pressure heat capacity at various temperatures, i.e., 298-6000 K, were calculated for 162 hydrogenated silicon clusters using G3//B3LYP. The hydrogenated silicon clusters contained ten to twenty fused Si-Si bonds, i.e., bonds participating in more than one three- to six-membered ring. The hydrogenated silicon clusters in this study involved different degrees of hydrogenation, i.e., the ratio of hydrogen to silicon atoms varied widely depending on the size of the cluster and/or degree of multifunctionality. A group additivity database composed of atom-centered groups and ring corrections, as well as bond-centered groups, was created to predict thermochemical properties most accurately. For the training set molecules, the average absolute deviation (AAD) comparing the G3//B3LYP values to the values obtained from the revised group additivity database for standard enthalpy of formation and entropy at 298 K and constant pressure heat capacity at 500, 1000, and 1500 K were 3.2%, 1.9%, 0.40%, 0.43%, and 0.53%, respectively. Sensitivity analysis of the revised group additivity parameter database revealed that the group parameters were able to predict the thermochemical properties of molecules that were not used in the training set within an AAD of 3.8% for standard enthalpy of formation at 298 K.     

Thermochemical properties and bond dissociation energies of C3-C5 cycloalkyl hydroperoxides and peroxy radicals: cycloalkyl radical + (3)O2 reaction thermochemistry

Cyclic aliphatic hydrocarbons are major components in modern fuels; they can be present in the reactants, and they can be formed during the gas-phase oxidation processes. In combustion and thermal oxidation processes, these cyclics will form radicals that react with (3)O(2) to form peroxy radicals. In this study, density functional theory and higher level ab initio calculations are used to calculate thermochemical properties and bond dissociation energies of 3-5-membered cycloalkanes, corresponding hydroperoxides, hydroperoxycycloalkyl radicals, and cycloalkyl radicals that occur in these reaction systems. Geometries, vibration frequencies, and thermochemical properties, ΔH(f 298)°, are calculated with the B3LYP/6-31 g(d,p), B3LYP/6-31 g(2d,2p), composite CBS-QB3, and G3MP2B3 methods. Standard enthalpies of formation at 298 K are evaluated using isodesmic reaction schemes with several work reactions for each species. Group additivity contributions are developed, and application of group additivity with comparison to calculated values is illustrated. Entropy and heat capacities, S°(T) and C(p)°(T) (5 K ≤ T ≤ 5000), are determined using geometric parameters and frequencies from the B3LYP/6-31 g(d,p) calculations.