Advances in screening enzyme inhibitors by capillary electrophoresis

Capillary electrophoresis (CE) has attracted lots of attention due to its simplicity, low sample consumption, low solvent volume, high resolution, and high speed. Based on these advantages, it has been widely used in enzyme inhibitor screening. There are two main operation modes on enzyme inhibitor screening: off‐line (precapillary enzyme assays) in which process CE was used as an analytical tool; online (in‐capillary enzyme assays) which combined the sample injection, mix, reaction, separation, and detection within a single run. Additionally, diverse of new materials were introduced to immobilize enzyme, which has been coupled with CE for the study of enzyme activity and its inhibitor screening. This review gives an overview of the developments and applications for the CE‐based enzyme inhibitor screening.     

A clinical trial for therapeutic drug monitoring using microchip-based fluorescence polarization immunoassay

Microchip analysis is a promising method for therapeutic drug monitoring. This led us to evaluate a microchip-based fluorescence polarization immunoassay (FPIA) system for point-of-care testing on patients being treated with theophylline. The sera were collected from 20 patients being treated with theophylline. Fluorescence polarization was measured on the microchip and theophylline concentrations in serum were obtained. Regression analysis of the correlations was done between the results given by the microchip-based FPIA and the conventional cloned enzyme donor immunoassay (CEDIA), and between the results given by the microchip-based FPIA and the conventional particle-enhanced turbidimetric inhibition immunoassay (PETINIA). We successfully carried out a quantitative analysis of theophylline in serum at values near its therapeutic range in 65 s. The results obtained by the microchip-based FPIA correlated well with CEDIA and PETINIA results; the correlation coefficients (R ²) were 0.986 and 0.989, respectively. The FPIA system is a simple and rapid method for point-of-care testing of drugs in serum, and its accuracy is the same as the conventional CEDIA and PETINIA. It is essential to use real samples from patients and to confirm good correlations with conventional methods for a study on the realization of microchip.     

Microchip-based capillary electrophoresis for determination of lactate dehydrogenase isoenzymes

This article describes a novel microchip-based capillary electrophoresis and oncolumn enzymatic reaction analysis protocol for lactate dehydrogenase (LDH) isoenzymes with a home-made xenon lamp-induced fluorescence detection system. A microchip integrated with a temperature-control unit is designed and fabricated for low-temperature electrophoretic separation of LDH isoenzymes, optimal enzyme reaction temperature control, and product detection. A four-step operation and temperature control are employed for the determination of LDH activity by on-chip monitoring of the amount of incubation product of NADH during the fixed incubation period and at a fixed temperature. Experiments on the determination of LDH standard sample and serum LDH isoenzymes from a healthy adult donor are carried out. The results are comparable with those obtained by conventional CE. Shorter analysis times and a more stable and lower background baseline can be achieved. The efficient separation of different LDH forms indicates the potential of microfluidic devices for isoenzyme assay.     

High-throughput characterization for organic pollutants in environmental waters using a capillary electrophoresis chip.

To evaluate organic pollution in water, we did preliminarily studies on high-throughput characterization of organic pollution in water using microchip-based capillary electrophoresis (CE) with laseer-induced fluorescence (LIF) detection. The applied voltage was investigated to control the gated valve injection and CE separation for conventional cross type microchips using a self-made personal computer (PC)-based controller as the voltage supply. We obtained high-throughput data for the reproducible separation of fluorescein isothiocyanate (FITC)-labeled river-water samples using a zwitter-ion based buffer solution to avoid adsorption of the labeled sample onto the channel of a microchip made from quartz glass. We used real samples from the Hino River that flows into Lake Biwa, from ten sampling points and obtained several reproducible peaks in different separation patterns for each sample within 2 min. We successfully demonstrated high-throughput characterization of dissolved organic carbon (DOC) in environmental water using the microchip.     

A capillary electrophoresis assay for the fibrinolytic agent,eminase

Summary Capillary electrophoresis (CE) has been used to develop a method that allows analysis for all the main components of Eminase. This technique has also resolved the two glycosylated forms of lys-plasminogen. Quantitative CE analysis of concentration levels of this enzyme complex have been directly compared to those obtained from a bio-assay. A linear relation between the two methods has been demonstrated. Moreover, the CE method is highly reproducible, combines precision with speed, and allows quantitative analysis of the other protein components (streptokinase and human serum albumin) in Eminase.EMINASE is a trade name of SmithKline Beecham.     

Development of a microchip capillary electrophoresis method for determination of the purity and integrity of mRNA in lipid nanoparticle vaccines

Messenger RNA (mRNA)-based vaccines are advantageous because they can be relatively quicker and more cost efficient to manufacture compared to other traditional vaccine products. Lipid nanoparticles have three common purposes: delivery, self-adjuvanting properties, and mRNA protection. Faster vaccine development requires an efficient and fast assay to monitor mRNA purity and integrity. Microchip CE is known to be a robust technology that is capable of rapid separation. Here, we describe the development and optimization of a purity and integrity assay for mRNA-based vaccines encapsulated in lipid nanoparticles using commercial microchip-based separation. The analytical parameters of the optimized assay were assessed and the method is a stability indicating assay.     

Recent advances in microchip-based methods for the detection of pathogenic bacteria

Pathogenic bacteria pose a global threat to public health and attract considerable attention in terms of food safety. Rapid and highly sensitive strategies for detecting pathogenic bacteria must be urgently developed to ensure food safety and public health. Microchips offer significant advantages for pathogenic bacterial detection in terms of speed and sensitivity compared with those of traditional techniques. Microfluidic devices, in particular, have attracted significant attention for the dete...     

Simple and Rapid Procedure for “Sandwich” Enzyme ImmunoAssay Development Using Biotin Labeled Microwells (AvidPlate-Biotin)

Abstract

We have developed a rapid and simple protocol for the development of sandwich enzyme immunoassays utilizing a modified microwell plate carrying biotin on its surface, Aviplate-Biotin. A single polyclonal antibody is conjugated with either a reporter enzyme or with biotin. These conjugates are mixed with antigen to form a ternary complex containing both enzyme and biotin tagged antibodies; this complex is then specifically captured by Aviplate-Biotin that has been treated with avidin. Once optimized the assay can be completed in slightly over 2 hours using conventional enzyme immunoassay instrumentation.     

Microchip CE‐LIF method for the hydrolysis of L‐glutamine by using L‐asparaginase enzyme reactor based on gold nanoparticle

l ‐Asparaginase (l ‐Asnase) can suppress the growth of malignant cells by rapid depletion of two essential amino acids, l ‐glutamine (l ‐Gln) and l ‐asparagine (l ‐Asn). To study the cytotoxic effect and the secondary complications of l ‐Asnase in the treatment of acute lymphoblastic leukemia, the development of a novel enzyme reactor of l ‐Asnase for the hydrolysis of l ‐Gln, employing the enzyme‐gold nanoparticle conjugates in capillary, was reported in this work. First, a microchip CE (MCE)‐LIF was established for the separation of l ‐amino acids (l ‐Gln and l ‐glutamic acid) and studying the hydrolysis of l ‐Gln by using l ‐Asnase enzyme reactor. Then, using l ‐Gln as target analyte, the enzyme kinetics of l ‐Asnase in free solution, enzyme‐gold nanoparticle conjugates (E‐GNP), and the enzyme‐gold nanoparticle conjugates immobilized in capillary (E‐GNP‐C) were investigated in detail with the proposed MCE‐LIF method. Moreover, for optimizing the enzymatic reaction efficiency, three important parameters, including the length of capillary, the enzyme concentration reacted with gold nanoparticle and the amount of l ‐Asnase immobilized on the gold nanoparticle, have been studied. Owing to the high specific activity, the E‐GNP‐C enzyme reactor exhibited the best performance for the hydrolysis of l ‐Gln.     

Development of a fast and efficient CE enzyme assay for the characterization and inhibition studies of α‐glucosidase inhibitors

The inhibition of the α‐glucosidase enzyme plays an important role in the treatment of diabetes mellitus. We have established a highly sensitive, fast, and convenient CE method for the characterization of the enzyme and inhibition studies of α‐glucosidase inhibitors. The separation conditions were optimized; the pH value and concentration of the borate‐based separation buffer were optimized in order to achieve baseline separation of p‐nitrophenyl‐α‐d ‐glucopyranoside and p‐nitrophenolate. The optimized method using 25 mM tetraborate buffer, pH 9.5, was evaluated in terms of repeatability, LOD, LOQ, and linearity. The LOD and LOQ were 0.32 and 1.32 μM for p‐nitrophenyl‐α‐d ‐glucopyranoside and 0.83 and 3.42 μM for p‐nitrophenolate, respectively. The value of the Michaelis–Menten constant (K_m) determined for the enzyme is 0.61 mM, which is in good agreement with the reported data. The RSDs (n = 6) for the migration time was 0.67 and 1.83% for substrate and product, respectively. In the newly established CE method, the separation of the reaction analytes was completed in <4 min. The developed CE method is rapid and simple for measuring enzyme kinetics and for assaying inhibitors.     

Capillary electrophoresis-based immunoassays: principles and quantitative applications

The use of CE as a tool to conduct immunoassays has been an area of increasing interest over the last decade. This approach combines the efficiency, small sample requirements, and relatively high speed of CE with the selectivity of antibodies as binding agents. This review examines the various assay formats and detection modes that have been reported for these assays, along with some representative applications. Most CE immunoassays in the past have employed homogeneous methods in which the sample and reagents are allowed to react in solution. These homogeneous methods have been conducted as both competitive binding immunoassays and as noncompetitive binding immunoassays. Fluorescent labels are most commonly used for detection in these assays, but enzyme labels have also been utilized for such work. Some additional work has been performed in CE immunoassays with heterogeneous methods in which either antibodies or an analog of the analyte is immobilized to a solid support. These heterogeneous methods can be used for the selective isolation of analytes prior to their separation by CE or to remove a given species from a sample/reagent mixture prior to analysis by CE. These CE immunoassays can be used with a variety of detection modes, such as fluorescence, UV/Vis absorbance, chemiluminescence, electrochemical measurements, MS, and surface plasmon resonance.     

Capillary electrophoresis with laser-induced fluorescence detection as a tool for enzyme characterization and inhibitor screening.

An effective, rapid and economical CE/LIF (capillary electrophoresis/laser-induced fluorescence) method was developed and applied to the characterization of signal peptidase (SPase) enzyme, which is a target for the screening of new drug candidates. In this method, CE separates the product from the substrate and LIF selectively detects the fluorescence-labeled product and substrate. By measuring the increase of the product as a function of time, one can monitor the progression of the enzyme reaction. The progression curves were also used for screening inhibitors for this enzyme. The effects of various reaction conditions were also studied and discussed. In addition, this CE/LIF method was applied to the determination of the enzyme activity, the quality control of the substrate and/or enzymes, and the cross-reactivity of inhibitors to the enzyme. It can be concluded that this method is suitable for high throughput screening (HTS) assays because it can deliver fast, sensitive, quantitative, and reliable results.     

Determination of enzymatic activity and properties of secretory phospholipase A2 by capillary electrophoresis.

A capillary electrophoretic (CE) system coupled with a diode array UV detector was used for the assay of secretory phospholipase A2 (sPLA2) activity. This method is based on monitoring both the breakdown of substrates and the formation of products simultaneously using micellar electrokinetic chromatographic techniques. Under our developed separation conditions, we analyzed the substrates and products quantitatively, and investigated enzyme activity as a function of reaction time and presence of enzyme activator or inhibitor. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was also utilized to confirm the phosphatidylcholine, a substrate of sPLA2. In order to test the feasibility of the developed method for measurement of enzymatic activity, we compared it to the conventional radioactive assay method for sPLA2. On the basis of our results, the conventional method can be complemented, or even replaced, by this new CE method which possesses the advantages of short analysis time, use of non-radiolabeled and inexpensive substrates, simple measurement of enzymatic activity, and exact quantitation of substrate and product.     

Human liver dihydrodiol dehydrogenase 1-catalyzed reaction generating 9alpha,11beta-prostaglandin F2 from prostaglandin D2 followed by micellar electrokinetic chromatography

An enzyme reaction converting prostaglandin D2 (PGD2) into 9alpha,11beta-prostaglandin F2 (9alpha,11beta-PGF2) by a human liver-originated recombinant dihydrodiol dehydrogenase 1 (DD1) has been studied using CE. Four prostaglandins, viz. PGD2, 9alpha,11beta-PGF2, PGE2, and PGF2a (see Fig. 1, the latter two major PGs are possibly coexisting compounds in the assay mixtures), were completely separated by using SDS or PEG as buffer additives. Because analysis times in the SDS system were shorter than in the PEG system, SDS was employed in measurements of the enzyme activity of DD1. The pH dependence and the reaction temperature dependence of enzyme activity have been studied. The present method enabled us to detect all of the participants in the enzyme reaction: PGD2, 9alpha,11beta-PGF2, nicotinamide adenine dinucleotide phosphate (NADPH), and NADP+. Thus, direct, comprehensive, and reliable analysis of the enzyme reaction becomes possible. Enzyme activity has hitherto been estimated indirectly from the decrease of fluorescence derived from NADPH as an index of progress of the enzyme reactions in batch methods employed in conventional studies. In addition, the low sample consumption characteristic of CE should be a significant advantage of the present method in characterization of less commonly available enzymes such as the recombinant species used in this work.     

基于DNA定向固定化技术构建毛细管固定化酶微反应器的研究进展

生物酶影响着物质代谢和质能转换等生命活动,生物体内某些酶的活性变化会导致疾病的发生。发展新型的酶分析方法对深刻理解生物代谢过程、疾病诊断和药物研发等具有重要意义。毛细管电泳（CE）具有分离效率高、分析速度快、操作简单和样品消耗少以及可与多种检测手段联用等优点,在酶分析研究中越来越受到关注。CE酶分析主要包括离线和在线两种模式,其中,固定化酶微反应器与毛细管电泳联用（CE-IMER）的在线酶分析已经成为主要的酶分析方法之一。CE-IMER充分结合了固定化酶和CE的优势,将游离酶固定在毛细管内,不仅可以显著提高酶的稳定性和重复使用性,而且可以实现纳升规模溶液的自动化酶分析,进而显著降低酶分析成本。目前已有大量方法制备IMER用于CE酶分析,然而如何构建性能良好、可再生使用、酶固载量大、自动化程度高的CE-IMER一直是该领域重点研究的问题。DNA定向固定化技术（DDI）可以充分利用DNA分子的碱基互补配对（A-T,C-G）,在温和的生理条件下特异性固定生物大分子。由于短链双螺旋DNA分子具有较强的机械刚性和物理化学稳定性,通过DDI将酶固定在载体表面,有利于降低传质阻力,提高酶与底物的接触能力,进而促进酶促分析过程。该文主要综述了利用DDI构建新型IMER在CE酶分析中的应用现状,并对其未来发展进行了展望。     

High temporal resolution monitoring of enzyme reaction and inhibition using optically gated vacancy capillary electrophoresis and immobilized enzyme

A novel method for monitoring of enzyme reaction and inhibition with high temporal resolution was developed by using optically gated vacancy capillary electrophoresis (OGVCE) with laser-induced fluorescence (LIF) detection and immobilized enzyme. Trypsin cleavage reaction and inhibition were investigated by the presented OGVCE-LIF assay, using carboxyfluorescein (FAM) end-labeled Angiotensin as the substrate and commercially available immobilized trypsin. The substrate and the product were continuously loaded into the capillary by the electroosmotic flow while the immobilized enzyme remained in the sample vial. Substrate consumption and product formation were monitored simultaneously at 5 s interval during the whole reaction time. The enzymatic reaction rates obtained from the substrate and the product were highly consistent. The enzyme activity and the Michaelis constants of trypsin cleavage reaction, as well as the inhibition constant (for reversible competitive inhibitor) and the inhibition fraction (for irreversible inhibitor), were obtained. It was showed that the reported OGVCE-LIF method can perform fast, accurate, sensitive and reproducible CE enzyme assay with high temporal resolution, thus has great potential in application of the enzyme-substrate systems with fast reaction rate and the fluorescent substrate and products.     

基于PMMA毛细管电泳芯片的多位点突变检测研究

利用基于激光诱导荧光(LIF)检测的芯片毛细管电泳平台,批量制作了低成本聚甲基丙烯酸甲酯(PMMA)芯片,通过修饰管道,优化有效分离距离、分离介质等条件,可在90s内完成DNA片段的分离检测,实现单碱基分离,并在此平台上成功地对遗传性耳聋三个常见突变位点实现分型检测,为这种低成本的PMMA芯片应用于分型相关的临床诊断领域奠定了基础。     

Simultaneous LIF and retro-reflected beam interference detection for CE

This Short Communication describes a novel optical detection method for CE, based on the combination of LIF detection and retro-reflected beam interference detection. By the use of a side-illuminated laser beam, an on-column multifunctional detection for CE has been developed, and some key elements in the scheme have been optimized. In addition, two miscellaneous samples including fluorescent dyes, carbohydrates and amino acids have been determined to evaluate its performance. Without any additional pretreatment, sufficient LOD and linear ranges have been achieved for most analytes. Its performance in retro-reflected beam interference detection is better than those mentioned in a former report, and its fluorescent sensitivity is comparable with the achievable sensitivity by conventional LIF systems, all of which together combine high sensitivity and universal analysis to a certain extent.     

毛细管电泳序列分析技术用于在线酶分析研究进展

毛细管电泳技术具有操作简单、样品消耗量少、分离效率高和分析速度快等优势,不仅是一种高效的分离分析技术,而且已经发展成为在线酶分析和酶抑制研究的强有力工具。酶反应全程的实时在线监测,可以实现酶反应动力学过程的高时间分辨精确检测,以更准确地获得反应机制和反应速率常数,有助于更好地了解酶反应机制,从而更全面深入地认识酶在生物代谢中的功能。此外,准确、快速的在线酶抑制剂高通量筛选方法的发展,对加快酶抑制类药物的研发以及疾病的临床诊断亦具有重要意义。电泳媒介微分析法（EMMA）和固定化酶微反应器（IMER）是毛细管电泳酶分析技术中常用的在线分析方法。这两种在线酶分析法的进样方式通常为流体动力学进样和电动进样,无法实现酶反应过程中的无干扰序列进样分析。近年来,基于快速序列进样的毛细管电泳序列分析技术已经发展成为在线酶分析的另一种强有力手段,以实现高时间分辨和高通量的酶分析在线检测。该文从快速序列进样的角度,综述了近年来毛细管电泳序列分析技术在线酶分析的研究进展,并着重介绍了各种序列进样方法及其在酶反应和酶抑制反应中的应用,包括光快门进样、流动门进样、毛细管对接的二维扩散进样、流动注射进样、液滴微流控进样等。     

Carbon nanotube and diamond as electrochemical detectors in microchip and conventional capillary electrophoresis

As two important polymorphs of carbon, carbon nanotube (CNT) and diamond have been widely employed as electrode materials for electrochemical sensing. This review focuses on recent advances and the key strategies in the fabrication and application of electrochemical detectors in microchip and conventional capillary electrophoresis (CE) using CNT and boron-doped diamond. The subjects covered include CNT-based electrochemical detectors in microchip CE, CNT-based electrochemical detectors in conventional CE, boron-doped diamond electrochemical detectors in microchip CE, and boron-doped diamond electrochemical detectors in conventional CE. The attractive properties of CNT and boron-doped diamond make them very promising materials for the electrochemical detection in microchip and conventional CE systems and other microfluidic analysis systems.