多孔氧化物块体材料的制备及其对重金属离子吸附研究进展

目前去除重金属离子的方法较多,其中吸附法因操作简单、经济性好而被广泛使用。多孔氧化物块体材料作为新兴的吸附材料具有比表面积高、机械强度高及可回收性好等特点,但吸附选择性差以及孔结构单一的缺陷限制了其在水体重金属处理中的应用。本文详细叙述了多孔氧化物块体材料的多种制备方法,并分别讨论了各方法的优势及其不足。介绍了近几年研究较多的多孔氧化物块体材料及其制备方法与特性。最后,对多孔氧化物块体材料对Pb、Cd及Cr等重金属离子吸附性能的影响因素及改善措施方面进行了总结分析,并指出多种材料的复合、材料表面的接枝改性及分级多孔结构的构建会增强对重金属离子的吸附性能。期望本文为多孔氧化物块体材料的制备及其在重金属离子吸附方面的应用提供参考。     

光催化还原二氧化碳全反应的研究进展

通过光催化将二氧化碳(CO₂)还原为可持续的绿色太阳能燃料是同时解决环境问题和能源危机的极具前景的方案.尽管迄今为止已经进行了广泛的研究,但实现高转化率、高选择性和高稳定性的光催化二氧化碳还原仍有许多障碍.如将水作为电子供体而非牺牲试剂,能够使反应的吉布斯自由能变ΔG>0,这对于真正实现理想化的人工光合作用至关重要,但同时也会为光催化还原CO₂体系带来更多的挑战.我们首先简要介绍了光催化还原CO₂的机理与挑战,而后根据目前光催化还原CO₂在无牺牲剂体系中出现的问题总结了对应的策略以及最新的研究进展,包括能带结构的调整、助催化剂的负载、异质结的构建、 MOFs与COFs材料的设计等方面,最后对目前仍未解决的问题以及未来实现工业化应用的阻碍进行了总结.     

全固态Z-Scheme光催化材料应用于二氧化碳还原和光催化分解水研究进展

由两种不同的半导体催化剂和电子传输介质建立的Z-Scheme光催化体系,通过在可见光照射下分别在两种半导体催化剂上进行氧化反应和还原反应,实现两步法光催化分解水和二氧化碳还原.相较于离子型Z-Scheme光催化体系,全固态Z-Scheme光催化体系具有适用范围广、无副反应、光源利用率高等特性,具有更加广阔的应用前景.在此,我们简述了Z-Scheme光催化体系的反应机理,综述了全固态Z-Scheme光催化体系在光催化分解水和光催化还原CO₂领域的应用,并对未来全固态Z-Scheme光催化体系的发展进行了展望.     

金属掺杂氧化锌的光催化研究进展

纳米ZnO作为降解污染物的光催化剂,不仅具有成本低、高效、无毒等特点,还能吸收大部分太阳光,是一种性能优异的功能材料。尽管国内外研究人员已经在纳米ZnO光催化材料方面做了大量的工作,但它仍然是研究的热点,因为纳米ZnO除了不同形貌引起的光催化活性变化之外,还可以通过掺杂单金属、多金属和其他金属氧化物,来提高自身光催化活性,并在染料降解、抗菌等方面展示出优异的性能。基于上述背景,总结近年来金属掺杂纳米ZnO对光催化性能的研究进展,为纳米ZnO在光催化方面的研究提供参考。     

乙苯脱氢与二氧化碳转化氧化铝催化剂吸附量热的研究

研究了负载Ｎａ２Ｏ、Ｋ２Ｏ的γ－Ａｌ２Ｏ３催化剂在乙苯（ＥＢ）脱氢与二氧化碳转化耦合反应（ＥＢ＋ＣＯ２ＳＴＹ＋ＣＯ＋Ｈ２Ｏ）的催化活性及生成苯乙烯（ＳＴＹ）的选择性,考察了各种反应条件对催化活性的影响,并以ＮＨ３和ＣＯ２为吸附质运用微分吸附量热法表征了催化剂的表面酸碱性质。结果表明,γ－Ａｌ２Ｏ３具有较多的强酸位和较少的碱位,其对ＮＨ３的起始吸附热为１３５ｋＪｍｏｌ,吸附饱和覆盖度为２５μｍｏｌｍ２;对ＣＯ２的吸附热为１２５ｋＪｍｏｌ,吸附饱和覆盖度为０３μｍｏｌｍ２,γ－Ａｌ２Ｏ３对反应的催化活性较低。而Ｋ２Ｏ／γ－Ａｌ２Ｏ３具有较多的强碱位和较少的酸位,催化活性较好,其对ＮＨ３的起始吸附热为３０ｋＪｍｏｌ,吸附饱和覆盖度为１５０μｍｏｌｍ２;对ＣＯ２的吸附热为１４５ｋＪｍｏｌ,吸附饱和覆盖度为２７μｍｏｌｍ２。因此表明催化剂表面存在的酸、碱中心对反应具有协同作用,强碱中心对ＣＯ２的活化,有利于催化活性和选择性的提高     

多孔材料的研究进展

本文总结了2010~2013国际和国内在无机微孔材料领域的研究进展和亮点,比较了国内外研究的进展,展望了本领域的发展趋势。全文共引用参考文献87篇。     

共价有机框架材料在吸附领域的研究进展

共价有机框架材料(Covalent Organic Frameworks,COFs)是由有机结构单元通过共价键连接的具有期性结构的多孔化合物。共价有机框架材料具有永久的孔隙、高的比表面积、可调的孔径、易于功能化和高的水热稳定性等优点,广泛应用于许多领域。本文总结了COFs目前主要的合成方法,介绍了COFs在吸附领域的应用和发展。最后,文章指出未来的研究重点是发展更多有机反应和键连方式,合成具有高度稳定性和结晶度、成本低廉的功能性材料。     

等离子体催化二氧化碳转化的研究进展*

本文综述了近年来利用等离子体活化及等离子与催化剂协同活化二氧化碳转化的研究进展,同时对其活化机理也进行了讨论,分析了当前等离子体二氧化碳活化法存在的问题,并提出了今后的研究方向。     

二维材料在光催化二氧化碳还原中的研究进展

近几十年来,由温室效应所导致的气候变暖、海平面上升等环境问题日趋严重,科学家们一直致力于研究可高效转化二氧化碳(CO2)等温室气体的技术.以太阳能为驱动力的光催化技术,可将CO2转化成甲烷、甲醇、甲酸或C2+等高附加值的碳氢燃料,同时缓解温室效应和能源危机.二维(2D)材料因具有超大的比表面积和独特的电子结构,在光催化...     

Improved synthesis of porous C2N for CO2 conversion

Since the initial introduction of porous C₂N-h2D materials by the Baek group in 2015, these materials have exhibited highly promising applications in fields such as semiconductor devices, heterogeneous catalysis, gas storage and separation, biomedicine, and more. However, much of the existing research on C₂N materials has been based on theoretical calculations due to the challenges associated with their synthesis. In this study, an enhanced synthesis method for porous C₂N materials has been successfully developed, involving the innovative and nonexplosive synthesis of hexaaminobenzene trihydrochloride (HAB·3HCl) as a crucial intermediate, as well as a time-efficient synthesis of C₂N. Rigorous structural characterizations have been conducted, including solid-state NMR analysis, among others. The resultant C₂N material has been effectively employed to improve the efficiency of CO₂ conversion reactions. This straightforward protocol for synthesizing C₂N materials is poised to stimulate further exploration and application of this promising 2D material in the near future.     

探究超薄Bi2MoO6纳米片高效光催化CO2还原活性

铋系层状半导体材料凭借其独特的表面特性在光催化领域得到广泛的研究及应用,然而在光催化反应过程中光生电荷迁移及其表界面动态变化却鲜见报道。本文中,我们利用准原位X射线光电子能谱仪（QIS-XPS）系统研究超薄Bi2MoO6纳米片光催化CO2还原过程中光生电荷迁移及其表界面演变过程。研究结果表明：在暗态条件下CO2分子吸附于（010）暴露面Bi活性位,由于CO2分子强的拉电子能力,导致内层出现高价态Mo(6 x) 。当光照射至样品表面上时,*CO2峰显著降低,*CO峰明显升高,表明CO2分子在Bi活性位发生活化断键,并与光生电子反应形成*CO,使得高价态Mo(6 x) 含量增大。活性测试表明超薄Bi2MoO6纳米片的CO产量活性为41.8 ?mol g-1 h-1,其比块体Bi2MoO6活性高4.2倍,并且展现出优异的光催化稳定性。该工作为二维层状材料高效光催化CO2还原机理研究提供了一种全新的研究思路。     

ZnIn2S4@CNO多级纳米片用于光催化分解水制氢和还原CO2（英文）

光催化分解水制氢和还原CO2是太阳能利用领域的研究热点,对清洁能源的转化具有重要意义.石墨相氮化碳(CN)作为一种非金属半导体,是一种非常有开发潜力的光催化材料.然而限于其聚合物本质,光催化效率仍有待进一步提高.原位非金属掺杂可以利用元素电子结构调控电荷分布,优化光生电荷传输性能.同时,半导体复合,尤其是2D层状复合结构的构筑,可充分发挥2D半导体的优势,合适的能带交错有利于光生电荷的传输,可在一定程度上加速催化反应的进行.本文首先以草酸为氧掺杂源,采用二步煅烧法合成氧掺杂氮化碳纳米片催化剂(CNO).在二次煅烧和氧掺杂共同作用下,增大了CN层间距和多孔性,颗粒尺寸减小,同时增强了对光的吸光性,拓展了可见光吸收范围.接下来采用一步水热合成法得到ZnIn2S4@CNO(ZC)复合材料,在可见光照射下通过分解水制氢和CO2还原反应对复合材料进行光催化还原性能评价.采用X射线衍射(XRD)、透射电镜(TEM)、X射线光电子能谱(XPS)、荧光光谱(PL)、光电化学测试等方法对ZC进行详细的结构表征和分析.XRD和XPS结果表明,经过一步直接水热可得到层状ZC复合材料,高倍TEM进一步证实二者形成均一的2D异质复合材料.N2-吸附-脱附曲线表明,复合材料具有较大的比表面积和均一的孔结构分布,主要得益于O掺杂CNO纳米片的多孔性结构.光电性质测试结果表明,相比于CNO,复合材料具有降低的荧光发射强度和延长的荧光寿命,表明复合产物显著抑制了光生电荷的复合.电化学测试进一步表明,复合异质结的构筑有利于光生载流子的产生,同时降低了界面电荷转移电阻,提高了电荷迁移速率.因此,多孔2D异质结构的构筑对促进CN基半导体光催化还原具有重要作用.在可见光照射下(λ>400 nm),复合材料表现出优异的光催化还原性能,且随着CNO含量的增加催化活性不断提高,其中ZC 40%(CNO质量比40%)具有最佳的催化活性,其产氢速率达188.4μmol/h,约是ZnIn2S4和CNO的2.1倍.同时,光催化还原CO2测试表明,复合材料具有显著提高的CO和CH4产率,其中CO为主要反应产物.ZC40%的CO产生速率为12.69μmol/h,分别是ZnIn2S4和CNO的2.2倍和14.0倍.对催化剂进行连续光反应,结果表明,复合催化剂具有优异的结构稳定性和活性稳定性,能够持续发生光还原反应制取H2和CO.     

Nickel and potassium co-modified β-Mo2C catalyst for CO conversion

Nickel and potassium co-medified β-Mo2C catalysts were prepared and used for CO hydrogenation reaction. The major products over β-Mo2C were C1-C4 hydrocarbons, only few alcohols were obtained. Addition of potassium resulted in remarkable selectivity shift from hydrocarbons to alcohols at the expense of CO conversion over β-Mo2C. Moreover, it was found that potassium enhanced the ability of chain propagation with a higher C2+OH production. Modified by nickel, β-Mo-2C showed a relatively high CO conversion, however, the products were similar to those of pure β-Mo2C. When co-modified by nickel and potassium,β-Mo2C exhibited high activity and selectivity towards mixed alcohols synthesis, and also the whole chain propagation to produce alcohols especially for the stage of C1OH to C2OH was remarkably enhanced. It was concluded that the Ni and K had, to some extent, synergistic effect on CO conversion.     

单原子催化剂在CO2转化中的应用

单原子催化剂(SAC)是由互相隔离分散的原子级活性位点锚定在基底上而形成的一类新兴催化剂材料, 其具有最大化的原子利用率、 可调控的独特电子结构, 因而在热催化、 光催化及电催化等方面展现出良好的应用前景. 通过SAC的热/光/电催化CO₂转化反应(CCR)能将温室气体CO₂转化为燃料或具有附加值的化学品, 为解决严重的全球变暖和能源短缺问题提供了一种有效策略. 本文总结了近年来SAC在CO₂转化领域的研究进展, 讨论了其合成、 调控及催化各类CO₂转化反应的优缺点, 并对其未来的发展进行了展望.     

Effect of CO2 adsorbents on the Ni-based dual-function materials for CO2 capturing and in situ methanation

The present work studied the effect of different carbon dioxide (CO₂) adsorbents on Ni-based dual-function materials (DFMs) for the development of carbon capture and on-site utilization in a reactor at isothermal condition. The DFMs containing Ni functioning as a methanation catalyst with various CO₂ adsorbents (i.e., CaO, MgO, K₂CO₃, or Na₂CO₃) were prepared on γ-Al₂O₃ through sequential impregnation. The result indicated that Ni-Na₂CO₃/γ-Al₂O₃ had the highest methanation capacity (i.e., 0.1783 mmol/g) and efficiency (i.e., 71.09%) in the CO₂ adsorption–methanation test. The CO₂ uptake and the subsequent methanation capacity of the Ni-Na₂CO₃/γ-Al₂O₃ increased to more than 24 times and more than 17 times, respectively, compared to Ni/γ-Al₂O₃. The high methanation capacity was correlated to its highest amount of weak basic sites, substantial CO₂ capture capacity and capture/release efficiency, and reactivity to H₂ at a lower temperature, supported by CO₂-TPD, TGA analyses for adsorption or adsorption–desorption at the isothermal condition, and H₂-TPRea, respectively. A continuous cyclic CO₂ adsorption–methanation was performed by using the Ni-Na₂CO₃/γ-Al₂O₃ and Ni-CaO/γ-Al₂O₃, showing that the CO₂ adsorption capacity was stabilized from third cycle onward, whereas the methanation capacity was stabilized at all cycles, indicating the high stability of the DFMs for both CO₂ adsorption and subsequent methanation. This work demonstrated successful synthesis of the Ni-based, low-cost, and stable DFMs with the ability to produce methane via the direct capture of CO₂.     

Novel Porous Aromatic Framework with Excellent Separation Capability of CO2 in N2 or CH4

A novel porous aromatic framework, PAF-52, was obtained via the polymerization of tetrahedral mono- mer tetrakis（4-cyanodiphenyl） methane（TCDPM） with the aid of a facile ionothermal method. PAF-52 has a surface area of 1159 m2/g（BET）, and shows a considerable high separation ability of CO2 in N2 or CH4 respectively at room temperature, using gas-chromatography experiments as evidence,     

Kinetic features of the steady state photocatalytic CO oxidation by air on TiO2

The paper reports quantum efficiency dependence of the steady state gas phase photocatalytic oxidation of CO over dispersed anatase on CO and CO₂ concentrations, temperature and UV light intensity. A tentative mechanism of the process is proposed.     

Nickel and potassium co-modified β-Mo2C catalyst for CO conversion

Nickel and potassium co-modified -Mo2C catalysts were prepared and used for CO hydrogenation reaction. The major products over -Mo2C were C1–C4 hydrocarbons, only few alcohols were obtained. Addition of potassium resulted in remarkable selectivity shift from hydrocarbons to alcohols at the expense of CO conversion over -Mo2C. Moreover, it was found that potassium enhanced the ability of chain propagation with a higher C2+OH production. Modified by nickel, -Mo2C showed a relatively high CO conversion, however, the products were similar to those of pure -Mo2C. When co-modified by nickel and potassium, -Mo2C exhibited high activity and selectivity towards mixed alcohols synthesis, and also the whole chain propagation to produce alcohols especially for the stage of C1OH to C2OH was remarkably enhanced. It was concluded that the Ni and K had, to some extent, synergistic effect on CO conversion.