GaN/GaAs(1 0 0) superlattices grown by metalorganic vapor phase epitaxy using dimethylhydrazine precursor

Superlattices of cubic gallium nitride (GaN) and gallium arsenide (GaAs) were grown on GaAs(1 0 0) substrates using metalorganic vapor phase epitaxy (MOVPE) with dimethylhydrazine (DMHy) as nitrogen source. Structures grown at low temperatures with varying layer thicknesses were characterized using high resolution X-ray diffraction and atomic force microscopy. Several growth modes of GaAs on GaN were observed: step-edge, layer-by-layer 2D, and 3D island growth. A two-temperature growth process was found to yield good crystal quality and atomically flat surfaces. The results suggest that MOVPE-grown thin GaN layers may be applicable to novel GaAs heterostructure devices.     

Atomic ordering in GaAsSb (0 0 1) grown by metalorganic vapor phase epitaxy

Epitaxial GaAsSb (0 0 1) semiconductor alloys grown by metalorganic vapor phase epitaxy exhibit several spontaneously ordered structures. A superlattice structure with three-fold ordering in the [1 1 0] direction has been previously observed by different groups. CuAu structures with (1 0 0) and (0 1 0) ordering planes have also been reported. The physical origin of CuAu ordering in III–V semiconductors has not yet been explained. In this work we report the effect of growth conditions on CuAu ordering in GaAsSb, including miscut from (0 0 1), growth rate, bismuth surfactant concentration, and growth temperature. These data point to a surface kinetic mechanism not based on dimer strain, but possibly due to one-dimensional ordering at step edges.     

The photoluminescence of ZnO thin films grown on Si (1 0 0) substrate by plasma-enhanced chemical vapor deposition

High-quality ZnO thin films have been grown on a Si(1 0 0) substrate by plasma-enhanced chemical vapor deposition (PECVD) using a zinc organic source (Zn(C₂H₅)₂) and carbon dioxide (CO₂) gas mixtures at a temperature of 180°C. A strong free exciton emission with a weak defect-band emission in the visible region is observed. The characteristics of photoluminescence (PL) of ZnO, as well as the exciton absorption peak in the absorption spectra, are closely related to the gas flow rate ratio of Zn(C₂H₅)₂ to CO₂. Full-widths at half-maximum of the free exciton emission as narrow as 93.4 meV have been achieved. Based on the temperature dependence of the PL spectra from 83 to 383 K, the exciton binding energy and the transition energy of free excitons at 0 K were estimated to be 59.4 meV and 3.36 eV, respectively.     

Effects of growth temperature on the properties of ZnO/GaAs prepared by metalorganic chemical vapor deposition

A series of ZnO films were grown on GaAs(0 0 1) substrates at different growth temperatures in the range 250–720°C by metalorganic chemical vapor depostion. Field emission scanning electron microscopy was utilized to investigate the surface morphology of ZnO films. The crystallinity of ZnO films was investigated by the double-crystal X-ray diffractometry. The optical and electrical properties of ZnO films were also investigated using room-temperature photoluminescence and Hall measurements. Arrhenius plots of the growth rate versus reciprocal temperature revealed the kinetically limited growth behavior depending on the growth temperature. It was found that the surface morphology, structural, optical and electrical properties of the films were improved with increasing growth temperature to 650°C. All the properties of the film grown at 720°C were degraded due to the decomposition of ZnO film.     

Transmission electron microscopy study of an AlN nucleation layer for the growth of GaN on a 7-degree off-oriented (0 0 1) Si substrate by metalorganic vapor phase epitaxy

We have investigated the morphology of the high-temperature-grown AlN nucleation layer and its role in the early stage of GaN growth, by means of transmission electron microscopy. The nitride was selectively grown on a 7-degree off-oriented (0 0 1) patterned Si substrate by metalorganic vapor phase epitaxy. AlN was deposited on the inclined unmasked (1 1 1) facet in the form of islands. The size of the islands varied along the slope, which is attributable to the diffusion of the growth species in the vapor phase. The GaN nucleation occurred at the region where rounded AlN islands formed densely. The threading dislocations were observed to generate in the GaN nucleated region.     

Material characteristics of metalorganic chemical vapor deposition of Bi2Te3 films on GaAs substrates

Metal organic chemical vapor deposition has been investigated for growth of Bi₂Te₃ films on (0 0 1) GaAs substrates using trimethylbismuth and diisopropyltelluride as metal organic sources. The results of surface morphology, electrical and thermoelectric properties as a function of growth parameters are given. The surface morphologies of Bi₂Te₃ films were strongly dependent on the deposition temperatures. Surface morphologies varied from step-flow growth mode to island coalescence structures depending on deposition temperature. In-plane carrier concentration and electrical Hall mobility were highly dependent on precursor's ratio of VI/V and deposition temperature. By optimizing growth parameters, we could clearly observe an electrically intrinsic region of the carrier concentration at the temperature higher than 240 K. The high Seebeck coefficient (of −160 μVK⁻¹) and good surface morphology of this material is promising for Bi₂Te₃-based thermoelectric thin film and two-dimensional supperlattice device applications.     

Photocurrent measurements on GaAs1−xNx epilayers grown by metalorganic chemical vapor deposition

GaAs_1−xN_x epilayers were grown on a GaAs(0 0 1) substrate by metalorganic chemical vapor deposition. Composition was determined by high resolution X-ray diffraction. Band gap was measured from 77 to 400 K by using photocurrent measurements. The photocurrent spectra show clear near-band-edge peak and their peak energies drastically decrease with increasing nitrogen composition due to band gap bowing in the GaAs_1−xN_x epilayers. Those red shifts were particularly notable for low nitrogen compositions. However, the shifts tended to saturate when the nitrogen composition become higher than 0.98%. When the nitrogen composition is in the range 1.68–3.11%, the measured temperature dependence of the energy band gap was nicely fitted. However, the properties for the nitrogen composition range 0.31–0.98% could not be fitted with a single fitting model. This result indicates that the bowing parameter reaches 25.39 eV for low nitrogen incorporation (x=0.31%), and decreases with increasing nitrogen composition.     

Correlations between photoluminescence and Hall mobility in GaN/sapphire grown by metalorganic chemical vapor deposition

We have investigated photoluminescence (PL) and electron Hall mobility for unintentionally doped GaN epitaxial layers grown by low-pressure metalorganic chemical vapor deposition on c-plane Al₂O₃ substrates. Four GaN films having identical dislocation density but remarkably different electron Hall mobility were exploited. At low temperature (12 K), a PL line associated with a bound exciton was observed and strong correlations were found between the Hall mobility and the PL intensity of the exciton transition. That is, relative PL intensity of the bound exciton to a donor-bound exciton monotonously increased with decreasing the electron mobility of the GaN films. This correlation was interpreted in terms of electrical compensation. Efforts to find the chemical origin of the PL line led to the conclusion that the BE line originated neither from threading dislocations nor from extrinsic point defects. Intrinsic acceptors such as Ga vacancy and GaN anti-site were suspected as plausible origin.     

Selective area growth of GaN microstructures on patterned (1 1 1) and (0 0 1) Si substrates

Selective MOVPE growth of GaN microstructure on silicon substrates has been investigated using SiO₂ mask having circular or stripe window. In case of (0 0 1)substrate, grooves with (1 1 1) facets at the sides were made by using the etching anisotropy of a KOH solution. On the (1 1 1) facets of patterned silicon substrate (or on the as opened window region of (1 1 1) substrate), growth of wurtzite GaN was performed, of which the c-axis is oriented along the 1 1 1 axis of silicon. The photoluminescence and X-ray diffraction analysis were performed to characterize the single crystal to reveal the effect of the growth conditions of the intermediated layer and the microstructure.     

Predicted nitrogen doping concentrations in silicon carbide epitaxial layers grown by hot-wall chemical vapor deposition

A simple quantitative model for the surface adsorption of nitrogen has been developed to simulate the doping incorporation in intentionally doped 4H–SiC samples during epitaxial growth. Different reaction schemes are necessary for the two faces of SiC. The differences are discussed, and implications to the necessary model adjustments are stressed. The simulations are validated by experimental values for a large number of different process parameters with good agreement.     

Control of the morphology of InGaN/GaN quantum wells grown by metalorganic chemical vapor deposition

Various techniques for morphological evolution of InGaN/GaN multiple quantum well (MQW) structures grown by metalorganic chemical vapor deposition have been evaluated. Atomic force microscopy, photoluminescence (PL) and X-ray diffraction measurements have been used for characterization. It is shown that inclusions, that are generated into the V-defects in the InGaN quantum wells (QW), can be removed by introducing a small amount of hydrogen during the growth of GaN barriers. This hydrogen treatment results in partial loss of indium from the QWs, but smooth surface morphology of the MQW structure and improved optical quality of InGaN wells are obtained. The density of the V-defects could be reduced by reducing the dislocation density of the underlying GaN buffer.     

Enhanced two-dimensional growth of MOVPE InN films on sapphire (0 0 0 1) substrates

MOVPE growth of InN on sapphire substrates is compared using two different designs of horizontal reactor. The major difference between the two designs is a variation in the reactant-gas flow-spacing between the substrate and the ceiling of the quartz chamber: 33 mm for the Type A reactor and 14 mm for Type B. Compared with the Type A reactor, the Type B reactor brings about InN films with a larger grain size. This is especially true when InN is grown at 600°C using the Type B reactor, in which case the two-dimensional (2D) growth of InN is found to be extremely enhanced. An investigation of the NH₃/TMIn molar ratio dependence of the surface morphology of grown InN films using the two reactors suggests that the enhanced 2D growth is attributed to the decrease in the effective NH₃/TMIn ratio in the growth atmosphere. Even using the Type A reactor, a film with enhanced 2D growth can be obtained when the NH₃/TMIn ratio is considerably low (1.8×10⁴). The enhanced 2D growth results in a smaller XRC-FWHM (full-width at half maximum of the X-ray rocking curve) (1500 arcsec), than that for a 3D-grown film (5000 arcsec).     

Tetragonal tungsten oxide nanobelts synthesized by chemical vapor deposition

Tungsten trioxide (WO₃) nanobelts in tetragonal structure were grown on Si substrates by a hot-wall chemical vapor deposition (CVD) method without using catalysts. The products were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, and photoluminescence (PL) spectrum. The width of the nanobelts is in the range of 50–100 nm with width-to-thickness ratios of 5–10 and lengths of up to tens of micrometers. These nanobelts grew along the [0 0 1] direction and can be identified as the tetragonal WO₃ structures. Raman and PL measurements indicate the high quality of the nanobelts. The vapor–solid growth mechanism could be applicable in our experiment.     

Influence of AlGaN/GaN/InGaN superlattice on the characteristics of LEDs grown by metalorganic chemical vapor deposition

This study examined the influence of strain-compensated triple AlGaN/GaN/InGaN superlattice structures (SLs) in n-GaN on the structural, electrical and optical characteristics of LEDs by analyzing the etch pits density (EPD), stress measurement, high-resolution X-ray diffraction (HRXRD), sheet resistance, photoluminescence (PL) and light–current–voltage (L–I–V). EPD, stress measurement and HRXRD studies showed that the insertion of AlGaN/GaN/InGaN SLs during the growth of n-GaN effectively distributed and compensated for the strong compressive stress, and decreased the dislocation density in n-GaN. The operating voltage at 20 mA for the LEDs grown with SLs decreased to 3.18 V from 3.4 V for the LEDs grown without SLs. In addition, a decrease in the spectral blue shift compared to the LEDs grown without SLs was observed in the LEDs grown with the SLs.     

Subtle interplay between polytypism and preferred growth direction alignment in GaN nanorods non-catalytically grown on Si(1 1 1) substrates by using hydride vapor phase epitaxy

GaN nanorods were grown on Si(1 1 1) substrates by using hydride vapor phase epitaxy, and the crystallographic characteristics associated with their preferred growth directions were investigated by utilizing synchrotron X-ray reciprocal space mapping in a grazing incidence geometry and scanning electron microscopy. Crystallographic analysis reveals that the nanorods containing both wurtzite and zinc blende phase tend to have narrower distribution of the preferred growth directions than those containing only wurtzite phase. This tendency is partly attributed to the subtle interplay between polytypism and the preferred growth directions of GaN nanorods.     

Heteroepitaxial growth of Cu2O thin film on ZnO by metal organic chemical vapor deposition

Cuprous oxide (Cu₂O) thin films were grown epitaxially on c-axis-oriented polycrystalline zinc oxide (ZnO) thin films by low-pressure metal organic chemical vapor deposition (MOCVD) from Copper(II) hexafluoroacetylacetonate [Cu(C₅HF₆O₂)₂] at various substrate temperatures, between 250 and 400 °C, and pressures, between 0.6 and 2.1 Torr. Polycrystalline thin films of Cu₂O grow as single phase with [1 1 0] axis aligned perpendicular to the ZnO surface and with in-plane rotational alignment due to (2 2 0)_Cu2O(0 0 0 2)_ZnO; [0 0 1]_Cu2O[1 2¯ 1 0]_ZnO epitaxy. The resulting interface is rectifying and may be suitable for oxide-based p–n junction solar cells or diodes.     

Formation of Ge-diffusion-suppressed GaAs layers and InAs quantum dots on Ge/Si substrates

Crystal growth of GaAs layers and InAs quantum dots (QDs) on the GaAs layers was investigated on Ge/Si substrates using ultrahigh vacuum chemical vapor deposition. Ga-rich GaAs with anti-site Ga atoms grown at a low V/III ratio was found to suppress the diffusion of Ge into GaAs. S-K mode QD formation was observed on GaAs layers grown on Ge/Si substrates with Ga-rich GaAs initial layers, and improved photoluminescence from 1.3 μm-emitting InAs QDs was demonstrated.     

Influence of AlN nucleation layer growth conditions on quality of GaN layers deposited on (0 0 0 1) sapphire

The influence of AlN nucleation layer (NL) growth conditions on the quality of GaN layer deposited on (0 0 0 1) sapphire by organometallic chemical vapor phase epitaxy (OMVPE) has been investigated by X-ray diffraction, atomic force microscopy and transmission electron microscopy. Growth pressure, temperature and time were varied in this study. Results indicate that there exists an optimal thickness of the NL is required for optimal growth. Both thin and thick NLs are not conducive to the growth of high-quality GaN layers. Arguments have been developed to rationalize these observations.     

InP/InGaAlAs distributed Bragg reflectors grown by low-pressure metal organic chemical vapor deposition

Long-wavelength vertical cavity surface emitting lasers (VCSELs) are considered the best candidate for the future low-cost reliable light sources in fiber communications. However, the absence of high refractive index contrast in InP-lattice-matched materials impeded the development of 1.3–1.5 μm VCSELs. Although wafer fusions provided the alternative approaches to integrate the InP-based gain materials with the GaAs/AlAs materials for their inherent high refractive index contrast, the monolithic InP-based lattice-matched distributed Bragg reflectors (DBRs) are still highly attractive and desirable. In this report, we demonstrate InP/InGaAlAs DBRs with larger refractive index contrast than InP/InGaAsP and InAlAs/InGaAlAs DBRs. The switching between InP and InGaAlAs layers and growth rate control have been done by careful growth interruption technique and accurate in situ optical monitoring in low-pressure metal organic chemical vapor deposition. A 35 pairs 1.55 μm centered InP/InGaAlAs DBRs has the stopband of more than 100 nm and the highest reflectivity of more than 99%. A VCSEL structure incorporating 35 pairs InP/InGaAlAs DBR as the bottom mirror combined with a 2λ thick periodic gain cavity and 10 pairs SiO₂/TiO₂ top dielectric mirrors was fabricated. The VCSELs lased at 1.56 μm by optical pumping at room temperature with the threshold pumping power of 30 mW.