A Laser Flash Apparatus for Thermal Diffusivity and Specific Heat Capacity Measurements

We have developed a laser flash apparatus for simultaneous measurements of thermal diffusivity and specific heat capacity of solid materials by introducing recent technical progress: uniform heating by a homogenized laser beam using an optical fiber with a mode mixer, measuring transient temperature of a specimen with a calibrated radiation thermometer, analyzing a transient temperature curve with a curve fitting method, to achieve differential laser flash calorimetry. Thermal diffusivity, specific heat capacity and thermal conductivity of glassy carbon and molybdenum were measured in the temperature range from 300 to 1100 K. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal diffusivity and thermal conductivity studies on the zirconate,cerate and uranate of barium

The thermal diffusivity and thermal conductivity of the zirconate, cerate and uranate of barium were investigated by employing the laser flash technique. The variation in the thermal resistivity as a function of temperature was examined and the heat transport behaviour of these materials is discussed.     

Intercomparison of thermal conductivity and thermal diffusivity methods for plastics

An intercomparison of measurements of the thermal conductivity and thermal diffusivity of two poly(methyl methacrylates) is reported. A wide variety of methods were used: temperature wave analysis, laser flash, transient plane source (Hot Disk^®), transient line-source probe, and heat flux meter methods. Very good agreement of thermal conductivity results and, separately, of thermal diffusivity results was obtained. Similarly, good agreement between thermal conductivity and thermal diffusivity results, when converted using specific heat capacity and density values, was also obtained. Typically, the values were within a range of approximately ±10%. Considering the significant differences between the methods and the requirements on specimen dimensions, the level of agreement between results was considered to be good.     

Noncontact measurement of thermal and optical parameters of biological tissues and materials using IR laser radiometry

A technique for simultaneous measurements of the thermal diffusivity, specific heat, and effective absorbtion coefficient was developed. The technique is based on local heating of a sample by laser radiation and thermal imager measurement of the temperature field dynamics in the surface layer in both the heating and cooling stages. The technique includes a program for calculating the laser-induced temperature field in the sample volume and the determination of three parameters by the Levenberg-Marquardt algorithm to provide the best fit of calculations to experimental results. The statistical error of thermal diffusivity, specific heat, and effective absorbtion coefficient measurements was 5–6%. The technique efficiency was demonstrated by the example of the development of a thermal and optical equivalent of cartilage tissue, based on polyacrylamide hydrogel.     

Advances in pulsed-laser atom probe: instrument and specimen design for optimum performance.

The performance of the pulsed-laser atom probe can be limited by both instrument and specimen factors. The experiments described in this article were designed to identify these factors so as to provide direction for further instrument and specimen development. Good agreement between voltage-pulsed and laser-pulsed data is found when the effective pulse fraction is less than 0.2 for pulsed-laser mode. Under the conditions reported in this article, the thermal tails of the peaks in the mass spectra did not show any significant change when produced with either a 10-ps or a 120-fs pulsed-laser source. Mass resolving power generally improves as the laser spot size and laser wavelength are decreased and as the specimen tip radius, specimen taper angle, and thermal diffusivity of the specimen material are increased. However, it is shown that two of the materials used in this study, aluminum and stainless steel, depend on these factors differently. A one-dimensional heat flow model is explored to explain these differences. The model correctly predicts the behavior of the aluminum samples, but breaks down for the stainless steel samples when the tip radius is large. A more accurate three-dimensional model is needed to overcome these discrepancies.     

Development of a thermal conductivity cell with nanolayer coating for thermal conductivity measurement of fluids

Various techniques and methodologies of thermal conductivity measurement have been based on the determination of the rate of directional heat flow through a material having a unit temperature differential between its opposing faces. The constancy of the rate depends on the material density, its thermal resistance and the heat flow path itself. The last of these variables contributes most significantly to the true value of steady-state axial and radial heat dissipation depending on the magnitude of transient thermal diffusivity along these directions. The transient hot-wire technique is broadly used for absolute measurements of the thermal conductivity of fluids. Refinement of this method has resulted in a capability for accurate and simultaneous measurement of both thermal conductivity and thermal diffusivity together with the determination of the specific heat. However, these measurements, especially those for the thermal diffusivity, may be significantly influenced by fluid radiation. Recently developed corrections have been used to examine this assumption and rectify the influence of even weak fluid radiation. A thermal conductivity cell for measurement of the thermal properties of electrically conducting fluids has been developed and discussed.     

Thermophysical properties of oil shale minerals

The thermal diffusivity values of eight minerals that are commonly associated with oil shales of the Green River formation have been measured by the laser flash technique. Data are presented in the temperature range 25–500°C for quartz, dolomite, calcite, plagioclase, analcite, pyrite, potassium feldspar and low albite. A comparison of the thermal conductivities of some of these minerals, calculated from experimentally measured thermal diffusivity and density, with the experimental values reported in the literature reveals good agreement. Trends in the variation of thermal diffusivity with temperature and anisotropic effects in thermophysical parameters are discussed from the point of view of grain boundary effects in these polycrystalline mineral aggregates.     

Thermophysical properties of polypropylene/aluminum composites

This article is dedicated to the study of the thermal parameters of composite materials. A nonlinear least‐squares criterion is used on experimental transfer functions to identify the thermal conductivity and the diffusivity of aluminum‐polymer composite materials. The density measurements were achieved to deduce the specific heat and thereafter they were compared to values given by differential scanning calorimetry measurement. The thermal parameters of the composite material polypropylene/aluminum were investigated for the two different types of aluminum filler sizes. The experimental data were compared with several theoretical thermal conductivity prediction models. It was found that both the Agari and Bruggeman models provide a good estimation for thermal conductivity. The experimental values of both thermal conductivity and diffusivity have shown a better heat transport for the composite filled with large particles. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 722–732, 2004     

Effect of some metallic additives (Ag, Cd, and Sn) on thermal transport properties of a-Se

In this study, we have studied the effect of elements Ag, Cd, and Sn as chemical modifiers on some thermal transport properties (thermal conductivity, diffusivity, and specific heat per unit volume) of amorphous Se. Concurrent measurements of thermal transport properties such as effective thermal conductivity (??_e), thermal diffusivity (??_e), and specific heat per unit volume (??C _v) are used at room temperature for twin pellets of pure Se- and Se-based binary Se₉₈M₂ (M?=?Ag, Cd, and Sn) alloys using transient plane source technique. We have also determined the thermal inertia I _T using the experimental values of thermal conductivity and specific heat per unit volume for present amorphous alloys. The increasing sequence of measured thermal transport properties is also discussed.     

Thermal diffusivity measurement of ceramic materials used in spraying of TBC systems

The basic goal of this article was thermal diffusivity characterization of ceramic materials used in thermal barrier coating (TBC) systems for depositions of the insulation layer and characterization of the materials’ morphology and remanufacturing process. The base material was oxide 8YSZ (ZrO_2? ×?8Y₂O₃), which is usually dedicated to deposition of an insulating top layer in TBC systems. The data related to thermal properties such as thermal diffusivity and thermal conductivity are widely presented in the literature, but there is lack of information about the morphological form of investigated materials, and the presented results vary widely. Data on thermal properties based on the literature sources are inadequate for the real morphological form of materials used in the experiment (e.g., massive or single crystalline material vs. plasma-sprayed coatings), which consequently gives an unsatisfactory accuracy of the obtained numerical simulations by MES methods. This article presents the characterization of thermal diffusivity of the commercial 8YSZ ceramic material synthesized or remanufactured by different routes, which is investigated in the forms of pressed powder pellet (two commercial nano-sized powders with different morphologies), sintered pellets (one commercial powder, solid-state co-precipitated reacted powder of 8YSZ type), and a two-layered coating system of In625?+?NiCrAlY/8YSZ type. The range of analysis included morphological investigations of different types of powders in initial conditions and after remanufacturing (sintering, thermal spraying) as well as the thermal diffusivity analysis by the laser flash method. The obtained data were corrected by porosity factor and compared to each other. The best similarity for obtained thermal diffusivity data was found for commercial powers of HOSP^TM type after pressing and sintering processes and calculated (2-layered model) value of thermal diffusivity for two-layered system of In625/8YSZ TBS system. The results showed that there are significant differences in thermal diffusivity values for materials with different morphological forms.

     

Thermal diffusivity of polymer films by the flash radiometry method

We have developed a flash radiometry technique for the determination of the thermal diffusivity of polymer films that consists of flashing a laser pulse on the front surface of the sample and monitoring the thermal radiation from the rear surface as a function of time using an infrared detector. This method is applicable to polymer films of thickness 14–250 μm in the wide temperature range between 150 and 500 K. We have performed measurements on four polymers, including polycarbonate, polyimide, polyvinylidene fluoride, and polyethylene terephthalate. The temperature dependence of the thermal conductivity of polycarbonate can be understood by considering the phonon mean free path, and the crystallinity and orientation dependence of the thermal conductivity of polyethylene terephthalate can be explained in terms of the two-phase model proposed by Choy and Young.     

Thermal characterization by photodeflection method

The photodeflection technique is useful not only for thermal diffusivity measurements but also to supply a thermal imaging system. The experimental setup and the basic theoretical aspects for determining the temperature profile are discussed together with the experimental results on a semiconductor laser diode.     

Characterization of very low thermal conductivity thin films

Characterization of thermal transport in nanoscale thin films with very low thermal conductivity (<1 W m^?1 K^?1) is challenging due to the difficulties in accurately measuring spatial variations in temperature field as well as the heat losses. In this paper, we present a new experimental technique involving freestanding nanofabricated specimens that are anchored at the ends, while the entire chip is heated by a macroscopic heater. The unique aspect of this technique is to remove uncertainty in measurement of convective heat transfer, which can be of the same magnitude as through the specimen in a low conductivity material. Spatial mapping of temperature field as well as the natural convective heat transfer coefficient allows us to calculate the thermal conductivity of the specimen using an energy balance modeling approach. The technique is demonstrated on thermally grown silicon oxide and low dielectric constant carbon-doped oxide films. The thermal conductivity of 400 nm silicon dioxide films was found to be 1.2 W m^?1 K^?1, and is in good agreement with the literature. Experimental results for 200 nm thin low dielectric constant oxide films demonstrate that the model is also capable of accurately determining the thermal conductivity for materials with values <1 W m^?1 K^?1.     

Measurement of thermal diffusivity and specific heat capacity of polymers by laser flash method

We measured thermal diffusivity and heat capacity of polymers by laser flash method, and the effects of measurement condition and sample size on the accuracy of the measurement are discussed. Thermal diffusivities of PTFE films with thickness 200–500 μm were the same as those data that have been reported. But, the data for film thickness less than 200 μm have to be corrected by an equation to cancel thermal resistance between sample film and graphite layers for receiving light and detecting temperature. Thermal diffusivity was almost unaffected by the size of area vertical to the direction of laser pulse, because heat flow for the direction could be negligible. Specific heat capacity of polymer film was exactly measured at room temperature, provided that low absorbed energy (< 0.3 J) and enough sample mass (> 25 mg) were satisfied as measuring conditions. Thermal diffusivity curve of PS or PC versus temperature had a terrace around T_g, whereas that of PE decreased monotonously with increasing in temperature until T_m. Further, we estimated relative specific heat capacity (RC_p) by calculating ratios of heat capacities at various temperatures to the one at 299 K. RC_p for PS obtained by laser flash method was larger than that obtained by DSC method, whereas the RC_ps for PE obtained by the both methods agreed with one another until T_m (305 K). RC_p for PS decreased linearly, with increase in temperature after it increased linearly until T_g (389 K), showing similarity to temperature dependency of thermal conductivity. RC_p for PE also decreased until T_m, similar to thermal conductivity. ©1995 John Wiley & Sons, Inc.     

Enhanced thermal conductivity of rheologically percolated carbon nanofiber reinforced polypropylene composites

Three different types of carbon nanofibers (CNF) were incorporated in the same polypropylene (PP) matrix by twin‐screw extrusion. The rheological and thermal properties were investigated. The rheological characterization of CNFs/PP composites as function of their volume fraction shows different microstructures: percolated and non‐percolated behaviors of their CNF's networks. In this work, the laser flash technique is employed in the experimental determination of the thermal diffusivity and conductivity of composites at room temperature. The ultimate aim is to correlate microstructure described by rheological analysis with final thermal properties. The results show that thermal diffusivity and conductivity are clearly higher for rheologically percolated composites suggesting that above certain critical content of nanofibers thermal transport is mainly controlled by percolated structures caused by interconnected CNFs' networks. Finally, thermal conductivity results are described by means of percolation theory from which an intrinsic thermal conductivity for the CNFs' network of approximately 6.5 W/m K, i.e. close to three times lower than some values reported in literature for SWCNTs' networks, was calculated. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel approach for thermal diffusivity measurements in inert atmosphere using the flash method

Determining the thermal conductivity is crucial whenever heat transfer issues are considered which play a major role in many technological applications. However, various materials are sensitive to oxygen or moisture and, therefore, cannot be examined with commonly used equipment under ambient conditions. Here, we present a novel approach which combines the inert requirements of ambient-sensitive specimens with the flash method in which the apparatus, a Netzsch LFA 447 NanoFlash^®, is placed under ambient conditions. A new measuring cell with flash-transparent windows was constructed which resembles a gas-tight specimen chamber. This device can be easily adapted to other apparatuses based on the flash method. The thermal conductivities of reference materials in inert and ambient conditions were examined in a temperature range from 25 to 275 °C. In general an excellent agreement was found. Further, the usability of this special sample cell is demonstrated for the investigation of the thermal conductivities of two complex hydride systems which are important for solid-state hydrogen storage applications.     

Temperature dependence of the thermophysical properties of polycrystallene chalcogenide glasses

The specific heat (C _p), thermal conductivity (λ), thermal diffusivity (a), and electrical conductivity (σ) were measured for polycrystalline HgS and Sb₂S₃ in the temperature range 300–600 K. The measurements were performed with an experimental apparatus based on a socalled flash method. The results showed that the mechanism of heat transfer is mainly due to phonons, whereas the contribution of electrons and bipolars is very small indeed. The energy gap of the samples was also calculated.     

Fluid radiation effects in the transient hot-wire technique

The transient hot-wire technique is widely used for absolute measurements of the thermal conductivity of fluids. Refinement of this method has resulted in a capability for accurate and simultaneous measurement of both thermal conductivity and thermal diffusivity together with a determination of the specific heat. However, these measurements, especially those for the thermal diffusivity, may be significantly influenced by fluid radiation. The present work investigates the effect of fluid radiation on the measurements of the thermal conductivity of propane. Recently developed corrections have been used to examine this assumption and rectify the influence of even weak fluid radiation. Measurements at 372 K with a hot-wire instrument demonstrate the presence of radiation effects in both the liquid and vapor phase. The influence is much more pronounced in liquid propane at 15.5 MPa than in the vapor phase at 881.5 kPa. The technique employed to obtain radiation-free thermal conductivity measurements is described.     

Applications of some thermo-analytical techniques to glasses and polymers

Thermal characterization of materials provides conclusions regarding the identification of materials as well as their purity and composition, polymorphism, and structural changes. Analytical experimental techniques for thermal characterization comprise of a group of techniques, in which physical properties of materials are ascertained through controlled temperature program. Among these techniques, traditional differential scanning calorimetry (DSC) is a well-accepted technique for analyzing thermal transitions in condensed systems. Modulated DSC (MDSC) is used to study the same material properties as conventional DSC including: transition temperatures, melting and crystallization, and heat capacity. Further, MDSC also provides unique feature of increased resolution and increased sensitivity in the same measurement. “Hot disk thermal constant analyzer”, based on Transient Plane Source (TPS) technique, offers simultaneous measurement of thermal transport properties of specimen, which are directly related to heat conduction such as thermal conductivity (λ) and thermal diffusivity (χ). This method enables the thermal analysis on large number of materials from building materials to materials with high thermal conductivity like iron. The temperature range covered so far extends from the liquid nitrogen point to 1000 K and should be possible to extend further. This review also presents some interesting results of phase transition temperature of miscible (CPI/TPI) and immiscible (PS/PMMA) polymeric systems carried out through dynamic mechanical analyzer along with the thermal transport properties obtained for cis-polyisoprene (CPI), trans-polyisoprene (TPI), and their blends determined by TPS technique.     

Online measurement of thermal diffusivity during cure of an epoxy composite

Thermal diffusivity was measured online during cure of an epoxy composite using a method somewhat similar to the Ångström Method. It is shown that a simple experimental setup can be used, thus avoiding expensive instrumentation. The experimental instrumentation is explained in detail. The measurements show an increase of thermal diffusivity during the cure of composite material. Using modulated differential scanning calorimetry (MDSC), heat capacity was measured online during the cure of an epoxy composite. Combining thermal diffusivity measurements with MDSC measurements, the thermal conductivity was found to change during the cure process, similar to the measurements of heat capacity. These changes are referred to vitrification at the end of the cure process.